Printing using SUBMIT statement

Hi
I have a problem in printing using SUBMIT.
I have three printers identified to print certain orders using submit statement.
the list of printers is given in a drop down and once the user selects a printer from the list, i have to generate a spool for the corresponding printer. But this is not happening. The spool is generated for the user's default printer defined in SU50. I have my submit statement below:
SUBMIT zppprbsel WITH aufnr EQ p_wa_batch_res_process_order
                    WITH werks EQ c_1201 "'1201'
                    WITH relvn EQ c_0 "'00000000'
                    WITH relbs EQ c_0 "'00000000'
                    WITH orig EQ ' '
                    WITH nach EQ c_x "'X'
                    TO SAP-SPOOL
*SPOOL PARAMETERS l_dest
                    WITHOUT SPOOL DYNPRO
                    WITH DESTINATION = l_dest
                    WITH IMMEDIATELY = SPACE
                    WITH KEEP_IN_SPOOL = 'X'
                    VIA JOB v_job_name
                    NUMBER   v_job_cnt
                    AND RETURN.
here my l_dest has one of the three printers that the user selects.
when i change my default printer to one of the three printers the spool is generated fine. A spool always generated for the default printer of the user?

Hi,
Before the SUBMIT get the PRINT PARAMETER by using the FM --> GET_PRINT_PARAMETERS
IMPORTING
out_parameters = print_parameters
print_parameters-pdest = 'LOCL'. " Change the Destination before passsing the PRINT_PARAMETER to SUBMIT.
Then pass the print_parameters from the FM to the SUBMIT
SUBMIT zppprbsel WITH aufnr EQ p_wa_batch_res_process_order
WITH werks EQ c_1201 "'1201'
WITH relvn EQ c_0 "'00000000'
WITH relbs EQ c_0 "'00000000'
WITH orig EQ ' '
WITH nach EQ c_x "'X'
TO SAP-SPOOL
SPOOL PARAMETERS print_parameters "Pass here
WITHOUT SPOOL DYNPRO
WITH DESTINATION = l_dest
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X'
VIA JOB v_job_name
NUMBER v_job_cnt
AND RETURN.
Regards,
Madhukar Shetty

Similar Messages

Create spool for background jobs which uses submit statement

Hi Gurus,
 I have a quick question regarding the backgroud jobs. When we run a program in the background , it should create a spool for us, but, the problem comes when I am running a program in the background, its not creating the spool. This program uses SUBMIT statement. This program collects the data and it will submit to the other program and then retuen. In this case, its not creating a spool. Its very important for us to look at the spool for this program. Does anybody cam across this kind of problem? I need ur inputs.
Thanks in advance, <REMOVED BY MODERATOR>
Regards,
Srinivas.
Edited by: Alvaro Tejada Galindo on Mar 18, 2008 4:31 PM

hi check this link ...
Scheduling a submitable program as a background task with the number number in a background request name. After scheduling, the background task is completed by function module JOB_CLOSE and released immediately.
DATA: number TYPE tbtcjob-jobcount,
 name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
 print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
 jobname = name
IMPORTING
 jobcount = number
EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
 SPOOL PARAMETERS print_parameters
 WITHOUT SPOOL DYNPRO
 VIA JOB name NUMBER number
 AND RETURN.
IF sy-subrc = 0.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = number
 jobname = name
 strtimmed = 'X'
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDIF.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=backgroundsubmit&adv=false&sortby=cm_rnd_rankvalue
sy-subrc Meaning
0 Background task scheduled successfully.
4 Scheduling cancelled by user on the selection screen.
8 Error during scheduling, i.e. when accessing JOB_SUBMIT internally.
12 Error in internal number assignment.
regards,
venkat.
Edited by: venkat appikonda on Mar 18, 2008 6:32 PM

