Probably the strangest error

I am getting the folloaing error
Activation of the change list canceled Check result for Message Interface MI_TARGET_IN_ASYNC | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyy.com Check result for Data Type DT_TARGET | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyyy.com Check result for Data Type DT_SOURCE | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyy.com Check result for Message Interface MI_SOURCE_OUT_ASYNC | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of y.com Check result for Message Type MT_SOURCE | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of y.com Check result for Message Type MT_TARGET | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyy.com Check result for Message Mapping MM_SOURCE_TARGET | http://www.proto.com/xi/valuemapping: Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyy.com Namespace http://www.proto.com/xi/valuemapping is not defined in the software component version XREF_XI , 1.0 of yyy.com
The thing is thqt obviously this namespace is defined in the SWCV becquse I creqted it in there...

Hi Recardo,
This happens very frequently . The best thing to avoid this happen in future is to activate the NameSapce ,Exchange Fault data and Exchange Log data as sudheer said.Even I am bit confused why this happens.it is better to make a habit of activating namespce as when it is created in order to avoid rework.
Regards
Gopi.

Similar Messages

Windows 8.1 probably the disc is full- error message when i try to save and open a file i downloaded.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.
how much free space on C: do you have available?
you may need a NAS to move some previous downloads too etc
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Starting Firefox I get the "Send Error Report" popup window. It states "firefox.exe has encountered a problem and needs to close."

This just started today. Everything seems fine. I just push the popup off to the side and continue to use the browser. If I were to click on the, "Send Error Report" or the "Don't Send" buttons then Firefox just closes!
Strangest thing yet, trying to figure it out!
Oh, I tried the reboot without add-ons! Even did the reinstall, still the same???

Just got back online, still working on things, BUT ???
I went back and dumped Norton's which I get for free from Comcast. I downloaded the AVG scanner. Went through all the bells & whistles and things seem ok ???? But I haven't done the reboot yet, so will do that soon. But I wanted to drop a line here and let you all know what is happening.
And Thanks Fred, the funny thing was it did seem to have something to do with their update??? I do like Norton's but my son uses this AVG and he said it was better, lol!!! But again, everyone has their favorite!
Mine is Norton's so once I confirm that everything is good, I'm going to try redoing Norton's and I'll try your suggestions, if they don't fix it!!
Thanks again, and will let you know if this is the fixed!!!

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Stop the Internal Error Message in Fireworks CS4 or CS3

