Problem in spool generation using SUBMIT statement
Hi Experts,
I am facing a problem in getting the spool no using the SUBMIT statemet.I am exporting an internal table with some data and then importing the same in another dummy program to get the ALV list output.This dummy program is called using the SUBMIT TO SAP-SPOOL statement.
The code is as follows:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
The trouble is the submit statement is not calling the dummy program in this case.What can be the problem here and how can it be resolved.In my dummy program I am simply using the exported table to convert into list display so as to get a spool no. for it.
My objective is to get the spool no. for this sothat I can convert this spool to PDF.
Thanks and Regards
Abhishek
Edited by: abhishek singh on Oct 27, 2009 9:26 PM
Edited by: abhishek singh on Oct 27, 2009 9:27 PM
Edited by: abhishek singh on Oct 27, 2009 9:29 PM
Edited by: Rob Burbank on Oct 27, 2009 4:41 PM
Hi Experts ,
I am posting the code again:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = lv_name
IMPORTING
jobcount = lv_number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
archive_mode = gc_spool_print "For print = '1'
no_dialog = abap_true
IMPORTING
out_parameters = lv_print_parameters
valid = lv_valid_flag
EXPORT fui_fin_split TO MEMORY ID 'CUSTOMER'.
SUBMIT zvrr9333_dummy TO SAP-SPOOL
SPOOL PARAMETERS lv_print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB lv_name NUMBER lv_number
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = lv_number
jobname = lv_name
strtimmed = abap_true "Immediate Start
MESSAGE 'Spool not created'(e15) TYPE gc_success.
ENDIF.
SELECT jobname
jobcount
stepcount
listident
FROM tbtcp
INTO TABLE gi_spool
WHERE jobname EQ fuv_name
AND jobcount EQ fuv_number.
IF sy-subrc EQ 0.
READ TABLE gi_spool INTO lw_spool INDEX 1.
fcv_spoolno = lw_spool-listident.
ENDIF.
SELECT jobname
jobcount
stepcount
listident
FROM tbtcp
INTO TABLE gi_spool
WHERE jobname EQ fuv_name
AND jobcount EQ fuv_number.
IF sy-subrc EQ 0.
READ TABLE gi_spool INTO lw_spool INDEX 1.
fcv_spoolno = lw_spool-listident.
ENDIF.
Similar Messages
-
Create spool for background jobs which uses submit statement
Hi Gurus,
I have a quick question regarding the backgroud jobs. When we run a program in the background , it should create a spool for us, but, the problem comes when I am running a program in the background, its not creating the spool. This program uses SUBMIT statement. This program collects the data and it will submit to the other program and then retuen. In this case, its not creating a spool. Its very important for us to look at the spool for this program. Does anybody cam across this kind of problem? I need ur inputs.
Thanks in advance, <REMOVED BY MODERATOR>
Regards,
Srinivas.
Edited by: Alvaro Tejada Galindo on Mar 18, 2008 4:31 PMhi check this link ...
Scheduling a submitable program as a background task with the number number in a background request name. After scheduling, the background task is completed by function module JOB_CLOSE and released immediately.
DATA: number TYPE tbtcjob-jobcount,
name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=backgroundsubmit&adv=false&sortby=cm_rnd_rankvalue
sy-subrc Meaning
0 Background task scheduled successfully.
4 Scheduling cancelled by user on the selection screen.
8 Error during scheduling, i.e. when accessing JOB_SUBMIT internally.
12 Error in internal number assignment.
regards,
venkat.
Edited by: venkat appikonda on Mar 18, 2008 6:32 PM -
Problem using Submit statement
Dear Experts,
I am trying to use submit statement in a report for transaction ML85. I have used the below code.
submit RMSRVF00 with FRGCO = 'S1'
with FRGGR = 'S1'
with listu = 'ENTRY_REL'
with ebeln = '4500000309'
AND RETURN.
But when I execute the report the values which I set are not filled and the screens opens with error message as '' Fill in all required entry fields". I am passing values for fields Releasecode - FRGCO, Release group - FRGGR, Purchase Order - EBELN, Scope of list - LISTU.
Please tell me why this message is coming and values are not set for fields.
KR,
Bharathhai,
try like this
SUBMIT ZVENDOR_REPORT_NEW1 USING SELECTION-SCREEN '100'
WITH SELECTION-TABLE TB_OUTPUT
WITH P_DATE = SY-DATUM
WITH S_ERDAT BETWEEN '01.01.2008' AND '01.06.2008'
AND RETURN.
or you can go in this way using type pools:
TYPE-POOLS RSDS.
