Problem adding IBMtape and TS3200 fibre library to solaris 10 sunfire 280R

Hi,
I have IBM TS3200 Fibre library and I’m having problems to connect it to my solaris 10 (and TSM) there is nothing in under /dev/rmt ??
Information:
SunOS tsm 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
HBA Model          : QLA2310
Driver Version     : qlc-20080514-2.28
FCode Version     : 1.14.09
Firmware Version     : 3.03.27 IP
There are 2 drivers and one changer and bout are seen by hardware:
cfgadm -o show_FCP_dev -al
Ap_Id      Type Receptacle Occupant Condition
c3           fc-fabric connected configured unknown
c3::2002000e11116daf,0         tape         connected    configured   unknown
c3::2002000e11116daf,1         med-changer connected    configured   unknown
c3::2008000e11116daf,0         tape         connected    configured   unknown
c3::500601603a201211,0 disk connected configured unknown
c3::500601603a201211,1 disk connected configured unknown
c4           fc-private connected configured unknown
c4::210000203784c0ff,0 disk connected configured unknown
c4::210000203784dff0,0 disk connected configured unknown
I have installed the IBMtape as in IBM documentation is instructed.
All commended out in st.conf, mt.conf and lb.conf.
st driver is not loadet. (rem_drv st)
there is in /devices entrys like this: (du -a /devices)
2 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1
0 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1:changer
What is sgen@??
So the hardware sees the library but the os dos not compute… any idea how to get the drivers working and something under /dev/rmt?

You could experiment with giving OBP the absolute path to that USB device, but I doubt you'll be successful. The Sunfire 280R (same hardware as the Sunblade 1000, Sunblade 2000, and Netra 20) design expected USB to be only for keyboard and mouse, not for any storage devices. If booting ever works manually from a USB stick, then you could create a custom alias for the device.
Try an experiment by using a CD or DVD of an older release of Solaris 10 instead of the current release.
[http://www.sun.com/software/solaris/releases.jsp|http://www.sun.com/software/solaris/releases.jsp]
The earlier ones need fewer hardware resources. I also recall a few forum posts that seem to suggest the bootblock structure on the CD's and DVD's of those earlier releases was more compatible with older hardware.
You might also need to get yourself a copy of the OBP 4.x Command Reference Manual, document No. 816-1177
[http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf|http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf]

Similar Messages

No longer able to use previous method for adding tracks and orginizing my library :(

I use to add a few mp3's to my library then sort the library by date added to see the just added tracks at the top [most recent] of that view, well that don't always work since itunes 11. Can anyone explain please? or even offer an alternate method? I know there is now a folder named "Automatically Add to iTunes" is it absolutely necessary that I use that folder? If it is that odd because not everyone is as gifted as I {NOT!} and they might not be able to locate the folder.
thanks
Fredy

You can restore much of the look & feel of the previous version with these shortcuts:
CTRL+B to turn on the menu bar.
CTRL+S to turn on the sidebar (your device should be listed here as before).
CTRL+/ to turn on the status bar.
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour.
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store anduntick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may allow iTunes to start up quicker).
Use the Songs view and enable (if necessary) the Date Added column, then sort in descending order. Alternatively you could use the Recently Added smart playlist to view your imports.
tt2

Safari pdf printing problem- adding spaces and characters to doc

when I print some pdf documents, spaces and charactors are added. the document looks fine on the screen and prints fine directly from Adobe Reader. the problem is with Safari and Adobe plugin. same results on 10.4 and 10.3 machines. do not have this problem printing from Firefox. any suggestions
thanks, david
G4 Mac OS X (10.4.5)

Hi,
I would appreciate any comments.
Thanks

Problem adding columns and rows in JTable

hi, hope somebody can help me
i have some problems when i add columns and later i try to set number of rows in JTable, ocurr some exceptions
my code is something like thisJTable tabla = new JTable();
TableColumn tc = new TableColumn();
tc.setHeaderValue("col1");
tc.setPreferredWidth(20);
tabla.getColumnModel().addColumn(tc);up to here everything goes well, my table shows the column, but when i add this line((DefaultTableModel)tabla.getModel()).setNumRows(1);ocurrs the next exception
Exception occurred during event dispatching:
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0....
any ideas????

oks, that would work when the JTable is created, but now we say that I require a method which adds a new row to the JTable a some moment of execution
Look some of my code
i have this in a JFrame...
JTable tabla = new JTable();
DefaultTableModel tm = new DefaultTableModel();
tabla.setModel(tm);
agrCol("Col1", 80);
agrCol("Col2", 160);
agrFil();
agrFil();
agrCol(String col, int lon) {
tm.addColumn(col);
tabla.getColumn(col).setPreferedWith(lon);
agrFil() {
tm.setRowCount(tabla.getRowCount() + 1);
the jtable shows the 2 columns and 2 rows, but the setPreferedWith work only in the last col, i'm confused

Problem adding large video files to library

When I try to add large video files to my library. It doesn't work. No error message or anything. It just doesn't happen. The file I'm trying right now is 2.65 GB. I've had no problem with video files around 400 MB.

What format is the video in? iTunes is unfortunately silent when you try to add a video or song that Quicktime can't decode.

Problems with margins and borders in a fluid grid layout

When I create a page using the built-in fluid brid layout option in Dreamweaver CC, I have problems adding margins and borders. to the elements I've added to the page.
Is there a method to prevent the above occurring?

