Printing from ITS a custom ALV report

Dear All,
If anybody has any ideas on the following topic it would be appreciated.
We have written a custom report that outputs in ALV, this is then rendered as service on our ITS server.
The problem is that when you try to print the frame using standard browser printing it only prints what is on the screen.
Are there any techniques to use to allow printing of all data that is returned to the browser?
Thanks
Matt

Hi Matt,
Printing from within the browser is always problematic. Therefore such print jobs are normally done by the SAP system and not by the browser. I would recommend to use the print button of the ALV grid for such printouts. You may either do a print out using a printer connected to the SAP system or may select a PDF printer. Using the PDF printer you can print out using your local printer connected to the PC. You may want to check note 351230 for systems with a basis up to release 6.20 and note 771683 for systems 6.40 and higher.
Best regards,
Klaus

Similar Messages

Printing a Special Message in ALV Report

Hi,
I have a requirement to print a special message in an ALV report. Customer wants to see this single line message between Report Header and ALV grid. This is a dynamic message to be displayed based on the values in the ALV table. Please suggest me with a suitable solution.
Thanks,
Kannan

Hello Kannan,
if you are using OOPs ABAP to create this ALV then you can put a text field in your Calling screen just above the "Custom Control" Area. make the text area output only.
Now you can pass a variable data to this screen variable from your program.
change the value of this variable based on your condition on PBO part of the called screen.
OR
In case you are using REUSE_AVL then you need to pass the value at.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
OR
* Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
* Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
* User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
* Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
* Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
* Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
Please pass your variable data that you need to the parameter w_status.
Please give points if you find solution helpful.
Cheers,
Suvendu

Supress Background Print parameters when user executes ALV report by F9

Hi friends,
How can we Supress Background Print parameters pop-up, when user executes ALV report by F9
or by navigation from selection screen -i.e; Program ->>Execute in Background.
Please guide me
Thanks in Advance,
Ganesh

Sorry,
i need to supress the POP-UP which asks for background Print Parameters in the ALV report. when i press F9 in a selection - screen of a Tcode
as we supress Pop-up for a smartform or script by passing the Print Parameters
This 'RS_SET_SELSCREEN_STATUS' excludes the commands(say F9 function code) in report
I think we need to set the Print paramters in the Program
please guide me
Thanks,
Ganesh

How to print the Grid title in ALV Report?

Hi All,
I write ALV Report.When i am going to print this report it is not printing the Grid Header(ie.Title ).even in Print Preview Also i m not getting the title.It shows the Gird with Values.How Can i print the title Also...
Regards,Ravi

Hi,
u will declare the data as below like this
DATA: LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
        TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA : ST_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
         IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
         ST_EVENT TYPE SLIS_ALV_EVENT,
         IT_EVENT TYPE SLIS_T_EVENT.
DATA : ST_LIST TYPE SLIS_LISTHEADER,
         IT_LIST TYPE SLIS_T_LISTHEADER,
         IT_LIST1 TYPE SLIS_T_LISTHEADER,
         IT_LIST2 TYPE SLIS_T_LISTHEADER.
START-OF-SELECTION.
IF G_FLAG = SPACE.
W_REPID = SY-REPID.
G_TOP_PAGE = 'TOP-PAGE'.
      ST_LIST-INFO = ' Title Name '.
      APPEND ST_LIST TO IT_LIST.
      ST_LIST-INFO = ' second Name'.
      APPEND ST_LIST TO IT_LIST.
    ELSE.
ENDIF.
FORM TOP-PAGE .
DATA: V_LOGO(15).
    V_LOGO = 'LOGO'.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = IT_LIST
      I_LOGO             = V_LOGO.
    I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP-PAGE

How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

Print Selection Screen Parameters in ALV report only once

Does anyone know how to print the selection screen within a ALV report.
I've tried everything. I have the code to capture the selection parameters into a internal table. I can use top_of_page but I only want it printed once.

Hi,
If you have captured the selection screen entries in an internal table, then you could display it once by using the BLOCK LIST ALV.
Check the function module.
REUSE_ALV_BLOCK_LIST_DISPLAY
Using this function module more than 1 alv could be display in the report.
In our case ..there will be two alvs ...one for the selection screen n other for the main report output.
Check the following example on the block List ALV....
<b>BALVBT01</b>.
Regards,
Vara

How to design Customized ALV report like normal report !

