Printline coordinating

As of now I have this piece of code:
System.out.println("ACTIVE RULES: \t\t\t AVAILABLE COMMANDS: ");
                        int n = 25 - str.length();
                  String ws= " ";
                  String ws_new = "";
                  for (int j=0; j<n; j++){
                       ws_new = ws_new.concat(ws);
                  String value = comm.get(str);
                  System.out.println(str+ws_new+"\t"+value);
        }So fist this Act. Rules and Av. Commands is printed, with some tabs in between, and then below the corresponding stuff is printed, with the idea to create some table which displays it nice and clearly. That's where the for loop comes in, to let the right column of the table start at the same point all the time. So because the placing of the "value" depends on the length of "str" (length of "str" plus one tab), and I want the placing of value on the line to be independant of it, which it is now.
I find this 25-str.length() and the loop a bit exaggerated to fix this though and was just wondering if there is no more efficient way of doing it?
Not that it's really a performance issue or whatever, but I'm just wondering...
Edited by: Igor_Pavlove on Feb 14, 2008 6:11 AM

Hi,
Instead of a for loop you could try something like
while (ws_new.length() < 25) {
         //increase length of ws_new
}Also it might be more efficient if you use a StringBuffer rather than a String...
Just some ideas.

Similar Messages

  • Logical standby stuck at initializing SQL apply only coordinator process up

    Hi
    OS: solaris 5.10
    Hardware: sun sparc
    Oracle database: 11.2.0.1.0
    Primary database name: asadmin
    Standby database name: test
    I had been trying to convert a physical standby to logical standby database. Both the primary and standby reside on the same machine.
    The physical standby was created with a hot backup of primary.
    I had been following document id 278371.1 to convert the physical to logical standby and used the following steps:
    Relevant init parameters on primary:
    *.db_name='asadmin'
    *.db_unique_name='asadmin'
    *.log_archive_config='dg_config=(asadmin,test)'
    *.log_archive_dest_1='location=/u01/asadmin/archive valid_for=(all_logfiles,all_roles) db_unique_name=asadmin'
    *.log_archive_dest_2='SERVICE=test async valid_for=(online_logfiles,primary_role) db_unique_name=test'
    *.log_archive_dest_state_1='enable'
    *.log_archive_dest_state_2='enable'
    *.fal_client='asadmin'
    *.fal_server='test'
    *.remote_login_passwordfile='EXCLUSIVE'
    Relevant init parameters on standby database:
    *.db_name='test' -- Was asadmin before I renamed the DB during conversion to logical standby
    *.db_unique_name='test'
    *.log_archive_dest_1='location=/u01/test/archive valid_for=(all_logfiles,all_roles) db_unique_name=test'
    *.log_archive_dest_2='service=asadmin async valid_for=(online_logfiles,primary_role) db_unique_name=asadmin'
    *.log_archive_dest_state_1=enable
    *.log_archive_dest_state_2=defer
    *.remote_login_passwordfile='EXCLUSIVE'*.fal_server=test
    *.fal_client=asadmin
    Steps on primary:
    1) alter system set log_archive_dest_state_2=defer;
    2) shutdown immediate;
    3) Made sure that the physical standby has applied all of the redo sent to it following the shutdown.
    4) startup mount;
    5) ALTER DATABASE BACKUP CONTROLFILE to '/home/oracle/control01.ctl';
    6) ALTER SYSTEM ENABLE RESTRICTED SESSION;
    7) ALTER DATABASE OPEN;
    8) Verified that the supplemental logging is on.
    9) ALTER SYSTEM ARCHIVE LOG CURRENT;
    10) Checked for the checkpoint change no. at this point which is 72403818 and is present in archive log file 1_62_775102253.dbf
    11) EXECUTE DBMS_LOGSTDBY.BUILD;
    12) ALTER SYSTEM ARCHIVE LOG CURRENT;
    13) Checked for the archive log containing dictionary build which is 1_64_775102253.dbf
    14) ALTER SYSTEM DISABLE RESTRICTED SESSION;
    Details of archive logs and related checkpoint change nos:
    NAME FIRST_CHANGE# NEXT_CHANGE#
    /u01/asadmin/archive/1_61_775102253.dbf 72402901 72403817
    /u01/asadmin/archive/1_62_775102253.dbf 72403817 72404069
    /u01/asadmin/archive/1_63_775102253.dbf 72404069 72404211
    /u01/asadmin/archive/1_64_775102253.dbf 72404211 72405700
    Steps on standby:
    1) shutdown immediate;
    2) Copy the archivelog file 61(was created at primary after apply stopped at standby), 62(contains checkpoint no. 72403818), 63 and 64(contains dictionary build). Copy the backup controlfile from step 5 above to the controlfile location in standby init.
    3) startup mount;
    4) Rename all datafiles and redo log files (including standby redo log files) to the correct path on standby.
    5) alter database recover automatic from '/u01/test/archive' until change 72405700 using backup controlfile; -- This completed error-free
    6) alter database guard all; -- this completed error free
    7) alter database open resetlogs; -- this completed error free.
    8) nid target=sys/oracle12 dbname=test
    9) Changed the db_name in init file to new name test.
    10) Added a tempfile to temp tablespaces.
    11) ALTER DATABASE REGISTER LOGICAL LOGFILE '/u01/test/archive/1_61_775102253.dbf'; -- ORA-16225: Missing LogMiner session name for Streams
    12) ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL 72405700; -- This completed error free.
    Also enabled the log_archive_dest_state_2 on primary.
    After this output from some views:
    SQL> SELECT SESSION_ID, STATE FROM V$LOGSTDBY_STATE;
    SESSION_ID STATE
    1 INITIALIZING
    SQL> SELECT SID, SERIAL#, SPID, TYPE FROM V$LOGSTDBY_PROCESS;
    SID SERIAL# SPID TYPE
    587 22 15476 COORDINATOR
    SELECT PERCENT_DONE, COMMAND
    FROM V$LOGMNR_DICTIONARY_LOAD
    WHERE SESSION_ID = (SELECT SESSION_ID FROM V$LOGSTDBY_STATE);
    PERCENT_DONE
    COMMAND
    0
    SQL> SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
    TYPE HIGH_SCN STATUS
    COORDINATOR ORA-16111: log mining and apply setting up
    SQL> SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;
    APPLIED_SCN NEWEST_SCN
    72405700 72411501
    SELECT THREAD#, SEQUENCE#, FILE_NAME FROM DBA_LOGSTDBY_LOG L
    WHERE NEXT_CHANGE# NOT IN
    (SELECT FIRST_CHANGE# FROM DBA_LOGSTDBY_LOG WHERE L.THREAD# = THREAD#)
    ORDER BY THREAD#,SEQUENCE#;
    no rows selected
    SQL> SELECT EVENT_TIME, STATUS, EVENT
    FROM DBA_LOGSTDBY_EVENTS
    ORDER BY EVENT_TIMESTAMP, COMMIT_SCN; 2 3
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:00:50 ORA-16111: log mining and apply setting up
    14-FEB-12 02:00:50 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:20:11 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:20:39 ORA-16111: log mining and apply setting up
    14-FEB-12 02:20:39 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:54:15 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:57:38 ORA-16111: log mining and apply setting up
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:57:38 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 03:01:36 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 03:13:44 ORA-16111: log mining and apply setting up
    14-FEB-12 03:13:44 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 04:32:23 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:34:17 ORA-16111: log mining and apply setting up
    14-FEB-12 04:34:17 Apply LWM 72405699, HWM 72405699, SCN 72405699
    EVENT_TIME STATUS EVENT
    14-FEB-12 04:36:16 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:36:21 ORA-16111: log mining and apply setting up
    14-FEB-12 04:36:21 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 05:15:22 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 05:15:29 ORA-16111: log mining and apply setting up
    14-FEB-12 05:15:29 Apply LWM 72405699, HWM 72405699, SCN 72405699
    I also greped for lsp and lcr processes and found that lsp is up but do not see any lcr.
    The logs are getting transported to the archive destination on standby whenever they are archived on primary but are not getting applied to standby.
    Also in case the standby is down while a log is generated on primary it is not automatically transported to standby once the standby is up, means gap resolution is also not working.
    I see the following in alert log every time I try to restart the log apply, everything seems to be stuck at initialization.
    ALTER DATABASE START LOGICAL STANDBY APPLY (test)
    with optional part
    IMMEDIATE
    Attempt to start background Logical Standby process
    Tue Feb 14 05:15:28 2012
    LSP0 started with pid=28, OS id=23391
    Completed: alter database start logical standby apply immediate
    LOGMINER: Parameters summary for session# = 1
    LOGMINER: Number of processes = 3, Transaction Chunk Size = 201
    LOGMINER: Memory Size = 30M, Checkpoint interval = 150M
    LOGMINER: SpillScn 0, ResetLogScn 0
    -- NOTHING AFTER THIS

