Printing indicator in mat. doc

Dear all,
When viewing a material document in MB03, it is found that the print indicator is selected, but none of the printing options: Individual Slip/Indiv.Slip w.Inspect.Text/Collective Slip is selected.
I just wonder how user could do so, as it is supposed that he has either select or not select the printing option in MIGO.
Is this a system bug?
Thanks in advance!

It is not a bug. some iuser would have ticked the print functionality while doing MIGO.
Thanks & regards,
Kiran

Similar Messages

  • Goods Receipt Collective Slip for Mat Doc is not printing

    HI All,
    I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
    I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
    I check the condition records in MN21, condition record is in place.
    I check in OMB5, for movement type and material document configuratio its there.
    I check in NACR, condition record is there.
    I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
    any help on this matter is highly appreciated.
    I check in SDN, Googled it, but no result.
    Thanks in Advance.

    check this
    2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
    This program copies the basic settings from the SAP standard client (000).
    from there:
    http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
    and check you have define some printer for the output.

  • While mat .doc archiving error

    Hi
    While mat .doc archiving i am getting error can not be archived due to Document
    not completed.
    How to find what are all the documents and how to correct the same ?
    Thanks
    Regards,
    Dhinesh

    Dear,
    Please go through the below:
    Archiving (transaction SARA)
    Data archiving removes bulk data which is no longer required in the System, but which must be retained accessibly, from the database. Data in the R/3 database can only be archived via archiving objects, which describe the data structure. Financial accounting documents, for example are archived via the archiving object FI_DOCUMNT, which comprises the document header, company-code-dependent postings, change documents, SAPscript texts and other elements. The application archiving objects are pre-defined in the system. The archiving programs are scheduled as background jobs, but can run during on-line processing. The system need not be shutdown.
    The archiving procedure comprises two main steps:
    Create archive files: the data to be archived are first written sequentially into a newly created file. The data then exist twice in the database. These archive files can, e.g. be passed to an archive system, via ArchiveLink.
    Execute delete program: the data in the archive files are removed from the database by the delete program.
    You can check how the archive filenames and archive destination are setup in transaction FILE
    Always remembers to check the setting before any archiving.  The settings will determine things like whether the delete programs will start automatically.  (it is not advisable to start your delete programs automatically).
    You can configure all the customizing settings with transaction AOBJ - Archive Objects.
    MM_MATBEL - Archive material document
    OMB9 - Archiving - Material document retention period.
    The default documents life is 200 days.  You need to maintain the documents life for each Plant in your company before you can start archiving.  If you did not maintain, you will get a list with 'Valid.period not maintained for tr./ev. type of doc.'.
    MM_ACCTIT - Archive accounting interface tables
    The documents store in the table are for applications which are to be supplied with the posting data at a later date of MM Inventory Management and MM Invoice Verification.
    If you are using 3.x, this archiving object might not be found. You need to import it from sapservX. Read note 89324, 99388, 83076.
    Take a look at OSS note 48009 for the detail explanation of which data is updated in the ACCT* tables.
    PP_ORDER - Archive production order
    OPJH - Production Order retention period. Maintain Retention 1 and 2.
    If your set your retention 1 and 2 as 10, that means that after 10 days of setting the delete flag then you can set the deletion indicator.  After 10 days of setting the deletion indicator then you can start archiving.  Therefore, to archive immediately, you can leave retention 1 and 2 as space.  Please take note that retention 1 and 2 act as a safety net if you happened to archive the wrong record.  You will have to decide whether to have the retention time gap or not.
    FI_DOCUMNT - Archive Financial Accounting Documents
    Maintain the account life      - transaction OBR7
    Maintain the documents life - transaction OBR8
    SD_VBRK - Archive Billing Documents
    There are no posting date or fiscal year/period selection.  You can only specify the billing documents date.  In order that you do not archive the wrong record, you have to write a ABAP query or report to print out the various billing documents number ranges you want to archive.  You can extract the data from table
    VBRK - Billing: Header Data.
    VN01 - Check all the number ranges for Billing Documents.
    Click Overview buttom or Hold the Shift key and press F7.
    RV_LIKP - Archiving Deliveries
    VORL - Maintain the retention period. Number of days which must have elapsed since the delivery was created, before the delivery can be archived.
    VLAL - Archive deliveries
    Regards,
    Syed Hussain.

