Printing new header pages for each break value

Is there some way to print a separate header page whenever a particular field value changes in a repeating frame? The header section will only print at the begining of the whole report, rather than at the begining of the section and I can't figure out a way of causing a page break within the repeating frame.
Thanks for your help.

hello,
did you try a combination of the properties MAXIMUM NUMBER OF RECORDS PER PAGE, PAGEPREAK BEFORE, PAGEBREAK AFTER. you might need to re-arrange your fields and create additionla group frames.
you could also try to solve this problem using a fixed sized group-frame that fills up the first page physically, forcing the remaining elements to shift to the following pages.
regards,
the oracle reports team --pw

Similar Messages

Must I print out a new Alignment Page with each new cartridge?

Do I need to print out a new Alignment Page with each new cartridge I install on my HP Photosmart C4480? Or can I save and reuse the initial one I got when first installing my printer cartridges? The Alignment pages all seem to be identical when I print them out with each new cartridge I install, but I'm not examining them with a microscope.
If I can save and reuse the Alignment page with sucessive cartridge replacements, when I am following the procedure for installing a new cartridge and the printer prompts me to print out a new Alignment page, is there an option to skip that step? I don't recall seeing that option on the control panel window on the printer.
Thank you!
This question was solved.
View Solution.

themadtoker wrote:
do NOT listen to this expert.
YOU DO NOT NEED A NEW ALIGNMENT PAGE EVERY TIME YOU INSTALL A NEW CARTRIDGE
I registered just to respond to this
The alignment pages all look the same because they are all the same, pretty sure its a scam to let you use ink. [snip]
I am pretty sure you do not understand what the alignment page is for - it provides information for alignment of black vs. color and also is used to calibrate the operating energy for the color cartridge.
You may be able to "fool" the printer by reusing an old alignment page, but the quality will suffer as you will not be running at the optimum energy.
You are certainly free to do what you want with your printer but please do not mislead others with misinformation.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Within the budget template; how would one create an entire year worth of a budget; with out having to create a separate page for each month?

Help!
Loving the budget template, but I would like to be able to create an entire years worth of a buget with out creating a whole new transaction/budget page for each month. How do I get the new transaction to identify a new budget chart?
Thanks, Emily

Emily,
No need to think the budget template is only for one month. Just keep typing the date in the date column of the "Transactions" sheet and the details will update. You should adjust the budget categories to match the duration of time you want to use.
If you do want month-by-month, then you can switch to the "Transactions" sheet, select the table, cut
then switch back to the "Budget" sheet, paste.
Now rename the "Budget" sheet something like "Budget Jan 2014", and delete the "Transactions" sheet. Set the budget for Jan in the column I highlighted above. The subsequent months, duplicate the monthly budget:
Then adjust the the entries in the transactions table inside this sheet.

It is necessary to create one header data for each file to be sent to CDFS.

hi GUYS
my sce anrio is FILE-XI-PROXY
REQUIREMENT IS
SOURCE FILE                      TARGET FILE WILL BE
H1                                             H1                        H1                    H1
I1                                               I1                         I2                      I3
I2                                                F1                        F1                    F1
I3
F1
It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
Thanks
NAG

aa

Creating a new Master Page for new SharePoint 365 Environment

Hello,
If you create a new Master Page for your 365 site collection should all the Promoted Links, List Headings, etc. (standard items that are in the OOO SP Master Page) still remain the 'Blue SP Color' or are you able to change these items in the Master
Page as well? If someone needs additional information on my question please let me know.
Thank you in advance!
Joanie

Hi Joanie,
use those article to build your master page for office 365
http://rstagg.com/2013/04/17/office-365-branding-creating-a-custom-masterpage-for-your-office-365-public-facing-website/
http://msdn.microsoft.com/en-us/library/jj822370.aspx
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Need new result file for each iteration of a loop

I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!

Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc

New Header Text for PR

Dear colleagues,
I have created a new header text for PR under object EBANH (as Z01) from transaction code SE75. This new header text appears when creating/changing PR but when I fill this new header text right behind saving of PR filled data disappears from this new header text of PR.
Can you please advice how to solve this issue?
Thanks.

Hi Nick,
EBANH is active if it wouldn't have than I couldn't maintain the original text area (B01) supplied by SAP. But I can simply maintain and save original header note of PR.
Thanks.
PS. Where can I see if EBANH is active or not?

Print a TO label for each item

Hi Gurus,
I wanna print a TO label for each item ,
i have a TO with two items, and i go to OMLV ,set 3 (No.of labels = 1.(for each TO item,qty in alt un.of meas )) in field 'quantity of labels(indicator)', i was expecting that two labels will be printed out, but actually, just one label was printed out?
i wanna know why my setting didn't take effect?
BR,
Dragsky

Can you check if appropriate print code assigned to the movement type thru which you are creating the TO.

Can Firefox 6 be configured to remember more than 5 prior pages for each tab so that the "go back one page" feature will allow me to retrace my steps as many as 20 pages back?

Before Firefox 5, the "go back one page" history would show 10 or more prior pages for each tab, so that I could go back quite a way in retracing my browsing steps. With Firefox 5.0.1 and 6, however, the list of prior pages seems to have been capped at 5. I would like to configure Firefox to remember 20 or 25 prior pages for each tab. Is there any way to do that?