Hello Friends,
              I like to design a ALV report, with sub headers, sub totals, summary total and other summary details like percentage sale, which is not relavent to the fields displayed in the ALV.
I know it is possible to get total of the displayed field, but is it possible to design flexible ALV report like normal report.
Could U please provide example code, if available.
Thank you,
Senthil

HI,
Just check this example.
REPORT ZLAXMI_ALVEXER2 MESSAGE-ID ZZ                       .
*& TABLES DECLARATION                                                  *
TABLES: VBAK.
*& TYPE POOLS DECLARATION                                              *
TYPE-POOLS: SLIS.
*& INTERNAL TABLE DECLARATION                                          *
DATA: BEGIN OF ITAB OCCURS 0,
       ICON TYPE ICON-ID,
       VBELN LIKE VBAK-VBELN,
       AUDAT LIKE VBAK-AUDAT,
       VBTYP LIKE VBAK-VBTYP,
       AUART LIKE VBAK-AUART,
       AUGRU LIKE VBAK-AUGRU,
       NETWR LIKE VBAK-NETWR,
       WAERK LIKE VBAK-WAERK,
    END OF ITAB.
*INTERNAL TABLE FOR FIELD CATALOG
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
           WITH HEADER LINE,
*INTERNAL TABLE FOR EVENTS
DATA:    IT_EVENT TYPE SLIS_T_EVENT,
      WA_EVENT TYPE SLIS_ALV_EVENT,
*INTERNAL TABLE FOR SORTING
      IT_SORT TYPE SLIS_T_SORTINFO_ALV,
      WA_SORT TYPE SLIS_SORTINFO_ALV,
*INTERNAL TABLE FOR LAYOUT
      WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
*& VARIABLE DECLARATION                                                *
DATA : V_REPID TYPE SY-REPID,
       V_PAGNO(4) TYPE N,
       V_DATE(8) TYPE C.
*& CONSTANTS                                                           *
CONSTANTS: C_X TYPE C VALUE 'X'.
*& SELECTION SCREEN                                                    *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN,
                S_VBTYP FOR VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN: END OF BLOCK B1.
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-003.
PARAMETERS: P_LIST RADIOBUTTON GROUP RAD1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-004.
PARAMETERS: P_GRID RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK B2.
AT SELECTION-SCREEN.
PERFORM VALIDATE_SCREEN.
*& START OF SELECTION                                               *
START-OF-SELECTION.
CLEAR: ITAB, ITAB[].
V_REPID = SY-REPID.
PERFORM GET_DATA.
PERFORM DISPLAY_DATA.
*& END OF SELECTION                                                    *
END-OF-SELECTION.
*--DO ALV Process
V_REPID = SY-REPID.
*--Sort the Output Fields
PERFORM SORT_FIELDS.
*--Build Field catalog for the Output fields
PERFORM BUILD_FIELDCAT.
*--Set the Layout for ALV
PERFORM SET_LAYOUT.
*&      Form GET_DATA
      text
TO GET THE DATA FROM TABLES INTO ITAB
FORM GET_DATA .
SELECT VBELN
         AUDAT
         VBTYP
         AUART
         AUGRU
         NETWR
         WAERK
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM VBAK
         WHERE VBELN IN S_VBELN AND
         AUDAT > '04.04.2005'
         AND NETWR > 0.
LOOP AT ITAB.
    IF ITAB-NETWR < 10000.
      ITAB-ICON = '@08@'.
    ELSEIF ITAB-NETWR > 10000 AND ITAB-NETWR < 100000.
      ITAB-ICON = '@09@'.
    ELSEIF ITAB-NETWR > 100000.
      ITAB-ICON = '@0A@'.
    ENDIF.
    MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
ENDFORM.                    " GET_DATA
*&      Form sort_fields
FORM SORT_FIELDS .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'VBTYP'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM.                    " sort_fields
*&      Form build_fieldcat
*FORM BUILD_FIELDCAT .
IT_FIELDCAT-COL_POS    = '1'.
IT_FIELDCAT-FIELDNAME = 'ICON'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'LIGHT'.
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '2'.
IT_FIELDCAT-FIELDNAME = 'VBELN'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'SALES DOC NUMBER'(009).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '3'.
IT_FIELDCAT-FIELDNAME = 'AUDAT'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT DATE'(010).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '4'.
IT_FIELDCAT-FIELDNAME = 'VBTYP'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'CATEGORY'(011).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '5'.
IT_FIELDCAT-FIELDNAME = 'AUART'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT TYPE'(012).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '6'.
IT_FIELDCAT-FIELDNAME = 'AUGRU'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'Order reason'(013).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '7'.
IT_FIELDCAT-FIELDNAME = 'NETWR'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'NET VALUE'(014).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '8'.
IT_FIELDCAT-FIELDNAME = 'WAERK'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'SD DOC CURR'(015).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
*ENDFORM.                    " build_fieldcat
*&      Form set_layout
FORM SET_LAYOUT .
IF P_LIST = C_X .
    WA_LAYOUT-WINDOW_TITLEBAR = 'LIST DISPLAY'(016).
    WA_LAYOUT-ZEBRA = 'X'.
*-- ALV LIST DISPLAY
    PERFORM LIST_DISPLAY TABLES ITAB.
*-- ALV GRID DISPLAY
ELSEIF P_GRID = C_X.
    WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'(017).
    WA_LAYOUT-ZEBRA = 'X'.
    PERFORM GRID_DISPLAY TABLES ITAB.
ENDIF.
ENDFORM.                    " set_layout
*&      Form list_display
FORM LIST_DISPLAY TABLES   P_ITAB .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = V_REPID
      IS_LAYOUT          = WA_LAYOUT
      IT_FIELDCAT        = IT_FIELDCAT[]
      IT_SORT            = IT_SORT[]
      I_SAVE             = 'U'
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " list_display
*&      Form GRID_DISPLAY
FORM GRID_DISPLAY TABLES   P_ITAB .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = V_REPID
      IS_LAYOUT          = WA_LAYOUT
      IT_FIELDCAT        = IT_FIELDCAT[]
      IT_SORT            = IT_SORT[]
      IT_EVENTS          = IT_EVENT
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GRID_DISPLAY
*&      Form VALIDATE_SCREEN
      text
--> p1        text
<-- p2        text
FORM VALIDATE_SCREEN .
DATA: LV_VBELN LIKE VBAK-VBELN.
IF NOT S_VBELN IS INITIAL.
    SELECT VBELN
    INTO LV_VBELN
    UP TO 1 ROWS
    FROM VBAK
    WHERE VBELN IN S_VBELN.
    ENDSELECT.
    IF SY-SUBRC <> 0.
      MESSAGE E000 WITH 'INVALID SALES DOC'.
    ENDIF.
ENDIF.
ENDFORM.                    " VALIDATE_SCREEN
*&      Form display_data
      text
--> p1        text
<-- p2        text
FORM DISPLAY_DATA .
DEFINE M_FIELDCAT.
    ADD 1 TO WA_FIELDCAT-COL_POS.
    WA_FIELDCAT-FIELDNAME   = &1.
    WA_FIELDCAT-REF_TABNAME = 'VBAK'.
    WA_FIELDCAT-DO_SUM      = &2.
    WA_FIELDCAT-CFIELDNAME = &3.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
END-OF-DEFINITION.
DATA:
    LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
M_FIELDCAT 'ICON' '' ''.
M_FIELDCAT 'VBELN' '' ''.
M_FIELDCAT 'AUDAT' '' ''.
M_FIELDCAT 'VBTYP' '' ''.
M_FIELDCAT 'AUART' '' ''.
M_FIELDCAT 'AUGRU' '' ''.
M_FIELDCAT 'NETWR' 'C' 'WAERK'.
M_FIELDCAT 'WAERK' '' ''.
ENDFORM.                    " display_data
Regards
Laxmi