DATA: TRANGE TYPE RSDS_TRANGE,
TRANGE_LINE LIKE LINE OF TRANGE,
TRANGE_FRANGE_T_LINE LIKE LINE OF TRANGE_LINE-FRANGE_T,
TRANGE_FRANGE_T_SELOPT_T_LINE LIKE LINE OF TRANGE_FRANGE_T_LINE-SELOPT_T,
TEXPR TYPE RSDS_TEXPR.
TRANGE_LINE-TABLENAME = 'TB_OUTPUT'.
TRANGE_FRANGE_T_LINE-FIELDNAME = 'S_ERDAT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'BT'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW = '01.01.2008'.
TRANGE_FRANGE_T_SELOPT_T_LINE-HIGH = '01.06.2008'.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
TRANGE_FRANGE_T_SELOPT_T_LINE-SIGN = 'I'.
TRANGE_FRANGE_T_SELOPT_T_LINE-OPTION = 'NE'.
TRANGE_FRANGE_T_SELOPT_T_LINE-LOW = SY-DATUM.
APPEND TRANGE_FRANGE_T_SELOPT_T_LINE TO TRANGE_FRANGE_T_LINE-SELOPT_T.
APPEND TRANGE_FRANGE_T_LINE TO TRANGE_LINE-FRANGE_T.
APPEND TRANGE_LINE TO TRANGE.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
FIELD_RANGES = TRANGE
IMPORTING
EXPRESSIONS = TEXPR.
SUBMIT ZVENDOR_REPORT_NEW1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE TB_OUTPUT
WITH FREE SELECTIONS TEXPR AND RETURN. -
Printing using SUBMIT statement
Hi
I have a problem in printing using SUBMIT.
I have three printers identified to print certain orders using submit statement.
the list of printers is given in a drop down and once the user selects a printer from the list, i have to generate a spool for the corresponding printer. But this is not happening. The spool is generated for the user's default printer defined in SU50. I have my submit statement below:
SUBMIT zppprbsel WITH aufnr EQ p_wa_batch_res_process_order
WITH werks EQ c_1201 "'1201'
WITH relvn EQ c_0 "'00000000'
WITH relbs EQ c_0 "'00000000'
WITH orig EQ ' '
WITH nach EQ c_x "'X'
TO SAP-SPOOL
*SPOOL PARAMETERS l_dest
WITHOUT SPOOL DYNPRO
WITH DESTINATION = l_dest
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X'
VIA JOB v_job_name
NUMBER v_job_cnt
AND RETURN.
here my l_dest has one of the three printers that the user selects.
when i change my default printer to one of the three printers the spool is generated fine. A spool always generated for the default printer of the user?Hi,
Before the SUBMIT get the PRINT PARAMETER by using the FM --> GET_PRINT_PARAMETERS
IMPORTING
out_parameters = print_parameters
print_parameters-pdest = 'LOCL'. " Change the Destination before passsing the PRINT_PARAMETER to SUBMIT.
Then pass the print_parameters from the FM to the SUBMIT
SUBMIT zppprbsel WITH aufnr EQ p_wa_batch_res_process_order
WITH werks EQ c_1201 "'1201'
WITH relvn EQ c_0 "'00000000'
WITH relbs EQ c_0 "'00000000'
WITH orig EQ ' '
WITH nach EQ c_x "'X'
TO SAP-SPOOL
SPOOL PARAMETERS print_parameters "Pass here
WITHOUT SPOOL DYNPRO
WITH DESTINATION = l_dest
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X'
VIA JOB v_job_name
NUMBER v_job_cnt
AND RETURN.
Regards,
Madhukar Shetty -
Problem for xml generation using DBMS_XMLGEN
Hi All,
i have problem during xml generation using Any help would be highly appreciate
how could we publish xml data using data base API DBMS_XMLGEN in oracle applications (APPS) i.e. at 'View Output" using
Any help would be highly appreciate.
Let me know if need more explanation, this is High priority for me.
Thanks and Regards,
[email protected]
Message was edited by:
user553699You can set the null attribute to true , so that the tag appears in your XML
see the statement in Bold.