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Creating a dynamic page for each record.

So I understand how to grab a single row from a database for use on a dynamic page. Now creating 1,000 pages for each row would be rather tedious even with copy and paste. So can anyone provide me some information on how to do this without creating each page manually?

>See what im saying?
No.
>What you are suggesting wouldn't actually produce a page for that product which can be linked to from other areas of the site.
Yes it would. You create a link to a dynamic page and pass it the id of the item you want to display. So instead of using a link to a static page like this:
<a href="mywidget_01.html">My Widget 101</a>
You would link to a dynamic page like this:
<a href="widgets.php?id=101">My Widget 101</a>
The widgets.php would read the query string and pull the correct data for widget 101 from the database. You could even use url rewriting so the url of the dynamic page for widget 101 would be http://example.com/widget101
>What I need is an easier way to produce 40,000 static pages.
That's crazy. It defeats the whole purpose of dynamic sites. Before you start on this, make sure you fully understand your options.

I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?

I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?

NeuroBrain wrote:
Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
This is a common mistake and I highly advise against it.
1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
Seriously, have a read,
Most commonly used backup methods
it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
"Plan for the worst and the good will take care of itself" - Donald Trump

To view reports in new page for each cutomer using Report Designer

HI all
I have a requirement to view the data (key figures) for each customer in a new page.
I have created the same using the Report Designer tool.
Now there is setting for this Group Header 'Customer' i have selected the option 'repeat group header on each page'
still the query when generated, gives fine results for certain cases but not for all.
like it will show the each customers in a fresh page for some pages , then in midst there would some 2-3 customers in the same page.
There is no relation between these customers , they are same as the other customers, no difference at all.then i am not able to figure out the reason why it is behaving so odd.
Thanks
Ramesh

Ramesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel

How to print the out put for each customer in table

Dear SDN Team Members!
I've created a report and the output is displayed on the smartform for the same.
In this report, I've selected a list of customers and the report has to print the list of transactions being made by each customer in Smartform.
These details must be printed seperately for each customer.
I'm thinking of control statement AT NEW & AT END. But i don't know how to use them exactly so that the output is displayed seperately for each customer in the Smartform.
Please provide syntax and points will be awarded for.
Best Regards!

Hi Krsihna,
Its simple.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = '<form name>'
importing FM_NAME = lv_func_name.
loop at itab.
at new customer. "customer must be the fisrt field in the itab and itab mus be sorted by customer.
call function lv_func_name
endat.
endloop.
Regards,
Ravi

Servlet to generate *new* html pages for browser

Dear all,
Greetings!
I am write a servlet, and I want this servlet to generate different html pages (say 5 pages) simultaneously, and then display them in 5 different pages in client browser.
The sequence is like this:
1) the user click a link in a web browser and send request to web server.
2) web server has a servlet to handle this request, then in doGet() or doPost() method it will do some calculations first, after that, it generate 5 different html pages (it can use redirect in a chain fashion) and send back to client browser.
3) the client browser will display these 5 different html code in 5 different pages (should not be the same as the original pages that submited the request), i.e, it will pop up new web pages automatically to serve 5 different pages (since each page will have <html> ... </html> codes).
Any solution, if possible, please give me some idea.
//-- My main problem is: how to ask servlet to generate html codes,
//-- and when send back to client, let browser displays the information in
//-- a new web page (not original page the submit the request)? show some servlet doGet() code if possible.
if you have solution for even only 1 page, your help is also very appreciated!
once again, many thanks!

However, for wild guessing,
are you included d:\richard in your CLASSPATH?No. Does the CLASSPATH affect the default directory to create file - and I have to put the Tomcat as the first path in my classPath? But I just found that I set environment variable HOME to be d:\richard. It must be the reason.
How about this:
When a use submit a request, the servlet starts a new
thread to do the process, for example.....I thought about this solution earlier. It is true that this is a solution. Now I am not worrying about it, since when I move on about this project, I found something more interesting (worse?) for this project. Detail follows:
This morning I was informed that the project needs the request being sent from the front end applet, (*NOT from browser link*), so now even simple client side scripting does not work. This is because when servlet sends back response, it will send back to applet by Connection.getInputStream() - this is what I can think about right now. Basically, it means, the browser will not even have a chance to process the returned HTML code. So the question becomes: How to ask browser open a web page to display the servlet response from an front end applet directly? ;(
I am almost run out of idea! Will check back later, meanwhile spend some more time considering... It is very late here now (early in the next morning)!
Thank you very much indeed for all you kind help!!!

Default "First" Page for each Folder

Following on from Rick's note if I may...
Similar question: My file contains numerous folders, the
inital one of each has a page with a "departmental - overview".
What I have for each Folder - eg. Finance - is a page
containing this "overview" - like a "title" page, below this are
the sub-folders for each aspect of that Dept. eg Job Descriptions,
Processes ....
So - when you create the TOC, is there a way that you can get
the "overview" listed first, and under that, the sub-folders,
rather than this overview being detailed below the folders....
Does this make sense???
Al

By folder, it sounds like you mean Book in the TOC. Right
click the book and link it to any topic.
If you also created a printed output, by default you will get
the topic twice, once with the book and once in its own right.

Printing new header pages for each break value

Similar Messages

Maybe you are looking for