How to Get Default Printer from ITS

Hi all,
I want to get the default printer name when i run application thru ITS ..
I have function module RSPO_FRONTEND_PRINTERS_FOR_DEV which shows the default printer available in the system but it is in SAPGUI and which dont work for ITS applications.
Does any body knows the function which brings Default printer in ITS . I appreciate your answers . I Appreciate your responses.
Thanks
Pradeep Reddy

With PrintGetPrinters(), I can get all printer in the list. If it is a bug, where to get the patch for 11.5?
My pb build is 11.5.1 4608.
Also, another alternative solution to get default printer with pb 11.5.1?
Another is: is Pb 11 and Pb 12 can be installed on windows XP side by side?

Printing from ITS report

Hello,
When the users are printing reports from the ITS it prints only the first page.
Is there a way to print all the report?
We dont have a portal.
Please Advice,
David

Have a look at note 351230 - it describes an option for sending the print output via the ITS to the browser as a PDF, which can then be printed with the standard Adobe Reader functions. It looks pretty much identical to the report as seen on the screen.
You basically set up a new printer (e.g. LPDF) in the backend system and the users select that to generate the PDF. You do need the Webgui toolbars enabled so users can do the printing via SAP rather than the web browser. If you want a simpler version of the toolbars, have a look at note 1010519.
Regards,
John

Printing page numbers in an ALV report with multiple grids

Hi,
I have developed a report using OO ALV GRID. The output is having multiple grids navigated using a menu button appended to the standard tool bar
(Ref report: BCALV_GRID_07). On navigation, we are able to display specific titles when each grid is displayed.
When we print those individual pages (the grids), we are able to print the page numbers and the title for the first grid but when we display the next grid and print, we are unable to initialise the page number
and print specific title. The page numbers continues from the last printing.
I am looking at identifying the grid when the print event - PRINT_TOP_OF_PAGE is triggered so that a grid specific title can be printed and also page number initialised.
Any suggestions is highly appreciated.
Thanks.
Mani.

