Privileges for SQLScript execution

Hi all,
i started with the 30 day trial of SAP HANA from cloudshare.
What i want to do is performing some table operations with the help of SQLscript.
So i created a new user, a new schema and two tables with data.
But when i try to activate my procedure after commiting, i get the following error:
Error creating procedure;insufficient privilege: Not authorized at ptime/query/checker/query_check.cc:2225
I read all the HANA documentation, but could not find the right way to set all required privileges.
So here is my question:
What i need to do to be able to execute procedures on my tables?
Thanks very much for your help.
Regards
Adam

Hi Krishna Tangudu,
thanks for the fast reply. When i try your statement i got the error:
"SAP DBTech JDBC: [258]: insufficient privilege: Not authorized "
I'm logged in as the SYSTEM user.
My procedure was developed in the development perspective of the HANA Studio.
Kind Regards,
Adam

Similar Messages

IPod Classic 80GB - "iTunes library cannot be saved you do not have enough access privileges for this operation" It says it has synced but it hasn't. Help please I am not very tech minded

iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.

See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock

HT1751 I am trying to backup my iTunes library onto an external hard drive but it won't complete due to 'insufficient privileges for some of the items'. Am I doing something wrong and is there a solution to this problem?

Hi All,
I am currently trying to backup my iTunes library onto an external hard drive so that I can copy it onto my new Macbook Pro. I have been following the steps posted on the Apple website however each time I get a dialogue box stating:
'The operation cannot be completed because you do not have sufficient privileges for some of the items'.
Is this because I have items that were bought under another persons iTunes account? If so, is there a solution to this problem? Or am I doing something completely wrong?
Thanks in advance,
Sbrooks19

Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820

What does this message mean, "The iPad cannot be synced. You do not have enough access privileges for this operation?"

I need some help syncing my iPad. I get a message about not having enough privileges for this operation. Any help would be appreciated.
Thanks,

It means you are using windows and the user agent stuff is messed up.
Try looking at permissions on the drive iTunes library is on.

HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

See:
iPhone - not enough access privileges: Apple Support Communities

How do i resolve my itunes from saying " The itunes application could not be opened. You do not have enough access privileges for this operation."

Everytime i click to go to my itunes, the message "The Itunes application could not be opened. You do not have enough access privileges for this operation." pops up. I have tried my best to fix it by adding another account to my computer and setting that one as the administator and mine as the regular user. When i did that the itunes worked on both, but when i changed my account back to administator and the other account to the regular user my account didnt work but the other one did. I also tried to uninstall and reinstall itunes. This message popped up when i tried to update the itunes to the newest one. And still it wont go away. Can someone help me please. Thanks!

Are you logged in with administrative rights? Did you check your security software settings? Troubleshooting security software issues

Help! "The iTunes application could not be opened. You do not have enough access privileges for this application"

I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
Thanks for any help!

have you seen this discussion ?

How to create files with read/write privileges for everyone?

I have two iMacs 7,1 (one with Snow Leopard and the other with Mountain Lion) in a local area wireless network.
I have shared the "documents" folder in the Snow Leopard iMac in order to have files available to the other iMac. The folder has read/write privileges for everyone.
When I create a new file in the shared "Documents" folder (for example a new Open office document, or a Keynote presentation) this file is by default "read/write" for the Administrator but only "read" for all the other users, so when I try to open it from the other iMac, I am informed that the file is "read only".
I can obviously change the privileges of the file in the information window, but I have to do on a file per file basis and this takes too long.
Is it possible to change settings in order to create files which are always "read/write" for everyone?
And, secondly, since I have several existing files whose privileges I should manually change one by one, is it possible to make global changes of their privileges?
Thanks in advance
Best regards

couple of different changes - 1st, if you want to share folders, doing your whole documents folder is not the best way. Since both your computers can handle AidDrop, that's what I would recommend - http://osxdaily.com/2011/11/14/how-to-use-airdrop-in-mac-os-x/ - as it create an instant Ad-Hoc network between the two computers and then let's it done.
A second possibility that may not be what you're looking for, is to use google drive or some similay cloud sharing app to sync the documents back and forth. both of these solutions will transfer the files well, but the airdrop may be simplest

How To Modify Privileges For APEX Objects Granted To PUBLIC?

I have searched this forum but couldn't any threads relating to this...
We have APEX 3.0.1 installed in some 10g (10.2.0.2) databases that host GIS data. I was informed by a GIS administrator that when using ESRI tool to search for data, the objects that belongs to FLOWS_030000 schema and ones that were granted to PUBLIC are shown. He would like to know if there is a way to hide these objects so they don't show up on the list? There are about 176 objects granted to public from the flows_030000 schema.
Could we establish a different security scheme that could accomplish the same thing? Maybe we need to create a new account and a role. Grant all of the privileges for flows_030000 to public to the new role. Then grant the role to the new account and the flow_files schema?
Our goal here is to make the flows_030000 objects hidden from the ESRI tools and still have APEX working properly.

