RMAN backup is getting failed after oracle 11g upgarde (11.2.0.2)

Hi Basis Expert,
We have done oracle 11g ugrade (11.2.0.2) in our Dev BI system.
But after the upgrade the RMAN backup is failing. The backup use to work fine when we were on 10g (10.2.0.4).
Has anyone face this issue earlier.
Appreciate your help.
Regards,
Anil Shenoy

Hello Anil,
Syntax is -
ln -s /path/to/original/ /path/to/linkName
Output will be -
linkName --> original
In your case, 112_64 is the link name according to above SAP Note and 11202 is the original/physical path. So, the command should be -
ln -s /oracle/<DBSID>/11202 /oracle/<DBSID>/112_64
And the Result should be, 112_64 --> 11202 (in short)
So, I think you should change the existing link, 11202->112_64
Thanks

Similar Messages

Oracle latest version after oracle 11g

Hi,
I am a Oracle DBA , Can any one please tell me what is the version released after oracle 11g ?
and what is latest oracle version?
Thanks in advance
Venkat

user13451089 wrote:
Hi,
I am a Oracle DBA , Can any one please tell me what is the version released after oracle 11g ?
and what is latest oracle version?
Thanks in advance
VenkatDear Venkat
The latest version relased is Oracle 11g. Next should be 12g :)

RMAN backup in RAC failing with error ORA-19566

Hi all, i have 2 node RAC and i am trying to take rman backup of the database which is in ASM filesystem.
There is a corruption in SYSAUX file and rman is failing to take backup of the sysaux datafile and error thrown at the end like
piece handle=/home/oracle/orabackup/BLOOM_LVL0_20120627_1qnejueh_s58_p1 tag=TAG20120627T185538 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:56
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/27/2012 18:56:17
*ORA-19566: exceeded limit of 0 corrupt blocks for file +DATA/bloom/datafile/sysaux.257.775475317*
Then i tried to validate the backup in rman of the datafile sysaux nad fired the following query
SQL> SELECT * FROM v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
3 32011 1 0 ALL ZERO
3 32049 40 0 ALL ZERO
3 32034 1 0 ALL ZERO
3 28964 1 1399837 LOGICAL
3 32015 2 0 ALL ZERO
and found all the blocks in the table WRH$_SQL_PLAN.
Then dropped the table, and tried to take backup of the database and it is failing again with the same error..
ANY SOLUTION TO TAKE BACKUP OF THE DATABASE.
anyhow we can SET MAXCORRUPT FOR DATAFILE 3 to value, but does this works all time...
Thanks in advance,
TEJAS

Both are good suggestions, but
Osama-mustafa wrote:
RMAN> blockrecover datafile 5 block 2684; -- Fix Eror That ship has already sailed:
TEJAS_DBA wrote:
And Yes this is the first time i am taking backup on the database.And:
Osama-mustafa wrote:
Or Skip Option
Like
RMAN> RUN{
2> SET MAXCORRUPT FOR DATAFILE 1,3 to 1;
3> BACKUP DATABASE;
4> }The OP was aware of this option and hopefully was able to get at least some sort of a backup eventually. But as for the dropped WRH$_SQL_PLAN, TEJAS is, I will use the word "braver" than most. And as often is the case, Dan Morgan offered the only bit of sensible advise.
Open an SR.
Good luck.

CRS not starting after Oracle 11g Grid was succesuflly installed

Hi:
Have 2 node RAC. My Shared storage is on openfiler.
Oracle 11g Grid was successfully installed and all the services was working fine. When i restarted the system I found CRS was not coming up. Remaining processes were up and running.
Let me explain what I did: (O/s RHEL 5.4 & oracle 11g R2 grid)
I have a partition in shared disk /dev/sdc1 (I have other partitions, but thought of using only one for OCR and voting disk). (did not define it as raw partition as I used to do in 10g RAC).
While installing Oracle grid and when it prompted to enter the Diskgroup for OCR and Voting disk I gave a name DGDATA and choose only one (external redundancy) disk “/dev/sdc1″ (it does not ask for one for OCR and one for Voting as it used to do in 10g clusterware installation). As per my assumption both OCR and Voting disk were created within /dev/sdc1 (after installation when I queried I got the same info)
The Oracle grid installation has gone through successfully. when I restart the system I find CRS not starting.
The log says: “Error PROC:26: Error while accessing the physical storage ASM……..
ORA-01034: oracle not available...
Could not init OCR, code:26….
Linux permission denied".
For your information….ASM instance is up (check in both the nodes) and I find the diskgroup mounted.
Can anyone help on this.
Also let me know how to uninstall Oracle 11g Grid software and configuration. If I have to reinstall the Oracle 11g grid software and config once again is it possible without reinstalling RHEL. Let me know the steps or any link please. don't want to get into a mess again.
Thanks in advance.
Regards
Dinesh

