Printing with lines

Last week I worked with a print, got it perfected, printed it...beautiful. Just went to print it again - for final print, not just trial....all settings the same and now I get a print with vertical lines all down it. The only thing I had changed since last print was to spot/patch a small, small spot. Tried removing the spot retouch, thinking that may have changed things, but still prints with the lines. Anyone know what's up? I don't know if this is my printer or something between Aperture and printer. Using Aperture2 and HP Photosmart 8450.

I figured it out. Was my printer - apparently it never did an alignment when I put in photo ink cartridge. We're all good now.

Similar Messages

Pixma MG6320 - Photos print with lines at the bottom

I just setup my printer last night and tried to print some 4x6 photos. When the first photo was printing, the paper went crooked at the last inch of the paper, and it was blurry. I attempted 6 more prints, the paper stayed straight through the whole printing process but the last inch is printing blurry with lines going all across. I made sure that the paper size and type settings are correct on the printer. Has anyone had this issue? Any assitance would be appreciated!

Hello td512.
Additional troubleshooting will have to be done to narrow down the cause of your issue. Please contact our support group using the link below for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Check printing, with line item

Frnds
i posted almost 20 invoices for one vendor and tried to pay this vendor, when i ran the payment program, it paid all the line items but as it could not hold all the 20 items on one statement, so it printed only 14 line items and voided first check and then at the bottom of the first statement, it says Balance carry forward and it printed all the remaining 6 iline items with the balance carry forward on the second statement and printed valid check with total amount of all the 20 lin items.
so is there anyway whr i can change the settings and can put all the 20 line items on the one statement and will print only one valid check with the total of 20 line items, rather than splitting it in a two statement?
please reply asap
thanks

peter
i checked the box "dont void any checks", eventhough having this settings it voided the checks and just put 14 line items and rest it put it on next pages.
I dont know whr do we do this settings, it looks like something in Forms?
please reply, if you get something
thanks

HP 6940 suddenly printing with lines and red hue

Hello,
I was printing photos tonight with my 6940 and suddenly the photos started coming out with the first half (left sides) printed correctly, and the right half has a red hue and striated lines. I thought the black cartridge might be out, so I replaced it and the photos are coming out the same. I've just replaced the color cartridge a few weeks ago, so it is not empty. Any suggestions?
I tried printing 5 photos, and all came out the same way - left side is printed correctly, right side is ruined.
Right-click here and choose "Save As" to download a high res photo of the photos as they are coming out of the printer.
-Gina

Hi CrazySaguaro,
It appears as if your colour cartridge is out of ink. If this is the case you should be able to see this in your ink gauge through the driver tool box.
Here is steps how to check this
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00575972&lc=en&cc=us&dlc=&product=467980
it is located approx half way down the page
Please let me know what you find out.
Although I am an HP employee, I am speaking for myself and not for HP

