Problem connecting to a wireless network

I am using 'Aztech' wifi router/ADSL modem for wireless network at my home. I had been connecting fine with the internet using it until yesterday, when, after a software update, I have been unable to connect to the network (I can access it with my wife's laptop, an acer running windows XP). I tried reconfiguring the connection, reconfiguring the settings of the wifi router and even reinstalling the software, but without any positive results.
The current situation is: I can see the network in the list but when I try to connect using the correct password, I keep getting the message "There was an error joining the Airport network '(Network Name)'".
(I have no problem connecting via the cable)
Help me out please...
Mac Book 2.0 GHz Mac OS X (10.4.8)

I had the same problem with my Macbook after the update. It will no longer connect to my router using WPA-PSK authentication. It did work for me after changing my security settings back to using WEP authentication.
I have not been able to figure out the reason for this but this may help get your Macbook back on the internet for now.
Macbook Mac OS X (10.4.8)

Similar Messages

Problem connecting laptop to wireless network

Greetings.
I recently installed ArchLinux on my asus N80Vb laptop. I downloaded the .iso for the core installation and burn a CD which I used to install. Checksums were a match. I followed instructions on the installation guide and everything seems to have been a success. I installed all packages which seemed to have anything to
do with wireless networking.
The only problem is that I am having difficulty getting my laptop to connect to the wireless network in the house.
The network wireless interface in the laptop is an Intel WiFi Link 5100. I am assuming the driver is loading properly: output from dmesg | tail is:
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
wlan0: Selected IBSS BSSID 2e:xx:xx:xx:xx:xx based on configured SSID
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
(the x's in the second line are because I wasn't sure if it was a good idea to post the actual numbers).
I followed the manual wireless setup process <a href="https://wiki.archlinux.org/index.php/Wireless_Setup#Part_II:_Wireless_management">here</a> to try to establish a connection and couldn't connect: trying to ping www.google.com gave an unknown host error.
I have netcfg and created a configuration file with the following:
CONNECTION='wireless'
DESCRIPTION='wireless internet connection
INTERFACE='wlan0'
SCAN='yes'
SECURITY='none'
ESSID='mynetwork'
IP='dhcp'
CHANNEL='6'
When trying to use netcfg I get "Wireless network "mynetwork" not present. [FAIL]
Using iwlist doesn't show <i>mynetwork</i> either, but I know its there because all the PCs, a wii and another laptop are all connected to it without any problems.
(I added CHANNEL='6' because my PC running Fedora shows that it is connected to mynetwork on channel 6, so I thought maybe...).
Connecting via a wired connection is also a possibility but would prefer not to.
Any suggestions?
Regards,
Topaz

ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:21:5D:2E:B1:CC
inet addr:192.168.0.103 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
iwlist wlan0 scan:
wlan0 Scan completed :
Cell 01 - Address: 22:CB:4E:FF:34:B1
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=29/70 Signal level=-81 dBm
Encryption key:on
ESSID:"walker"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000001fb84a6f00a
Extra: Last beacon: 2816ms ago
IE: Unknown: 000677616C6B6572
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD090010180201F4000000
Cell 02 - Address: 00:1E:58:C7:D8:03
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=25/70 Signal level=-85 dBm
Encryption key:off
ESSID:"DLinkVWR"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000008a03f670c
Extra: Last beacon: 3026ms ago
IE: Unknown: 0008444C696E6B565752
IE: Unknown: 010582848B962C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 32080C1218243048606C

Problems connecting to BTFON wireless network

Hi all
I have been connecting to the internet through BT FON for almost a month now but without warning I lost access to the network. Whenever I attempt to connect, it says - Limited or no connectivity and I've noticed that when I attempt to repair the connection it hangs as it fails to renew my IP address. The error message is: failed to renew your IP address. For some reason I've lost connection with the server.
Is the problem with my laptop? Is there a way to fix this?
Thanks

Thanks for your response Riad but my issue is still my issue is still unresolved. I've been trying different locations for the past month without any luck. Everytime I try to connect it returns as "Limited or No Connectivity". I am able to connect to other wireless networks with ease. I am not whether its a settings issue or not.
This bothers me because I still have quite a bit of unused credit in my Fon account. I was browsing happily one minute and the next it just disconnected and hasn't been up since. I checked the map for coverage and it still shows that on my street there are 4 or 5 people with hubs.
Confused!

Problem connecting PC to wireless network

I am running Airport express and last week I set it up so I required a password - WPA with a network key. I have never had trouble connecting my mac. The day I set it up, I was able to connect my PC to the network - it asked me for network key, and voila it connected. Today I am connected on my powerbook but the pc won't recognize the wireless network. When I try to "repair" the wireless network connection it says windows could not finish repairing because it could complete connecting to the wireless network. Yes, I know this. So why won't it connect? When I "view available networks" on the pc, nothing shows up, but when I click on "change the order of preferred networks" my network is there. I check the properties and it even has the saved network key. I am at a loss, and unfortunately not too savvy with this type of thing. Any help would be appreciated.