DECLARE
queryCtx dbms_xmlquery.ctxType;
result CLOB;
BEGIN
-- set up the query context
queryCtx := dbms_xmlquery.newContext(
'SELECT empno "EMP_NO"
, ename "NAME"
, deptno "DEPT_NO"
, comm "COMM"
FROM scott.emp
WHERE deptno = :DEPTNO'
dbms_xmlquery.setRowTag(
queryCtx
, 'EMP'
dbms_xmlquery.setRowSetTag(
queryCtx
, 'EMPSET'
DBMS_XMLQUERY.useNullAttributeIndicator(queryCtx,true);
dbms_xmlquery.setBindValue(
queryCtx
, 'DEPTNO'
, 30
result := dbms_xmlquery.getXml(queryCtx);
insert into clobtable values(result);commit;
dbms_xmlquery.closeContext(queryCtx);
END;
select * from clobtable
<?xml version = '1.0'?>
<EMPSET>
<EMP num="1">
<EMP_NO>7499</EMP_NO>
<NAME>ALLEN</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM>300</COMM>
</EMP>
<EMP num="2">
<EMP_NO>7521</EMP_NO>
<NAME>WARD</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM>500</COMM>
</EMP>
<EMP num="3">
<EMP_NO>7654</EMP_NO>
<NAME>MARTIN</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM>1400</COMM>
</EMP>
<EMP num="4">
<EMP_NO>7698</EMP_NO>
<NAME>BLAKE</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM NULL="YES"/>
</EMP>
<EMP num="5">
<EMP_NO>7844</EMP_NO>
<NAME>TURNER</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM>0</COMM>
</EMP>
<EMP num="6">
<EMP_NO>7900</EMP_NO>
<NAME>JAMES</NAME>
<DEPT_NO>30</DEPT_NO>
<COMM NULL="YES"/>
</EMP>
</EMPSET>
http://sqltech.cl/doc/oracle9i/appdev.901/a89852/d_xmlque.htm -
How to export to memory using submit statement?
hi friends,
There is a standard report RPTQTA10.
After executing this report using submit statement i want get the result from the QTTRANS itable of RPTQTA10 to our local itab of BSP.
After this from local itab of BSP i want display some fields of local itba.
Any solutions plz....
Regards,
shankar.hi,
thanks for ur reply.
but i am getting error like this in IE.
Note
The following error text was processed in the system IT3 : Exception condition "CNTL_ERROR" raised.
The error occurred on the application server itcsvr_IT3_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CONSTRUCTOR of program CL_GUI_CUSTOM_CONTAINER=======CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Module: PBO of program SAPLSLVC_FULLSCREEN
Function: REUSE_ALV_GRID_DISPLAY of program SAPLSLVC_FULLSCREEN
Form: DISPLAY_LIST of program RPTQTA10
END-OF-SELECTION of program RPTQTA10
And my BSP code is like this in OnInitialization event.
SUBMIT rptqta10
WITH PNPPERNR-LOW = w_pernr
EXPORTING LIST TO MEMORY AND RETURN.
data: field(25).
field-symbols: <fs_tab> type STANDARD table.
field = '(RPTQTA10)QTTRANS[]'.
assign (field) to <fs_tab>.
MOVE <FS_TAB>[] TO it_qttrans[].
Here it_qttrans is local itab of BSP.
Regards,
Shankar. -
How to use Submit Statement for mutiple Spools.
Hi Gurus,
I have a requirement wherein I need to Submit a Report Program to SAP-SPOOL which generates output for multiple Idocs.
For each Idoc I need to attach the spool to a particular object_id.
As of now I am doing this by putting the Submit statement in a loop.
I want to meet the same functionality without using a loop for different Idocs.
Ex.
LOOP AT IDOCS.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
CALL FUNCTION 'JOB_OPEN'
IF sy-subrc = 0.
SUBMIT YFAPINV_IDOC_RPTS TO SAP-SPOOL "USING SELECTION-SCREEN '1000'
WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS print_parameters
WITH CREDATE IN CREDATE
WITH CRETIME IN CRETIME
WITH DOCNUM IN DOCNUM
WITH VENDOR IN VENDOR
WITH V_INVOIC IN V_INVOIC
WITH MESCODE IN MESCODE
WITH DOCSTAT IN DOCSTAT
WITH DC_NBR IN DC_NBR
WITH DOC_TYPE IN DOC_TYPE
WITH S_BSART IN S_BSART
WITH ap1_flag eq 'X'
AND RETURN.
IF sy-subrc EQ 0.
CALL FUNCTION 'JOB_CLOSE'
ENDIF.
ENDIF.
