Prob related to billing

Hi
I have created a delivery(VL01n) and i got the delivery document no.
also. At the billing level i am not able to access the saved delivery
document no. The Error is "Doc. does not exist in the database or in
the Archive." Bcs of this i am not able to create billing.
plz help me in this regard
sudheer chowdary.k.

Hi Sudheer,
I had faced similar issue earlier and as mentioned above by experts those can be the resons.
Mostly, in Delivery if your Output Type has any issue, system will give Update Error which you can see either via SM13 or SBWP in your SAP Inbox.
You will get exact error what it is and refer it to your ABAPer.
If your Number Range is finished is similar type of another example for error.
In General, while any transaction updates, system generates Number and shows it to you, but updates your Document number in Data base table after finishing all activities like triggering Outputs and generating Spools.
If it gets error during that processing, You will not be able to see Delivery document in VL03N it self or process it further.
Regards,
MJ.

Similar Messages

  • Order-related intercompany billing

    Hi
    I know that the standard system only generates an intercompany billing document for the cross-company code sales if a delivery is involved.
    The order-related intercompany billing and the cross company process for service items, leasing and maintenance items and third-party items is only possible with using the sap note 63459.
    I am using ideas ecc 6.0, where in the report required for creation of intercomapny billing ZZIVAUFT is already there. But here it asks for billing documnet & not the Purchase order or sales order.
    Has any body worked on this note. Can i get the deatils how to impliment this note.
    Thanking you
    Vinod

    Hi,
    buddy don't know abt ecc6 but it'll great if you tell me what all need to be done for order related inter comapny billing in 4.7 beacuse i think you know abt it.I gone through with that OSS notes 63459 but could'nt get through with it.Could you expalin.
    I hope will get a response from you.
    Regards,
    SATYA

  • User exit in order related IC billing

    Hello,
    we implemented note 63549 and all related notes to make order related IC billing run through output RDIV and program RVIVAUFT.
    We have a problem to find a clever way to realize the user exit KOMKBV3_FILL, which should perform a check on cross company transaction and fill consequently field CROSS_COMP, to be used in the output requirement 018. At the moment when the system runs this userexit the customer invoice has not been posted yet and only header fields are available, so it is not possible to go back through doc flow and check for instance plant company code vs sales rog company code. Any suggestion?
    Thanks

    Hi,
    Another way is to make a validation (OB28) and do your checks there.
    Regards,
    Eli

  • Order-related intercompany BIlling - RVIVAUFT

    Dear SAP Experts,
    Currently I am doing the Order-related intercompany Billing, However the 2nd billing document is not created. I have referred to OSS notes and they are referring to report RVIVAUFT and the output type RDIV and copy control settings.
    I have made the copy control settings (Order Billing - Requirement 036 in the Item cat.) and I could not find the output type RDIV (Billing outputs). I am using ECC6.0
    - Can anybody tell me how to use this report RVIVAUFT, which billing documents I have give in the selection screen?
    - What is the standard output type i can copy to create RDIV?
    - Is there any additional configuration I need to do for Order-related intercompany Billing?
    Regards,
    Murali

    Hello Raghavendra,
    I have already implemented the notes you have referred, however the process is not working.
    Let me tell you my requirement in detail:-
    We have two company codes one in India (Comp 1) and second in Germany(Comp 2) who provides the service to their customers.
    Scenario:-
    The German Company sells the Service to customers in Germany, however the service is done from India remotely. Once the service is done German company will create an Invoice to customer and Indian company will invoice the German company
    Customizing:-
    - I have made all the settings for the Intercompany Sales (Delivery related Intercompany)
    - Customized according to the notes 381042.
    Master Data:-
    - Extended the Material to Germany company
    - Maintained the Intercompany pricing conditions.
    - Condition record for RDIV is maintained
    Transactions:-
    1. Customer order is created in German Company (VA01)
    2. Customer Invoice is created in German Company (VF01)
    3. Execute the report RVIVAUFT to create the Invoice to Germany Company. (SE38)
    So When I execute the report RVIVAUFT, system is giving a message Material is not maintained.
    Can you please let me know whether I am following the right steps in the system?
    Regards,
    Murali

  • Order related intercompany billing scenarios

    Hi,
    Need suggestion for order related intercompany billing from project. The scenarios is as follows.
    There will be two diffenr company code under the controlling area of the project. Parent company will use resources from supplying company for executing the Order from customer. The project is service industry scenarios. The billing will be order related milestone billing. Milestone will be triggred from Project builder. There should be automatic revenue & cost posting to respective WBSE on doing billing to customer i.e. Revenue of supplying WBSE will become Cost to Parent WBSE.
    I would like to request you to suggest on the above process for mapping into SD-PS
    Thank you for your coopearation.
    Regards,
    Rakesh Pradhan

    In Sale Order at Line item level, maintain the plant of supplying plant & not the one which have received order.
    Ensure intercompany setting is in place.
    Regards,
    Rajesh Banka

