Pro*C program fails in Oracle 11g enviroment.
Hi,
Right now we have oracle 10g environment in production and Pro*C program compilation and execution works fine.
We are upgrading Oracle 10g to Oracle 11g.
When I test the Pro*C program compilation and execution in Oracle 11g environment, the compilation works fine, but the execution fails with following error messgae,
ld.so.1: test_proc_pgm: fatal: libclntsh.so.11.1: open failed: No such file or directory
I have verified the LD_LIBRARY_PATH in unix machine where we call the test_proc_pgm, LD_LIBRARY_PATH contains the following libraries..
u02/oracle/product/11.2.0.3/lib:/lib:
Please advise.
Thanks and Regards
This forum is about general programming in C, C++ and Fortran, and about details of using the Solaris Studio suite of compilers and programming tools.
Questions about Oracle database programming are more likely to get an answer in a database programming forum. A list of forums is here:
https://forums.oracle.com/forums/category.jspa?categoryID=18
Similar Messages
-
Importing a dump fails on Oracle 11g
Hi
I am trying to import a dump which was created from Oracle 10g version 10.2.0.3 TO Oracle 11g Release 11.1.0.6.0
Issue 1)
The command i am using is
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world file=dmpersist.dmp full=y ignore=y
This command works fine on Oralce 10g(if i try to import the file to Oracle 10g) but fails on Oralce 11g with following error
"Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by SYS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses UTF8 character set (possible charset conversion)
. importing SYS's objects into DMUSER_02
. importing DMPERSIST's objects into DMPERSIST
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist"
Issue 2)
If i use following command
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world file=dmpersist.dmp fromuser=SYS touser=dmuser_02 ignore=y
I get error
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses UTF8 character set (possible charset conversion)
Import terminated successfully without warnings.
Any info/pointers/help
from
nayeemIssue 1)
The command i am using is
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world
file=dmpersist.dmp full=y ignore=y
. importing DMPERSIST's objects into DMPERSIST
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist"Make sure user DMPERSIST exists. Oracle will not create user for you because it looks like this dump file is not from full expor but a schema level export.
>
Issue 2)
If i use following command
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world
file=dmpersist.dmp fromuser=SYS touser=dmuser_02
ignore=y
I get error
import done in US7ASCII character set and UTF8
NCHAR character set
import server uses UTF8 character set (possible
charset conversion)
Import terminated successfully without warnings.
No issue here. The message looks totally normal. -
OCI calls failing for Oracle 11g 11.1.0.7 (64 bit)
Hi,
I have a 32bit app which we build and compile in a 32 bit OS, we then deploy this in a 64 bit Windows 2008 R1 machine which has a 11g 64 bit DB;
when the code make the OCI calls the app terminates.On debugging we found out that its failing to make OCI calls on the connect() method of a .cpp file.
This connect code is a custom wrapper class created for OCI which only accepts a complete SQL statement mainly used for looking after rollback segments, etc.
The code runs perfectly fine when we internally call the ORACMD of sqlplus and directly execute the sql from a script.
It only fails when our code tries to connect to the DB and make OCI calls.
I have also installed a 32 bit Oracle 11g Client 11.1.0.7 since I am using a 32 bit app.
Is there any compatibility issues between these 2 versions or the dll's?
Why is it failing while making OCI calls and is there any resolution?
My machine and setup details:
OS: Windows 2008 R1
DB : Oracle 11g R1 11.1.0.7 (64 bit)
Client: Oracle 11g R1 11.1.0.7 (32 bit)
Our App: 32 bit
ORACLE_HOME = // this is pointing to the 64 bit DB
I tried pointing the oracle_home to the client still no go.
Any suggestions on this will be appreciated.
Regards
Royuser13376823 wrote:
how do i find that my database is using big file tablespace management or not ?
SQL> select TABLESPACE_NAME,BIGFILE from dba_tablespaces;
TABLESPACE_NAME BIG
SYSTEM NO
UNDOTBS1 NO
SYSAUX NO
USERS NO
UNDOTBS2 NO
TEMP1 NO
TEMP3 NO
TEMP2 NO
8 rows selected.For tablespaces with smallfile datafile maximun datafile size is 32GB, where as bigfile datafile size is 8 exabytes. -
Dbconsole start failed on Oracle 11G
After installing Oracle 11G and creating a new database, I have created new db console reporsitory, with the commands:
set ORACLE_SID
set ORACLE_HOME
set SYS_PWD
set PORT
emca -repos create -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
emca -config dbcontrol db -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
At the end, the command fails:
INFO: This operation is being logged at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log.
