Printing issue between macbook pro and windows 7 pc

I am trying to print from my macbook pro to an HP printer, scanner and copier all in one unit. It worked perfect with my old xp pc but with the windows 7 I can't get them to communicate with each other. I was told by geek squad at best buy that I probably need to get a different router. they suggesed airport. My would like to know which one I need. I want to print to the printer that is attached to my windows 7 machine from my macbook pro. I also have couple other xp machines that are used from time to time and I need to be able to print from them as well. any suggestions??? frustrated in Birmingham

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

Similar Messages

Network issue between Macbook Pro and Windows

I have a Macbook Pro 2012 model running 10.8.5. Also have a Win7 PC.
When both are connected to the home router via wire (or the Windows on wireless), everything is fine from network connectivity point of view. However if I move the Mac to Wireless (either 2.4 or 5GHz), Mac can't ping/reach out the Win7 computer and vice versa. Win7 can be wired or wireless, does not matter.
I checked not only ping, but http, https, vnc protocols. None of them works when Mac is on WiFi.
I also have printer, smartphones/tablets connected to the local lan and all are accessible either from the Mac or the Windows (including the home router and internet behind it).
First I thought it should be a Windows problem, so tried to shut the firewall down on that side, but did not behaved differently. Firewall is down on the Mac all the time. And firewall was somehow ticked out with the wired test when the Mac received pings from the Windows computer.
The other reason why I thought about Windows, when I boot it up, I can ping it for a couple of minutes. Then ping breaks.
Due to the 100% success of the cable test, now I started wondering if the Mac has some misconfiguration. Any suggestion I should check?

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

Wireless Router issues with MacBook Pro and Windows XP laptops

hello,
I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

File sharing permissions issue between Macbook Pro and iMac

Hi,
I'm having trouble sharing files to and from a Macbook Pro and iMac. Both are brand new, and connected via a firewire cable (Due to large file sizes)
I can share files between both computers no problem, but the files are set to 'Read only' by default once moved to the over device and can't be moved or renamed without requiring a password every single time.
Is there a way to totally share files without having to enter a password every time I want to move or rename it?
> File sharing is turned ON on both computers.
> Share files and folders using AFP is ticked
> Share files and folders using SMB is ticked also.
Thanks

Try disabling SMB File Sharing, & in the Sharing Pref Panes>Sharing>Options, see what users are listed.
Also, try logging into the other Mac with the Other Mac's username & PW, not using the name & PW of the one you're on.

Connectivity Issue Between MacBook Pro and Mac Mini

I have a MacBook Pro and a Mac Mini both with Yosemite 10.10.2, I've never had any issues with them sharing a connection when I was home, (I've never been able to connect outside of my home network) but I use the Mini to backup my MacBook Pro, but has of February 11th my MacBook Pro doesn't see my Mac Mini no matter what I do. I can share the screen from the Mini to the Book Pro but I can't remotely access the Mini from the MacBook Pro. I've turned off Back to My Mac on both Macs and removed it from my Airport Extreme and re-entered all of the information. I signed out of iCloud on both Macs and signed back in. I haven't changed any settings at all before I lost the connection, I am not sure how to resolve this issue.

Hey there GRivera210,
It sounds like you are having issues with using Back to my Mac. I would recommend using the troubleshooting outlined in the following article to help resolve the issue. It also has a contact for the iCloud support team if it doesnt resolve it:
If you have issues using Back to My Mac
Thank you for using Apple Support Communities.
Take care,
Sterling

HP Print Software for MacBook Pro and Windows 7 gone awry on HP OfficeJet Pro 8600