  • Order-Related Intercompany Billing - Copying Partners

    We are using order-related intercompany billing and I need to have one of our custom partner types copy from the sales order to the intercompany bill.  I have not found a way to make this happen.  Can you help?
    Thanks in advance,
    Tracy

    Hi,
    You can copy partner function from Customer master- Add this new partner function in customer master too- Change actual partner number in sales document - you can achieve this
    Thanks
    Chidambaram

  • Project with Resource Related Intercompany Billing (D48)

    Have BP-ERP 604V1, and BP-SOLBLD 70V1 installed. Was able to install baseline package for Germany V1.604, including scenarios and building blocks.
    Now attempting to ...
    - locate where best practice for project with resource related intercompany billing (D48)
    - this would include scope (.xml file) and script files (.txt file)
    We have downloaded the Best Practices for Mining for service marketplace. I can see D48 files in the extraction once complete. The challenge is that I cannot seem to find the .xml file solution file to import. If I could, I would then follow similar process that I did for baseline package for Germany V1.604.
    Does anyone have any insights to the how one gets this loaded? I see a .bpp file, but was expecting an .xml file. I see the opportunity to import via Solution --> Import, but this is looking for .bps file as option other than .xml file.
    Appreciate any tips on this one.
    Thanks,
    Jason

    Hi JP,
    Thanks for your feedback,My scenario is like this,We have a Centralized Company which would be delivering directly to the Customers in other Countries through their plants through Plant abroad concept for Local companies in other countries who would be acting as Selling agents for a commision.
    I would require to design a Intercompany Invoice(Revenue Less Commison) where I require the revenue from the Customer Invoice to be transferred  on the Intercompany invoice.That is all the pricing conditions are required to be copied from Customer invoice to inter company Invoice.
    Looking forward to your advice.
    Thanks and Regards
    Mohammed Roshan

  • Finding Probe Related to Monitor

    I am having an issue finding the probe relating to a Health Monitor in Exchange 2013. The majority of TechNet articles don't include any information on the Health Set Monitors.
    technet.microsoft.com/en-us/library/dn195892(v=exchg.150).aspx
    If you look at the following question, the proposed answer is just not consistent. The method proposed in this article does not always return the name or information relating to the appropriate probe.
    http://social.technet.microsoft.com/Forums/exchange/en-US/0bc7f4cd-cea4-4b52-ae8a-5f013a2628dc/probe-documentations
    In my environment I get a lot of these monitor related errors, but for today the monitor in question is "HubTransport\Transport.ServiceStartError.Monitor"
    Following the previous linked instructions, the returned SampleMask is "Transport/TransportServiceStartError", which is obviously just the name of the monitor itself, not the probe. As i understand it, the only way to check the health of the monitor
    is to run the associated probe. Considering that Microsoft is unwilling to provide the relationship between monitors and probes, is there a consistent way to find this information? 

    Hi,
    From the following article, we can know that probe is responsible for taking measurements on the server and collecting data. The results of those measurements flow into the monitor. The monitor contains all of the business logic used by the system based
    on what is considered healthy on the data collected.
    Managed Availability
    http://technet.microsoft.com/en-us/library/dn482056(v=exchg.150).aspx
    From what you mentioned above, you got a lot of monitor errors, to narrow down the issue, I recommend you use the Get-HealthReport and Get-ServerHealth cmdlets to check the status of every health set.
    Here is a related article for your reference.
    Managed Availability and Server Health
    http://blogs.technet.com/b/exchange/archive/2013/06/26/managed-availability-and-server-health.aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Scneria related to bill back(rebates)

    hi experts
    hope all are doing well,i have one issue related to rebate but it
    is totally z transection.but i now that this is scnerio related to
    bill back process
    1)so anybady can explain me in detail the bill back scnerio in rebate.
    what is accounting entries take place in bill back.
    2)what happend when we run "rebate adjustment"(vbfo) i mean
    what  it will affected in respect of SD and FI perspective..
    Regds
    Nisha A

    2. VBOF , we have to do this transaction to update billing doc, when new rebate proc activated.
    ex. pricing will be rerun, if any pricing condition type are to be updated in billing doc it will take care by this transaction

  • Proforma Invoice program ---delivery related with billing block on SO

    Hi,
    I need some help on Profoma Invoice--delivery related.
    I have created a Sales order with Billing block, then created delivery and picking,handling but no PGI.
    Now I am trying to create a Proforma invoice for delivery (before PGI ),
    I can  create the Proforma invoice manually using VF01 by selecting the document type and by delivery number input in the docs selected.
    But I want to create the proforma for the above mentioned scenario using batch job, I have tried both RV60SBAT and SDBILLDL but both of them are not working.
    Both the program are fetching delivery for proforma creation if PGI is done (Even though the billing block is set on Sales order)
    or Billing block is not there on Sales order if PGI is not done.
    Thanks and Regards,
    Ananda

    Hi,
    The programs below are for the specified transactions below.
    "SDBILLDL" program is for  the transaction "VF04" which is for creating the Final invoice(Original Invoice) i.e. Billing due list.
    Where as "RV60SBAT" is for the T.Code "VF06" which is for creating the invoice in background.
    So these two programs will not create proforma invoices.
    Incase if you have only proforma invoice not final invoice,then maintain this proforma invoice type in "VOV8" T.Code under order/delivery-related billing.thwn you can create Proforma invoice by using Vf04/VF06(By using these programs).
    Regards,
    Krishna.

