Problem about lightbox with tooltips

I create a slideshow. There is lightbox on a slideshow. I want to create 6 tooltips in the lightbox but other slideshow will show tooltips after I drag tooltips on the lightbox. I want to show 6 tooltips which are only in one slideshow. How to do it? Thank You very much!!!!!

Similar Messages

Problem about Communication with Bluetooth

Hi all!
I want to use a PC host to communicate with a mobile phone with Bluetooth technology. In details, the mobile phone wanting to know some informaiton about "news of today" firstly send a message to my PC, then my PC have to response with a reply message to that client mobile phone. It seems that I should use Java programming with J2SE to control the communication through Serial Port. Is it right? I want to overview some Java sample code about this topic so that I'm able to know the general manipulation. Thanks very much! : )

Hi,
Under J2ME you can use the JSR82 but only for compiling and then port the application on the mobile device. The source is not implemented.
There is free APIs java that you can use www.javabluetooth.org
Let me know if it works with you, I am going to begin next week...
Sihem ;)

Problem about NetGroup with Cirrus

Hi guys, I try to setup NetConnection and NetGroup following the example code in tutorial "Peer-assisted networking using RTMFP groups in Flash Player 10.1" ( http://www.adobe.com/devnet/flashmediaserver/articles/p2p_rtmfp_groups.html ) but have got some problems. No matter how many node I connect to the same netgroup, estimatedMemberCount and neighborCount is always 1 and 0. I can receive NetConnection.Connect.Success and NetGroup.Connect.Success event and calling NetGroup.post does return a vaild id but still, nobody could receive a NetGroup.Posting.Notify. Any idea what may be wrong or missing ? Thanks.

I have the same problem... what do you mean with "wrong version of playerglobal.swc"? Thanks

Some problem about FCoE with N7000

Hello every one !
     I`m a Network guy and I think I`m a fresh for storage. I`m config a FCoE link on Nexus 7000,but there is something wrong and I need some help from you !
==============================================================================================
     Problem:
         1. I can built a storage VDC , but I can`t enable " feature fcoe " , but "feature-set fcoe" is okay
         2. when cheak interface status ,It appear :
xxxxxxxx# show int e3/39
Ethernet3/39 is down (Internal-Fail errDisable, fcoe_mgr: ethernet interface module is not licen)
===============================================================================================
         my software version is 6.1.2 and line-card is N7K-F248XP-25E ,and is my license:
xxxxxxxx# show license usage
Feature                      Ins Lic   Status Expiry Date Comments
                                 Count
MPLS_PKG                      Yes   -   Unused Never       -
STORAGE-ENT                   Yes   -   Unused Never       -
VDC_LICENSES                  No    0   Unused             -
ENTERPRISE_PKG                No    -   Unused             -
FCOE-N7K-F132XP               No    0   Unused             -
FCOE-N7K-F248XP               No    0   Unused             -
ENHANCED_LAYER2_PKG           Yes   -   In use Never       -
SCALABLE_SERVICES_PKG         Yes   -   Unused Never       -
TRANSPORT_SERVICES_PKG        Yes   -   Unused Never       -
LAN_ADVANCED_SERVICES_PKG     Yes   -   In use Never       -
LAN_ENTERPRISE_SERVICES_PKG   Yes   -   Unused Never       -
=================================================================================================
It is a license problem ? Please help me ,Thanks Very much!

Please confim below things.
1. On the switch make sure that fcoe feature-set is isnatlled -
install feature-set fcoe
2. Make sure that, you have allowed fcoe feature-set for the storage vdc
conf t
vdc
allow feature-set fcoe
3. Make sure that the module you are using is licensed for FCoE
conf t
license fcoe module
Hope this helps.
-Ganesh

The problem about inputDate with pattern specified for 24h time.

Hi all,
i want to use pattern specified for 24h time for inputDate,
format mask like:yyyy-MM-dd HH:mm:ss
at runtime,the inputDate value is :2011/09/27 22:05:59 ,
but the value is 10:05:59 in Calendar Dialog.
then click OK button,the inputDate value becomes :2011/09/27 10:05:59.
This is normal?
thanks in advance.

Hi,
Did you try as follow,
using <af:convertDateTime>
<af:inputDate >
<af:convertDateTime pattern="yyyy-MM-dd HH:mm:ss"/>
</af:inputDate>See
http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_convertDateTime.html
http://blogs.oracle.com/Didier/entry/how_to_specify_a_second_date_p

Problem with tooltips and spry data using startLoadInterval

I am trying to use tooltips with a dynamic table using the spry data example at the bottom of the page:
http://labs.adobe.com/technologies/spry/articles/tooltip_overview/index.html
I have it working except that it appears to have a memory leak as firefox's memory usage continues to grow.
I did notice there is a 'new' inside the onPostUpdate:function that is being called on every table update.
So after looking at the tooltip code I modified the function to:
<script type="text/javascript">
var tt1;
var observer = {onPostUpdate:function(){if(tt1 == null){tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}else{tt1.destroy(); tt1.destroy();if(tt1.checkDestroyed()) alert("destroyed");else alert("not destroyed");delete tt1; tt1 = new Spry.Widget.Tooltip('tooltip','.trigger');}}}
Spry.Data.Region.addObserver('mainRegion', observer);
</script>
The tt1.checkDestroyed() always returns false and my memory usage continues to grow.
Any help?