SELECT rqident rqcretime FROM tsp01
INTO (rqident,rqcretime)
WHERE rqowner = sy-uname
ORDER BY rqcretime DESCENDING.
EXIT.
ENDSELECT.
IF rqident IS NOT INITIAL.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
DATA l_line TYPE docs-lines.
LOOP AT l_tline.
CLEAR l_line.
MOVE l_tline-tdline TO l_line.
l_docs-lines = l_line.
APPEND l_docs.
ENDLOOP.
ENDIF.Hi,
Each submit will create only one spool. So I dont think this is possible. Yes what you can do though is that submit the program for all the IDocs at once ( provided your program YFAPINV can handle this) and then process the spool and separate the output for each IDoc after you retrieve the data from spool.
To retrieve the data from the spool, you can use the function 'RSPO_RETURN_ABAP_SPOOLJOB' pass the spool request number and it will return you a internal table with the spool data.
regards,
Advait -
Problem with background job using SUBMIT under different user
Hi All,
I am submitting a background job under different user name. I am submitting this job by using JOB_OPEN , SUBMIT report and JOB_CLOSE. But submit statement is returning sy-subrc 8, becuase of this the job_close is failed. Can you please help me to solve this problem.
Thanks in advance.
TjguptaHi,
The user is having all authorizations. is there any difference with user types?
This user is having user type " as communication data".
Thanks,
Tjgupta -
Hi,
I want to create a delivery from sales order using 'Submit'.
Is this a correct program? What needs to be populated in the table rspar_tab? Please provide your input.
data: rspar_tab TYPE TABLE OF rsparams.
SUBMIT SAPMV50A USING SELECTION-SCREEN '4001'
with selection-table rspar_tab.
Thanks in advance.Hi Krishen,
Why dont u try using the BAPI.
You can use the BAPI BAPI_DELIVERYPROCESSING_EXEC.
Check this sample code..
PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
INTO TABLE t_vbap
FROM vbap
WHERE vbeln = p_vbeln.
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
request = t_request
createditems = t_created
return = t_return.
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
READ TABLE t_created INDEX 1.
Write: / 'Delivery ', t_created-document_numb. -
How to pass a value and call SE38 program using SUBMIT statement
Hello Friends
I am trying to write a batch program in SE38, that calls other SE38 Programs.
I don't want to use Parameter command to see the value on screen.
All I want is to send a range of date (ToDate & FromDate) and generate different reports satisfying this date range condition.
Can some one please help me with this. I would really appreciate it.
I have tried the command SUBMIT with options of filling the input fields of the subsequent programs but I don't want to do this.
I want all the sub programs to be called one after another and the reports generated using the date varialbles I send from the main program.
I don't want to use se37 functions because of the client's request.
Any help will be highly appreciated.
Tks
RamYes I am using SUBMIT command but I was not using the right options with the SUBMIT command and once I used the right options, it worked.
Tks
Ram -
Problem With Invoice Generation using code
I have some sales orders - I put an button on the below of the sales order so that it will create the invoice through code. I CANT USE COPYTO option of sales order since i am adjusting some values while pressing the button.
What i have done....
1. Using get by key i read values from sales order.
2. Using objects of sales order and invoice i am binding values.
-- On Header
> Card code
> Card Name
> Date
OnLine
> Item Code
> Whs Code
> Quantity
> UnitPrice ( Calculated using the values in the sales order)
> Tax Code
Problem i have...
1. The amount till Total LC is correct. BUT NOT THE TAX AMOUNT.
2. When i checked the Tax Base amount -> Its different form the TOTAL LC column.
3. Then i noticed that - in header i saw some discount amount , but the discount % is null.
4. I have not given any discount on BP or any special price for BP.
5. I tried to put 1% discount on header but still the discount amount is more than 1%.
Please someone help me soon.
UPDATE TO MY ABOVE QUESTION....
I found that error was causing by the option i have activated - the Round off to one in financial set up...is there any other method for the round off with out using the setup...
Edited by: vibinvarghese on May 23, 2011 1:09 PMSome one find me an solution...this is causing me lot of problems now...
-
Problem in report generation using CrystalClear
hi
all
plz can anybody told me about the code which will help to display the
report using jsp. i m using crystal clear and want to add report
with my project.
plz send me code if anybody have
plz zzz
thanks in advancehi
all
plz can anybody told me about the code which will help to display the
report using jsp. i m using crystal clear and want to add report
with my project.
plz send me code if anybody have
plz zzz
thanks in advance -
How to pass radiobuttons using a submit statements.