  • Relation between Billing  line Item and Accounting doc entries

    Hi all
    when r line items in Accounting doc gets generated for a billing doc.
    for ex. if there exists a Billing Doc with 2 lines
    is there any relation to the item in the Billing Doc
    to the Accounting doc line items.
    thanks

    Hi,
    In some situation it is possible that there is a link but in the most situation you use summarization to minalize the number of line items created by invoice (like one line for VAT, general discounts). The total ammount from the customer is the same as on the billing document.
    When you want to have details by line you can found them in CO-PA.
    Paul

  • Order and Third Party Related Intercompany Billing

    Dear All ,
    I am facing a problem in creation of third party order relevant intercompany billing .
    We have created commercial invoice from one co. code , but not able to create interco. invoice on the other co. code .
    Error message while creation of intercompany billing : No open Billing quantity has been determined .
    In our organisation , two co. codes are used because under one co. code sales is booked and under other co. code plant is entered .
    Hence , there is an involvement of commercial billing ( order related ) and intercompany billing ( which is also order - related ) .
    Help which customisation needs to be changed / amended to resolve the issue .
    Thanks .

    Hi
    Check item category  <b>TAS</b> as  billing relevance  <b>F</b>if you do MI<b></b>GO and <b>MIRO</b>, you can bill the quantity
    Rectify whether the line item Updated with Reason for Rejection

  • Tax issue in third party order related intercompany billing

    Hi,
    I have one isseu related to tax determination in third party order related billing document.
    Ordering sales organization : Germany
    Delivering sales organization: France
    In billing document the Delivering country: FR (France)
    Receiving Country: DE (Germany)
    The tax condtion type: MWAS, Application of that condition type: TX.
    Sytem is picking the A1 tax code from country FR and through tax procedure TAXEUR.
    But the actually client requirement is system should pick upt he tax code from country DE (Germany). I.e., system need to pick up from receiving country.
    I tried through SD tax condition records, it is not working.
    I maintained the tax rate through VK11, like
    Departure country (FR) - Destination country (DE)  - Cust.taxclassi - material tax classi - Tax code (XT), the XT is belongs to France, When i maintained this system is not picking the tax amount from FTXP.
    Please let me to come out from this issue.
    Regards
    Lakshmikanth

    Thanks to all

  • Order Related Intercompany Billing - Third Party Order

    Dear all,
    I have configured intercompany billing that is based on the delivery and i have done that successfully, then I tried the third party process but after billing the third party order then the intercompany billing doesn't show up in the vf04, I have searched the SAP Notes especially SAP Notes 63459 but I really haven't got the clue how to do that clearly, if somebody can help me how to configure the intercompany billing for my requirement. I'm using SAP 5.0. I believe something missing in the copying control between sales document and billing document and also for the output type.Please help me very urgent.

    hi,
    Customizing settings are reported in notes 338922, 109254 and 308989.
    During delivery creation the LIKP fields VKOIV/VTWIV/SPAIV/FKAIV/PIOIV/FKDIV/KUNIV must be filled in program FV50XFLK_LIKP_FUELLEN_IV_UML. If you checkt this table and not all of these fields are filled, you have the wrong the customizing. If the error is in your pruduction there is a report with which you can correct the relevant deliveries (of course after correcting your customizing): see note 176476.
    Balazs

  • Creating Delivery related Intercompany Billing with revenue transfer

    Hi,
    I  am required to design a Delivery related Intercompany process where Intercompany Invoice created would be based on revenue transfer from Customer Invoice where Pricing conditions are required to be copied from Customer Invoice Instead of Sales order as in SAP standard.
    It would help if you if you advice me on the required settings.
    Thanks in Advance.
    Regards
    Mohammed Roshan

    Hi JP,
    Thanks for your feedback,My scenario is like this,We have a Centralized Company which would be delivering directly to the Customers in other Countries through their plants through Plant abroad concept for Local companies in other countries who would be acting as Selling agents for a commision.
    I would require to design a Intercompany Invoice(Revenue Less Commison) where I require the revenue from the Customer Invoice to be transferred  on the Intercompany invoice.That is all the pricing conditions are required to be copied from Customer invoice to inter company Invoice.
    Looking forward to your advice.
    Thanks and Regards
    Mohammed Roshan

Maybe you are looking for