If you look at the grants, you'll see that there are over 170 objects from the FLOWS_030000 granted to PUBLIC:
SQL> select count(*) from dba_tab_privs where owner= 'FLOWS_030000' and grantee = 'PUBLIC';
173
If we were go grant these privileges to a role, called APEX_APP_RU, and grant this role to APEX_PUBLIC_USER and any schemas an application is linked to (Workspace to Schema), would that be a workable solution?
The only problem I see right off hand that this might not work is that PUBLIC has synonyms created for the FLOWS_030000 objects. If we revoke the underlying privileges, because of the synonyms, this might not work.
SQL> select COUNT(*) from dba_synonyms where table_owner = 'FLOWS_030000' and owner = 'PUBLIC';
176
Does anyone else have any ideas?

I have a new PC and I am getting the message "The iTunes Library File cannot be saved. You do not have enough access privileges for this operation." I am the only one using this PC and I have Windows 7 Pro and have an administrator account. Help

Can anyone help me with this problem. ITunes message," The iTunes library file cannot be saved. You do not have enough access privileges for this operation." I have administrator account and transferred files from old PC. I downloaded new iTunes program on new PC. I synced my iPhone to new PC, no problem. I deleted old account after indicating shared files to new admin account. Can anyone help?

A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them!

I keep getting dialog box saying " The itunes Library file cannot be saved. You do not have enough access privileges for this operation" I am the only user on this computer and only one library! how do i change access privileges please?

hi I keep getting the dialog box " The iTunes Library file cannot be saved. You do not have enough access privileges for this operation"
How do i amend this as i only have one account and one library. I cannot save new work or delete duplicate files

A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them!

Can you please help me out the Info Cubes info for Budget Execution?????

Hi,
Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
Thanks in advance,
Andy

Take the memory card out of the camer and put it in a card reader. When it mounts on the desktop select it and try to change the name. However, that might make it incompatible with the camera. You'll just have to try and see.
OT

