Printing issues with first page, only prints part of page

I dont know if this is the right place to ask, but I figured i would give it a shot:
I have a computer running parallels with an OSX supported (and windows supported) HP printer. When I am printing an email from Outlook Express, the first page gets cutoff, but all of the other pages are fine. the cutoff happens on the right hand side.
I recently updated to SP3 and IE8, which I have heard controls the settings for Outlook.
I have tried using a regular printer, and also tried CUTE PDF writer, which also "prints" the document in the same manner.
Any thoughts would be appreciated or if you know where to go for support that would be great too
Thanks!

See if the solutions given in this article help: [http://kb.mozillazine.org/Problems_printing_web_pages#Does_not_print_entire_page_content Problems printing web pages]
<BR><BR>For general information related to printing, see this article: [[Printing a web page]].

Similar Messages

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Print issue with Adobe PDF reader print in IE9

We are unable to print Brava PDF documents with Adobe PDF reader activeX enabled in IE9. The same runs fine in Chrome with Adobe PDF reader activeX enabled.
I noticed Chrome uses
C:\Program Files\Adobe\Reader 10.0\Reader\AIR\nppdf32.dll, whereas IE9 uses-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll.
Has anyone faced this issue?

Can you print other pdf files from within IE9? Can you download the files and print them directly from Reader on you computer? Please list the steps you are using to print the pdf from IE9.

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Figured it out. It had nothing to do with the software levels of Safari or Adobe Acrobat. Here's the fix:
Open Finder/Applications
Search "Internet Plug-Ins"
Move any Adobe plug-ins to the trash
Quit Safari
Launch Safari
Your pdf document should now render in Print Preview and print properly.

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Printing issue in smartforms (Bullets are printed as #)

Hi Guys,
I've an issue in printing one of the forms. I'm using bullets in the form and when I see the print preview, i can see the bullets.
But when I print the document, instead of bullets, I see '#'. Is it something to do with the printer drivers or anything I can do and prevent it.
Thanks in advance.

Hi,
Infact it is a printer issue.
Please contact the printer incharge to configure the printer so as to print the bullets properly.
Regards,
Ram

When I print on photo paper it only prints in black and white. How can I fix this?

When I print on photo paper it only prints in black and white. How can I fix this?

Does it print correctly on plain paper?
What do you do differently to print on Photo Paper than to print on plain paper?
iPhoto has no idea of what paper is being printed - that is totally a function of the printer and the print driver supplied with the printer - you need to look at the printer specific options and your printer manual and/or support forums
LN

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Adobe Reader prints PDFs with magenta hue when printing is set to B&W

Adobe Reader prints PDFs with magenta hue when printing is set to B&W

BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

Reader Adobe Reader prints PDFs with magenta hue when printing is set to B&W

Adobe Reader prints PDFs with magenta hue when printing is set to B&W

BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Is the Wi-Fi button greyed out? Try this article: http://support.apple.com/kb/TS1559
Also, make a backup to iTunes of the device. Then restore it as a new device. If you still have wi-fi greyed out, then contact Apple again, and explain that you believe you have a hardware issue. They may still ask for a $19 deposit, but if it is actually hardware related, then you won't be charged the $19. Only if it is software related do you get charged that $19.

Printing issues with first page, only prints part of page

Similar Messages

Maybe you are looking for