Printing the dashbord using Print Button

Hi all
I have a Print button (supplied in Xcelsius) to print the dashboard current page. When I print the dashboard, I see there is two scoll bars at edge of the page. one down and the other right side. It means the page is bigger than it would be. However I don't have this issue on the screen, and also for another printer, it looks perfectly fit. As we can not control on the printers which clients use to print the dashboard, I need to know what I can do on my side to prevent having scroll bars on the printed page.
Thanks in advance.

There problem in fact was in printer's seting up. The printer was working but the correct driver has not been run for its set up. After installing it again using the proper driver, the issues in the printing resolved.
Thanks for your contributions.

Similar Messages

How to disable the inputfield using radio button dynamically in module pool

How to disable the inputfield on the screen using radio button dynamically in module pool.
Please suggest .
        Thanks.
Edited by: Lavanya YH1504 on Jul 30, 2010 1:20 PM

I got it thank you.
LOOP AT SCREEN.
    if screen-GROUP1 = 'LA1'.
       If RADIO1 = 'X'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
     ELSEIF RADIO2 = 'X'.
       screen-input = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.                 " STATUS_0100 OUTPUT
Edited by: Lavanya YH1504 on Jul 30, 2010 1:51 PM

How do I remove a child from the stage using a button click?

I have a movieclip that requires Play, Pause, Forward and Back buttons. The movieclip has actionscript at various frames to load movieclips from the library and repeat them.
I have tried using a timeline scrubber but it does not trigger the actionscript when scrubbing, only when the movie plays normally.
My possible solution is to create Fwd and Back buttons that can go to specific frames where key animations will begin.
I need to develop actionscript that will remove Children when the user clicks Back.
This is how I am loading several movieclips along the timeline from my library:
var shpA1:arSHPp1;
function attachAR1 () {
shpA1 = new arSHPp1 ();
shpA1.x = -30;
shpA1.y = 18;
addChild (shpA1);
//the interval is used to repeat the animation to represent continuous flow on a diagram
var myInterval1:uint = setInterval (attachAR1, 500);
This what I have tried so far (not working at all - no errors or trace):
function remChild1(event:MouseEvent) :void {
    if(shpA1.stage)
        trace("arSHPp1 is in display list");
        shpA1.parent.removeChild(shpA1);
        shpA1 = null
    else
        trace("arSHPp1 isn't in display list");

I did try that but it would not remove the child.
i appreciate your help though.
I am also trying to determine if a child is on the stage and if it is, remove it. I have created a button that will jump back on the timeline and the mc's that were loaded after this point in time.
This looks like it should work. It doesn't give me any errors but the mc remains on the stage.
var remMC;
if (getChildByName("mc2") != null) {
removeChild(mc2);

How can we close the window using a button in applet?

I have a close button in my applet which should close the browser from where the application is launched. Can somebody post a sample code for doing the same?

I'm afraid I don't have any sample code, but I can describe a possible solution.
1. Retrieve the JSObject via Application.[url http://docs.oracle.com/javafx/2/api/javafx/application/Application.html#getHostServices%28%29]getHostServices().[url http://docs.oracle.com/javafx/2/api/javafx/application/HostServices.html#getWebContext%28%29]getWebContext()
2. Use the JSObject to manipulate the JavaScript into closing the Window.

Using the print button to print then close a document

I use Live Cycle Designer to create my Adobe documents. I am working on a kiosk project and one of the menus navigates to a document page that has PDF documents and forms for users to print out. The way the kiosk is designed, I would like for my pdf file to close after the print button is selected. I recieved a solution in the general Adobe forum, but later found out the script does not work if the document was made using Live Cycle. Any suggestions??? Is it possible??? Thanks.

Open your PDF file in adobe livecycle designer, select print button on PDF.
Go to windows(in adobe designer menu bar) and select Script Editor - In Show dropdown list select postPrint event and copy paste the code below-
app.execMenuItem("Close");
Regards-
Chalukya.