Sep 22, 2008 10:26:41 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Sep 22, 2008 10:26:44 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Sep 22, 2008 10:27:13 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /exec/products/oracle/v11.1.0/bin/emctl start dbconsole
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
Could not complete the configuration. Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
When I want to start dbconsole manually, I have the following error:
emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://RD_x3650_22:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/log
The logs give the following message:
emdctl.trc:
2008-09-23 00:19:32 Thread-3083821984 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Open wallet failed, ret = 28750
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: nmehlenv_openWallet failed
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Error initializing SSL
2008-09-23 00:19:32 Thread-3083813792 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR main: nmectla_agentctl: Error connecting to https://RD_x3650_22:3872/emd/main. Returning status code 1
emoms.trc:
2008-09-22 23:07:08,275 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendClusterIntegration
2008-09-22 23:07:08,276 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNodeIntegration
2008-09-22 23:07:08,277 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.common.ui.intg.ProvCommonIntegration
emagent.log:
2008-09-22 23:06:59 Thread-3083801408 EMAgent started successfully (00702)
2008-09-22 23:14:56 Thread-3083817792 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-22 23:14:57 Thread-3083817792 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:58 Thread-3083817792 EMAgent started successfully (00702)
2008-09-23 00:14:00 Thread-3083813696 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-23 00:14:01 Thread-3083813696 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:03 Thread-3083813696 EMAgent started successfully (00702)
I've tried this:
- set correctly TIMEZONE,
- configure secure dbconsole (emctl secure dbconsole),
- stop service nscd,
- change the port number,
- recreate the repository....
But the problem still occurs...
Has someone another idea?
Thank You
Anneemctl secure agent does not exist with Oracle 11G
I tried:
emctl secure dbconsoleOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
[https://RD_x3650_22:5500/em/console/aboutApplication|https://rd_x3650_22:5500/em/console/aboutApplication]
Please enter repository password:
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Securing dbconsole... Sucessful.
But the dbconsole starting still have errors
The command status gives:
emctl status agent -secureOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3938.
Checking the security status of the OMS at [http://RD_x3650_22:5500/em/upload/..|http://rd_x3650_22:5500/em/]. Done.
OMS is running but has not been secured. No HTTPS Port available.
And the command "emctl ssl off" does nots exist with Oracle 11G
Anne -
RMAN backup is getting failed after oracle 11g upgarde (11.2.0.2)
Hi Basis Expert,
We have done oracle 11g ugrade (11.2.0.2) in our Dev BI system.
But after the upgrade the RMAN backup is failing. The backup use to work fine when we were on 10g (10.2.0.4).
Has anyone face this issue earlier.
Appreciate your help.
Regards,
Anil ShenoyHello Anil,
Syntax is -
ln -s /path/to/original/ /path/to/linkName
Output will be -
linkName --> original
In your case, 112_64 is the link name according to above SAP Note and 11202 is the original/physical path. So, the command should be -
ln -s /oracle/<DBSID>/11202 /oracle/<DBSID>/112_64
And the Result should be, 112_64 --> 11202 (in short)
So, I think you should change the existing link, 11202->112_64
Thanks -
Environment variable path failed in oracle 11g installation
hi all,
i am reinstalling oracel 11g in my window 7 64 bit machine after i uninstalled it. however, i got an issue that is environment variable path failed in the installation process. this didn't happen when i firstly successfully installed oracle. how can i fix the issue? thanks in advance.
regards,
honguser571093 wrote:
hi,
the problem is i uninstalled oracle 11g in my windows 7 64 bit machine and then try to install it on my machine. during the prerequisite check stage, an error message popped up like this:
environment variable: "PATH" failed
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length. (more details)
Expected Value
: 1023
Actual Value
: 1433
so, what is the reason caused this problem and how to fix it. thanks in advance.
hongI believe the error message is self-explanatory - assuming you you using a supported database and OS combination (which are unknown)
environment variable: "PATH" failed+
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.+
Expected Value+
*: 1023*
Actual Value+
*: 1433*
Your PATH variable exceeds the limit of 1023 characters
HTH
Srini -
Hi,I can't get the "OK" when I used the "tnsping" command,and I got the failed information as follows,so I need your help ,thanks a lot!