    Hello;
    I noticed some of your parameters seem to be wrong.
    fal_client - This is Obsolete in 11.2
    You have db_name='test' on the Standby, it should be 'asadmin'
    fal_server=test is set like this on the standby, it should be 'asadmin'
    I might consider changing VALID_FOR to this :
    VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)Would review 4.2 Step-by-Step Instructions for Creating a Logical Standby Database of Oracle Document E10700-02
    Document 278371.1 is showing its age in my humble opinion.
    -----Wait on this until you fix your parameters----------------------
    Try restarting the SQL Apply
    ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATEI don't see the parameter MAX_SERVERS, try setting it to 8 times the number of cores.
    Use these statements to trouble shoot :
    SELECT NAME, VALUE, UNIT FROM V$DATAGUARD_STATS;
    SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME LIKE ;TRANSACTIONS%';
    SELECT COUNT(1) AS IDLE_PREPARERS FROM V$LOGSTDBY_PROCESS WHERE
    TYPE = 'PREPERER' AND STATUS_CODE = 16166;Best Regards
    mseberg
    Edited by: mseberg on Feb 14, 2012 7:37 AM

  • Current server is the coordinator and transaction is not found

    Hi,
    We're using Weblogic 8.1 SP3. We have a single weblogic domain and 2 clusters in it. EAR1 is deployed in cluster 1 and EAR2 is deployed in cluster 2. EAR2 is compiled and created using j2ee.jar and not weblogic.jar.
    We have a MessageDrivenBean which is CMT / Required in EAR1 calls a BMT Stateless Session Bean in EAR2.
    A new transaction is begun in the BMT SB method and commit or rollback is called based on exception. A RuntimeException is thrown back to the MDB in case the transaction is rolled back in Bean Managed SB.
    Sometimes from the Bean Managed SB the following exception is thrown:
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably rolled back and forgotten already.
         at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
         at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
         at com.oakgrovesystems.reactor.frontDesk.EJBFrontDeskBean_1gq9kv_EOImpl_813_WLStub.handleRequest(Unknown Source)
         at com.oakgrovesystems.reactor.requests.ReactorRequest.send(ReactorRequest.java:212)
         at com.oakgrovesystems.reactor.client.EJBReactorProxy.sendRequest(EJBReactorProxy.java:44)
         at com.oakgrovesystems.reactor.client.AbstractReactorProxy.handleRequest(AbstractReactorProxy.java:52)
         at sun.reflect.GeneratedMethodAccessor153.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at tavant.bpm.client.proxy.DynamicFailoverReactorProxy.invoke(DynamicFailoverReactorProxy.java:84)
         at $Proxy11.handleRequest(Unknown Source)
         at tavant.bpm.client.ProcessHome.handleRequest(ProcessHome.java:298)
         at tavant.bpm.client.ProcessHome.startProcess(ProcessHome.java:87)
         at tavant.bpm.client.processor.CreateWorkflowInstance.startProcess(CreateWorkflowInstance.java:70)
         at tavant.bpm.client.processor.CreateWorkflowInstance.invoke(CreateWorkflowInstance.java:51)
         at tavant.bpm.ejb.AsynchronousProcessorMessageBean.onMessage(AsynchronousProcessorMessageBean.java:58)
         at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
         at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    This is not consistently reproducible though it happens when server is heavily loaded. When this exception occurs, the transaction in the BMT Session Bean is actually getting committed! The message gets redelivered from the MDB.
    What could be the problem?
    Regards
    Sandhya

