Printing issues when printing day, week, and list views

I'm having problems all of a sudden with printing my iCal. Months print just fine, but when I try to print any other view, it says my paper size is incorrect, to choose another size. Well, I've been through and chosen every size listed, and it still says I have the incorrect paper size.
Anybody have any experience with this problem?

racjstevens,
Welcome to Apple Discussions.
Try changing your default paper size in System Preferences...>Print & Fax>Printing.
Is there any reason that you are still using 10.4.1? The current system is 10.4.10.
Also check this search for other suggestions.
;~)

Similar Messages

Check printing issue when vendor in Arabic and other in english are used

We are facing a scenario in which when we try to print two checks (one in arabic and the other in english) , the amount in words for english is creating alignment issue . Like 54647.08 in words would be fifty four thousand six hundred fourty seven and eight / hundred of the currency . But it is getting displayed as 'and eight / hundred of the currency fifty four thousand six hundred fourty seven .This issue is coming only when the english check comes after arabic one and not vice-versa and also when the amount in words is bigger (not in case of amounts like 70000 )

Hi
Try to use CALL FUNCTION 'SPELL_AMOUNT' Currecny Key = "USD" irrespective of the currency and then based on the country key or langauge Concatenate the Currency to the SPELL AMOUNT..
surya

Print issues when printing a muse page from internet explorer and opera

When I try to print a page on my muse site in internet explorer or opera it goes a little crazy. Everything is huge and thrown all over the place. When printing the same pages in firefox or safari it is fine. Any help?

I'm also running into this issue, and I'm hoping someone can answer.

Printing issues when printing to Server 2008 R2 Print Server

We have a problem with netwok printing that encompasses many different areas and versions of Windows OSes so I will be posting this in a few different places.
Let me lay this out for you. We have a single Server 2008 R2 print server with 300 printers of various models. This print server has both 32 and 64-bit drivers installed for every printer. For the HP printers we are using the HP Universal Printing PCL 6
(version 61.94.3.37) and for the Ricoh printers we are using their PCL6 driver for universal printing version 3.5. All drivers run in Isolation mode and no printer gets published to AD.
We have a mix of Windows clients printing to these printers, both XP Pro and Windows 7 32 and 64-bit.
Now for the problems: The other day one Isolation host on the server went crazy, processing was hitting 100% and memory was fluctuating and growing a lot. After investigating a little that isolation host was having issues accessing the Ricoh Driver (which
was 3.4 at the time). In an attempt to resolve the issue we updated the driver to V. 3.5. This seemed to fix the isolation issues and things calmed down however this is the beginning of many other issues for the clients. Both Windows OS versions (XP and 7)
don't seem to be either downloading and installing the updated driver and/or doing so correctly. Clients are now experiencing extremely slow printing, applications such as Word, Outlook, Excel and others open slowly and it can take 2-3 minutes for print dialog
boxes to open. In all cases it seems that we have to have a tech delete the printer(s), delete the driver and then re-install the printer to make things better but for some reason, which is really unknown, this process doesn't work for every machine and on
some we can't even remove the old drivers at all without booting into SafeMode and doing it that way.
With all of that said, are there any suggestions as to why the clients aren't downloading and installing the drivers from the server correctly? How to avoid these issues when we need to upgrade the drivers on the server in the future? Most importantly right
now, are there any recommendations or scripts on how to force the deletions of the printer, driver, reset the print spoolers and then re-add the printers in a more automated fashion?
I have played with both wmic, pnputil and printuidll and am trying to put something together but without a set solution that will work consistently it becomes a lot more difficult.

We are experiencing a very similar issue.
Windows Server 2008 R2. Printers are deployed over group policy.
Clients range from Windows 7 to Windows 8. Citrix XenDesktop and XenApp environment also connects to these endpoints.
We have A wide assortment of HP printers, and Ricoh Printers.
For the ricoh's we have been historically using the PCL6 drivers for the individual device type (not universal print). Up till recently, it all was working fine, until about some time in the middle of june, when everything just seemed to go crazy.
The issue was resolved by moving off from the PCL 6 drivers and using the PCL5e driver counterparts on all of our ricoh printers.
It would crash XenDesktop applications, it would crash office applications.
The print spooler would lock up, even if the ricoh printers were not actually used, just as long as they were loaded.
Even after loading PCL5 on the servers, some of the clients would simply not download the PCL5 version of the driver from the print server. In order to resolve this, I have created the steps below. Be advised, this may possibly cause damage on your system.
We just found it worked great for us. Local printers will likely have to be manually reinstalled after this.
Directions
Stop the print spooler
Open C:\Windows\System32\Spool and delete the following
All files in SERVERS
All files in PRINTERS
All files in drivers
All files in prtprocs
Start the print spooler
Open a command prompt as administrator, and run the following command
Cscript C:\windows\system32\Printing_Admin_Scripts\en-US\prndrvr.vbs -x
This should further delete all print drivers.
Open a command prompt as a standard user (not administrator) and run the following
Gpupdate
Now wait. It takes a while, but the printers will slowly start to repopulate.
I am still not sure what is going on with the PCL6 drivers for ricoh, and why this issue is happening. I'm guessing it has something to do with the Ricoh auto update that is included in their pcl6 drivers. Maybe some sort of auto update happened recently.

Print issue when print a mail

hello, I have some problem when print from mail.app
for some mail if I print in vertical mode appear white space between header and body of the message but does not appear in the vertical (really this white space not exist!))
the problem occurs randomly and does not depend on the printer connected
thanks
claudio

yes I checked, this problem occur on random mail on several computer (with different printer ) with mavericks
Does not depend from computer or mail account...