C:\>tnsping orcl.am.mot.com
TNS Ping Utility for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUL-
010 12:59:30
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora
TNS-03505: Failed to resolve nametnsping orcl.am.mot.com
TNS-03505: Failed to resolve name
I think the error message is pretty clear.
See the D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora file which source is used for resolution (It is configured by NAMES.DIRECTORY_PATH variable and the value is typically TNSNAMES). If so then you are probably missing entry in your tnsname.ora file which is located (by default) in $ORACLE_HOME/network/admin directory, so in your case it would be: D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora
For more information refer to documentation:
http://download.oracle.com/docs/cd/E11882_01/network.112/e10835/tnsnames.htm#NETRF007 -
Deinstall Failed Oracle 11g 32-bit installation
I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?
user13515882 wrote:
I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?open Command Window & execute the BAT file from there -
Problem with Application Login after upgrading to Oracle 11g
I have a home-grown application with Oracle 10g database running under Windows XP Pro. Recently, I installed Oracle 11g and imported the application database from 10g to 11g (still want to keep the 10g running for a while). However, I now having problem with the application logging into the new 11g database. (Keep getting invalid user/name message).
BTW, I have no problem accessing the 11g database through SQLPlus (logging in with the same name and password that I use for the application), and the connection test of NetManager (again using the same name and password that I use for the application) was successful.
The application itself uses the old Borland BDE (Borland Database Engine) to access the 10g and 11g database. Testing confirms that BDE can access Oracle 11g with no problems.
Any idea about the probable cause(s) of the problem?
Thanks in advance,
sg200011g by default is case sensitive username/password.
You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE; -
Oracle 11g memory_target best practices
Hi expert.
I'll use memory_target in my oracle 11g enviroment. There is a best practices, or formula, for to choose my memory_target?
There is a memory_target limit? (for example 128gb)
Many thanksThanks for the replies.
I could like know if there are some criteria, or formula, to a correct memory_target set.
I'm reading the file OracleOLTPonDellEqualLogicPS60x0.pdf
>
http://www.google.com/url?sa=t&source=web&cd=1&ved=0CBQQFjAA&url=http%3A%2F%2Fwww.delltechcenter.com%2Fpage%2FSizing%2Band%2BBest%2BPractices%2Bfor%2BOracle%2B11g%2BOLTP%2Bon%2BEqualLogic&rct=j&q=OracleOLTPonDellEqualLogicPS60x0.pdf&ei=7av3TPP_J4yb4Ab_7pnzBg&usg=AFQjCNF9PfDrIP-VkYq_v3qPx03UAdkF9Q&sig2=pAF4A7E-S_FJkQ8jxsiWmw&cad=rja
>
that explain the best practices for an Oracle RAC 11g on Dell Server. About the Tuning Parameter I don't undestand very well what's the criteria for to choose the MEMORY_TARGET between 32,40 or 48GB
Maybe choose what's the correct memory value for my server? I've an machine with X gb of RAM that I can allocate for an oracle istance. There is a fisical limit MEMORY_TARGET?
Thanks for all suggest.
Cheers,
Lain -
I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
a) SQL Server Database Engine service (sqlDbSrv2):
setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/ -
TNS-03505:Failed to resolve name in oracle 11g.
i install oracle 11g client in my pc.i want to connect to the server i also used and install Toad Tools. i have server ip address.192.168.1.162 and userid and password and port number-1521
when i connect to the toad and its make error like that
ORA-12541TNS- no listener.
and this is my tnsnames.ora file ,
# tnsnames.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ERP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = IT-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = erp)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =IT-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
mlmdb =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.8.162)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mlmdb)
and i want to connect mlmdb from server.
and this is my listner.ora file
# listener.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\IT\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\IT\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST =IT-PC)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\IT
and this is my sqlnet.ora file
# sqlnet.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
when i connect form the run--cmd--tnsping mlmdb
its make error likes this
TNS-03505 : failed to resolve name ,
can anyone help me how can i find this solution
thanks in advance.904803 wrote:
i install oracle 11g client in my pc.i want to connect to the server i also used and install Toad Tools. i have server ip address.192.168.1.162 and userid and password and port number-1521
when i connect to the toad and its make error like that
ORA-12541TNS- no listener.