About 8 hours ago I ran into what is apparently a fairly
common problem for many people using Fireworks - the error message
that wouldn't allow me to save anything. Luckily, I paid attention
in class long enough to at least know to save my work often, so I
didn't lose much - just a basic wireframe that I threw together in
15 minutes or so. Thankfully, I tried saving when I did or this
would probably be a very tearful night for me. Instead, it's just a
long night. I can deal with that.
But, before I pat my iMac on the top of it's screen and say
"goodnight" I wanted to share with you the secret to "fixing" the
error message. Hopefully this will help those poor souls in the
future who need a little guidance from someone who's been there,
done that, and is too tired to design the t-shirt. This method will
also work on Windows machines.
I'm not saying this is guaranteed to work for you, but I'm
telling you it's worth a shot. It only requires a little of your
time to do and will hopefully be the fix you need. If it's not,
please accept my sincerest understanding of your frustration and
try another method. This fix suggests that you have added, removed,
or relocated fonts on your computer since the last time Fireworks
worked properly, however, even if you haven't done any of those
things I'd still recommend giving this a try. Here's what you do:
1. Open your favorite font manager software. I prefer the
pre-installed Font Book on the Mac, but you can use any font
manager that you want. Some good commercial font management
programs for Mac include, MasterJuggler, Suitcase Fusion, FontAgent
Pro, and Font Explorer X. For Windows you might want to try, Font
Fitting Room, X-Fonter, Suitcase for Windows, OT1 Font Manager by J
M Berthier, MainType, FontExplorer for Windows, Printer’s
Apprentice, FontAgent Pro for Windows, Typograf, or FontExpert.
Those are in no particular order, just in case you were wondering.
2. select all of your installed fonts - including your system
fonts. Run your "validate font" command for the font management
program you're using. Sit back and let it work. I had more than
6,000 fonts on my Mac, so it took a few minutes to run through all
of them.
3. Your font management program should let you know which, if
any, of your fonts are corrupt, duplicates, or otherwise
dead-weight. Chances are there will be a few if you're getting the
internal error message at start-up or save with Fireworks. You need
to delete or at least remove these fonts from the fonts folder. I
had, and I'm ashamed of this, 256 duplicates and 135 dead fonts on
my poor computer. But, in my own defense, I did just reinstall many
of the fonts a few days ago and was planning to gradually work
through them to pull out the dead/unwanted ones. I should have done
that before putting them to disc last time, but no... I wasn't
thinking.
4. once you have the fonts removed/deleted that produced
errors or warnings during the scan with your font management
program you might want to run the scan one more time just to be
sure you got everything out. If everything looks good, you can now
quit/exit the font manager.
5. here's where things will seriously divide for Windows
users and Mac users. Therefore, I'm not going to fully explain
where you need to go or how to get there for this step, but I will
provide the basics. On your computer, you need to find the folders
for fireworks that contain your preferences for the program (hint,
look in the user's appdata folders, which is hidden, for Windows or
the user's Library for Mac). Inside the preferences folder you'll
find a file that houses a list of fonts, probably called fontlist
or something very similar. Delete it. You might also wish to delete
the cache for the program preferences. Those need to be regenerated
in order for this to work.
6. Find your computer's font cache while you're looking
through the massive amounts of folders and delete the file there
too for a little added security that this will work.
7. restart your computer.
8. open Fireworks and create a new file. Save that file to
your computer in whatever format you want.
If the program opened, the file saved, and you didn't receive
that same old error message, congratulations, it worked! You may
have to re-establish your preference settings, but you shouldn't
have any other problems.
That is the best I can do this evening... or morning I
suppose it would be. Best of luck to you!
-Skip

djbroklee wrote:
> i'm on the struggle still, i've done the uninstall
reinstall thing,bought a
> font manager even though i don't go big on fonts,cleared
cahces,did
> regedits,you name it.
> the fight continues.
> as far as support from adobe they pretty much don't care
they got my thousands
> already this quarter.
> i'm thinking about a system restore now, pretty much
lost out on those last
> two days of pay and now that today is about over i have
nothing to lose if i
> can't get it fixed.
> anyone have any ideas out there?
> it's too bad i committed to adobe before accepting these
adobe type jobs.
> worst case i'll do the work on mirage until i can
finally get the quick
> background drop of fireworks again.
> i didn't pay thousands but it has never even hiccupped
no matter scripts or
> tasks i crammed into it.
> this fireworks issue sort of thing is what put me off
adobe in 2000, no
> support for issues,and wonky worksmanship.
>
> anyone have the answer thow it over to me,i could surely
use the catch up on
> getting paid thing right about now.
An update is being made to address some major problems, if
you hold
tight you might find a solution soon.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html
How To Report A Bug To Adobe
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

When I start my computer the following error: AppleSyncNotifier.exe Entry Point Not Found Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help

Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!

How I resolved the #-34506 error

Hi everybody,
I've often fallen on the -34506 error during encoding, but only with projects during around one hour.
Though I've found the suggestions on these pages useful (Check the chapter markers. Have lots of free space on the startup drive. Clearing caches. Deleting iDVD plist. etc.), they doesn't resolve my problem.
So here what I have done...
For projects during less than one hour, I simply swich from "best quality" to "best performance" but of course this is not the best way for who want the best result. In addiction I got the error even for project during 65 minutes where it was not possible to use the "best performance" setting.
I have completely RESOLVED the problem by adding twice the main movie in iDVD, and hiding somewhere one of the two title renamed with "." (which is simple to hide!)
This problem exists since previous versions of iDvd: when will Apple-mum resolve the bug?!
I really hope my experience and my trick be useful for anybody because I know it's very frustrating and annoying!
Bye
iMarc
PowerMac G5 Mac OS X (10.3.9)