You cannot have one event for all the grids as you cannot identify for which grid the event has fired. You need to activate the event for each of the grid and handle the code independently.
regards,
Ravi
Note - Please mark the helpful answers

Need to print the company logo in alv report

Hi All ,
       I am displaying an alv grid for some QM report .
       I have used top-of-page event and   'REUSE_ALV_COMMENTARY_WRITE '    FM to display the logo and header . Every thing is working fine .
But when I am taking the print-out the logo is not getting printed . Except logo everything is coming in the print out.
So please help me if you have any idea ragarding how to print the logo in the report.
regards
Satish

print the logo is really simple, check this little sample:
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      i_logo             = 'Z_LOGO'
      it_list_commentary = gt_list_top_of_page.
and how to upload the logo in this link:
uploading logo
regards
Edited by: Sebastian Bustamante on Sep 24, 2008 3:26 PM

How to raise error message from PAI of oops ALV report

Hi All,
I have a requirement to raise error message form editable oops alv . After entering the data and then press SAVE button .
Please help.
Thanks in Advance

HI SK,
Write a Local class (Event Handeler) to handel the events. In Editable ALV once the user enter a value, CL_GUI_ALV_GRID will raise an event called DATA_CHANGED.
1. Define and Implement a local class to handle that event.
In the implementation of this class you need to get data from imported object to an internal table, then compare the same with the ALV output table.
* Local Class to handler the events raised from the ALV Grid
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
* Method to handel EDIT event, DATA_CHANGED of CL_GUI_ALV_GRID
METHODS : ON_DATA_CHANGE FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                       IMPORTING ER_DATA_CHANGED.
ENDCLASS.
* Event handler class Implementation
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD ON_DATA_CHANGE.
    DATA : LT_MODIFY TYPE LVC_T_MODI,
               LS_MODIFY TYPE LVC_S_MODI.
* Copying changed data into intenal table from Object
    LT_MODIFY = ER_DATA_CHANGED->MT_MOD_CELLS.
* Modifying the ouptut table with the changed values
    IF LT_MODIFY[] IS NOT INITIAL.
          *Compare the ALV Output table with LT_MODIFY
    ENDIF.
ENDMETHOD.
ENDCLASS.
Then raise a message on required condition in the same method.
Note: To trigger the above method, you need to set event handler before displaying ALV (before calling method SET_TABLE_FOR_FIRST_DISPLAY)
* Creating object for the Local event handler class
CREATE OBJECT GR_HANDLER.
* Set handler (call method of Event_handler) to handler Edit event
SET HANDLER GR_HANDLER->ON_DATA_CHANGE FOR GR_GRID.
Regards,
Vijay

Printing from ActiveX Control in crystal report 10 in IE7 not working

Hi,
I am using ActiveX Control for printing in Crystal Report version 10 using Java. When I click on print button, ActiveX control dialog box opens and then click print button, the dialog box shows it's printing and does not stop and there is no print on printer. If any body have idea to resolve this issue, kindly tell me as soon as possible.
Thanks in Advance,
Nasir Nawab

Hello,
CR 10 is not supported in IE7. It may work if you use the Legacy mode in IE7. Also check your pop-up blocker and allow ActiveX controls to be installed.
Thank you
Don

Refresh ALV Report after return from dialog screen

Hi All,
I have developed an alv report which lists new products, when user clicks on a product it will take to custom dialog screen where user makes neccessary changes. Once the changes are done user clicks back the control comes back to the ALV report.
My question is when they come back to ALV report it should refresh and list the new products. Basically I want to know is it possible to refresh the report when control is coming back from dialog screen to ALV report.
Pls provide me a best way to handle this scenario.
Regards,
Anand

Hi Archna
This is the code I am using
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = v_repid
      i_callback_user_command = 'USER_COMMAND'
      i_callback_top_of_page = 'TOP_OF_PAGE'
      i_grid_title            = i_title
      it_fieldcat             = it_fcat
      it_events               = v_events
      i_save                  = 'A'
    TABLES
      t_outtab                = it_alv_cvg.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&IC1'.
      READ TABLE it_alv_map INTO wa_alv INDEX rs_selfield-tabindex.
      IF sy-subrc = 0.
        SET PARAMETER ID 'ZCR' FIELD wa_alv-product.
        CALL TRANSACTION 'ZSD_PRODUCT_DIV' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.
After it goes to dialog when I clcik back it comes back to the alv report.
Now can you Pls tell me where to use the refresh.
Regards,
Anand

Print an ALV report in A3/A4

How to print the output of an ALV report in A3 and A4 size. The number of columns in the report are 49. Also the headings of the columns is too long, is there any way to word wrap these headings in to multiple lines?

You can customize printer with this formats but you can't establish more than one header in ALV

Printing from ITS a custom ALV report

Similar Messages

Maybe you are looking for