and this is my tnsnames.ora file ,
# tnsnames.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ERP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = IT-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = erp)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =IT-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
mlmdb =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.8.162)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mlmdb)
and i want to connect mlmdb from server.
and this is my listner.ora file
# listener.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\IT\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\IT\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST =IT-PC)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\IT
and this is my sqlnet.ora file
# sqlnet.ora Network Configuration File: E:\app\IT\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
when i connect form the run--cmd--tnsping mlmdb
its make error likes this
TNS-03505 : failed to resolve name ,
can anyone help me how can i find this solution
thanks in advance.looks like listener is not running on the database server you are trying to connect to *(ORA-12541TNS- no listener)*. even though you have configured both tnsnames and lisnterner.ora files, you have to start listener for clients to make connections to db. hope this helps. set your oracle home and then type as below. these commands are very simple and I don't think I need to explain them.
cmd> lsnrctl status
cmd> lsnrctl start
cmd> lsnrctl stop -
Oracle 11g: cluvfy failed
Hi expert,
i'm trying to install Oracle 11g RAC.
I don't know why I have an failed in the cluvfy step. Can someone help me?
[oracle@rac1 bin]$ ./cluvfy stage -pre crsinst -n rac1,rac2 -verbose
WARNING:
Could not access or create trace file path "/mnt/OracleRAC/cvupack/bin/../cv/log". Trace information could not be collected
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
rac1
Verification will proceed with nodes:
rac2
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
rac2 passed
Verification of the hosts config file successful
Interface information for node "rac2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 192.168.2.102 192.168.2.0 0.0.0.0 192.168.2.1 08:00:27:4A:67:8E 1500
eth1 192.168.0.102 192.168.0.0 0.0.0.0 192.168.2.1 08:00:27:27:C4:33 1500
Check: Node connectivity of subnet "192.168.2.0"
Result: Node connectivity passed for subnet "192.168.2.0" with node(s) rac2
Check: TCP connectivity of subnet "192.168.2.0"
Source Destination Connected?
rac1:127.0.0.1 rac2:192.168.2.102 failed
Result: TCP connectivity check failed for subnet "192.168.2.0"
Check: Node connectivity of subnet "192.168.0.0"
Result: Node connectivity passed for subnet "192.168.0.0" with node(s) rac2
Check: TCP connectivity of subnet "192.168.0.0"
Source Destination Connected?
rac1:127.0.0.1 rac2:192.168.0.102 failed
Result: TCP connectivity check failed for subnet "192.168.0.0"
Interfaces found on subnet "192.168.2.0" that are likely candidates for VIP are:
rac2 eth0:192.168.2.102
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect are:
rac2 eth1:192.168.0.102
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
rac2 1.9642GB (2059580.0KB) 1.5GB (1572864.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
rac2 1.7729GB (1858984.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
rac2 3.9062GB (4095992.0KB) 2.9463GB (3089370.0KB) passed
Result: Swap space check passed
Check: Free disk space for "rac2:/tmp"
Path Node Name Mount point Available Required Comment
/tmp rac2 / 1.0762GB 1GB passed
Result: Free disk space check passed for "rac2:/tmp"
Check: User existence for "oracle"
Node Name Status Comment
rac2 exists(1100) passed
Checking for multiple users with UID value 1100
Result: Check for multiple users with UID value 1100 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
rac2 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
rac2 yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
rac2 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
rac2 hard 65536 65536 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
rac2 soft 1024 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
rac2 hard 16384 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
rac2 soft 2047 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
rac2 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.18-194.el5 2.6.18 passed