Hi Simon,
I will try to explain in a better way, what I've done to resolve my problem.
I'll answer to your questions in the same order you asked.
- I add movie just dragging and dropping.
- The main movie is -for me- the one which is more length or important. It probably works with any kind of dvd content you want to replicate. I've done this only for increase the total lenght of the dvd, because I think that this is the nature of this iDvd's bug. I choose the "main movie" because I have no other contents that can be pertaining with my dvd, so, if someone can find its hidden link... he/she only will see the main content of the dvd!
- When you add the second instance of the "main movie", you will see in the current iDvd page another link with the same title of the movie you have just added. So, at this point, you will probably have two title that are the same. Choose one of them and rename it in iDvd. (I renamed it with "." and hidden over a graphic element which had the same color! I as well delated all its related menus too save time in encoding and not annoying anyone clicking on it).
Hope this clarify my trick, and sorry for my gapping english!
Good luck
iMarc

In trying to manage remote Linux-based Directory Servers with a NsDS 4.16 console running on NT 4.0 could a knowledgeable soul please explain the attached error? Thanks in Advance, Jeffrey

The error appears in a pop message and is as follows -
Cannot logon because of an incorrect User ID,
incorrect password or Directory problem.
HttpException:
Response: HTTP/1.1 500 Server Error
Status: 500
URL: http://152.80.1.1:3890/admin-serv/authenticate

Hi Jeffrey,
There may be a lot of situations where you would encounter such error. However, it is most likely because you have not changed you default Administration restrictions (ip and hostname). By default on DS 4.1x, the ip specified is the ip address of the DS' machine and the host name is your domain.
Therefore, if you change these restrictions to "*" (to begin with) and restart you Administration Server, then you should be able to have access to your Linux DS through your Windows Console.
An easy way to verify if the above error message is related to the Administration Restrictions is to:
-> start a web browser with http://<linux_machine>:<adminport> to try to access the HTTP Gateway. If you cannot reach that page remotely, then you are most probably encountering the issue I have mentioned.
Hope this would answer you question.
Cheers / Damien.

Using PreparedStatement and the Oracle Error ORA-1000

Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)

There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma

Minidv - the strangest thing I've ever seen

I started a thread last week asking if minidv was dead. I asked this because it appeared that my Panasonic minidv camera was broken and I wondered if I should make the move to a different format. Bottom line: There was no need to leave minidv at this point in time . . .just get another minidv camera and I'd be fine for the foreseeable future.
As a continuation of that discussion, I have encountered the strangest thing I've ever seen and I'm wondering if anybody can provide insight. I'll try to make a complicated story as concise as possible.
The reason I thought my Panasonic camera was in need of repairs was because large blue streak suddenly appeared across the screen when I played back or recorded video. This was not a problem with the tape, because I checked a few different tapes. In addition, these blue streaks showed up on previously recorded footage that looked perfectly fine when I dumped it to FCP a while ago.
So I bought a used Canon on eBay as a replacement. When I inserted a couple of tapes into the Canon, I saw gray streaks in the same manner I had seen blue streaks on the Panasonic. As far as I could tell, this meant one of two things: 1) there WAS a problem with the footage on the tapes, or, 2) both cameras were malfunctioning in a similar matter.
After an hour of going back and forth trying to isolate the problem, I decided to record some new footage on the Canon. When I did this, there were no gray streaks on playback of the new footage. Out of curiosity, I went back and looked at the previous footage that appeared to have gray streaks, and now the gray streaks were gone.
Wondering if some kind of miracle had happened, I took the tape out of the Canon and inserted it into the Panasonic. Still the same blue streaks on the Panasonic. Since recording a few seconds of new footage on the Canon seemed to be a miracle cure, I decided to try the same thing on the Panasonic. Voila! Blue streaks are gone. I tested other tapes . . .all blue streaks gone from the Panasonic and all gray streaks gone from the Canon.
If recording new footage on the Panasonic somehow magically realigned the heads or something, that should have fixed it last week when this problem first arose on my Panasonic. I tried all these same tests on the Panasonic and the blue streaks wouldn't go away on both newly recorded footage and previously recorded footage.
How is it possible that both of these cameras were working incorrectly in the same manner with several different tapes and then, simply by recording several seconds of new footage, they were miraculously healed? This is bizarre!!!
The only thing I did differently in all this troubleshooting was eat a banana. After that, things were fine. I say that half jokingly, but that is literally what I did. I took a break and at a banana, then 5 minutes later I tried exactly the same things and the cameras worked.
I guess I should be happy that both cameras are working now, but since I have no clue what the common denominator was that caused them to malfunction, and I have no clue how they both healed themselves, I'm worried about using them when I'm trying to record important footage.
Any serious thoughts about how this miracle has happened? (Yes, I know that user error is usually the next thing to consider, but I took very methodical steps to isolate the problem, so I really think the odds of that being the cause are very slim.)