    I'm seeing a similiar problem on our servers recently and thought I would add my problem as well. We are using Weblogic 8.1; don't know which SP is in production. We have an EAR file with an SB EJB that puts messages in a queue. The EAR is deployed in a cluster along with the queues. The errors below occurred in 3 of the 4 WLS instances in our cluster. This happened during a peak period and lasted for several seconds in Production.
    ###<Jul 1, 2005 11:18:12 AM EDT> <Warning> <RMI> <exsdxtxeax1x.prod.xxxx.xxx> <ems-04> <ExecuteThread: '12' for queue: 'web
    logic.kernel.Default'> <<WLS Kernel>> <> <BEA-080006> <Failed to associate the transaction context with the response while marshall
    ing an exception to the client:
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
    rolled back and forgotten already..
    javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
    rolled back and forgotten already.
    at weblogic.transaction.internal.TransactionManagerImpl.sendResponse(Ljava.lang.Object;)Ljava.lang.Object;(TransactionManag
    erImpl.java:1438)
    at weblogic.rmi.internal.BasicServerRef.associateTxContext(Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundRespo
    nse;)V(BasicServerRef.java:490)
    at weblogic.rmi.internal.BasicServerRef.postInvoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.sp
    i.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Throwable;)V(Optimized Method)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest;)V(Optimized Method)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread;)V(Optimized Method)
    at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Optimized Method)
    at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
    at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
    >

  • I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

    I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
    How many Apple IDs can I have per device?
    I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
    I may load apps under a school Apple ID and have users load their own apps under thier own ID.
    How many devices can have the same Apple ID?
    Can I use the same Apple ID on all the computers in a lab?
    Can I use the same Apple ID on all iPads for a particular grade level?
    Are the rules different for iOS devices and computers?
    I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
    Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
    To make my life easier, I'd like 200 devices to all use the same Apple ID.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

  • Procurement Coordinator received Authorization Error when creating Bid Inv

    Hi All,
            In SRM I have an issue Please help me in solving this. Please see below
                  Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit.  Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators.  This problem does not happen for Commodity Managers

    Hi
    Please do the following steps.
    When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (TA SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Problem: [Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.

    Hi Gurus,
    I have this problem in my MS SQL Server 2012 that is running in SQL Server 2008 R2 Enterprise 64 bit.. Not sure why... Here is the full details of the error:
    Microsoft OLE DB Provider for ODBC Drivers 80040E14
    [Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
    /Libraries/DBA/DBA.asa, line 717
    Line 717 is this:
    rs.open destTableName,,,,adCmdTable
    Full details of the code:
        'Field object used to iterate through each field of the rs
        dim rs, fld
        'call dbInitRS(rs)
        set rs = server.createobject("adodb.recordset")
        'On Error Resume Next
        'Open rs
        set rs.activeConnection = myConnection
        rs.cursorType = adOpenKeyset
        rs.lockType = adLockOptimistic
        'rs.open destTableName
        rs.open destTableName,,,,adCmdTable
        'if err.number <> 0 then
        '    goto HandleError
        'end if
        rs.addNew
    Any ideas how to solve this problem?
    Thanks

    Still does not work. I have allow MSDSTC in my firewall list.
    Hi dudskie,
    Have you try to use DTCTester or DTCPing to verify MSDTC functionality over the network? Please refer to the following article:
    Troubleshooting Problems with MSDTC:
    http://msdn.microsoft.com/en-us/library/aa561924.aspx
    Use the DTCTester utility to verify transaction support between two computers if SQL Server is installed on one of the computers. The DTCTester utility uses ODBC to verify transaction support against a SQL Server database. For more information about
    DTCTester see How to Use DTCTester Tool.
    Use DTCPing to verify transaction support between two computers if SQL Server is not installed on either computer. The DTCPing tool must be run on both the client and server computer and is a good alternative to the DTCTester utility when SQL Server
    is not installed on either computer. For more information about DTCPing, see
    How to troubleshoot MS DTC firewall issues.
    If you have any feedback on our support, please click
    here.
    Hope this helps.
    Regards,
    Elvis Long
    TechNet Community Support

  • HD partitions, keychain, filevault, time machine - coordinated setup

    Let me start by saying this question covers numerous individual components of OS X and how to set them up in a manner which makes sense. Thus I hope this is in the correct forum. This could be a very long question and perhaps beyond this forum. In this case, being directed to an additional online resource would also be helpful and appreciated.
    I am new to Mac and as yet have not started using keychain or filevault, but want to in the near future. As such, I don't really know what questions I need to ask to get it all setup the best way. Since the iMac is the main family computer it has four user accounts set up on it, only one being an administrator. I want to ensure that TM, KC, and FV, plus the partitions and user accounts, plus the MBP, are set up in a coordinated way.
    I will lay it all out:
    I have an iMac and a MBP, plus a new external HD and I want to start using it as a backup. I want to use Time Machine for this. I will need to upgrade my iMac to Leopard from Tiger but I was planning on doing that anyway.
    So once I have upgraded the OS, here are some of the questions which come to mind before I start:
    1) How do I set up the external HD so each user can only access their backup files. Obviously this isn't a problem on the iMac's internal HD but how does this translate when you go external?
    2) Does it need to be partitioned in order to do this? Are there any other advantages to partitioning it anyway, it is 1TB?
    3) How does setting up secure individual user account access impact TM? Can I just set up TM within each account to do scheduled backups of each users data?
    4) Does adding a second machine, the MBP, change any of the above? It already has Leopard on it but isn't used as the "main" machine. It too has different accounts etc. much like the iMac
    Perhaps I'm making this more complicated than it needs to be but I just want to make sure I don't set something up at the begnning which forces me down a road I don't want to go down later on.
    Hopefully this makes sense and thank you very much for any pointers.

    you have some misunderstanding about TM. it only need to be set up once per computer and it will back up the whole computer including all users. unix permssions will prevent one user from accessing TM backups of another user and you don't have to do anything at all about that one.
    If you want to use one TM drive with two computers you have two options.
    1. you can constantly switch the drive between two computers as you can not connect an external to two computers at once. This is a major pain in my opinion.
    2. you can get a Time Capsule and back up both computers wirelessly to that.
    Lastly let me urge not to use filevault unless you absolutely must. filevault can cause all kinds of issues and doesn't play nicely with many things in aprticular Time machine. you can't back up a filevaulted account to TM while you are logged in and you can't use TM to retrieve individual files from a TM backup of a filevaulted account while you are logged in.

  • How to determine the  Comp Cord / comp coordinator / Company Coordinator.