Problem using Submit statement

Dear Experts,
I am trying to use submit statement in a report for transaction ML85. I have used the below code.
submit RMSRVF00 with FRGCO = 'S1'
                with FRGGR = 'S1'
                with listu = 'ENTRY_REL'
                with ebeln = '4500000309'
                AND RETURN.
But when I execute the report the values which I set are not filled and the screens opens with error message as '' Fill in all required entry fields". I am passing values for fields Releasecode - FRGCO, Release group - FRGGR, Purchase Order - EBELN, Scope of list - LISTU.
Please tell me why this message is coming and values are not set for fields.
KR,
Bharath

hai,
try like this
SUBMIT ZVENDOR_REPORT_NEW1 USING SELECTION-SCREEN '100'
              WITH SELECTION-TABLE TB_OUTPUT
               WITH P_DATE = SY-DATUM
               WITH S_ERDAT BETWEEN '01.01.2008' AND '01.06.2008'
               AND RETURN.
or you can go in this way using type pools:
TYPE-POOLS RSDS.
DATA: TRANGE                        TYPE RSDS_TRANGE,
      TRANGE_LINE                   LIKE LINE OF TRANGE,
      TRANGE_FRANGE_T_LINE          LIKE LINE OF TRANGE_LINE-FRANGE_T,
      TRANGE_FRANGE_T_SELOPT_T_LINE LIKE LINE OF TRANGE_FRANGE_T_LINE-SELOPT_T,
      TEXPR                         TYPE RSDS_TEXPR.
TRANGE_LINE-TABLENAME = 'TB_OUTPUT'.
TRANGE_FRANGE_T_LINE-FIELDNAME = 'S_ERDAT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN   = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'BT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW    = '01.01.2008'.
TRANGE_FRANGE_T_SELOPT_T_LINE-HIGH   = '01.06.2008'.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN   = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'NE'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW    = SY-DATUM.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
APPEND TRANGE_FRANGE_T_LINE TO TRANGE_LINE-FRANGE_T.
APPEND TRANGE_LINE TO TRANGE.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    FIELD_RANGES = TRANGE
IMPORTING
    EXPRESSIONS = TEXPR.
SUBMIT ZVENDOR_REPORT_NEW1 VIA SELECTION-SCREEN
               WITH SELECTION-TABLE TB_OUTPUT
                WITH FREE SELECTIONS TEXPR AND RETURN.

How to export to memory using submit statement?

hi friends,
There is a standard report RPTQTA10.
After executing this report using submit statement i want get the result from the QTTRANS itable of RPTQTA10 to our local itab of BSP.
After this from local itab of BSP i want display some fields of local itba.
Any solutions plz....
Regards,
shankar.

hi,
thanks for ur reply.
but i am getting error like this in IE.
Note
The following error text was processed in the system IT3 : Exception condition "CNTL_ERROR" raised.
The error occurred on the application server itcsvr_IT3_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CONSTRUCTOR of program CL_GUI_CUSTOM_CONTAINER=======CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Module: PBO of program SAPLSLVC_FULLSCREEN
Function: REUSE_ALV_GRID_DISPLAY of program SAPLSLVC_FULLSCREEN
Form: DISPLAY_LIST of program RPTQTA10
END-OF-SELECTION of program RPTQTA10
And my BSP code is like this in OnInitialization event.
SUBMIT rptqta10
WITH PNPPERNR-LOW = w_pernr
EXPORTING LIST TO MEMORY AND RETURN.
data: field(25).
field-symbols: <fs_tab> type STANDARD table.
field = '(RPTQTA10)QTTRANS[]'.
assign (field) to <fs_tab>.
MOVE <FS_TAB>[] TO it_qttrans[].
Here it_qttrans is local itab of BSP.
Regards,
Shankar.

Problem in spool generation using SUBMIT statement

Hi Experts,
                  I am facing a problem in getting the spool no using the SUBMIT statemet.I am exporting an internal table with some data and then importing the same in another dummy program to get the ALV list output.This dummy program is called using the SUBMIT TO SAP-SPOOL statement.
The code is as follows:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
The trouble is the submit statement is not calling the dummy program in this case.What can be the problem here and how can it be resolved.In my dummy program I am simply using the exported table to convert into list display so as to get a spool no. for it.
   My objective is to get the spool no. for this sothat I can convert this spool to PDF.
Thanks and Regards
Abhishek
Edited by: abhishek singh on Oct 27, 2009 9:26 PM
Edited by: abhishek singh on Oct 27, 2009 9:27 PM
Edited by: abhishek singh on Oct 27, 2009 9:29 PM
Edited by: Rob Burbank on Oct 27, 2009 4:41 PM