Printing with line breaks

Hi,
I am using the following code to print some text from a text file.
import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import java.awt.print.*;
import java.io.BufferedReader;
import java.io.DataInputStream;
import java.io.FileInputStream;
import java.io.InputStreamReader;
import java.text.*;
public class Print implements Printable {
private static final String mText = "";
private static AttributedString mStyledText = new AttributedString(mText);
    static public void main() {
        String toPrint = "";
        try {
            FileInputStream fstream = new FileInputStream("/Library/iDemo/print.txt");
            DataInputStream in = new DataInputStream(fstream);
            BufferedReader br = new BufferedReader(new InputStreamReader(in));
            String strLine;
            while ((strLine = br.readLine()) != null) {
                toPrint = toPrint + System.getProperty("line.separator") + strLine;
            in.close();
        } catch (Exception e)
            System.err.println("Error: " + e.getMessage());
        mStyledText = new AttributedString(toPrint);
        PrinterJob printerJob = PrinterJob.getPrinterJob();
Book book = new Book();
book.append(new Print(), new PageFormat());
printerJob.setPageable(book);
boolean doPrint = printerJob.printDialog();
if (doPrint) {
try {
printerJob.print();
} catch (PrinterException exception) {
System.err.println("Printing error: " + exception);
public int print(Graphics g, PageFormat format, int pageIndex)
Graphics2D g2d = (Graphics2D) g;
g2d.translate(format.getImageableX(), format.getImageableY());
g2d.setPaint(Color.black);
        Point2D.Float pen = new Point2D.Float();
        AttributedCharacterIterator charIterator = mStyledText.getIterator();
        LineBreakMeasurer measurer = new LineBreakMeasurer(charIterator, g2d.getFontRenderContext());
        float wrappingWidth = (float) format.getImageableWidth();
        while (measurer.getPosition() < charIterator.getEndIndex())
            TextLayout layout = measurer.nextLayout(wrappingWidth);
            pen.y += layout.getAscent();
            float dx = layout.isLeftToRight() ? 0 : (wrappingWidth - layout.getAdvance());
            layout.draw(g2d, pen.x + dx, pen.y);
            pen.y += layout.getDescent() + layout.getLeading();
        return Printable.PAGE_EXISTS;
}The problem I am having is that it removes the line breaks when printing. I have checked the file I am reading from and that has the line breaks. How can I get it to include the line breaks?
Thanks

The problem is that once it prints all this the line break is gone.
Up until the following code the line breaks are fine. However, the printed document I'm getting has no line breaks at all.
mStyledText = new AttributedString(toPrint);
        PrinterJob printerJob = PrinterJob.getPrinterJob();
Book book = new Book();
book.append(new Print(), new PageFormat());
printerJob.setPageable(book);
boolean doPrint = printerJob.printDialog();
if (doPrint) {
try {
printerJob.print();
} catch (PrinterException exception) {
System.err.println("Printing error: " + exception);
public int print(Graphics g, PageFormat format, int pageIndex)
Graphics2D g2d = (Graphics2D) g;
g2d.translate(format.getImageableX(), format.getImageableY());
g2d.setPaint(Color.black);
        Point2D.Float pen = new Point2D.Float();
        AttributedCharacterIterator charIterator = mStyledText.getIterator();
        LineBreakMeasurer measurer = new LineBreakMeasurer(charIterator, g2d.getFontRenderContext());
        float wrappingWidth = (float) format.getImageableWidth();
        while (measurer.getPosition() < charIterator.getEndIndex())
            TextLayout layout = measurer.nextLayout(wrappingWidth);
            pen.y += layout.getAscent();
            float dx = layout.isLeftToRight() ? 0 : (wrappingWidth - layout.getAdvance());
            layout.draw(g2d, pen.x + dx, pen.y);
            pen.y += layout.getDescent() + layout.getLeading();
        return Printable.PAGE_EXISTS;
}

Why does my photos print with lines in them?

I make sure I clean my printhead, ink smear & do a printer alignment page before I print but my photos have lines or smears in them. What can I do to print nice pictures without the lines?

Butterfly_su, welcome to the forum.
What is the model of the computer? This is necessary for us to access the specifications of it.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to print header lines at the top of every page with Alv list display?

Dear all,
I need a requirement with printing issue. A program list should be printed with the function reuse_alv_list_display.
The list has several pages and then can be printed but the header lines appear only first page when they printed. The other pages don't have header lines, they continue with the next record of the list remaining from previous page. I use the alv parameters as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_pf_status_set = 'ALV_PF_STATUS'
      is_layout                = ls_layo
      it_fieldcat              = lt_fcat
      i_default                = 'X'
      i_save                   = 'A'
      is_variant               = ls_variant
      it_events                = lt_events
    TABLES
      t_outtab                 = lt_data
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
and lt_events as below:
ls_event-name = 'END_OF_LIST'.
ls_event-form = 'ALV_END_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'ALV_END_OF_PAGE'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_LIST'.
ls_event-form = 'ALV_TOP_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'ALV_TOP_OF_PAGE'.
APPEND ls_event TO lt_events.
So, how can I print header lines for every page?
Best Regards,