How to send the ALV GRID output to spool by using the print button in std t

How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.Ramana

Hi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
    WHEN 'EXCEL'.
      PERFORM excel_download.
    WHEN 'PRI'.
      PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
           EXPORTING
                columns        = 80
                device         = 'ANY '
                lines          = 65
                maxpenality    = 1999
           TABLES
                layouts        = lt_layouts1
           EXCEPTIONS
                unknown_device = 1
                OTHERS         = 2.
      IF sy-subrc = 0.
        LOOP AT lt_layouts1.
          IF lt_layouts1-penality < 1000        AND
             lt_layouts1-penality < l_min_penality.
            l_layout       = lt_layouts1-layout.
            l_min_penality = lt_layouts1-penality.
          ENDIF.
        ENDLOOP.
        IF NOT l_layout IS INITIAL.
          CALL FUNCTION 'GET_PRINT_PARAMETERS'
               EXPORTING
                    mode                   = 'CURRENT'
                    line_size              = 80             "#EC *
            new_list_id            = l_new_list_id
                    no_dialog              = l_no_dialog
                    layout                 = l_layout
               IMPORTING
                    out_archive_parameters = rs_arc_params
                    out_parameters         = rs_pri_params
                    valid                  = l_valid
               EXCEPTIONS
                    archive_info_not_found = 1
                    invalid_print_params   = 2
                    invalid_archive_params = 3
                    OTHERS                 = 4.
          IF sy-subrc NE 0.                                 " INS SLIN
          ENDIF.                                            " INS SLIN
          IF rs_pri_params-linsz LT 80 OR
             rs_pri_params-linsz LT gt_stack-s_lprint-width.
            gt_stack-print_line_break = 'X'.
          ELSE.
            CLEAR gt_stack-print_line_break.
          ENDIF.
          IF l_valid NE 'X'.
            rs_pri_params = ls_pri_params_sav.
            rs_arc_params = ls_arc_params_sav.
          ENDIF.
        ENDIF.
      ENDIF.
endform.                    " Print_output
    CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
            EXPORTING
               is_layout         = gs_layout_cost_tot_grand
            CHANGING
               it_fieldcatalog   = gt_fcat_cost_tot_grand[]
               it_outtab         = gt_cost_tot_grand[].
Please check my code

I cannot print from a website using the "print" button nor going to "file" "print preview" (nothing there to preview) then "'print" - nothing prints.

I cannot print from any wetsite as there is no print button. I have tried using the printer icon, also file, print preview then print. Nothing to preview nothing printed. How do I print from a website?????

If this is similar to problems I sometimes have printing -- 1) Only happens on some, not all, websites 2) Printer preview window comes up OK, just shows a blank page -- I can suggest a work around, if not a solution: try turning your page into a PDF. Either install an extension which gives a "Save as...PDF" menu option, or a PDF printer driver (I use bullzip). The problem seems to be with the manner the websites use frames and/or javascript. This work around also handles websites that can't get along with your printer settings and chop off edges.

Can we add custom print button to crystal report launched using jsp

Hi,
I need to add a print icon in crystal report. My requirement states that I should not use the print button given in the taskbar of crystal report. Can this be done?
Thanks

Are you using Crystal Reports for Eclipse? If so, there is a new version out that suports Excel exporting:
/people/blair.wheadon/blog/2009/01/16/announcing-crystal-reports-for-eclipse-20

How Can I Create a Print Button on a PDF Using Acrobat Pro That Will Also Work on iOS?

I created a Print Button on a PDF document using Adobe Acrobat Pro on my Mac. The Print button works perfectly on different browsers on my Mac and on Windows (running under Parallels Desktop) as well.
When I open the document on my iPad the Print button doesn't even appear. I am guessing that this is a Flash issue but it may be more related to the fact the the action for the button is to access the Print menu item, which doesn't exist under iOS.
Is there any way to create a Print button using Acrobat Pro that will work on a Mac and Windows but also on iOS?