    Hi,
    In tcode pa30 i see there is Comp Cord field. so these are the HR persons right which use the three digits numbers.
    So my question is how to determine that the user/ pernr is comp cord?
    I want to create the fm and  pass user id as import and want to find out where this user is belongs to comp coordinator or not.
    i do see some entry in the T526 table but not sure, how it work.
    Regards
    Ali

    Hi Ali,
    Administrators and administrator groups are  configured via the following SPRO step:
    Personnel management - Personnel administration - Organizational data - Organizational assignment - Define adm group & define administrators.
    However, as far as I understood, you want to have a backward way.
    I mean, you want to know which of your employees are comp coordnator/administrator?
    Is it right?
    If yes, there is, unfortunately, no connection between employee master records and administrator records.
    Regards,
    Dilek

  • Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

    All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
    I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
    the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
    settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation.  The documentation takes me windows 2008 R2 which is different than 2012!
    Tired and trying to pick myself up off the floor!
    Greg
    Gman

    In general, DTC is not required for SQL 2012.  But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum.  They would be more likely to know those situations where FTC might be needed by SharePoint. 
    .:|:.:|:. tim

  • Error in Toplink 10.1.3 cache coordination using Websphere JMS

    I' am trying to setup Cache Coordination for Toplink 10.1.3 in Websphere 7 using Websphere's implementation of JMS. However I' am getting a NamingException
    when I try to lookup the Topic and TopicFactory from the JNDI tree. Admin Security is enabled in the server but not application security. I' am able to lookup
    the queues using InitialContext. Upgrading to Toplink 11 is not an option right now for us. Please help in finding out if anything is missing in my Toplink configuration.
    <?xml version="1.0" encoding="UTF-8"?>
    <toplink-sessions
         version="10g Release 3 (10.1.3.0.0)"
         xmlns:xsd="http://www.w3.org/2001/XMLSchema"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         <session xsi:type="server-session">
              <name>default</name>
              <remote-command>
                   <commands>
                        <cache-sync>true</cache-sync>
                   </commands>
                   <transport xsi:type="jms-topic-transport">
                        <topic-connection-factory-name>jms/jobtrax.TCF</topic-connection-factory-name>
                        <topic-name>jms/jobtrax.ToplinkTopic</topic-name>
                        <jndi-naming-service>
                             <url>corbaloc:rir:/NameServiceServerRoot</url>
                             <initial-context-factory-name>com.ibm.websphere.naming.WsnInitialContextFactory</initial-context-factory-name>
                        </jndi-naming-service>
                   </transport>
              </remote-command>
    <!--<event-listener-classes>
    <event-listener-class>com.pstechnology.eaf.persistence.toplink.PostBeginTransactionListener</event-listener-class>
    </event-listener-classes>
              -->
              <logging xsi:type="toplink-log">
                   <log-level>fine</log-level>
                   <logging-options>
                        <log-exception-stacktrace>true</log-exception-stacktrace>
                        <print-thread>true</print-thread>
                        <print-session>false</print-session>
                        <print-connection>false</print-connection>
                        <print-date>true</print-date>
                   </logging-options>
              </logging>
              <primary-project xsi:type="class">com.pstechnology.toplink.ToplinkProject</primary-project>
              <login xsi:type="database-login">
                   <platform-class>com.pstechnology.eaf.persistence.toplink.Oracle10Platform</platform-class>
                   <external-connection-pooling>true</external-connection-pooling>
                   <external-transaction-controller>false</external-transaction-controller>
                   <sequencing>
                        <default-sequence xsi:type="native-sequence">
                             <name>Default</name>
                        </default-sequence>
                   </sequencing>
                   <datasource>jdbc/jobtrax_job_datasource</datasource>
                   <bind-all-parameters>true</bind-all-parameters>
              </login>
         </session>
    </toplink-sessions>
    [2/17/11 16:22:10:696 EST] 00000018 SystemOut O [TopLink Warning]:
    2011.02.17 04:22:10.690--Thread(Thread[server.startup : 0,5,main])--Local
    Exception Stack:
    Exception [TOPLINK-22103] (Oracle TopLink - 10g Release 3 (10.1.3.0.0)
    (Build 060118)): oracle.toplink.exceptions.RemoteCommandManagerException
    Exception Description: Could not look up remote connection under name
    jms/jobtrax.TCF with URL corbaloc:rir:/NameServiceServerRoot
    Internal Exception: javax.naming.NamingException: Error during resolve
    [Root exception is javax.naming.AuthenticationException: Login failed:
    com.ibm.websphere.security.auth.WSLoginFailedException [Root exception is
    com.ibm.websphere.security.auth.WSLoginFailedException]]
    at
    oracle.toplink.exceptions.RemoteCommandManagerException.errorLookingUpRemoteConnection
    (RemoteCommandManagerException.java:75)
    at
    oracle.toplink.remotecommand.jms.JMSTopicTransportManager.getTopicConnectionFactory
    (JMSTopicTransportManager.java:206)
    at
    oracle.toplink.remotecommand.jms.PstJMSTopicTransportManager.createJMSTopicRemoteConnection
    (PstJMSTopicTransportManager.java:67)
    at
    oracle.toplink.remotecommand.jms.JMSTopicTransportManager.createLocalConnection
    (JMSTopicTransportManager.java:106)
    at
    oracle.toplink.remotecommand.jms.JMSTopicDiscoveryManager.startDiscovery
    (JMSTopicDiscoveryManager.java:44)
    at oracle.toplink.remotecommand.RemoteCommandManager.initialize
    (RemoteCommandManager.java:132)
    at oracle.toplink.publicinterface.DatabaseSession.login
    (DatabaseSession.java:517)
    at oracle.toplink.tools.sessionmanagement.SessionManager.getSession
    (SessionManager.java:379)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getServerSession
    (TopLinkRepository.java:163)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getClientSession
    (TopLinkRepository.java:198)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getReadSession
    (TopLinkRepository.java:216)
    at com.pstechnology.eaf.persistence.toplink.TopLinkRepository.read
    (TopLinkRepository.java:318)
    at
    com.pstechnology.repository.admin.ApplicationPropertyRepository.findApplicationPropertyByEnumId
    (ApplicationPropertyRepository.java:70)
    at
    com.pstechnology.service.admin.AdministrationService.findApplicationPropertyValue
    (AdministrationService.java:179)
    at