Hello Saba,
Your point might be very close to solution.
Because in the selection screen of the program there are two radio buttons, one of them visits 'REUSE_ALV_COMMENTARY_WRITE' function and the other doesn't. The one which visits has a problem with header liens in every page when printing. But I couldn't find out the solution yet.
reuse_alv_list_display uses 4 event and of course I call subroutine. There are end_of_list, end_of_page, top_of_list and top_of_page. I use in the subroutine for top_of_page:
CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
    EXPORTING
      it_fieldcat_lvc         = gt_fcat
    IMPORTING
      et_fieldcat_alv         = lt_fcat
    EXCEPTIONS
      it_data_missing         = 1
      it_fieldcat_lvc_missing = 2
      OTHERS                  = 3.
CALL FUNCTION 'REUSE_ALV_LIST_WIDTH_GET'
    EXPORTING
      it_fieldcat = lt_fcat
    IMPORTING
      e_width     = l_width.
WRITE l_reptx TO l_reptx CENTERED.
NEW-LINE.
WRITE: AT (l_width) l_reptx CENTERED.
SUBTRACT 10 FROM l_width.
WRITE: AT l_width sy-pagno RIGHT-JUSTIFIED.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        it_list_commentary       = lt_header
I_LOGO                   =
I_END_OF_LIST_GRID       =
Do you have other suggestions ?

Problem with line items print in Script MAIN window.

Dear Friends,
I am facing a problem with display the line items in main window.
Here i have created my form with 2 pages,
in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
i am having the Footer information about to off the page.
and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
my client want me to remove that place also. he wants to display continue..
i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
Thanks
Sridhar.

Hi Sridher,
If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
Regards,
Vidya.

AR Invoice Print - Print on Preprinted stationary with Line comments & more

Hi All,
I have a requirement to print a report in XMLP for AR Invoice Print.
Requirement
For Template Body - Line Items
Line 1-------------------------------------------------------------------------------------
Line 2-------------------------------------------------------------------------------------
Line 3-------------------------------------------------------------------------------------
----------------------<LINE COMMENT>----------------------This will be line :4
Line 5-------------------------------------------------------------------------------------
Line 6-------------------------------------------------------------------------------------
Line 7-------------------------------------------------------------------------------------
----------------------<LINE COMMENT WITH 2 LINES - So the 2nd line will wrap >-----This will be line :8 and 9
Line 10-------------------------------------------------------------------------------------
1. Display 10 lines per page
2. If there are Line comments for the particular line description then print the line comment in the next line as shown above - So it starts from the begin of the first column and prints till the last column of that particular row
3. If there are more than say 100-200 characters of text then the Line comments will wrap to the next line
4. Maintain the size of the frame size (or display 10 lines per page)
I have already implemented 10 lines per page, which is not at all any issue, but in case there are line comments then it does not count that row. Also if the line comments wrap to 2 or more lines then it is still more complicated.
Does anyone have a solution to this issue. Also, if any of you have implemented this earlier, kindly let me know if you can share the template for reference.
Thanks and appreciate all your suggestions.

Hi,
Was anybody able to an answer to this issue? I have the same requirement where I have multiple subgroups under main group. To print a fixed number of lines in the template is causing an issue.
Thanks,
Sandeep

PDF form with line printer

Hi,
Is there a way to use PDF form with line printer? how, and the pros & cons. Currently we are using SPF to develop pdf form in sap, however it has limitation to print on line printer that we need to print on 3 ply form. The only option is to convert all PDF form to sap script.
If you have any ideas, please advise. Thanks.