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Configured Required Comment
rac2 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Configured Required Comment
rac2 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Configured Required Comment
rac2 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Configured Required Comment
rac2 128 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
rac2 1054504960 536870912 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
rac2 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Configured Required Comment
rac2 2097152 2097152 passed
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Configured Required Comment
rac2 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Configured Required Comment
rac2 between 9000 & 65500 between 9000 & 65500 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Configured Required Comment
rac2 262144 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Configured Required Comment
rac2 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Configured Required Comment
rac2 262144 262144 passed
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Configured Required Comment
rac2 1048586 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Configured Required Comment
rac2 1048576 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "make-3.81"
Node Name Available Required Comment
rac2 make-3.81-3.el5 make-3.81 passed
Result: Package existence check passed for "make-3.81"
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Available Required Comment
rac2 binutils-2.17.50.0.6-14.el5 binutils-2.17.50.0.6 passed
Result: Package existence check passed for "binutils-2.17.50.0.6"
Check: Package existence for "gcc-4.1.2"
Node Name Available Required Comment
rac2 gcc-4.1.2-48.el5 gcc-4.1.2 passed
Result: Package existence check passed for "gcc-4.1.2"
Check: Package existence for "libaio-0.3.106 (i386)"
Node Name Available Required Comment
rac2 libaio-0.3.106-5 (i386) libaio-0.3.106 (i386) passed
Result: Package existence check passed for "libaio-0.3.106 (i386)"
Check: Package existence for "libaio-0.3.106 (x86_64)"
Node Name Available Required Comment
rac2 libaio-0.3.106-5 (x86_64) libaio-0.3.106 (x86_64) passed
Result: Package existence check passed for "libaio-0.3.106 (x86_64)"
Check: Package existence for "glibc-2.5-24 (i686)"
Node Name Available Required Comment
rac2 glibc-2.5-49 (i686) glibc-2.5-24 (i686) passed
Result: Package existence check passed for "glibc-2.5-24 (i686)"
Check: Package existence for "glibc-2.5-24 (x86_64)"
Node Name Available Required Comment
rac2 glibc-2.5-49 (x86_64) glibc-2.5-24 (x86_64) passed
Result: Package existence check passed for "glibc-2.5-24 (x86_64)"
Check: Package existence for "compat-libstdc++-33-3.2.3 (i386)"
Node Name Available Required Comment
rac2 compat-libstdc++-33-3.2.3-61 (i386) compat-libstdc++-33-3.2.3 (i386) passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3 (i386)"
Check: Package existence for "compat-libstdc++-33-3.2.3 (x86_64)"
Node Name Available Required Comment
rac2 compat-libstdc++-33-3.2.3-61 (x86_64) compat-libstdc++-33-3.2.3 (x86_64) passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"
Check: Package existence for "elfutils-libelf-0.125 (x86_64)"
Node Name Available Required Comment
rac2 elfutils-libelf-0.137-3.el5 (x86_64) elfutils-libelf-0.125 (x86_64) passed
Result: Package existence check passed for "elfutils-libelf-0.125 (x86_64)"
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Available Required Comment
rac2 elfutils-libelf-devel-0.137-3.el5 elfutils-libelf-devel-0.125 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125"
Check: Package existence for "glibc-common-2.5"
Node Name Available Required Comment
rac2 glibc-common-2.5-49 glibc-common-2.5 passed
Result: Package existence check passed for "glibc-common-2.5"
Check: Package existence for "glibc-devel-2.5 (i386)"
Node Name Available Required Comment
rac2 glibc-devel-2.5-49 (i386) glibc-devel-2.5 (i386) passed
Result: Package existence check passed for "glibc-devel-2.5 (i386)"
Check: Package existence for "glibc-devel-2.5 (x86_64)"
Node Name Available Required Comment
rac2 glibc-devel-2.5-49 (x86_64) glibc-devel-2.5 (x86_64) passed
Result: Package existence check passed for "glibc-devel-2.5 (x86_64)"
Check: Package existence for "glibc-headers-2.5"