    com.pstechnology.scheduling.trigger.AbolishedTaskSimpleTrigger.getTimerRepeatIntervalValue
    (AbolishedTaskSimpleTrigger.java:45)
    at
    com.pstechnology.scheduling.trigger.AbolishedTaskSimpleTrigger.afterPropertiesSet
    (AbolishedTaskSimpleTrigger.java:30)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods
    (AbstractAutowireCapableBeanFactory.java:1198)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean
    (AbstractAutowireCapableBeanFactory.java:1167)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean
    (AbstractAutowireCapableBeanFactory.java:427)
    at org.springframework.beans.factory.support.AbstractBeanFactory
    $1.getObject(AbstractBeanFactory.java:249)
    at
    org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton
    (DefaultSingletonBeanRegistry.java:155)
    at
    org.springframework.beans.factory.support.AbstractBeanFactory.getBean
    (AbstractBeanFactory.java:246)
    at
    org.springframework.beans.factory.support.AbstractBeanFactory.getBean
    (AbstractBeanFactory.java:160)
    at
    org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons
    (DefaultListableBeanFactory.java:291)
    at
    org.springframework.context.support.AbstractApplicationContext.refresh
    (AbstractApplicationContext.java:352)
    at
    org.springframework.context.support.ClassPathXmlApplicationContext.<init>
    (ClassPathXmlApplicationContext.java:122)
    at
    org.springframework.context.support.ClassPathXmlApplicationContext.<init>
    (ClassPathXmlApplicationContext.java:66)
    at com.pstechnology.service.SchedulingContext.initialize
    (SchedulingContext.java:56)
    at com.pstechnology.servlet.InitializationServlet.init
    (InitializationServlet.java:52)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init
    (ServletWrapper.java:358)
    at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.init
    (ServletWrapperImpl.java:169)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize
    (ServletWrapper.java:1809)
    at
    com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper
    (WebExtensionProcessor.java:98)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings
    (WebApp.java:678)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinally
    (WebApp.java:429)
    at com.ibm.ws.webcontainer.webapp.WebAppImpl.initialize
    (WebAppImpl.java:304)
    at com.ibm.ws.webcontainer.webapp.WebGroupImpl.addWebApplication
    (WebGroupImpl.java:100)
    at com.ibm.ws.webcontainer.VirtualHostImpl.addWebApplication
    (VirtualHostImpl.java:166)
    at com.ibm.ws.webcontainer.WSWebContainer.addWebApp
    (WSWebContainer.java:731)
    at com.ibm.ws.webcontainer.WSWebContainer.addWebApplication
    (WSWebContainer.java:616)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install
    (WebContainerImpl.java:376)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start
    (WebContainerImpl.java:668)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start
    (ApplicationMgrImpl.java:1122)
    at
    com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart
    (DeployedApplicationImpl.java:1319)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start
    (DeployedModuleImpl.java:609)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start
    (DeployedApplicationImpl.java:944)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication
    (ApplicationMgrImpl.java:725)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start
    (ApplicationMgrImpl.java:2046)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.start
    (CompositionUnitMgrImpl.java:439)
    at com.ibm.ws.runtime.component.CompositionUnitImpl.start
    (CompositionUnitImpl.java:123)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.start
    (CompositionUnitMgrImpl.java:382)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.access$300
    (CompositionUnitMgrImpl.java:110)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl
    $CUInitializer.run(CompositionUnitMgrImpl.java:949)
    at com.ibm.wsspi.runtime.component.WsComponentImpl
    $_AsynchInitializer.run(WsComponentImpl.java:349)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1563)
    Internal Exception Stack:
    javax.naming.NamingException: Error during resolve [Root exception is
    javax.naming.AuthenticationException: Login failed:
    com.ibm.websphere.security.auth.WSLoginFailedException [Root exception is
    com.ibm.websphere.security.auth.WSLoginFailedException]]
    at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup
    (CNContextImpl.java:1840)
    at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup
    (CNContextImpl.java:1749)
    at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt
    (CNContextImpl.java:1500)
    at com.ibm.ws.naming.jndicos.CNContextImpl.lookup
    (CNContextImpl.java:637)
    at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:165)
    at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:179)
    at javax.naming.InitialContext.lookup(InitialContext.java:455)
    at
    oracle.toplink.remotecommand.jms.JMSTopicTransportManager.getTopicConnectionFactory
    (JMSTopicTransportManager.java:204)
    at
    oracle.toplink.remotecommand.jms.PstJMSTopicTransportManager.createJMSTopicRemoteConnection
    (PstJMSTopicTransportManager.java:67)
    at
    oracle.toplink.remotecommand.jms.JMSTopicTransportManager.createLocalConnection
    (JMSTopicTransportManager.java:106)
    at
    oracle.toplink.remotecommand.jms.JMSTopicDiscoveryManager.startDiscovery
    (JMSTopicDiscoveryManager.java:44)
    at oracle.toplink.remotecommand.RemoteCommandManager.initialize
    (RemoteCommandManager.java:132)
    at oracle.toplink.publicinterface.DatabaseSession.login
    (DatabaseSession.java:517)
    at oracle.toplink.tools.sessionmanagement.SessionManager.getSession
    (SessionManager.java:379)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getServerSession
    (TopLinkRepository.java:163)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getClientSession
    (TopLinkRepository.java:198)
    at
    com.pstechnology.eaf.persistence.toplink.TopLinkRepository.getReadSession
    (TopLinkRepository.java:216)
    at com.pstechnology.eaf.persistence.toplink.TopLinkRepository.read
    (TopLinkRepository.java:318)
    at
    com.pstechnology.repository.admin.ApplicationPropertyRepository.findApplicationPropertyByEnumId
    (ApplicationPropertyRepository.java:70)
    at
    com.pstechnology.service.admin.AdministrationService.findApplicationPropertyValue
    (AdministrationService.java:179)
    at
    com.pstechnology.scheduling.trigger.AbolishedTaskSimpleTrigger.getTimerRepeatIntervalValue
    (AbolishedTaskSimpleTrigger.java:45)
    at
    com.pstechnology.scheduling.trigger.AbolishedTaskSimpleTrigger.afterPropertiesSet
    (AbolishedTaskSimpleTrigger.java:30)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods
    (AbstractAutowireCapableBeanFactory.java:1198)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean
    (AbstractAutowireCapableBeanFactory.java:1167)
    at
    org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean
    (AbstractAutowireCapableBeanFactory.java:427)
    at org.springframework.beans.factory.support.AbstractBeanFactory
    $1.getObject(AbstractBeanFactory.java:249)