Jorg, I even tried to nomount the DB instance using initDBRAC.ora pfile. Then tried to create spfile still got the same error.
The second trace file which I have pasted looks like some memory dump.
ASM_DISKSTRING= /dev/sdc*
***********************************************************************1st trace file
Fatal NI connect error 12547, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser)(CONNECT_DATA=(CID=(PROGRAM=oracle@skyit6)(HOST=skyit6)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 517
TNS-00517: Lost contact
nt secondary err code: 32
nt OS err code: 0
ERROR: Failed to connect with connect string: (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser))
Wed Jun 01 01:27:07 2011
ERROR: slave communication error with ASM; terminating process 16772
Errors in file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc:
----======================2nd trace file
Trace file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Real Application Clusters option
ORACLE_HOME = /oraeng/app/oracle/product/11.2.0
System name: Linux
Node name: skyit6
Release: 2.6.18-164.el5
Version: #1 SMP Tue Aug 18 15:51:54 EDT 2009
Machine: i686
Instance name: DBRAC
Redo thread mounted by this instance: 0 <none>
Oracle process number: 25
Unix process pid: 16772, image: oracle@skyit6 (TNS V1-V3)
*** 2011-06-01 01:27:07.010
*** SESSION ID:(1.3) 2011-06-01 01:27:07.010
*** CLIENT ID:() 2011-06-01 01:27:07.010
*** SERVICE NAME:() 2011-06-01 01:27:07.010
*** MODULE NAME:(sqlplus@skyit6 (TNS V1-V3)) 2011-06-01 01:27:07.010
*** ACTION NAME:() 2011-06-01 01:27:07.010
ERROR: slave communication error with ASM; terminating process 16772
*** 2011-06-01 01:27:07.035
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=2, mask=0x0)
----- Error Stack Dump -----
----- Current SQL Statement for this session (sql_id=bff5sku8phfgx) -----
create spfile='+dgasmspfile/spfileDBRAC.ora' from pfile
*** 2011-06-01 01:27:07.070
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
skdstdst()+41 call kgdsdst() BF9E05FC ? 2 ?
ksedst1()+77 call skdstdst() BF9E05FC ? 0 ? 1 ? AB80E70 ?
852F42A ? AB80E70 ?
ksedst()+33 call ksedst1() 0 ? 1 ?
dbkedDefDump()+2699 call ksedst() 0 ? 0 ? BF9E0D40 ? 0 ? 0 ?
0 ?
ksedmp()+47 call dbkedDefDump() 2 ? 0 ?
kfTerminateMe()+75 call ksedmp() 2 ? 3 ? F1170AC ? F149234 ?
5 ? BF9E0A6C ?
kfnCheckCommError() call kfTerminateMe() F149234 ? BF9E0C1C ?
+32 B033D83 ? 29392378 ?
F149234 ? EB00601 ?
kfncSlaveSubmit()+5 call kfnCheckCommError() 29392378 ? F149234 ?
83
kfncFileDelete()+11 call kfncSlaveSubmit() BF9E0E5C ? 0 ? F147B24 ?
81
kfioDelete()+126 call kfncFileDelete() 29DEE0 ? 1C ?
ksfddel1()+582 call kfioDelete() 29DEE0 ? 1C ? D ?
ksfddel()+187 call ksfddel1() 29DEE0 ? 1C ? D ? 0 ?
BF9E0F2C ? 9BA2 ?
ksp_spfile_create() call ksfddel() 29DEE0 ? 1C ? D ? 0 ?
+677
kspcspfp()+791 call ksp_spfile_create() BF9E49D4 ? 0 ? 29DEE0 ? 1C ?
7D02 ? 0 ?
kspocte()+67 call kspcspfp() 29DEE0 ? 1C ? F074CC4 ? F ?
61,1 1%
Regards
Dinesh