How to schedule a workflow for recurring executions: The solution

Scheduling a workflow for recurring execution has been long awaited in WFA, perhaps from 2.0 time. The following document shows how to get it done. I've also explained the logic behind it. It’s very simple to use, meets every requirement which one can have from a scheduler and of course highly flexible. Let's go!! The Real stuff. What is this? Is this actually a scheduler? No. This is actually a command in your workflow, but a special 'magical' command. This 'magical' command logic is built using the answers for the following questions: Can a workflow be scheduled for a delayed execution in a future time? Yes, but only one execution instance. If you want the next execution, execute the workflow again providing the same set of inputs and the execution date/time.During workflow execution, can a command inside a workflow get to know what is the name of the workflow? YesDuring workflow execution, can the command know what is the job execution id? YesIs there any programmatic interface available to know what are the user input provided or a particular job execution? YesCan a command inside a workflow trigger another workflow? Yes.Can a command inside the same workflow trigger itself? Absolutely yes. I've ticked all boxes needed to build such a solution. The solution is to make the workflow a smart workflow, so smart that it can schedule itself for the next execution. It no longer needs any other task scheduler to tigger it. WFA provides a large set of REST APIs for other 3rd part SW integration. But I also can make good use of these APIs to make smart workflows. I have always believed that WFA should not only be seen as a framework for automating Storage boxes or server, but just about any task( inside a computer of course) which is done manually. WFA is an awesome product indeed. So this is a command called "Workflow Scheduler" which you can put in your workflow as another command. Prerequisites: You need PowerShell 3.0 on your WFA server. I certainly could have done it for PoSH2.0 as well, but life for web interfaces using PowerShell is so much easier with Posh3.0. Posh3.0 is a big jump from 2.0. WFA is fully supported to work on Posh3.0. Its available by default in Win2012, Win2008 can be upgraded, Win2003 users can't use it. Add credentials of a WFA Admin/Architect in you WFA itself with Name/IP: localhost Match: ExactType: OtherName/IP: localhostUsername: <WFA Admin/Architect Username>Password: <User Password> 3. Minimum WFA version 2.2. This is only needed for Importing the dar. I've provided the command code in text too. The command code is the real deal. How to use it? If you have a workflow which you want for recurring executions, just add this command "Workflow Scheduler" in it. The command takes parameters for the workflow execution intervals. For example minsInterval for executing this workflow every x minutes, or daysInterval for executing the workflow etc.Now just like a normal workflow execution execute this workflow deciding what is the trigger time. Example: Suppose you want the execution every day at 10:00 PM.So provide daysInterval = 1 And execute the workflow for a delayed execution at 10:00 PM. You can pick the day to start as you wish. The workflow will execute at 10:00 PM and when this execution reaches our magical command "workflow scheduler", this command will trigger the same workflow with same set of inputs for the next execution at 10:00 PM tomorrow. And so on an so forth. I’ve attached a very simple example workflow here to help you understand. An Example of a workflow scheduled for recurring execution Daily at 11:30 PM starting 10-March-2015 How to stop/suspend this recurring execution? Easy. You just abort the next scheduled job execution in Execution=> Execution Status. The cycle will stop. How to resume it? Easy again. Just resume the same aborted job. The cycle restarts. Can I change the schedule execution time? Yes. After aborting the current execution, you can resume the same workflow at a new time. Execution interval can't be modified as you can't change the command parameters. But the recurring execution now can occur at a new time. Where or which position to place this “workflow scheduler” command in your workflow? At the beginning ? At the end? Or somewhere in the middle. This completely depends on your choice. See some below cases. You don't want the next job execution scheduling to happen if any of the commands in my current workflow execution fails: Put command “workflow scheduler” in the end. It will trigger the schedule of the next job execution only when all real original commands of your workflow have passed. else not. You want continuous job executions irrespective of the workflow command failures: Put it in the beginning. It will trigger the schedule for next execution before any of the actual command begin executing. You want an approval before the next execution job is scheduled: Add an approval point before the comamnd. So it’s all left to you. Can an operator decide the execution schedule? Yes, but which workflows will be available to him/her for this recurring execution will have to be decided by the designer. This is a good thing to have as it serves for access control in a way. The Architect/Admin can now restrict which workflow can be put for recurring executions. Operators can’t execute just any workflow available to him for automatic recurring execution. And the workflow designer can also choose which scheduling parameter is to be made a variable for the operator. For example the designer want the operator to schedule a given workflow only for weeks Interval and not months or days i.e. he/she can only chose to schedule for weekly, biweekly etc. executions and nothing else. For this the designer can define a User-Input variable only for weeksInterval parameter. It’s Done. You want workflow execution to be scheduled either for daily or once in 2 days but not any other. You can restrict this. Or he/she wants to give full freedom to the operator make his/her own decision about scheduling, he defined user-input variable for all scheduling parameters. The workflow designer wants weekly schedule but the day should not be a weekday: You can even do this. Is this flexible enough for my requirements? I’ve attached the very command code. You can modify the command as per your requirements. Suppose you want daily execution of a certain workflow at 10:00 PM but skip a day of execution if the day is a Monday. Modify the code check for the day and add another day if it’s a Monday. Its posh code and highly readable. So you can see how this can be used in a variety of ways. This is the beauty of a programmatic solution. Its highly flexible, it allows users to design solution based on their requirements. Flexibility is the heart & soul of WFA. Thats why I like it. I have a workflow but I don't want to modify it by adding a new command in it. Can I still use this solution? Yes but with WFA 3.0 on wards. WFA3.0 allows to create modular workflows. Create a parent workflow with you actual workflow as a child workflow in it. Add our “workflow scheduler” command too. So now you don't need to touch your existing workflow. I've attached a workflow example here. Have fun!! sinhaa

Providing a new version 1.1.0 of the command "WFA Schedular" Changes made: Added conditional String Representation based on the Scheduling parameter provided. Provided check for the right number of parameters passed into the command.Added a new parameter "Expiry Date" to automatically stop the recurring execution upon expiry.Check for Posh3.0 version in code.Have Fun!! sinhaa Below example for:Schedule a workflow for recurring execution every alternate day i.e. once in 2 days at 10:30 PM starting 06-Jul-2015 (Today's date is 02-Jul-2015) . The recurring workflow execution should expire on 31-Dec-2015 and stop.

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

Access privileges for Podcasts with VIsta

I'm having problems when attempting to "get" Podcasts that I've subscribed to. The error message states " There was a problem downloading 'name of podcast'. You do not have enough access privileges for this operation". These are all free podcasts, not requiring account set up or anything other than subcribing.
This only happens on my Wintel machine running Vista--on the Mac side I'm able to get the same episodes without a hitch. I've dug through the defender and administrator settings, but haven't found the solution.
Anyone know how to fix this?

Have you tried using Disk Utility's Repair
Permissions function?
Just tried. Both the "Verify..." and "Repair..."
buttons are greyed out.
Also, I noticed that, in this same Disk Utility
window, that next to "Owners Enabled:" it says "NO".
Is this part of the problem...that the Mac doesn't
see the iPod as "owned" by anyone? For what it's
worth, when I "Get Info" on the iPod, the user (my
wife) shows up, and is shown as being able to Read &
Write. So, according to that, it seems that someone
does "own" it.
Still baffled, but thanks for the tip, 0Ari0. We
might be getting somewhere...?
Yeah... it seems like YOU'RE not the owner...

Privileges for SQLScript execution

Similar Messages

Maybe you are looking for