    at
    org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton
    (DefaultSingletonBeanRegistry.java:155)
    at
    org.springframework.beans.factory.support.AbstractBeanFactory.getBean
    (AbstractBeanFactory.java:246)
    at
    org.springframework.beans.factory.support.AbstractBeanFactory.getBean
    (AbstractBeanFactory.java:160)
    at
    org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons
    (DefaultListableBeanFactory.java:291)
    at
    org.springframework.context.support.AbstractApplicationContext.refresh
    (AbstractApplicationContext.java:352)
    at
    org.springframework.context.support.ClassPathXmlApplicationContext.<init>
    (ClassPathXmlApplicationContext.java:122)
    at
    org.springframework.context.support.ClassPathXmlApplicationContext.<init>
    (ClassPathXmlApplicationContext.java:66)
    at com.pstechnology.service.SchedulingContext.initialize
    (SchedulingContext.java:56)
    at com.pstechnology.servlet.InitializationServlet.init
    (InitializationServlet.java:52)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init
    (ServletWrapper.java:358)
    at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.init
    (ServletWrapperImpl.java:169)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize
    (ServletWrapper.java:1809)
    at
    com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper
    (WebExtensionProcessor.java:98)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings
    (WebApp.java:678)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinally
    (WebApp.java:429)
    at com.ibm.ws.webcontainer.webapp.WebAppImpl.initialize
    (WebAppImpl.java:304)
    at com.ibm.ws.webcontainer.webapp.WebGroupImpl.addWebApplication
    (WebGroupImpl.java:100)
    at com.ibm.ws.webcontainer.VirtualHostImpl.addWebApplication
    (VirtualHostImpl.java:166)
    at com.ibm.ws.webcontainer.WSWebContainer.addWebApp
    (WSWebContainer.java:731)
    at com.ibm.ws.webcontainer.WSWebContainer.addWebApplication
    (WSWebContainer.java:616)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install
    (WebContainerImpl.java:376)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start
    (WebContainerImpl.java:668)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start
    (ApplicationMgrImpl.java:1122)
    at
    com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart
    (DeployedApplicationImpl.java:1319)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start
    (DeployedModuleImpl.java:609)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start
    (DeployedApplicationImpl.java:944)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication
    (ApplicationMgrImpl.java:725)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start
    (ApplicationMgrImpl.java:2046)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.start
    (CompositionUnitMgrImpl.java:439)
    at com.ibm.ws.runtime.component.CompositionUnitImpl.start
    (CompositionUnitImpl.java:123)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.start
    (CompositionUnitMgrImpl.java:382)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl.access$300
    (CompositionUnitMgrImpl.java:110)
    at com.ibm.ws.runtime.component.CompositionUnitMgrImpl
    $CUInitializer.run(CompositionUnitMgrImpl.java:949)
    at com.ibm.wsspi.runtime.component.WsComponentImpl
    $_AsynchInitializer.run(WsComponentImpl.java:349)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1563)
    Caused by: javax.naming.AuthenticationException: Login failed:
    com.ibm.websphere.security.auth.WSLoginFailedException [Root exception is
    com.ibm.websphere.security.auth.WSLoginFailedException]
    at com.ibm.ws.naming.util.SecurityUtil.login(SecurityUtil.java:121)
    at com.ibm.ws.naming.jndicos.CNContextImpl.login
    (CNContextImpl.java:4516)
    at com.ibm.ws.naming.jndicos.CNContextImpl.cosResolve
    (CNContextImpl.java:2781)
    at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup
    (CNContextImpl.java:1790)
    ... 60 more
    Caused by: com.ibm.websphere.security.auth.WSLoginFailedException
    at com.ibm.ws.security.ltpa.LTPAServerObject.authenticate
    (LTPAServerObject.java:998)
    at com.ibm.ws.security.server.lm.ltpaLoginModule.login
    (ltpaLoginModule.java:643)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke
    (NativeMethodAccessorImpl.java:48)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke
    (DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at javax.security.auth.login.LoginContext.invoke
    (LoginContext.java:795)
    at javax.security.auth.login.LoginContext.access$000
    (LoginContext.java:209)
    at javax.security.auth.login.LoginContext$4.run
    (LoginContext.java:709)
    at java.security.AccessController.doPrivileged
    (AccessController.java:251)
    at javax.security.auth.login.LoginContext.invokePriv
    (LoginContext.java:706)
    at javax.security.auth.login.LoginContext.login
    (LoginContext.java:603)
    at com.ibm.ws.security.auth.JaasLoginHelper.jaas_login
    (JaasLoginHelper.java:354)
    at com.ibm.ws.security.auth.ContextManagerImpl.login
    (ContextManagerImpl.java:4024)
    at com.ibm.ws.security.auth.ContextManagerImpl.login
    (ContextManagerImpl.java:3728)
    at com.ibm.ws.security.auth.ContextManagerImpl.login
    (ContextManagerImpl.java:3724)
    at com.ibm.ws.security.auth.ContextManagerImpl.login
    (ContextManagerImpl.java:3475)
    at com.ibm.ws.naming.util.SecurityUtil$1.run(SecurityUtil.java:115)
    at com.ibm.ws.naming.util.SecurityUtil$1.run(SecurityUtil.java:111)
    at com.ibm.ws.security.util.AccessController.doPrivileged
    (AccessController.java:118)
    at com.ibm.ws.naming.util.SecurityUtil.login(SecurityUtil.java:109)
    ... 63 more
    Caused by: com.ibm.websphere.security.PasswordCheckFailedException
    at com.ibm.ws.wim.registry.util.LoginBridge.checkPassword
    (LoginBridge.java:204)
    at com.ibm.ws.wim.registry.WIMUserRegistry$1.run
    (WIMUserRegistry.java:181)
    at com.ibm.ws.security.auth.ContextManagerImpl.runAs
    (ContextManagerImpl.java:4610)
    at com.ibm.ws.security.auth.ContextManagerImpl.runAsSystem
    (ContextManagerImpl.java:4698)
    at
    com.ibm.ws.wim.security.authz.jacc.JACCSecurityManager.runAsSuperUser
    (JACCSecurityManager.java:432)
    at
    com.ibm.ws.wim.security.authz.ProfileSecurityManager.runAsSuperUser
    (ProfileSecurityManager.java:964)
    at com.ibm.ws.wim.registry.WIMUserRegistry.checkPassword
    (WIMUserRegistry.java:170)
    at com.ibm.ws.security.registry.UserRegistryImpl.checkPassword
    (UserRegistryImpl.java:338)
    at com.ibm.ws.security.ltpa.LTPAServerObject.authenticate
    (LTPAServerObject.java:973)
    ... 83 more
    Caused by: com.ibm.websphere.wim.exception.PasswordCheckFailedException:
    CWWIM4537E No principal is found from the 'admin' principal name.
    at com.ibm.ws.wim.ProfileManager.loginImpl(ProfileManager.java:3607)
    at com.ibm.ws.wim.ProfileManager.genericProfileManagerMethod
    (ProfileManager.java:292)
    at com.ibm.ws.wim.ProfileManager.login(ProfileManager.java:400)
    at com.ibm.websphere.wim.ServiceProvider.login
    (ServiceProvider.java:485)
    at com.ibm.ws.wim.registry.util.LoginBridge.checkPassword
    (LoginBridge.java:169)