Importing a dump fails on Oracle 11g

Hi
I am trying to import a dump which was created from Oracle 10g version 10.2.0.3 TO Oracle 11g Release 11.1.0.6.0
Issue 1)
The command i am using is
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world file=dmpersist.dmp full=y ignore=y
This command works fine on Oralce 10g(if i try to import the file to Oracle 10g) but fails on Oralce 11g with following error
"Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by SYS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses UTF8 character set (possible charset conversion)
. importing SYS's objects into DMUSER_02
. importing DMPERSIST's objects into DMPERSIST
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist"
Issue 2)
If i use following command
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world file=dmpersist.dmp fromuser=SYS touser=dmuser_02 ignore=y
I get error
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses UTF8 character set (possible charset conversion)
Import terminated successfully without warnings.
Any info/pointers/help
from
nayeem

Issue 1)
The command i am using is
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world
file=dmpersist.dmp full=y ignore=y
. importing DMPERSIST's objects into DMPERSIST
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist"Make sure user DMPERSIST exists. Oracle will not create user for you because it looks like this dump file is not from full expor but a schema level export.
>
Issue 2)
If i use following command
imp dmuser_02/dmuser_02@bnhpdb11_o11ut03.world
file=dmpersist.dmp fromuser=SYS touser=dmuser_02
ignore=y
I get error
import done in US7ASCII character set and UTF8
NCHAR character set
import server uses UTF8 character set (possible
charset conversion)
Import terminated successfully without warnings.
No issue here. The message looks totally normal.

Pro*C program fails in Oracle 11g enviroment.

Hi,
Right now we have oracle 10g environment in production and Pro*C program compilation and execution works fine.
We are upgrading Oracle 10g to Oracle 11g.
When I test the Pro*C program compilation and execution in Oracle 11g environment, the compilation works fine, but the execution fails with following error messgae,
ld.so.1: test_proc_pgm: fatal: libclntsh.so.11.1: open failed: No such file or directory
I have verified the LD_LIBRARY_PATH in unix machine where we call the test_proc_pgm, LD_LIBRARY_PATH contains the following libraries..
u02/oracle/product/11.2.0.3/lib:/lib:
Please advise.
Thanks and Regards

This forum is about general programming in C, C++ and Fortran, and about details of using the Solaris Studio suite of compilers and programming tools.
Questions about Oracle database programming are more likely to get an answer in a database programming forum. A list of forums is here:
https://forums.oracle.com/forums/category.jspa?categoryID=18

OCI calls failing for Oracle 11g 11.1.0.7 (64 bit)

Hi,
I have a 32bit app which we build and compile in a 32 bit OS, we then deploy this in a 64 bit Windows 2008 R1 machine which has a 11g 64 bit DB;
when the code make the OCI calls the app terminates.On debugging we found out that its failing to make OCI calls on the connect() method of a .cpp file.
This connect code is a custom wrapper class created for OCI which only accepts a complete SQL statement mainly used for looking after rollback segments, etc.
The code runs perfectly fine when we internally call the ORACMD of sqlplus and directly execute the sql from a script.
It only fails when our code tries to connect to the DB and make OCI calls.
I have also installed a 32 bit Oracle 11g Client 11.1.0.7 since I am using a 32 bit app.
Is there any compatibility issues between these 2 versions or the dll's?
Why is it failing while making OCI calls and is there any resolution?
My machine and setup details:
OS: Windows 2008 R1
DB : Oracle 11g R1 11.1.0.7 (64 bit)
Client: Oracle 11g R1 11.1.0.7 (32 bit)
Our App: 32 bit
ORACLE_HOME = // this is pointing to the 64 bit DB
I tried pointing the oracle_home to the client still no go.
Any suggestions on this will be appreciated.
Regards
Roy

user13376823 wrote:
how do i find that my database is using big file tablespace management or not ?
SQL> select TABLESPACE_NAME,BIGFILE from dba_tablespaces;
TABLESPACE_NAME                BIG
SYSTEM                         NO
UNDOTBS1                       NO
SYSAUX                         NO
USERS                          NO
UNDOTBS2                       NO
TEMP1                          NO
TEMP3                          NO
TEMP2                          NO
8 rows selected.For tablespaces with smallfile datafile maximun datafile size is 32GB, where as bigfile datafile size is 8 exabytes.