  • Print out of Material Doc

    Hello
    What is the process of configuring Std Print program for Material Document
    What are the steps
    Regards
    Niti Narayan

    Hi Niti,
    Chk your setting as below to get GR print out.
    . Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
    2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
    5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Regards

  • Error in mat doc after turning in the production in MFBF

    can anybody please help me with this issue. After the user has turned in production (thru MFBF), the material doc is getting posted. that is fine. Also there is output tab on the material doc and when we see the output there is an error that says
    Language  is not allowed
    Message no. TD604
    Diagnosis
    You want to edit a text. However, the text language specified does not exist.
    System Response
    Editing is rejected.
    Procedure
    The valid language keys are listed in Table T002. Please check the entries in this table.
    becuase of this error the user is not able to print labels. why this error would be cominng? can anybody help? I also checked in table T002 and we see that there are all kinds of languages, what i do not understand is what language it is talking about and what can we do about this
    Thanks
    Anusha

    OK i have checked the condition records in the MN22 for all key combinations, there are no condition records. now this problem does not seem to happen all the time. For some materials, there is no problem, and after the production is turned in the mat doc gets posted fine and the label also gets printed fine. It is only for certain materials this eems to happen, are there any settings in production version or BOM that might be causing this?
    Thanks
    Anusha

  • TDP / SD - error- posting value missing in mat doc

    Hi experts,
    Please help...
    I have two excise duty conditions ya02 and ya03 and they stand for excise duty value calculated via rate from OIH01 table and other is calculated based on the reduction % entered during delivery document respectively. So ya03 is zero initially when teh order is created, until a  % reduction is entered in the delivery document and from their a User exist calculates the reduction value and populates the ya03 condition type.
    Till here it is fine now when the PGI is done the value for ya02 is visible but ya03 is missing. Debugging shows that the system is looking for the value in OIH01 table. and when ED rate is maintained the value for ya03 is populated in the mat doc.
    1. Is their any user exit which can bypass this and pick up the value calculated in the condition type ya03?
    2. Any other suggested solution?
    regards,
    Vineet

    Entire material GR stock should be in storage location,before proceeding to next step.
    After cancelling invoice,Cancel material document,Post excise using J1IEX,Cancel excise using J1IEX.
    Now do necessary changes in p.o. Do GR,invoice.
    Edited by: Jeyakanthan A on Feb 24, 2011 8:50 PM

  • MIGO - NDR print indicator default to unchecked

    We would like to default the 'print' box in MIGO to always be unchecked when a user goes into the transaction.  There will be times when the user will check the box to print a label; however this will not be often.  Today, if a user checks the box, backs out of MIGO, then goes back into MIGO the box remains checked.  It's like it remembers whatever was set in that box previously.
    We've tried playing with the user parameter of NDR being set to 'X' (capital), or being set to blank, but it's like the parameter is not being read at all.  The screen is only remembering what we did last when we re-execute the transaction.  We've also tried playing with the GET/SET parameters in SE51, program SAPLMIGO screen 0110 - but again no luck.
    Am I missing something being set somewhere for the NDR parameter to be read?  Any tricks to get this to always default to unchecked?
    Thank you for the suggestions.

    I worked with ABAP'ers and it looks like this change was already in the enhancement section:
    Program: LMIGOKH1
    ENHANCEMENT-POINT HEADER_DEFAULTS_SET_02 SPOTS ES_SAPLMIGO.
    Set print indicator
      GET PARAMETER ID 'NDR' FIELD ps_gohead-xnapr.
    We also have this:
    Program: LMIGOHG2
        CHECK lcl_migo_globals=>kernel->s_action-create = abap_true."       307284
         REPLACE
        SET PARAMETER ID 'NDR' FIELD gohead-xnapr.
    The even more strange (frustrating) thing is that if we set a break point at the SET indicator in program LMIGOHG2, then the logic is picked up based on the user Parameter - not based on the last value that was entered.  However, if a breakpoint is set at the "get" section - it does not work.
    I may be sending this one to SAP. Thank you for your suggestions.

  • BAdi or User exit to use in MB26 to avoid posting before saving of mat doc?

    Hello Experts,
    Can anyone tell me which BAdi or User exit to use in MB26 to avoid posting before saving of material document?
    I have requirement to stop posting incase of negative invetory in issuing storag location.
    Thanks

    Hello,
    The issue is currently we alllowing the negetaive stock at storage location level.At this movement , we want to avoid the negetive stock creation while posting the Mat doc with MB26.Before saving the material document I want check the stock levels in MARD , if the stock levels goes negative from this posting, then I want to stop the document posting.
    Thanks

  • .error Print indicator 029 not defined. Message no. L3118.

    error Print indicator 029 not defined. Message no. L3118
    Hello everyone.
    I need some help.
    when i run program RLVSD40 (Initiate printing of transfer order).
    i got error.
    Print indicator 029 not defined
    Message no. L3118
    what should i do to solve this error ?
    please help.