Sounds like dirty heads to me....
I had a similar problem a few years ago. Weird streaks started showing up in my footage, so I used my friend's camera to figure out if it was a problem with the tape or my camera. I ended up transferring dirt from my camera to my friend's with the tape I was using. The footage was ruined, but I ran a head cleaning tape through both cameras and never had the problem since, although I haven't used MiniDV in a few years now.
Sounds like you did the same thing as me....meaning you're right twice: 1) the tapes had dirt on them, and 2) both cameras were having the same problem because the tape was dirty
it seems weird that recording new footage fixed the problem, but its possible that it cleaned the dirt of the heads (temporarily). I'd say buy a couple head cleaning tapes and you'll be fine....and maybe try eating more bananas

Whats the strangest thing about the Java platform?

Hello All,
In an interview (http://java.sun.com/developer/technicalArticles/Interviews/bloch_effective_08_qa.html) that I did with Joshua Bloch on java.sun.com, promoting the revised version of “Effective Java”, he discusses generics, enums, annotations, the under-use of Java libraries, the importance of minimizing the accessibility of classes and members and minimizing mutability, and other matters.
To my question: “What’s the strangest thing about the Java platform?” his answer was: “I'm going to say that the strangest thing about the Java platform is that the byte type is signed. I've never heard an explanation for this. It's quite counterintuitive and causes all sorts of errors.”
You also might be interested in checking out the lively discussion activated by the jsc QA
over here on the serverside: http://www.theserverside.com/news/thread.tss?thread_id=51624
Jan Heiss, writer for java.sun.com

DrClap wrote:
I liked how he said "What Not to Do" and then brought up java.util.Calendar. I always thought the idea of starting the months' numbering from zero instead of one was one of the most bizarre language design decisions ever made. But it made me think of the TV show "What Not to Wear". We definitely need Clinton and Stacy to show up in Calendar's apartment and send it out for a refit. (Although apparently that's actually happening in Java 7.)Isn't that a carry over from [C's struct tm|http://www.cplusplus.com/reference/clibrary/ctime/tm.html], where tm_mon (0-11) was the number of months since January?

While attempting to download and install LR/GMail 2.0 I get the following error: ./LRLib_SelfUpdateV2.lua:865: attempt to call global 'DBG' (a nil value).

I have been unsuccessful in my attempts to update LR/Gmail to version 2.0 and get the following error message, 'An Internal Error has occurred, ./LRLib_SelfUpdateV2.lua:865: attempt to call gloval 'DBG' (a nil value).

Hi Bibin,
Try to unplug, plug the AIM-CUE and settle down again. If it doesn't work, then most probably you should do an RMA.
HTH
Iber
If this helps, please rate

I get the following error when trying to watch a rented movie, "Anerror occurred loading this content".

Hi,
I get the following error message when trying to watch a rented movie, "An error occurred loading this content". Is this common?
Thanks,

It's common in the sense that you'll see this issue arise in the community from time to time, but in the context that the community is the place that users bring their problems it's probably similar to a broken shoulder which may be common at the hospital but not so common amongst the population that the hospital serves.
In many cases the problem can be solved by restarting the Apple TV (pull the power for best results) and/or restarting your router. Persistent problems may indicate a network issue such as interference locally or a slow download speed from your service provider. Try the restarts and see if that helps.

Windows could not finish configuring the system error after sysprep /generalize

Hi
I just installed Windows 7 Ultimate RTM off from technet and as always I do make use of WIM images on having them deployed to my home PC's
I was able to have it installed on a clean machine and once the wizard appeared i immediately entered Audit mode (shift+ctrl+f3) and the usual I loaded all of the software i need to pre-install after I was done I Immediately loaded sysprep and had it with the generalized option
now this is where the problem begins....... after it restarts during the "Setup is starting Services" screen it gives me a message box error saying "Windows could not finish configuring the system. To attempt resume configuration, restart the computer" and once I press ok it jsut restarts and gives the same error again.
This does not happen when i dont select the generalize option in sysprep.
Anyone who had the same issues?