Node Name Available Required Comment
rac2 glibc-headers-2.5-49 glibc-headers-2.5 passed
Result: Package existence check passed for "glibc-headers-2.5"
Check: Package existence for "gcc-c++-4.1.2"
Node Name Available Required Comment
rac2 gcc-c++-4.1.2-48.el5 gcc-c++-4.1.2 passed
Result: Package existence check passed for "gcc-c++-4.1.2"
Check: Package existence for "libaio-devel-0.3.106 (i386)"
Node Name Available Required Comment
rac2 libaio-devel-0.3.106-5 (i386) libaio-devel-0.3.106 (i386) passed
Result: Package existence check passed for "libaio-devel-0.3.106 (i386)"
Check: Package existence for "libaio-devel-0.3.106 (x86_64)"
Node Name Available Required Comment
rac2 libaio-devel-0.3.106-5 (x86_64) libaio-devel-0.3.106 (x86_64) passed
Result: Package existence check passed for "libaio-devel-0.3.106 (x86_64)"
Check: Package existence for "libgcc-4.1.2 (i386)"
Node Name Available Required Comment
rac2 libgcc-4.1.2-48.el5 (i386) libgcc-4.1.2 (i386) passed
Result: Package existence check passed for "libgcc-4.1.2 (i386)"
Check: Package existence for "libgcc-4.1.2 (x86_64)"
Node Name Available Required Comment
rac2 libgcc-4.1.2-48.el5 (x86_64) libgcc-4.1.2 (x86_64) passed
Result: Package existence check passed for "libgcc-4.1.2 (x86_64)"
Check: Package existence for "libstdc++-4.1.2 (i386)"
Node Name Available Required Comment
rac2 libstdc++-4.1.2-48.el5 (i386) libstdc++-4.1.2 (i386) passed
Result: Package existence check passed for "libstdc++-4.1.2 (i386)"
Check: Package existence for "libstdc++-4.1.2 (x86_64)"
Node Name Available Required Comment
rac2 libstdc++-4.1.2-48.el5 (x86_64) libstdc++-4.1.2 (x86_64) passed
Result: Package existence check passed for "libstdc++-4.1.2 (x86_64)"
Check: Package existence for "libstdc++-devel-4.1.2 (x86_64)"
Node Name Available Required Comment
rac2 libstdc++-devel-4.1.2-48.el5 (x86_64) libstdc++-devel-4.1.2 (x86_64) passed
Result: Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)"
Check: Package existence for "sysstat-7.0.2"
Node Name Available Required Comment
rac2 sysstat-7.0.2-3.el5 sysstat-7.0.2 passed
Result: Package existence check passed for "sysstat-7.0.2"
Check: Package existence for "unixODBC-2.2.11 (i386)"
Node Name Available Required Comment
rac2 unixODBC-2.2.11-7.1 (i386) unixODBC-2.2.11 (i386) passed
Result: Package existence check passed for "unixODBC-2.2.11 (i386)"
Check: Package existence for "unixODBC-2.2.11 (x86_64)"
Node Name Available Required Comment
rac2 unixODBC-2.2.11-7.1 (x86_64) unixODBC-2.2.11 (x86_64) passed
Result: Package existence check passed for "unixODBC-2.2.11 (x86_64)"
Check: Package existence for "unixODBC-devel-2.2.11 (i386)"
Node Name Available Required Comment
rac2 unixODBC-devel-2.2.11-7.1 (i386) unixODBC-devel-2.2.11 (i386) passed
Result: Package existence check passed for "unixODBC-devel-2.2.11 (i386)"
Check: Package existence for "unixODBC-devel-2.2.11 (x86_64)"
Node Name Available Required Comment
rac2 unixODBC-devel-2.2.11-7.1 (x86_64) unixODBC-devel-2.2.11 (x86_64) passed
Result: Package existence check passed for "unixODBC-devel-2.2.11 (x86_64)"
Check: Package existence for "ksh-20060214"
Node Name Available Required Comment
rac2 ksh-20100202-1.el5 ksh-20060214 passed
Result: Package existence check passed for "ksh-20060214"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
rac2 does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
rac2 0022 0022 passed
Result: Default user file creation mask check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Pre-check for cluster services setup was unsuccessful.
Checks did not pass for the following node(s):
rac1
[oracle@rac1 bin]$ ssh rac2 "date;hostname"
Wed Dec 15 19:59:58 CET 2010
rac2.localdomain
[oracle@rac1 bin]$ hostname
rac1.localdomain
[oracle@rac1 bin]$ uname -a
Linux rac1.localdomain 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[oracle@rac1 bin]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 rac1.localdomain rac1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
#127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.101 rac1.localdomain rac1
192.168.2.102 rac2.localdomain rac2
# Private
192.168.0.101 rac1-priv.localdomain rac1-priv
192.168.0.102 rac2-priv.localdomain rac2-priv
# Virtual
192.168.2.111 rac1-vip.localdomain rac1-vip
192.168.2.112 rac2-vip.localdomain rac2-vip
# SCAN
192.168.2.201 rac-scan.localdomain rac-scanthe same on RAC2.