    Hello,
    I am getting the same issue.
    Please let me know the solution.

  • Printing of transfer order . error Print indicator 029 not defined.

    Hello everyone.
    I need some help.
    when i run program RLVSD40 (Initiate printing of transfer order).
    i got error.
    Print indicator 029 not defined
    Message no. L3118
    what should i do to solve this error ?
    please help...

    is 029 your warhouse?
    if so then SAP found a record with print indicator "blank" , but this "blank" print indicator is not defined in OMLV.

  • MIGO,MB1B, print indicator should be default

    Hello
    MIGO and MB1B transcations, print indicator is not selecting automatically. why?
    background:
    In user profile (SU01D), paramater NDR was maintianed correctly.
    eventhough user is having NDR parameter, but he is not able to see the print indicator automatically??
    in additioon , if they give manually print indicator for individual slip /collective silp, out is saved. and output is displayed in green color in GR iteam leavel "Message" tab.It means output setting are correctly maintained.
    even i tested with my user id..if i dlete the NDR to my id, it is not working.
    again i added NDR parameter, now it is correctly.
    Question: In production already user was maintained with NDR parameter, but he is not able to see the print automatically.
    so shall i delete his NDR parameter once  and add again?? this will be work or not ?? please confirm.
    Regards,
    Pabbati Obulesu

    Hi,
    NDR parameter value should be upper case X.
    Pls check your user parameter.
    Regards,
    Renuga.A

  • Print indicator assigned to the MM movement type 101 F ( GR for Production Order )

    Hello!
    I'd like to know how to assign a print indicator to the movement type GR for Production Order 101_F
    When I use the IMG path : Material management/ Inventory Management and Physical Inventory/ Print Control/ Maintain Print Indicator for Goods Receipt Document, I can only assign the movement type 101 (Goods receipt) but not the movement 101_F.
    Thank you for your help!
    Charlotte

    Hello Dev!
    The movement 101 F is Goods Receipt for Production Order. The letter "F" corresponds to the movement indicator.
    I'd like to dissociate the movements types 101 and 101_F to have only one printed label.
    Regards,
    Charlotte

  • Want to know the Mat docs for the stock in trans qty in MARD

    Hi Experts,
    I found 10 qty in stock in transfer(sloc) in MARD table for a material. I want to know what are all the material docuements posted against them descretely?
    Because:
    when I am doing the MB1B with movement type 313 for that material, the qty is appending on the existing qty, not knowing the details when and how much qty have been posted with in MARD.
    when I am using MSEG to fetch the Material documents posted with 313 movement type for that material. its showing so many material documents with 313 for that material docs for more qty.
    My questions is stock in transfer(sloc) qty should be equal to Mat docs with qty.
    Please help me to find the descretely.
    Thanks
    Srinvas

    Thanks for reply Kumar,
    Actually I have generated a report for pulling Mat docs which have been posted with 313 mov type by ignoring the corresponding docs with 314 and 315 using MARD and MSEG. I will use these Mat docs in further transaction like MBSU.
    Now my report is pulling all the mat docs with 313 for a particular material & plant combination when I am executing without any date range.
    But when I campare the Material in stock in trans (sloc) qty is 3 in MARD(for example), but my report is showing documents with more qty. (7 mat docs with total of 10 qty for ex.).  causing the data incosistency.
    Can you please help me in pulling the Material documents related to the stock in trans(sloc) qty only?
    Thanks
    srini

  • BDC for Goods Issue for movement 261 MIGO, Capturing Mat Doc No.

    Hi All
    I want to post Goods Mvmt for order fir mvmt 261 using BDC ( transaction MIGO ). However I need to get back the material Document no. which is generated after this posting and store it in Z table.
    Can I get that material in BDC recording or do I need to add a select statement for this. Material document no is displayed just on status line below. How to get that ?
    Amol

    capture the MESSAGE after the BDC , there u will get the MAT.DOC.
    <b>  call transaction 'MIGO' using bdctab
                                        mode 'E'
                                        update 'S'
                                      messages into msgtab .</b>
    Regards
    Prabhu

  • Add New Transaction code at OMBR - Version Print Indicator

    Hello
    I need to add one transaction in the Version Print Indicator List. I know it can be done.
    Can any one guide me  how to do, as "New entries" is grey there. ( To best of my knowledge it is done through some other route or means)
    Regards

    Hi,
    Use t.code SE16.
    Enter table name T158 and press F5.
    This will allow you to add new transactions to the table.
    Nir

Maybe you are looking for