Dbconsole start failed on Oracle 11G

After installing Oracle 11G and creating a new database, I have created new db console reporsitory, with the commands:
set ORACLE_SID
set ORACLE_HOME
set SYS_PWD
set PORT
emca -repos create -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
emca -config dbcontrol db -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
At the end, the command fails:
INFO: This operation is being logged at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log.
Sep 22, 2008 10:26:41 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Sep 22, 2008 10:26:44 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Sep 22, 2008 10:27:13 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /exec/products/oracle/v11.1.0/bin/emctl start dbconsole
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
Could not complete the configuration. Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
When I want to start dbconsole manually, I have the following error:
emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://RD_x3650_22:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/log
The logs give the following message:
emdctl.trc:
2008-09-23 00:19:32 Thread-3083821984 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Open wallet failed, ret = 28750
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: nmehlenv_openWallet failed
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Error initializing SSL
2008-09-23 00:19:32 Thread-3083813792 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR main: nmectla_agentctl: Error connecting to https://RD_x3650_22:3872/emd/main. Returning status code 1
emoms.trc:
2008-09-22 23:07:08,275 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendClusterIntegration
2008-09-22 23:07:08,276 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNodeIntegration
2008-09-22 23:07:08,277 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.common.ui.intg.ProvCommonIntegration
emagent.log:
2008-09-22 23:06:59 Thread-3083801408 EMAgent started successfully (00702)
2008-09-22 23:14:56 Thread-3083817792 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-22 23:14:57 Thread-3083817792 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:58 Thread-3083817792 EMAgent started successfully (00702)
2008-09-23 00:14:00 Thread-3083813696 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-23 00:14:01 Thread-3083813696 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:03 Thread-3083813696 EMAgent started successfully (00702)
I've tried this:
- set correctly TIMEZONE,
- configure secure dbconsole (emctl secure dbconsole),
- stop service nscd,
- change the port number,
- recreate the repository....
But the problem still occurs...
Has someone another idea?
Thank You
Anne

emctl secure agent does not exist with Oracle 11G
I tried:
emctl secure dbconsoleOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
[https://RD_x3650_22:5500/em/console/aboutApplication|https://rd_x3650_22:5500/em/console/aboutApplication]
Please enter repository password:
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Securing dbconsole... Sucessful.
But the dbconsole starting still have errors
The command status gives:
emctl status agent -secureOracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3938.
Checking the security status of the OMS at [http://RD_x3650_22:5500/em/upload/..|http://rd_x3650_22:5500/em/]. Done.
OMS is running but has not been secured. No HTTPS Port available.
And the command "emctl ssl off" does nots exist with Oracle 11G
Anne

Brtool getting failed after kernel upgrade

Dear Guru's
After doing kernel upgrade i tried to schedule check database from db13 and am getting this error
Please can any one guide me in resolving this issue
Job started
Step 001 started (program RSDBAJOB, variant &0000000000079, user ID BASIS)
Execute logical command BRCONNECT On host ECCQA
Parameters: -u / -jid CHECK20101014143155 -c -f check
BR0801I BRCONNECT 7.00 (49)
BR0477I Oracle pfile /oracle/ZEQ/102_64/dbs/initZEQ.ora created from spfile /oracle/ZEQ/102_64/dbs/spfileZEQ.ora
BR0805I Start of BRCONNECT processing: ceeilnol.chk 2010-10-14 14.31.55
BR0252E Function fopen() failed for '/oracle/ZEQ/sapcheck/ceeilnol.chk' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/ZEQ/sapcheck/ceeilnol.chk failed
BR0806I End of BRCONNECT processing: ceeilnol.chk2010-10-14 14.31.56
BR0280I BRCONNECT time stamp: 2010-10-14 14.31.56
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Regards
Mohammed

Hi
Log in as root and run the saproot.sh script available in the kernel directory as follows:
./saproot.sh <SID>
Hope this will help you.

Environment variable path failed in oracle 11g installation

hi all,
i am reinstalling oracel 11g in my window 7 64 bit machine after i uninstalled it. however, i got an issue that is environment variable path failed in the installation process. this didn't happen when i firstly successfully installed oracle. how can i fix the issue? thanks in advance.
regards,
hong

user571093 wrote:
hi,
the problem is i uninstalled oracle 11g in my windows 7 64 bit machine and then try to install it on my machine. during the prerequisite check stage, an error message popped up like this:
environment variable: "PATH" failed
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length. (more details)
Expected Value
: 1023
Actual Value
: 1433
so, what is the reason caused this problem and how to fix it. thanks in advance.
hongI believe the error message is self-explanatory - assuming you you using a supported database and OS combination (which are unknown)
environment variable: "PATH" failed+
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.+
Expected Value+
*: 1023*
Actual Value+
*: 1433*
Your PATH variable exceeds the limit of 1023 characters
HTH
Srini