Hi Experts ,
                    I am posting the code again:
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = lv_name
    IMPORTING
      jobcount         = lv_number
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
IF sy-subrc = 0.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        archive_mode         = gc_spool_print      "For print = '1'
        no_dialog            = abap_true
      IMPORTING
        out_parameters       = lv_print_parameters
        valid                = lv_valid_flag
      EXPORT fui_fin_split TO MEMORY ID 'CUSTOMER'.
      SUBMIT zvrr9333_dummy TO SAP-SPOOL
                            SPOOL PARAMETERS lv_print_parameters
                            WITHOUT SPOOL DYNPRO
                            VIA JOB lv_name NUMBER lv_number
                            AND RETURN.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = lv_number
            jobname              = lv_name
            strtimmed            = abap_true        "Immediate Start
          MESSAGE 'Spool not created'(e15) TYPE gc_success.
        ENDIF.
SELECT jobname
         jobcount
         stepcount
         listident
FROM tbtcp
INTO TABLE gi_spool
WHERE jobname EQ fuv_name
AND   jobcount EQ fuv_number.
IF sy-subrc EQ 0.
    READ TABLE gi_spool INTO lw_spool INDEX 1.
    fcv_spoolno = lw_spool-listident.
ENDIF.
SELECT jobname
         jobcount
         stepcount
         listident
FROM tbtcp
INTO TABLE gi_spool
WHERE jobname EQ fuv_name
AND   jobcount EQ fuv_number.
IF sy-subrc EQ 0.
    READ TABLE gi_spool INTO lw_spool INDEX 1.
    fcv_spoolno = lw_spool-listident.
ENDIF.

How to use Submit Statement for mutiple Spools.

Hi Gurus,
I have a requirement wherein I need to Submit a Report Program to SAP-SPOOL which generates output for multiple Idocs.
For each Idoc I need to attach the spool to a particular object_id.
As of now I am doing this by putting the Submit statement in a loop.
I want to meet the same functionality without using a loop for different Idocs.
Ex.
LOOP AT IDOCS.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
CALL FUNCTION 'JOB_OPEN'
IF sy-subrc = 0.
SUBMIT YFAPINV_IDOC_RPTS TO SAP-SPOOL    "USING SELECTION-SCREEN '1000'
    WITHOUT SPOOL DYNPRO
    SPOOL PARAMETERS print_parameters
    WITH CREDATE IN CREDATE
    WITH CRETIME IN CRETIME
    WITH DOCNUM IN DOCNUM
    WITH VENDOR IN VENDOR
    WITH V_INVOIC IN V_INVOIC
    WITH MESCODE IN MESCODE
    WITH DOCSTAT IN DOCSTAT
    WITH DC_NBR IN DC_NBR
    WITH DOC_TYPE IN DOC_TYPE
    WITH S_BSART IN S_BSART
    WITH ap1_flag eq 'X'
    AND RETURN.
IF sy-subrc EQ 0.
    CALL FUNCTION 'JOB_CLOSE'
ENDIF.
ENDIF.
SELECT rqident rqcretime FROM tsp01
INTO (rqident,rqcretime)
WHERE rqowner = sy-uname
ORDER BY rqcretime DESCENDING.
EXIT.
ENDSELECT.
IF rqident IS NOT INITIAL.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
DATA l_line TYPE docs-lines.
LOOP AT l_tline.
    CLEAR l_line.
    MOVE l_tline-tdline TO l_line.
    l_docs-lines = l_line.
    APPEND l_docs.
ENDLOOP.
ENDIF.

Hi,
Each submit will create only one spool. So I dont think this is possible. Yes what you can do though is that submit the program for all the IDocs at once ( provided your program YFAPINV can handle this) and then process the spool and separate the output for each IDoc after you retrieve the data from spool.
To retrieve the data from the spool, you can use the function 'RSPO_RETURN_ABAP_SPOOLJOB' pass the spool request number and it will return you a internal table with the spool data.
regards,
Advait

Using Submit statement

Hi,
I want to create a delivery from sales order using 'Submit'.
Is this a correct program? What needs to be populated in the table rspar_tab? Please provide your input.
data: rspar_tab TYPE TABLE OF rsparams.
SUBMIT SAPMV50A USING SELECTION-SCREEN '4001'
with selection-table rspar_tab.
Thanks in advance.