Hi courtneyp58664902,
I would recommend you to follow the steps detailed on the page associated with this link (http://wwwimages.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-con vert-forms-into-fillable-pdf-c… ).
I would recommend you to Save the pdf with reader rights enabled [ File -> 'Save as other' -> 'Reader extender PDF' -> 'Enable More tools ( includes form fill-in and save)' ].
Please let me know if you face any challenges or need any further assistance.
Regards,
Rahul

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
"The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
"GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

Hi,
Search for routine FORM SORTFELDER_ERMITTELN
in SAPF150D.
Put a breakpoint in statement
ASSIGN (T047F-FELDN) TO <H1>.
in above routine and debug to the point where error is occuring.
Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
In that case, simply change the T047F-LENGT field accordingly in change mode.
Cheers,
Vikram
Edited by: Vikram Jalali on May 27, 2008 5:56 PM

I have a photosmart plus b210 e print and when I print with a black back ground I get lines

I have a photosmart plus b210 e print and when I print with a black back ground I get lines. What can I do to eliminate the
lines in the photo
Thank You

Hey appollus,
Do you get these lines only when printing with ePrint? If not, it sounds like a printhead issue. Here are the steps to fix the issue.
1. Go to the setup menu on the printers front screen.
2. Go to tools.
3. Go to clean printhead
You may need to do this a few times to completely remove the lines in the print.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Problem is occurring in docx format; it is not printing "New Line" character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.

Problem: Problem
is occurring in docx format; it is not printing “New Line” character in extracted txt using IFilter (offfiltx.dll) while with doc file IFilter (OffFilt.dll) is working fine.
Environment: -
Operating
System:
Windows XP SP2/7
Language:
C#
MS
Office Version: - MS Office 2007/2010/2013
Problem
Description: -
We
havedocx
file with new line character, and we are processing this file in IFilter for extracting text, and it is giving output with concatenation of lines.
Docx
file format (Sample.docx)
Test this music
Word processing
Testing docx file
Output:
- Test this music Word processing Testing docx file
Requirement:
- We
have requirement to get following text in particular format with New Line from docx because client is using docx format only.
Test this music
Word processing
Testing docx file
Attempt:
We have tried a lot after changing IFilter configuration,
but it is not giving required output. Then we saved same file in doc format (Sample.doc), which is giving required output.
Because it is application specific problem, kindly
assist to resolve issue on priority. We are sharing IFilter paths for extracting text for doc and docx.
Doc Filter Location: - %systemroot%\system32\OffFilt.dll
Docx Filter Location: - <Drive>:\PROGRA~1\COMMON~1\MICROS~1\Filters\offfiltx.dll
Code Snippet for setting property of filter
internal static IFilter LoadAndInitIFilter(string fileName, string extension)
            IFilter filter
= LoadIFilter(extension);
            if (filter
== null)
                return null;
            IPersistFile persistFile
= (filter as IPersistFile);
            if (persistFile
!= null)
persistFile.Load(fileName, 0);
                IFILTER_FLAGS flags;
                IFILTER_INIT iflags
=
                            IFILTER_INIT.CANON_HYPHENS
|
                            IFILTER_INIT.CANON_PARAGRAPHS
|
                            IFILTER_INIT.CANON_SPACES
|
                            IFILTER_INIT.APPLY_INDEX_ATTRIBUTES
|
                            IFILTER_INIT.HARD_LINE_BREAKS
|
                            IFILTER_INIT.FILTER_OWNED_VALUE_OK;
                if (filter.Init(iflags,
0, IntPtr.Zero, out flags)
==IFilterReturnCode.S_OK)
                    return filter;
            Marshal.ReleaseComObject(filter);
            return null;
Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we would be really
thankful.

Kindly
assist to resolve this issue and also let us know if any input is required.
For any help, we
would be really thankful.

Canon Pixma MX870 printing with horizontal lines

Recently my printer has begun printing with even horizontal lines across the whole page. I've tried cleaning and deep cleaning, but neither have fixed the problem. Attached is the print nozzle check pattern: http://i.imgur.com/JrLZWgN.jpg . You can see a line between all the letters, and especially on the first rectangle.All ink cartridges are at a decent level as well.
What can I do?

Hi Emilio,
Performing a print head alignment on the printer may eliminate the lines that are appearing on your printouts. To perform a print head alignment, please follow the steps located at the link below:
PIXMA MX870 Performing a Print Head Alignment
If the lines still appear after performing the alignments, please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printing with lines

Similar Messages

Maybe you are looking for