Hi All,
Can anyone tell me how to pass radiobuttons using Submit statement.
My problem is that I am able to pass one select option and one parameter using the statement:
submit (v_repid) to sap-spool without spool dynpro
spool parameters s_print_parms
using selection-screen '1000' WITH SELECTION-TABLE t_rspar_tab
and return.
This selection screens got to check selections based on 2 radio buttons available in the selection screen which also i need to pass through SUBMIT.Please let me know how do i pass this to the Submit statement.
Thankx in advance...
Helpful answers will be rewarded fully...Hi Susanth,
Create Variant for the calling program, Give that variant( here in the below program variant for calling program that I created is VAR1) in the calling program in SUBMIT Statement.
<b>
CALLING PROGRAM:
</b>
data:
w_variant(5) TYPE c VALUE 'VAR1'.
SUBMIT YH625_CALLED_PROGRAM USING SELECTION-SET w_variant.
<b>CALLING PROGRAM:</b>
TABLES spfli.
parameters:
w_radio1 RADIOBUTTON GROUP g1,
w_radio2 RADIOBUTTON GROUP g1.
SELECT-OPTIONS s_table FOR spfli-carrid.
WRITE '*************** This is Called program output **********************'.
Hope this solves your problem.
If you any query you are welcome.
Regards,
V.Raghavender. -
Problem with spool request generation in Dialog program
Hi,
To give the spool and print functionality in dialog program i have used the function module code like below -
call function 'GET_PRINT_PARAMETERS'
exporting
mode = ' '
in_parameters = ls_pri_params
importing
out_parameters = ls_pri_params
valid = lv_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
IF lv_valid <> space AND sy-subrc = 0.
SUBMIT (sy-repid)
USER SY-UNAME TO SAP-SPOOL
SPOOL PARAMETERS ls_pri_params
WITHOUT SPOOL DYNPRO.
But the problem is, if it is list then we can easily get the print function, since i am using the above code in the dialog program screen 9000, program is giving dump like....
Incorrect program type with SUBMIT.
What happened?
The current ABAP/4 program "SAPMYXXXXXX" had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
You attempted to start a program not intended for this purpose.
I know that i should not use submit statement for dialog program, but what is the solution for this.
Thanks in advance..Did you check the F1 help of SUBMIT. if not give a try.Submit cannot be used on Module pool programs. it is used for Report(executable ) programs.
-
Spool Generation problem in Back ground
Hi,
Can some one let me know what is the problem in spool generation in the following scenario.
I have two reports:
ZF003 and ZF005.
ZF003 contains the ALV grid which actually outputs the list.
If i run this in background the spool is being generated bcoz it makes use of ALV grid.
we had a requirement to code some additional functionality in ZF005 and made use of ZF003 in the program ZF005.
ZF005 displays the ALV output when it is run in fore ground.but it is not generating the spool when run in the background.
Thanks in advance.
Regards,
Babul.Hi Aarun,
It doesnot handle any upload or download from PC.
Very much Thanks for ur suggestions.
But i have coded in ZF005 using ALV once again to generate the spool in background.
Maybe you are looking for
-
ShipMent and Delivery Extractor
Can somebody explain the differences between shipment extractors and Delivery Extractors (SD). when exactly we use shipment and when 2lis_12_vchdr or itm. If anybody has document on shipment please mail it <b>[email protected]</b> Regards Kunal
-
Order of Photographs in iPhoto 6.0.2
Hey there. I have recently been importing loads and loads of images into iPhoto, as you do. I have been using film and such, so have scanned in prints and film, arranged them in a folder, and imported that folder. Simulating the way a digital camera
-
How to achieve vietnamese language support for SAP?
Dear all, It's easy to add languages which are natively supported by SAP like Japanese, French... I wonder what are the things to do when we need language enablement for languages like vietnamese which are not yet supported by SAP. What we want to ac
-
[SOLVED] Search in a file
Hi! I'm working on a radio script with several functions, but i need your help to continue. I want to search for a spefic string in a file. The files content is like: Super Hot Girls Radio Channel;http://lovepotion.org:666 Sir Camelot Danish Radio;k
-
Powerbook g4 shuts down unexpectedly
I have had my computer for a year now. (bought used from a friend) I recently had to buy a new hard drive. After that, I had to install Leopard as the operating system. (I dont know correct terms, sorry!) It worked fine for a while, but now it will j