I now have the ACTUAL SOLUTION to this problem. This solution will actually tell you exactly what registry key is causing your sysprep to fail, so then you don't have to slowly install
every program until you find the problem -- especially since this didn't work for me because my problem has been intermittent.
This issue is caused by certain registry keys that are either:
a) Larger than 8kb
b) Set with incorrect permissions
c) Corrupt in some way
For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupt sometimes) so it was impossible to tell what program was doing it. Luckily, there is a log you can look at that will tell you
exactly what registry key is erroring out. Here are the steps for getting the log you need to see:
When you see the error message, do the following:
1.) Push Shift+F10 to get to a command prompt
2.) Navigate to C:\windows\Panther
3.) Find the Setup.etl file and find a way to copy this file off of the system (I copied it to the D:\ partition and used Ghost to gather that partition and get the file off)
4.) Copy the setup.etl file from the corrupted system to another computer that has Windows 7. Put it on the root of C:\ for easiest access.
5.) Open a Command Prompt on the Windows 7 computer.
6.) Navigate to the root of C:\ (or wherever you saved the file)
7.) Type "tracerpt setup.etl -o logfile.csv"
8.) Close the command prompt and open up logfile.csv in your text editor of choice.
9.) Look through the log file (towards the end probably) for messages that say "Failed to process reg key or one of it's decendants" For me, the exact eror looked like this: "Failed to process reg key or one of its descendants: [\REGISTRY\MACHINE\SOFTWARE\ESET\ESET
Security\CurrentVersion\Plugins\01000200\Profiles\@My profile]" If you search for "reg key" or "failed to process" you should find the failure.
10.) Remove this software from your image, or find out how to get the registry key that is failing to work properly.
After this, you should be able to properly identify any problem keys and remove/workaround them on your image.
I see this post is about a year old at this point, but after searching the internet for weeks, I had high hopes for this solution. It seemed to go well, but the logfile.csv doesn't have the word "fail" in it anywhere...no "reg key", nothing. Did a sysprep
install with an unattend.xml answer file that seems to be working properly, but hangs at "Setup is starting services." forever.
At this point, I'm pretty convinced that the problem is a service or reg key error from one of the apps I installed during audit mode, but I can't tell which app/service is causing the problem.
Are there any other methods for viewing failed services or registry errors that would cause the sysprep install process to hang at "Setup is starting services."?
Willing to post logfile.csv from the "tracerpt setup.etl -o logfile.csv" command, or other log files such as setupact.log, etc. Nothing popped out at me.
For now I think I'll start making multiple .wim files with only certain software installed to try to discover which application is the culprit...just wish there was an easier way.

Is the Unknown Error 1604 being addressed? (!!)

Is this error being addressed at all?!
I've gotten it for the second time now and had to send it to Apple Store AGAIN for help. Cause it won't turn back on again. Just says "plug me into itunes".
I know several other friends of mine who've gotten the same error and...well, suddenly after some days and after a lot of differen't tries. It all of a sudden works again.
This error is just mindblowing. Why is the only choice I get after installing to "reinstall and update" ..why not reinstall and NOT update?! The update is what is causing the frigging problem. This error MUST be well known, yet it's not..cause when I try to search for the UNKNOWN ERROR 1604...there's nothing to find. Why is this?
I've not just spent over 10 hours trying to fix this, but I end up having to send it to Apple Store for the second time and they will probably send it back again and say..."hey, there's nothing wrong with it, but we had to reinstall EVERYTHING" (!?) There IS something wrong when you have to reinstall everything!
Doesn't seem like Apple is addressing this issue at all even if there's a lot of people having trouble with it.
Message was edited by: MiniMooseApple

If the Apple Store is simply restoring the phone and giving it back...I would point to your computer as the culprit here...
Are you updated to all current service packs? Not plugged into any USB hub and directly connected to the BACK of the computer?
I would start with your computer as the culprit and work from there. It also may be something as simple as a bum cable.

Probably the strangest error

Similar Messages

Maybe you are looking for