Hi Krishen,
Why dont u try using the BAPI.
You can use the BAPI BAPI_DELIVERYPROCESSING_EXEC.
Check this sample code..
PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
INTO TABLE t_vbap
FROM vbap
WHERE vbeln = p_vbeln.
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
   request = t_request
   createditems = t_created
   return = t_return.
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
READ TABLE t_created INDEX 1.
Write: / 'Delivery ', t_created-document_numb.

How to pass a value and call SE38 program using SUBMIT statement

Hello Friends
I am trying to write a batch program in SE38, that calls other SE38 Programs.
I don't want to use Parameter command to see the value on screen.
All I want is to send a range of date (ToDate & FromDate) and generate different reports satisfying this date range condition.
Can some one please help me with this. I would really appreciate it.
I have tried the command SUBMIT with options of filling the input fields of the subsequent programs but I don't want to do this.
I want all the sub programs to be called one after another and the reports generated using the date varialbles I send from the main program.
I don't want to use se37 functions because of the client's request.
Any help will be highly appreciated.
Tks
Ram

Yes I am using SUBMIT command but I was not using the right options with the SUBMIT command and once I used the right options, it worked.
Tks
Ram

Dout in Submit statement in print program....

Hi all,
In my print program, after printing my forms i need to call another print program. For this im using SUBMIT statement.
I hope my print program goes to an update task. So when it encounters a function module or submit statement it coming out of the print program.
The same logic is working fine when i click 'PRINT PREVIEW' button in the shop papers list of IW32 Transaction. But the control comes out of the program when i go through the PRINT button in the IW32 transaction.
Im not sure whether the control is coming out cuz of any update task.
So please help on this. It's urgent.
Thanks,
karthik

SUBMIT always starts new LUW. Not sure if I understand the rest of your "doubt"... You might want to read a bit more on the LUW concept and also check the ABAP documentation on SUBMIT.
http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4b9a79e11d1950f0000e82de14a/frameset.htm

How to pass radiobuttons using a submit statements.

Hi All,
Can anyone tell me how to pass radiobuttons using Submit statement.
My problem is that I am able to pass one select option and one parameter using the statement:
submit (v_repid) to sap-spool without spool dynpro
 spool parameters s_print_parms
 using selection-screen '1000' WITH SELECTION-TABLE t_rspar_tab
 and return.
This selection screens got to check selections based on 2 radio buttons available in the selection screen which also i need to pass through SUBMIT.Please let me know how do i pass this to the Submit statement.
Thankx in advance...
Helpful answers will be rewarded fully...

Hi Susanth,
 Create Variant for the calling program, Give that variant( here in the below program variant for calling program that I created is VAR1) in the calling program in SUBMIT Statement.

CALLING PROGRAM:

data:
w_variant(5) TYPE c VALUE 'VAR1'.
SUBMIT YH625_CALLED_PROGRAM USING SELECTION-SET w_variant.
CALLING PROGRAM:
TABLES spfli.
parameters:
 w_radio1 RADIOBUTTON GROUP g1,
 w_radio2 RADIOBUTTON GROUP g1.
SELECT-OPTIONS s_table FOR spfli-carrid.
WRITE '*************** This is Called program output **********************'.
Hope this solves your problem.
If you any query you are welcome.
Regards,
V.Raghavender.

Dout in Submit Statement....