In order to initiate printing by clicking a button, the button has to have either an "execute menu item" type action or use the "print" JavaScript method. As you guessed, the former won't work since there are no menu items to execute, and the latter can only work if the particular PDF viewer you're using supports it. I'm not aware of any that do on iOS.
The button doesn't appear because you're probably opening it in the default PDF viewer, which doesn't support forms at all. If you were to open the form in Adobe Reader, you'd see the button but it wouldn't work.

Can't reach the print button on the bottom of the page

When the page preview page appears, I can't reach the print button at the bottom of the page.

To use AirPlay, you will need the following:
iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
Apple TV (2nd or 3rd generation)
AirPort Express
Wi-Fi (802.11a/g/n) network

10g Forms closing when print button on smartbar used.

I have an application run on Application Server 10g (9.0.4). The client machine is Windows 98 runing IE 5.5. Everytime the print button in the smartbar is click and the printer dialog is display, then the ok button is click the oracle form application is closed.

Sorry for hijacking this thread, but I'm facing a similar problem.The time you used for writing this sentence would have been just the time you'd need to open a new thread ;-)
How do I specify that whenever a window in the form is closedIn the trigger at form-level you can check the content of :SYSTEM.EVENT_WINDOW, this contains the name of the window.

I cannot find a print button on the toolbar and therefore cannot print sometimes from the web

When I use internet explorer there is a "print" button on the tool bar, but there is not on Mozilla and cannot find anywhere to add it to the toolbar.

hi, how are you?
To show the print button in the tool bar, do this.
go to View option, then toolbars, and then customise, and a popup window will appear, in that window look for a print button, (i think that is the last of the first row) click on it, and drag it to the toolbar
Byee

While Printing using Print Button on Crysal Report Loses focus.

Hi all,
I am using CR XI along with VS2003 for developing my application.
My application uses a Treeview to list all the available reports, once user select one of the report. I am using another dll, which contain all the rpt files as Embedded Resource, for showing the report in Crystal report viewer.
Once report get loaded, I am using Print Button from Crystal report viewer to print the report.
report get printed properly..
However a strange behavior occurring, Form with Crystal report viewer control placed loses focus and immediate below window coming into focus (some other opened window get activated and bring to front and hiding my application).
Any suggestion would be appreciated.
Thank you
Riju K K

Hi Brian,
Thanks for you are reply.
I think I am not creating a separate process,
From my application, I am creating an instance of form (which is in another DLL) which is hosting Crystal report viewer.
If click "Print" button on the Crystal report viewer, I am getting a Printer selection form.
If I cancel from there ,my Crystal report viewer form get focus back.
If select a printer and click "OK". my Crystal report viewer form lost focus and some of the other window opened (word, ie, etc) before get focus.
My assumption is Crystal Report viewer's "Print" button may be using a separate thread for Printing.
that may creating this focus issue.
what you think?

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Report is not starting an adobe window when pressing the print button

When ever I press the print button on my report and I get the box that asks you which page to print. I choose all and then press the ok button. Nothing happens when I press the ok button. I'm I missing something on the server that is running the application. It works locally but not on my test server.
Thank you

Well, in order to print using PDF, you must have adobe installed...
I understand that you have some CR Service Pack installed, but I am not sure which one. I'd recommend you download SP 5 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
And use the msm to install the runtime. The SP 5 msm is here;
https://smpdl.sap-ag.de/~sapidp/012002523100001088442009E/crxir2sp5_net_mm.zip
Re.; I was wondering I am missing something from the server that converts the report to pdf and shows it in the adobe viewer.
Not that I am aware of.
If SP 5 does not help, a question for you; can you print any pdf document (non CR) from adobe on that server?
Ludek

Printing the dashbord using Print Button

Similar Messages

Maybe you are looking for