Getting started with Oracle 11g express edition

I am currently in a college class doin SQL. I have downloaded oracle 11g express edition. I'm trying to get started and when I try to create a new connection it takes me to a screen where I have to sign in. When I use my oracle sign in and pass word it tells me it doesn't recognize it. No I know it works because I can sign in on the web site. But it won't connect me or allow me to make a new connection. I really don't understand what is going on. I can seriously use some help. Something that will take me step by step on what I need to do. I have to create a data base and I'm not sure how to do it.
Thank You
Carl Gavin

Hello Carl,
Something that will take me step by step on what I need to do.Sounds like what you are searching for is the [url http://docs.oracle.com/cd/E17781_01/admin.112/e18585/toc.htm]Getting Started Guide.
If you need some advanced knowlege, there would be the "2 Day DBA Guide", which, among other topics, contains a section on [url http://docs.oracle.com/cd/E17781_01/server.112/e18804/connecting.htm#CEGIFAHF]Connecting to the Database. I think you'll find all necessary information (background and step by step description) you need.
-Udo

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Backup failure from SAP after oracle upgrade

Hi All,
We have upgraded oracle from 11.2.0.1.0 to 11.2.0.3.0 on windows 2008 R2 VM(64 bit). We are able to take backup successfully through BRtools at OS level but when we are trying through DB13 we are getting error as mentioned below.
BR0274E File 'L:\ORACLE\SOC\SAPDATA4\SYSTEM_1\SYSTEM.DATA1' not found
BR0274W File 'K:\ORACLE\SOC\SAPDATA3\TEMP_12\TEMP.DATA12' not found
BR0314E Collection of information on database files failed
Our BRtool verison is 18 so I think SAP note 1625038 doesn't address our problem.
We have placed the utl file in the new oracle home and also did some other required changes.
Kindly suggest how we can resolve this problem.
Regards,
Mridul

Hi Sunil,
We haven't did any modification in utl file, just placed that in new oracle home and modified the location of utl parameter file in initsid.sap.
Venkata,
DBcheck is ending with warning. Below are some extracts:
BR0970W Database administration alert - level: ERROR, type: DATA_FILE_MISSING, object: L:\ORACLE\SID\SAPDATA4\SYSTEM_1\SYSTEM.DATA1
BR0973W Database operation alert - level: WARNING, operation: beidjqtt.fnr, time: 2012-03-20 14.42.33, condition: Last complete database backu
BR0973W Database operation alert - level: WARNING, operation: beidjqtt.fnr, time: 2012-03-20 14.42.33, condition: Last 'fnr' operation failed
BR0973W Database operation alert - level: WARNING, operation: ceidgtux.log, time: 2012-03-20 00.38.03, condition: Last 'log' operation failed
BR0973W Database operation alert - level: WARNING, operation: behyzktk.dbv, time: 2012-02-26 09.00.24, condition: Last 'dbv' operation failed
BR0973W Database operation alert - level: WARNING, operation: vehauwtz.dpt, time: 2011-10-21 12.20.47, condition: Last 'dpt' operation failed
BR0973W Database operation alert - level: WARNING, operation: aehauext.sve, time: 2011-10-21 08.59.37, condition: Last 'sve' operation failed
BR0978W Database profile alert - level: ERROR, parameter: REMOTE_OS_AUTHENT, value: FALSE (<> TRUE)
Regards,
Mridul

Failed to oracle 11g databade

Hi,I can't get the "OK" when I used the "tnsping" command,and I got the failed information as follows,so I need your help ,thanks a lot!
C:\>tnsping orcl.am.mot.com
TNS Ping Utility for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUL-
010 12:59:30
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name

tnsping orcl.am.mot.com
TNS-03505: Failed to resolve name
I think the error message is pretty clear.
See the D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora file which source is used for resolution (It is configured by NAMES.DIRECTORY_PATH variable and the value is typically TNSNAMES). If so then you are probably missing entry in your tnsname.ora file which is located (by default) in $ORACLE_HOME/network/admin directory, so in your case it would be: D:\app\DPXC67\product\11.1.0\db_1\network\admin\sqlnet.ora
For more information refer to documentation:
http://download.oracle.com/docs/cd/E11882_01/network.112/e10835/tnsnames.htm#NETRF007