Hi Ken
I'm sizing each element to specific grid sizes and, working in the "show fluid grid layout guides" view am aligning the second element alongside the first by click the "up" arrow. e.g.:
I'm using a 24 grid layout (mainly because I thought it would allow more flexibility when working on two or three column layouts)
I have the first element 10 grids wide (41.348% wide) and the second element 14 grids wide (56.9% wide)
I've populated the first element with text including an h2, h3 and p element
In the second element I've inserted an EasyRotator slideshow
The third element is below the first containing text . That is also 10 grids wide
The fourth element also contains text and is 9 grids wide and has margins of left = 8% and right = 7% so that it appears below the gallery and it has a border around it.
The problem occors when I try to place a border around the element containing the EasyRotator. When I do, it become too large and drops below the first element.
How can I control this problem?
Thanks in anticipation.
David
P.S. Can you recomment any tutorials that provide info on the above.
I'm subscribed to Lynda.com, have searched adobe TV and looked at all the tutorials that are provided through Dreamweaver CC Help.
Nowhere can I find the above subject covered.
I'd like to find a tutorial which also provides exercise files to work with if possible.

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says that movies I add are in library.Which I cant add

HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says "feature films and home movies you add to itunes appear in movies in your iTunes library. To play a movie, just double click it". And below are two options for Downloading movies from store and rent movies. Please help.

I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

Zen Touch - Problem adding and deleting fi

I got a zen touch, plug it in the pc and the zen says 'docked', the computer says found zen etc. I open the zen in My Computer, click on the music library, it opens, all of my music is displayed as normal but when I try and delete a track/album etc, it says 'cannot be deleted, try agin later' or something like that.
When I try and add files it says, 'a problem has occured and action cannot be performed' or something like that.
Can anyone tell me why? I have added 5GB of music on it without any problems, I have deleted music off it, there is definately enough space left, the computer recognises it ok, the zen recognises it has been connected but it won't let me do anything?
I have tried reinstalling everything for it over and over. Only a couple of days ago I added more music to it and it was fine and now it is telling me this?
HELP!! Its driving me mad.:angry:

I just tried it again now and it is working fine!!
Can anyone tell me what is going on inside the zens head?:smileyindifferent:
willbill0587 wrote:
I got a zen touch, plug it in the pc and the zen says 'docked', the computer says found zen etc. I open the zen in My Computer, click on the music library, it opens, all of my music is displayed as normal but when I try and delete a track/album etc, it says 'cannot be deleted, try agin later' or something like that.
When I try and add files it says, 'a problem has occured and action cannot be performed' or something like that.
Can anyone tell me why? I have added 5GB of music on it without any problems, I have deleted music off it, there is definately enough space left, the computer recognises it ok, the zen recognises it has been connected but it won't let me do anything?
I have tried reinstalling everything for it over and over. Only a couple of days ago I added more music to it and it was fine and now it is telling me this?
HELP!! Its driving me mad.:angry:
willbill0587 wrote:
I got a zen touch, plug it in the pc and the zen says 'docked', the computer says found zen etc. I open the zen in My Computer, click on the music library, it opens, all of my music is displayed as normal but when I try and delete a track/album etc, it says 'cannot be deleted, try agin later' or something like that.
When I try and add files it says, 'a problem has occured and action cannot be performed' or something like that.
Can anyone tell me why? I have added 5GB of music on it without any problems, I have deleted music off it, there is definately enough space left, the computer recognises it ok, the zen recognises it has been connected but it won't let me do anything?
I have tried reinstalling everything for it over and over. Only a couple of days ago I added more music to it and it was fine and now it is telling me this?
HELP!! Its driving me mad.:angry:

I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
I tries and it doesnt work!!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How do I restore my iPhoto. When I open i get a window dialog "Your iphoto library is either in use by another application or has become unreadable shut down and restart your computer. If problem persists, try rebuilding your iphoto library. To do th

When I try to open iPhoto I get a window dialog that says...
Your photo library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have tried the reopen it while keeping the Option and Command keyes pressed.
No change.
I dee nothing but a blank page,
Any help would be appreciated.
Also hace back ups of all images on cd's. dvds and jump drives.
Any advice is appreciated.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

I've added songs and vedios to iTunes in my computer then I synchronise it with my iPad the problem came to the video that I couldn't show the videos and the screen became black

I've added songs and vedios to iTunes in my computer then I synchronise it with my Ipad3 ..... For the songs it was OK but for the vedios I got a message that some format are not supported then the screen became black with no video or sound ....how can I get back the vedios...I'm afraid to make reset to the iPad otherwise I'll loose all the applications and media.. Any ideas please .... Thanks

First of all - depending upon how you define resetting the iPad - you will not lose anything. If you erase all contents and settings - then you will lose everything. Don't do that!
If the videos are not in the correct format - launch iTunes on your computer. Click on one of the videos in your iTunes library in order to select it. Then go to Advanced>Create iPad or Apple TV version and see if the video will convert. Do the same for the other videos and then select those to sync again with the iPad.
To get the videos app working again, first quit it completely and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If the videos app still doesn't work, try this.
Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. when the movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

You have to buy iPhoto from the Mac App Store.

Problem adding IBMtape and TS3200 fibre library to solaris 10 sunfire 280R

Similar Messages

Maybe you are looking for