Hi all,
In my print program, after printing my forms i need to call another print program. For this im using SUBMIT statement.
I hope my print program goes to an update task. So when it encounters a function module or submit statement its coming out of the print program.
The same logic is working fine when i click 'PRINT PREVIEW' button in the shop papers list of IW32 Transaction. But the control comes out of the program when i go through the PRINT button in the IW32 transaction.
Im not sure whether the control is coming out cuz of any update task.
So please help on this. It's urgent.
Thanks,
karthik

SUBMIT always starts new LUW. Not sure if I understand the rest of your "doubt"... You might want to read a bit more on the LUW concept and also check the ABAP documentation on SUBMIT.
http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4b9a79e11d1950f0000e82de14a/frameset.htm

How to send report output from SUBMIT statement

Hi,
I need to develop one report whcih can be use to send any report output in mail as attachment in txt of execl format. So i will be using SUBMIT statement to execute the report in my new report and i need to convert the reportout in txt or excel format and need to send as attachment in mail. This new report can be use to execute any report which may have ALV GRid, Normal outout screen. So what could be the best way to develop this kind of report.
Br,
Piyush

>
piyush mathur wrote:
> Hi Suhas,
>
> LIST_TO_ASCI will give me data in lines. and its difficult to separate the columns in another internal table for attachment file. As this report is going to use to send any report output so i can not fixed the delimiter. So i am looking some function which can split the data in columns when I am reading from List.
> Br,
> Piyush
No need to seperate nothing additionally, this will come automatically in the attached file. Draft below
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT your_report EXPORTING LIST TO MEMORY
              AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
DATA string_tab TYPE list_string_table.
"use table type appropriate for attchement
DATA ascii_tab TYPE soli_tab.
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
   listasci                 = ascii_tab
   listobject               = list_tab.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename = 'C:\test.txt'
    filetype = 'ASC'
TABLES
    data_tab = ascii_tab.
DATA go_email_doc TYPE REF TO cl_document_bcs.
go_email_doc = cl_document_bcs=>create_document(
                                      i_type = 'TXT'
go_email_doc->add_attachment( i_attachment_type = 'TXT'
                              i_attachment_subject = 'My Attachment'
                              i_att_content_text = ascii_tab ).
Regards
Marcin

Problem in submit statement ?

hi friends..
i have one report program (for eg zpgm1) from that i call another program (for eg zpgm2) by using submit statement.
in zpgm1 i have only one radio button
in zpgn2 i have one parameter with obligatory.
the issue is
while executing from zpgm1 it will call the zpgm2 but it show error message like "parameter is required field" because its an mandatory field.
i don't want that message while submit ..
can you plz..
thanx in advance

try this if it works.
in the zpgm2 , instead of making the parameter as OBLIGATORY , do a validation on that field
eg
instead of this
parameters : p_matnr like mara-matnr obligatory.
use this
parameters : p_matnr like mara-matnr.
at selection-screen.
if p_matnr is initial.
message e001(ZE) with 'Matnr is mandatory field'.
endif.

In RFC can we use SUBMIT satement?

Dear all,
Thank u vvery much for ur response,
In RFC can we use SUBMIT statement?
I had a doubt Please clarify me.
Thanks and Regards,

Hi Lakshman,
I am facing similar situation like Ravi.
I am using Submit program inside RFC function module in BW.
And one point here, I am using EXPORT and IMPORT memory IDs in the same RFC to retrive data in BW.
I am calling this from R3.
In BW it is working fine, where as in R3 nothing is coming.
Please help me.
Thanks,
Veerendra.

Regarding SUBMIT Statement

Hi,
I am calling a batch job (B) (in back groung) using SUBMIT statement, from a report program (Say A). But I have to Pass some internal tables and few variable to the Batch job (B).
Can someone tell me how I can pass the Internal tables and variables ? Is it possible to pass through SUBMIT statement only? Is there some other than the use of Import-Export statement?
Thanks and regards,
Pankaj Bist.

Hi pankaj,
SUBMIT <PROGRAM NAE> = ds_name " Creating batch input session
 WITH fl_check = fl_check
 WITH os_xon = os_xon
 WITH xnonunic = xnonunic
 WITH callmode = callmode
 WITH max_comm = max_comm
 WITH pa_xprot = pa_xprot
 WITH anz_mode = anz_mode
 WITH update = update
 WITH xpop = xpop
 WITH xlog = xlog
 WITH xinf = xinf AND RETURN.
u can pass the variables like this.
the variables which i have pass to the program all are the selection screen aprameteers of the program .
I hope this will work for you.
Thanks,

Printing using SUBMIT statement

Similar Messages

Maybe you are looking for