    We are taking another run at TopLink 10.1.3 and have run into this problem again.
    It turns out that this is fairly reproducable. It occurs when we remove the last item (or all of the items) from the parent collection.
    It occurs with transparent indirection on or off.
    I've added several tests to our Junit suite to detect this behavior with various objects. Sometimes they fail, sometimes they pass. Going back to TopLink 9, a couple of the tests that fail in 10 fail, but most of them pass.
    Given the number of folks who shared our probem in TopLink9, I wonder how many have a similar problem in 10. I also wonder why the behavior differs somewhat between 9 and 10. Though our expanded test suite is now detecting the behavior in 9, it is less frequent.

  • TopLink 11g Cache Coordination failure in WebSphere 6.1

    Hello,
    I've recently upgraded to TopLink 11g and I am trying to make cache coordination feature work in WebSphere 6.1 using JMS. Once configured I am getting the following errors on the server side:
    [4/14/09 17:22:25:321 PDT] 00000032 SibMessage E [:] CWSIP0003E: An internal messaging error occurred Default.Topic.Space in com.ibm.ws.sib.processor.impl.LocalConsumerPoint, 1:1511:1.28, com.ibm.ws.sib.msgstore.ProtocolException: CWSIS1001E: The requested action could not be carried out as it does not comply with the resource manager's internal transaction protocol. at com.ibm.ws.sib.msgstore.transactions.MSDelegatingXAResource.addWork(MSDelegatingXAResource.java:140) at com.ibm.ws.sib.msgstore.cache.links.AbstractItemLink.cmdRemove(AbstractItemLink.java:1330) at com.ibm.ws.sib.msgstore.AbstractItem.remove(AbstractItem.java:828) at com.ibm.ws.sib.processor.impl.JSLocalConsumerPoint.receive(JSLocalConsumerPoint.java:1487) at com.ibm.ws.sib.processor.impl.ConsumerSessionImpl.receiveWithWait(ConsumerSessionImpl.java:421) at com.ibm.ws.sib.api.jms.impl.JmsMsgConsumerImpl.receiveInboundMessage(JmsMsgConsumerImpl.java:1525) at com.ibm.ws.sib.api.jms.impl.JmsMsgConsumerImpl.receive(JmsMsgConsumerImpl.java:707) at oracle.toplink.internal.remotecommand.jms.JMSTopicRemoteConnection.run(JMSTopicRemoteConnection.java:229) at java.lang.Thread.run(Thread.java:810)
    [4/14/09 17:22:25:353 PDT] 00000032 SystemOut O [TopLink Warning]: 2009.04.14 17:22:25.353--ServerSession(1261194028)--Thread(Thread[Thread-65,5,WebSphere_EJB_Timer_Service_WorkManager: WM Service Group])--Local Exception Stack:
    Exception [TOPLINK-22109] (Oracle TopLink - 11g (11.1.1.0.1) (Build 081030)): oracle.toplink.exceptions.RemoteCommandManagerException
    Exception Description: Failed to receive JMS message from JMS provider
    Internal Exception: javax.jms.JMSException: CWSIA0103E: An exception occurred while receiving a message: com.ibm.websphere.sib.exception.SIResourceException: CWSIP0003E: An internal messaging error occurred Default.Topic.Space in com.ibm.ws.sib.processor.impl.LocalConsumerPoint, 1:1526:1.28, com.ibm.ws.sib.msgstore.ProtocolException: CWSIS1001E: The requested action could not be carried out as it does not comply with the resource manager's internal transaction protocol..
         at oracle.toplink.exceptions.RemoteCommandManagerException.errorReceivingJMSMessage(RemoteCommandManagerException.java:139)
         at oracle.toplink.internal.remotecommand.jms.JMSTopicRemoteConnection.run(JMSTopicRemoteConnection.java:257)
         at java.lang.Thread.run(Thread.java:810)
    Caused by: javax.jms.JMSException: CWSIA0103E: An exception occurred while receiving a message: com.ibm.websphere.sib.exception.SIResourceException: CWSIP0003E: An internal messaging error occurred Default.Topic.Space in com.ibm.ws.sib.processor.impl.LocalConsumerPoint, 1:1526:1.28, com.ibm.ws.sib.msgstore.ProtocolException: CWSIS1001E: The requested action could not be carried out as it does not comply with the resource manager's internal transaction protocol..
         at com.ibm.ws.sib.api.jms.impl.JmsMsgConsumerImpl.receiveInboundMessage(JmsMsgConsumerImpl.java:1637)
         at com.ibm.ws.sib.api.jms.impl.JmsMsgConsumerImpl.receive(JmsMsgConsumerImpl.java:707)
         at oracle.toplink.internal.remotecommand.jms.JMSTopicRemoteConnection.run(JMSTopicRemoteConnection.java:229)
         ... 1 more
    Caused by: com.ibm.websphere.sib.exception.SIResourceException: CWSIP0003E: An internal messaging error occurred Default.Topic.Space in com.ibm.ws.sib.processor.impl.LocalConsumerPoint, 1:1526:1.28, com.ibm.ws.sib.msgstore.ProtocolException: CWSIS1001E: The requested action could not be carried out as it does not comply with the resource manager's internal transaction protocol.
         at com.ibm.ws.sib.processor.impl.JSLocalConsumerPoint.receive(JSLocalConsumerPoint.java:1521)
         at com.ibm.ws.sib.processor.impl.ConsumerSessionImpl.receiveWithWait(ConsumerSessionImpl.java:421)
         at com.ibm.ws.sib.api.jms.impl.JmsMsgConsumerImpl.receiveInboundMessage(JmsMsgConsumerImpl.java:1525)
         ... 3 more
    Caused by: com.ibm.ws.sib.msgstore.ProtocolException: CWSIS1001E: The requested action could not be carried out as it does not comply with the resource manager's internal transaction protocol.
         at com.ibm.ws.sib.msgstore.transactions.MSDelegatingXAResource.addWork(MSDelegatingXAResource.java:140)
         at com.ibm.ws.sib.msgstore.cache.links.AbstractItemLink.cmdRemove(AbstractItemLink.java:1330)
         at com.ibm.ws.sib.msgstore.AbstractItem.remove(AbstractItem.java:828)
         at com.ibm.ws.sib.processor.impl.JSLocalConsumerPoint.receive(JSLocalConsumerPoint.java:1487)
         ... 5 more
    Any idea what I am doing wrong here?
    Lukas