Almost one year ago today I wrote a post about my first problem with HP OfficeJet Pro 8600 N911. Today I write my last.
I have an HP OJP 8600, with option Tray 2 included, and auto feed included. My system test computers are:
1. Apple MacBook Pro, OS X 9.5, HP software is the only 3rd party software.
2. HP Laptop, Windows 7.
The OJP wireless radio gave up, so I cannot run it wirelessly. It is connected by ethernet to my router. All five of my computers can use. All of the functions of the printer are usable. For example: it prints, it scans, it copies, it faxes. All functions working. My problem is with the HP software download to the Apple and to the HP Laptop.
I would like to be able to use all of the feature settings when I print. But alas, I cannot. Both the Apple and the HP Laptop have a similar appearing window that opens when you choose to print something. In theory, you are supposed to be able to control a range of paper types and quality, print type and quality, and (in my case with the two trays) what tray to use to select the paper.
I regret neither of the computers perform these functions. And all of the mistakes that I find on the Apple computer I find on the HP Laptop Windows 7 computer.
I don't have the time to test every combination. But I think the table below will help you get an idea of what the problem is with the software that HP sends offshore for maintenance.
The results of the paper quality selection, the print quality selection, and the tray availability are as follows:
PAPER PRINT QUALITY TRAY AVAILABILITY
Plain Paper
Plain Paper DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
Thick Paper DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2
InkJet
Other DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
HP Bright DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Specialty
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Card   DRAFT gray/NORMAL/BEST/MAX DPI gray Auto/Tray 1/Tray 2 gray
Brochure
HP Brochure DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
Other DRAFT gray/NORMAL/BEST/MAX DPI gray   Auto/Tray 1/Tray 2 gray
In summary the new HP Print software for Apple and Windows 7 computers has identical programming mistakes on both operating systems. Under no circumstances can I use the MAX DPI setting.
The user cannot use the features that are built in to the HP software because the paper selections override the locked tray, the print quality, and the unusually small list of HP selection of papers.
It is time to invoke my warrenty rights. There are too many systemic problems with the software and the device. I don't have any more time to act as an unpaid system test analyst for HP.
Who do I contact to use my warrenty before it runs out in a few weeks?

Hi,
Those are not programming mistakes, but those are limitations of the product, please check the printer specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
As you may find under Paper-handling specifications > Paper tray capacities, Tray 2 only support Plain Paper.
Maximum DPI is only only supported on Photo Paper, therefore those limitations are applicable.. these limitations are also listed on the Printing Specifications section above, Maximum DPI is listed as 4800 by 1200 dpi:
Color print resolution: HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi)
As well that can be find listed within the Print photos on photo paper or the Print borderless documents sections, you may simply search for Maximum DPI within the user guide as a reference:
http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf
Those are not an issues with the printer but those expected limitations fully meet the product specification.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Set up home sharing between macbook pro and desktop pc. tried to sync music in library but ipod is not syncing the library. why not?

I set up homesharing between macbook pro and desktop pc. I have attempted to sync songs on my mac and pc, but the ipod will not sync the full library. why not?

Hey harold WD!
You will want to consolidate your entire library onto one computer using Home Sharing in order to sync all of these items onto your iPod. Use the following article to help you accomplish this:
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
http://support.apple.com/kb/PH12286
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I can't sync my all email message between macbook pro and iPad 4

Hi,
I can't sync my all email message between macbook pro and iPad 4. This sync only complete account setting but not email message.
Can anybody help me to fix the problem?

You can't "fix" this problem because you can't sync email messages from the Mac mail app, you can only sync your email account settings. Messages will not sync using iTunes.

Can i remotely share files between macbook pro and iMac

Want to know if I can do remote file sharing between macbook pro and imac.

Yes, absolutely. She can access her iMac from anywhere that has an Internet connection. If Screen Sharing is enabled, she can log in and use it as if she were seated at the iMac.
Provided the iMac's router supports the Bonjour Sleep Proxy (obviously all Apple AirPort Base Stations do), the iMac can even be asleep, and BTMM will wake it upon the router receiving a request to access the iMac.
The speed of her available Internet connection will be a limiting factor. Slower connections will be a bit laggy.
Her iMac will appear in a Finder Sidebar, under "Shared".

Unable to set up wireless network between macbook pro and Pixma MX860 printer/scanner

I am about ready to throw everything out the window. I have followed the advice given in an archived discussion on this forum, but I always get hung up just a few steps from the end when I don't get the window I'm supposed to get.
Supposedly, I'm to link the computer and printer initially with the USB cable, configure it, and then it's supposed to work WITHOUT the USB cable.
I've configured the printer in my MacBook Pro, but I'm supposed to "highlight the access point" (presumably my router) in the IJ printer window, and it isn't there.
I've tried running a LAN cable from my printer to my router. That doesn't work, either.
I'm running Snow Leopard (still a bit afraid of Lion).