Thanks for the reply. I found a way to get it to work by changing my
observer function to the following:
else{tt1.destroy();
tt1.init('.trigger', 'tooltip',
{});tt1.attachBehaviors();Spry.Widget.Tooltip.loadQueue.push(tt1);}}
Probably not very clean but it doesnt grow memory and works correctly.
I just put it back to the old way as in the example with a
startLoadInterval(1500) :
And I am over 500MB after ~ 30 minutes where as the top code above ran with
a startLoadInterval(1500); overnight and is about ~120MB.
I am using a double repeatchildren loop to build a table with tooltips for
each cell which may affect it.
Bottom line is I have a way to make it work so I am moving forward. If you
still want to see it I might be able to get it up on the internet and give
you a link.
Thanks,
Greg Wirth

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Problem with tooltip

Hi all,
I have a problem with tooltip:
1. In Explorer 7.0 when the text is too long, the tooltip is trancated.
2. In Explorer 6.0 in the same case the tooltip is not trancated, but is flickering.
How can I solve it?
Any ideas?
Thanks,
Michael Beilin

HI
try to create a context and bind it to the tootip property and set the context values with the text you need
and check whether it works .
Thanks

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

HT1414 It has some problem about my iphone. When I turn off the phone and then turn on, it shows the screen of apple page and then show the loading page many times. What happen with my iphone?

I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?

Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore

I have already update to iOS 6.1 on my iPhone 4. I have a problem to sync with the iTunes. I cannot backup, sync and transfer purchases from the iTunes. I can only restore the backup. Anyone has any idea about it?

I have already update to iOS 6.1 on my iPhone 4. I have a problem to sync with the iTunes. I cannot backup, sync or transfer purchases from the iTunes. I can only restore the backup. Anyone has any idea how to solve this problem?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

Help! problem about jstl sql with "LIKE?" in query

Hi All,
I have a problem about getting data by using "LIKE" in my sql statment.
here is my case:
<sql:query var="tmp">
SELECT ...... FROM ...
WHERE a LIKE ?
<sql:param value="%${param.a}%"/>
</sql:query>
Once I used "LIKE" keyword, the query failed to use this critica.
and couldn't find any match cases
thx or help
Micheal

besides, i found that:
this works:
"AND a.block LIKE '%' + 'a' + '%'"
but these don't work:
"AND a.block LIKE '%' + 'a' + '' + '%'"
or
"AND a.block LIKE '' + '%' + 'cp' + '%'"
or
"AND a.block LIKE '%' + 'cp' + '%' + ''"
it seems '' is the casue of error... so strange, anyone has idea?
micheal

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

An old and difficult problem about "UnsatisfiedLinkError"

Hi dear all,
I have been struck with the problem about "UnsatisfiedLinkError". I have a c++ class HelloWorld with a method hello(), and I want to call it from within a java class. In fact, I have succeeded in calling it on the windows platform. But when I transfer it to linux, the error "UnsatisfiedLinkError" comes out. I have tried to take the measures as Forum has suggested, but it failed.
The source code is very simple to demonstrate JNI.
"HelloWorld.h"
#ifndef INCLUDEDHELLOWORLD_H
#define INCLUDEDHELLOWORLD_H
class HelloWorld
public:
void hello();
#endif
"HelloWorld.cpp"
#include <iostream>
#include "HelloWorld.h"
using namespace std;
void HelloWorld::hello()
cout << "Hello, World!" << endl;
"JHelloWorld.java"
public class JHelloWorld
public native void hello();
static
System.loadLibrary("hellolib");
public static void main(String[] argv)
JHelloWorld hw = new JHelloWorld();
hw.hello();
"JHelloWorld.cpp"
#include <iostream>
#include <jni.h>
#include "HelloWorld.h"
#include "JHelloWorld.h"
JNIEXPORT void JNICALL Java_JHelloWorld_hello (JNIEnv * env, jobject obj)
HelloWorld hw;
hw.hello();
All the files are in the same directory and all the processes are under the dirctory:
1. javac JHelloWorld.java
2. javah -classpath . JHelloWorld
3. g++ -c -I/usr/java/jdk1.3/include -I/usr/java/jdk1.3/include/linux JHelloWorld.cpp HelloWorld.cpp
4. ld -shared -o hellolib.so *.o
5. java -cp . -Djava.library.path=. JHelloWorld
Exception in thread "main" java.lang.UnsatisfiedLinkError: no hellolib in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at JHelloWorld.<clinit>(JHelloWorld.java:7)
Tried another measure:
i) export LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH
ii)java -cp . JHelloWorld
The same error came out as above.
I really don't know what is wrong with it.
Would you like to help me as soon as possible?
Thanks.
Regards,
Johnson

Hi Fabio,
Thanks a lot for your help.
It is very kind of you.
Regards,
Johnson

Problem about lightbox with tooltips

Similar Messages

Maybe you are looking for