    Fixing listener is not enough. Old and lastest code has this for references to ServerPlatform.launchContainerRunnable, which WebSpherePlatform do not override:
    CommandPropagator:
    public void asynchronousPropagateCommand() {
    // The async logic is in the run() method
    rcm.logDebug("async_propagation", (Object[])null);
    this.rcm.getServerPlatform().launchContainerRunnable(this);
    public void propagateCommand(RemoteConnection conn) {
    Object[] arguments = { command.getClass().getName(), conn.getServiceId() };
    rcm.logDebug("propagate_command_to", arguments);
    try {
    // The result will be null on success, and an exception string on failure
    Object result = conn.executeCommand(command);
    if (result != null) {
    // An error occurred executing the remote command
    handleExceptionFromRemoteExecution(conn, (String)result);
    } catch (CommunicationException comEx) {
    // We got a comms exception.
    this.handleCommunicationException(conn, comEx);
    JMSTopicRemoteConnection:
    DiscoveryManager:
    public void startDiscovery() {
    if (rcm.isCommandProcessorASession()) {
    rcm.getCommandProcessor().processCommand(new ProfileDiscoveryStartedCommand());
    // Only start if we are currently stopped
    if (this.isDiscoveryStopped()) {
    this.rcm.getServerPlatform().launchContainerRunnable(this);
    JMSTopicTransportManager:
    public Hashtable getConnectionsToExternalServicesForCommandPropagation() {
    if(this.getConnectionsToExternalServices().isEmpty() && !this.rcm.isStopped()) {
    this.createExternalConnection();
    if(this.localConnection == null) {
    // It's a good time to create localConnection,
    // in a new thread - to return externalConnections promptly.
    this.rcm.getServerPlatform().launchContainerRunnable(new Runnable() {
    public void run() {
    try {
    createLocalConnection();
    } catch (RemoteCommandManagerException ex) {
    // Ignore exception - user had a chance to handle it in createLocalConnection method:
    // for instance to change host url and create a new local connection.
    return super.getConnectionsToExternalServicesForCommandPropagation();
    }

  • Distributed Transaction Coordinator not displaying remotely on a server core cluster node..

    We setup a server core single node cluster (W2012 R2).  The MS DTC is running, and the Distributed Transaction Coordinator firewall rules are enabled.  I can connect to the firewall rules and compmgmt.msc remotely for this server.  When
    I attempt to connect to the Component Services Management console with this server, the MS DTC object is not displayed.  Only the COM+ applications are displayed.   We've setup other server core instances with out clustering and DTC is displayed.

    Hi Steve,
    We just finished the local test and found this behavior is by design. It’s expected that we can’t see the DTC remotely from component services for a cluster node.
    In my lab, 2012R2 node3 is a single node cluster and has DTC role.

  • User [ anonymous ] is not authorized to invoke AckCommit on a Coordinator

    Hi All,
           While trying to commit a transaction from OSB proxy I am getting the below error. Can anybody faced this issue before. I am using OSB 10.3.1.  
    <Jul 8, 2013 2:47:36 PM GMT+05:30> <Error> <JTA> <server name> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1373275056354> <BEA-110493> <User [<anonymous>] is not authorized to invoke AckCommit on a Coordinator.>
         Suggestions are most welcome. Thanks in advance
    Regards,
    Path Finder

    The same issue. I don't even have disk E: on my mac
    CF10.
    The current user is not authorized to invoke this method.
    The error occurred inE:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc: line 48
    Called from E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/datasource.cfc: line 52
    Called from /Users/username/Sites/zzz/r8/app/Application.cfc: line 252
    Called from /Users/username/Sites/zzz/r8/app/Application.cfc: line 237
    Called from /Users/username/Sites/zzz/r8/app/Application.cfc: line 75
    -1 : Unable to display error's location in a CFML template.
    Server Details
    Server Product
    ColdFusion
    Version
    10,0,7,284568
    Tomcat Version
    7.0.23.0
    Edition
    Developer 
    Serial Number
    Developer 
    Operating System
    Mac OS X 
    OS Version
    10.8.3 
    Update Level
    /Applications/ColdFusion10/cfusion/lib/updates/chf10000009.jar 
    Adobe Driver Version
    4.1 (Build 0001) 
    JVM Details
    Java Version
    1.6.0_45 
    Java Vendor
    Apple Inc. 
    Java Vendor URL
    http://www.apple.com/
    Java Home
    /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home 

  • The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows.  Does anyone know how to get those buttons back

    The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari.  I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications.  Does anyone know how to get those buttons back?  I guess I could just switch betwen appliations, but I am used to doing it the other way.

    You're welcome 
    You had Safari in full screen mode.

  • Dispute Case-Coordinator

    Hi Guys,
    I know that the processor,person responsible and the coordinator need to be in the table usr02 so that a dispute case can be created, but in our present scenario we don't have the coordinators in SAP and I have stored them in a Z table.
    So I need to update the dispute case with the coordinator found in this Z table, I have played with the attribute profile idea but it doesn't solve my problem.
    Is there a solution where I can create a dispute case with the coordinator id from this Z table, I don't want to override the standard dispute case program.
    Thanks,
    Kumar.

    How do you want to use the co-ordinator field? Is your issue with reporting, or with something like workflow.
    You could create a Z Table, that has the user based on certain criteria, so Company Code, Customer type, Dispute reason code.
    You can put a dummy user in the co-ordinator field, but use the value in the Z table for reporting or workflow.

Maybe you are looking for