[oracle@rac1 ~]$ id oracle
uid=1100(oracle) gid=1000(oinstall) groups=1000(oinstall),1200(dba)
[oracle@rac2 ~]$ id oracle
uid=1100(oracle) gid=1000(oinstall) groups=1000(oinstall),1200(dba)I'm reading this tutorial
>
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
>
because i would like to install in a virtualbox environment.
Cheers,
Lain
Edited by: Lain on 13-gen-2011 20.06Make sure you have ssh configured properly on both nodes.
Do you have the Oracle Clusterware Installation 11g Release (whatever your platform is)?
Read this section 2.12.3 Enabling SSH User Equivalency on Cluster Member Nodes
Try this on rac1.
ssh rac2 date
Try this on rac2.
ssh rac1 date
If these don't return the date of the other host you haven't configured SSH properly. -
Pro*c program causing core dump in 11g
hello every one,
I am trying to debug a pro*c program which is resulting in a core dump. It used to work fine in with Oracle 10g precompiler but is causing a core dump with 11g. When I run dbx here is what I get.
dbx wreg309
Type 'help' for help.
[using memory image in core]
reading symbolic information ...
Segmentation fault in u_fsetcodepage_3_8 at 0x9000000014f4f70 ($t1)
0x9000000014f4f70 (u_fsetcodepage_3_8+0x68) f87f0010 std r3,0x10(r31)
Any ideas what this means ? Thanks.Hi,
I came across your problem on the Oracle Discussions Forum from back on June of 2009.
I am working with a pro*c program, in Banner 8. I getting the same message from a core dump,, that you got. I was hoping
you might have written down what you did to resolve it.
My pro*c program is key to running all the SQR code we have. So it's very important. The version of sqr that gets
linked into it is 32-bit and our environment is 64-bit. Our contract with Oracle for SQR has lapsed (it's a long
and expensive story and this is probably not the place). My whole migration to Oracle 11 is being held up by this.
I realize it's been a while since you worked on it but if you could tell me how you resolved your problem, I might be
able to do the same.
Thanks,
Tom Mayne
North Shore Community College
Danvers MA
[email protected]
cell 978 423 6867 -
Pro*Fortran support on Oracle 11g
Hi,
I have received conflicting information whether Oracle 11g supports a Fortran precompiler or not. Does anyone know if Fortran precompiler is supported on Oracle 11g (I could find precompiler manuals easily) and on what platforms Fortran precompiler is/is not supported and what versions of 11g you would find this support ?
Could you also provide a link to the documentation where I could find this information and supported plantforms?Studio Fortran has no special support for databases, nor does Studio provide Pro*Fortran.
Questions about database programming should be directed to a database programming forum.
Start here:
https://forums.oracle.com/forums/category.jspa?categoryID=18
Maybe you are looking for
-
How do I make a new iCloud account with IOS7?
I updated to iOS 7 and starting to get my sisters text. Then my sister updated to iOS 7 and started to get my text. I then tried to disconnect the iCloud and messed up my contacts. How do I make my own iCloud account and reset my contacts what they w
-
i just wanted to restore from 6.1 to 6.1.1 on my iphone 4s and itunes gave me an error -1 and know it doesnt work i dont know if the warranty from 1 year of apple can fix it or what i can do to solve the problem... as i said i just wanted to update a
-
How do I purchase Keynote from the app store when it only shows "update"
I bought a Macbook Pro from my office and the Keynote program was purchased by another employee. I want my own copy, however, the App Store shows "Update" rather than "Buy App" so I cannot just buy another copy. Am I missing something? Is there anoth
-
How to handle Changes in the Structure of Outbound Message.
Hi Experts, I have a File2RFC scenario where the Outbound Message fields are (for e.g,) ID,Name,Loc, and Status. The structure of the xml file which needs to be picked by sender file adapter is changing each time based on the data entered by the user
-
Exporting 5.1 audio from Audition to single, multichannel audio file
I'm having problems exporting 5.1 audio. I need to be able to import a 5.1 (or 8 channel file, if left total and right total are included), edit one of the channels individually, and export the session to a single .WAV file containing 6 (or 8) separ