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Color issues when printing AI files on PostScript

First off, please forgive me if this is not the right forum or if I am not using the right terms. I am the network admin for our company and I'm posting this on behalf of our designer.
We recently added PostScript drivers to our Sharp printers, and we have been seeing odd printing results when printing embedded .AI files.
We use CreativeSuite CS5, and our developer has hundreds of images with pure white and transparent backgrounds stored in .AI format. When these images are embedded/linked to an Indesign document they print with a solid black background and what appears to be an inverted color pattern, almost like a photo negative.
All embedded EPS files print fine. The affected .AI files print fine when printed directly from Illustrator.
The embedded images print fine using a PCL driver. We are trying to implement the Postscript driver for better color quality.
Any ideas?
(We are using Windows XP SP3, x86
Server based network printing on Windows 2003 x86)
Thanks in advance
Matt

You'll get better and faster responses if you post in the Adobe Illustrator forum. This is an application-specific question rather than a color management issue.
http://forums.adobe.com/community/illustrator/illustrator_general?view=discussions&start=0

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

When setting the split-days to "every 15 minutes," the week and comparison views show incorrect time ranges for the day

When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.
<P>
For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.
<P>
In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.
<P>
Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.

Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up.

I am still having issues when visiting a website and then selecting the back icon and going to days old data instead of current. How do I fix this?

I am still having issues when visiting a website and then selecting the back icon and browsers is returning old data instead of current. How do I fix this?

found a solution thank you firefox live chat!!!

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

View Outlook Calendar on iPhone In Day, Week, Or Month Views--NOT As A List

I apologize in advance if this has been asked already but couldn't find the answer after an extensive search.
My question is, after syncing my Outlook calendar to the iPhone, how can I view my appointments other than as a list in the iPhone? I would like to view my appointments in either day, week, or month views as opposed to only knowing what my next two or three appointments are. To me it just seems like a simple setting I'm overlooking somewhere. I appreciate any help you can afford
Thanks in advance,
-V5

*iPhone calendar views are a joke!*
My 90's Palm Vx had far more usable views via Pimlico Software. The gray scale display with poor resolution was able to show one or even two weeks with appointment texts.
What does iPhone have? List view is the best there is. One sees all appointments with only just scrolling. Day view is terrible. The whole day should be visible without scrolling for it to be at least somewhat efficient. Now one has to first select a day with arrows and after that scroll thru the day and after that select another day and scroll again. No way. Month view is very poorly designed! The grid takes way too much space and who decided to put the appointment list in the bottom of the screen when one's index finger blocks it if sliding thru days in the grid!!! Oh man!!! Unlock the landscape view and please make the grid a little bit smaller and please place the appointment list on the left or at least on the right side. And make its font way smaller! No point in seeing two appoinments without scrolling.
iPhone's wonderful screen would be able to show one or two weeks with written appointments in a list like manner especially landscape. I mean seven columns titled Mo-Su and all appointments listed in that day's column.
Hopefully SDK will let someone else do it if Apple won't.
And we have to get to copy appointments and paste them to other days also. I am spending 30 min writing the same info one at a time to our monthly plan. Everyone else is already having a cup of coffee.

Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing a PDF

Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing on a domain, this only happens when I print a PDF.
I then have to restart the print spooler to get my printouts sent to the printer. I am using a Windows 7 32 & 64 bit environment on a domain. Users who aren't on the domain experience no issues and their printer drivers remain online and not grayed out.
When I print a PDF using Foxit Reader or Nitro PDF then all works fine, the moment I open a PDF using Adobe Reader X or XI then the shared network printer driver bombs out and I am back restarting the print spooler. If we roll back to Adobe 9 then we dont have any issues.
When you create a local printer driver all works fine, the problem is we don't encourage local printer drivers due to security.
We use Ricoh printer drivers, the MPC5501 PCL5C, driver version 1.2.0.0 with PDK version 12.65. We have also tried the PCL6 printer driver and Universal printer driver. All give the same result. The printer uses Winiprint Print processor using RAW as the default data type.
We have contacted Adobe Global Support who advised that they cannot assist with this query as this is on a Domain environment and we have to contact our IT Department.
We would really appreciate some professional help here to get a fix for this issue in order to address potential future occurance's

Try to turn off any video acceleration on your graphic driver for your graphics card.

Any way to get more than 100% zoom on print jobs when printing multiple pages?

I know how to increase the size of a print job, when I am printing one page at a time. But when I go to print 2 pages at once (the multiple page print function), there are always large margins around the page. I'm ok with saving paper and printing up two pages, but it seems silly to see small print and wide blank margins. Is there any way to increase the print zoom, when printing multiple pages per sheet of paper?

I once overshot the limit by marking too many photos to fit within 99 pages, but I could never figure out how to fool the application and had to give up trying to add those 14 extra photos.
I asked a friend (who practically lives in Terminal) if he had any way of modifying that limit, but he reminded me that if their printing services are set up to bind books and bill for only 99 pages, fooling the application might be useless if the service only prints me a 99 page book and discards the additional pages.
I can understand that you wouldn't want to let people print 1000 page books, but I sent feedback anyway to allow me to increase the limit. Anyone know of any service that lets you print beyond iPhoto's limits?

How can i choose a lower quality print density when printing from firefox on my Mac. I cant move the slider along the scale ( I can when printing from the computer).

I can't change the print density when printing from Firefox. It is set at standard and although there is a "slider button" to use for choosing less or more density, it can't be moved. I can tick "grayscale". I can choose the density when printing from the computer. I have a Mac

I also have this problem where I used to be able to shrink a 2 page doc to a single page. Since upgrade to FF4 it no longer works - but you can choose say 60% and it will work. All used to work fine in FF3

Printing issues when printing day, week, and list views

Similar Messages

Maybe you are looking for