Brarchive/brbackup fails after oracle upgrade from 9206 to 10.2.0.2

I have upgraded database from 9206 to 10.2.0.2. I have upgraded brtools
to kernel release 7.00 (patch level 18). When I run brbackup/brarchive
it is failing. Brarchive command I am trying to run is:
brarchive -c -u / -r initTC8.utl.nbkp.ethp2038 -cs
I have set trace level to 15 (BR_TRACE=15) and run it. I will upload
log file with the trace (file_name=advxsuvv.cps)
I am running brarchive as ORASID user with environment:
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep oracle
HOME=/oracle/TC8
PATH=/oracle/TC8/102_64/bin:.:/oracle/TC8:/usr/sap/TC8/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/usr/bin/X11:/usr/contrib/bin/X11:/usr/vue/bin:/opt/soeg/bin:/opt/perf/bin:/opt/upgrade/bin:/opt/hpnp/bin:/opt/lrom/bin:/usr/local/bin:/opt/openssh/bin:/opt/openssh/sbin
SHLIB_PATH=/usr/sap/TC8/SYS/exe/run:/oracle/TC8/102_64/lib
ORACLE_HOME=/oracle/TC8/102_64
ORACLE_BASE=/oracle
ORA_NLS10=/oracle/TC8/102_64/nls/data
SAPDATA_HOME=/oracle/TC
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep LIB
DIR_LIBRARY=/usr/sap/TC8/SYS/exe/run
SHLIB_PATH=/usr/sap/TC8/SYS/exe/run:/oracle/TC8/102_64/lib
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep NLS
ORA_NLS10=/oracle/TC8/102_64/nls/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
All other brtools actions works fine (brspace, brconnect...)
From advxsuvv.cps file find error message:
'********************************************************************************^'
'Program:               /usr/sap/TC8/SYS/exe/run/backint 5.1^'
'Input File:            /oracle/TC8/saparch/.advxsuvv.lst^'
'Profile:               /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038^'
'Function:              BACKUP^'
'Backup Type:           BACKUP_FILE^'
'********************************************************************************^'
'********************************************************************************^'
BR0248I BR_TRACE: level 4, function BrPipeClose entry with '/usr/sap/TC8/SYS/exe/run/backint -u TC8 -f backup -i /oracle
/TC8/saparch/.advxsuvv.lst -t file -p /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038 -c'
BR0248I BR_TRACE: level 5, function BrOraSigPatch entry with 'FALSE'
BR0248I BR_TRACE: level 6, function BrZombieKill entry with 'void'
BR0250I BR_TRACE: level 6, function BrZombieKill exit with 'void'
BR0249I BR_TRACE: level 5, function BrOraSigPatch exit with 0
BR0249I BR_TRACE: level 4, function BrPipeClose exit with 2
BR0280I BRARCHIVE time stamp: 2007-08-14 15.12.09
BR0279E Return code from '/usr/sap/TC8/SYS/exe/run/backint -u TC8 -f backup -i /oracle/TC8/saparch/.advxsuvv.lst -t file
-p /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038 -c': 2

here is output from command:
ethp2038:ac8558 28> file /usr/sap/TC8/SYS/exe/run/backint
/usr/sap/TC8/SYS/exe/run/backint:       PA-RISC1.1 shared executable dynamically linked dynamically linked
Once more for your reference, this is Itanium 11.23 HP UX server
ethp2038:ac8558 30> uname -a
HP-UX ethp2038 B.11.23 U ia64 3974368537 unlimited-user license
ethp2038:ac8558 31> model
ia64 hp server rx4640
BRtools version:
ethp2038:ac8558 32> brtools -V
BR0651I BRTOOLS 7.00 (18)
Patch   Date     Info
10 2006-01-05 BR*Tools fail due to SAP license problems (note 912969)
11 2006-01-11 Small functional enhancements in BR*Tools (note 914174)
13 2006-03-29 BR*Tools support for MDM databases (note 936665)
16 2006-08-11 BR*Tools start error: library libnnz10 not found (note 972136)
release note               849483
kernel release             700
patch date                 2006-09-15
patch level                18
make platform              hpia64
make mode                  OCI_102
make date                  Sep 23 2006

RMAN backup is getting failed after oracle 11g upgarde (11.2.0.2)

Similar Messages

Maybe you are looking for