I'm not familiar with your printer but from what you have said, can I ask the following questions:
Have you actually been able to print using a cable from from Mac Book Pro to your printer, or is this a new setup?
From my own experience with routers/computers/printers you normally have to pair the router to your printer/computer if connecting wirelessly, this involves pressing one or more buttons on the back of the router, then type in the very long security (WEP) keys printed on the bottom of the router.
Apologies if you're not presented with the same problems as I did, but at least it's a start!
Pairing of laptop computers and printers using wifi using the router is sometimes overlooked - look for the WEP keys/access codes and buttons on the back or underside of the router, write down the numbers and letters, and check out whether any buttons on the router need to be pressed!!!

Sharing folders between MacBook Pro and workgroup in windows 7

In September 2013 I was able to share folders between a MacBook Pro and 2 Windows 7 computers where all 3 computers belonged to the same workgroup.
Leelannee Cochran (at that time an Apple Level 3 support person) was satisfied with how I did it and I understood her to say that it would be "memorialized" by Apple.
I had a lightening incident where my cable modem was fried and had to be replaced. Now, I am not able to share the files in the MacBook Pro
Would someone tell me how to share files - unfortunately, I had not kept the notes

Thank you Team ZigZag
I have had 3 different vendors where I had to go to "higher" level support. The most recent occasion was with my router where I overheard the "supervisor" tell the 1st level tech support person "there is no way that the router will work with a workgroup.
I pleaded that it had done so before I had to replace my cable modem. Finally, I was able to share files between two windows 7 computers in the same workgroup and wrote to the manufacturer that I had done so, the reply was that they
are not responsible for 3rd party vendors!
As I mentioned, I was able to work my way to Leelannee Cochran who was a 3rd level support person at Apple, and she too was, initially, very skeptical and when I succeeded she offered to memorialize what I had done. I had to use my methods to
re-establish the MacBook on several occasions as a "sharing" member of the workgroup. I probably have lost my nerve and therefore am unable to recall exactly what I did
I found that a third vendor, despite the claim that their product would work with Mac OS the higher level support person was using me as a "resource" but my problem was that my computer kept crashing!
Trust me, frontline (1st Level) tech support are normally very competent but it is not easy to reach higher level tech support persons when their expertise runs out and are reluctant to call for higher level support!
I have had similar nightmares with support and that why I volunteer here and elsewhere. I wouldn't wish it on my worst enemies. I have found persistence is the key. I have, in the middle of a level 1 call where they said there was nothing
they could do and there was no supervisor aound, hung up and immediately redialed and wonder of wonder got the supervisor within 5 mins.
Good Sleuthing on your part
Wanikiya and Dyami--Team Zigzag

Home sharing problem between macbook pro and win7 pc

I tried to enable home sharing between my macbook pro and my windows 7 desktop to copy songs (mac --> pc and vice versa). I can share my mbp itunes library to my pc, but i can't do it the other way. i tried troubleshooting, from turning home sharing on and off on both computers, to restarting my router, but still to no avail. i want to copy songs from my pc to my mac this time as i've purchased some songs on the pc and want to sync them with my mac. please help me on this.

Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

Airdrop between Macbook Pro and iPhone 5 not working

Hi, I'm trying to use Airdrop between my Macbook Pro 17" (early 2009) running OS Yosemite, and my iPhone 5 running IOS 8.0.2, but it is not working.
All the specs on both of my laptop and iPhone seem to be ok, as Apple says in the System Requirements.
I've verified that Airdrop works fine betwen my Macbook Pro and other Mac laptops, but not with my iPhone.
I've all tried, but it's impossible, it doesn't work, and it should work.
I attach a screenshot showing the specs of my Macbook Pro, as well as the System Requirements.
Please,any solution?
Thank you.

From Mac Basics: AirDrop lets you send files from your Mac to ...
"In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model."

Printing issue between macbook pro and windows 7 pc

Similar Messages

Maybe you are looking for