Sorry for wasting anybody's time...the radio switch was on off on my PC. All is working now...

Need help connecting to BEFW11S4 wireless network

A friend I visit often has a BEFW11S4 router. Other friends who visit connect immediately to the unsecured wireless network. Unfortunately, for unknown reasons I'm unable to connect with either of my laptops, so have to plug in the LAN. This is the only place I've ever had a problem connecting to a wireless network.
My laptops are Toshiba Satellites, running Windows XP Home & Office, respectively. Sometimes they won't even recognize the network, or when they do, just won't connect. I've gone through the tutorial and all settings numerous times, turned off the firewall, turned off Norton and still no luck. Any help getting me connected is appreciated. Thanks.

In your computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete any existing entry for your friend's network. Reboot your computer. Return to "Preferred Networks" and add your friends SSID. Then select this SSID and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should login automatically when computer boots up.
Hope this helps.

My 15" macbook pro have big problems identifying and connecting to my wireless network

my 15" macbook pro have big problems identifying and connecting to my wireless network. I have no problem connecting to my neighbour´s. Also I have a 13" macbook pro, a 13" macbook, 2 ipads and 3 iphones (3, 4 and 5) and none of these have any problems connecting to my wireless. My 15" is running Mac OS X 10.7.5, has a 2.66 GHz Intel Core I7 proc and 8 GB Ram

Hi Frodey,
Thanks for using Apple Support Communities. This article has steps to take to troubleshoot connecting to a wireless network and may help:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
- Ari

My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?

What am I missing here. I'm sure it is some kind of sitting that is not right.
Thanks Pat

Sounds familiar:
lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?
Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?in response to Patricia Isaac1
Power off and then back on the router
What happens when you enter the network's PW?
Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
Csound1 wrote:
Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

MacBook Pro cannot connect to a wireless network

I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.

OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

Problem with Skype and Wireless Networks

I have been having a problem with Airport for about 10 months. Long winded explanation follows.
Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

Hi there
Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
64 bytes from 10.10.10.1: icmp_seq
and so on.
After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

Problems Setting up my wireless network with an Xb...

Hi, I have had some problems setting up my wireless networking.
I have everything switched on and am able to go online with the laptop and the Xbox with no problems but when I try to share media with the xbox I have problems.
I have opened the ports specified in the setup from xbox on windows firewall and have no problem connection Via Ethernet cable but when using wireless the xbox cannot detect the laptop.
I have checked the network map and both xbox and laptop are connected and have enabled sharing and am running sharing software.
Below is the network map.
I have also been having problems with BT software, the free virus protection will not install, The desktop help will not launch although it shows up on task manager and the installation disk does not launch correctly it doesn't get past the loading screen.
I have had a printer on the wireless network and had no problems printing.
If anyone knows how to resolve this please help.

I have this same Motorola modem and I just verified that my 802.11n AirPort Express Base Station (AXn) can get Internet access with this modem without any issues.
When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

Upgraded 4s to iOS8 and can't connect to certain wireless networks anymore

I have an iPhone 4s that I updated to iOS 8. Prior to update, I was using iOS 7 (whatever the latest iteration was), and was able to connect to various wireless networks. Following the update, I am no longer able to connect to the wireless network at my place of work. It tries to connect, does so briefly, and give me an authentication request (screenshot attached). Blank username/passwords don't work, neither does the network name/password combo. Choosing cancel will revert the connection back to 3G.
To try and fix the problem, I have "forgotten" the connection, re-started the phone, and neither has worked I have reset my network connections, and it worked immediately after the reset. The phone was inactive for a while, and upon unlocking, it had reverted to 3G. When I tried to re-connect, it gave the same errors already stated.
I no longer have a back-up from before the upgrade, so I can't go back to 7. My wireless connection on my home network is fine. Nothing has changed with the work wireless since it was working with my iOS 7. It uses a WPA-Personal security, and there are several repeaters for the signal throughout the building.
What is going on and how can I fix it?
http://www.pinterest.com/pin/create/extension/

Set it up as new device, make sure all the apps are updated in the iTunes library and try to use iTunes to restore it again from the latest backup:
iOS: How to back up your data and set up your device as a new device

IBook has stopped connecting automatically to wireless network

I just got my iBook back from repair at Apple (a display problem), and now I have two minor, but annoying, problems. First, the computer no longer automatically connects to the wireless network at my work, but every time the computer goes to sleep or I restart it I have to pull down the AirPort menu and select the network to join. I don't have to enter a password, I just have to select the network on the menu.
The second problem is that I used to have the computer log me out whenever the screen saver came on (after 15 minutes) so if I left my office for a while nobody would be able to access it without the password. This isn't working now and I don't know how to change it.

Hi, I have tacked on to this thread as I have the same problem... I can't connect and have get the spinny ball when I try to open internet connect.
This happens every time I update, and I too usually fix it by updating the keychain. However, this time the box only popped up as I was restarting and i couldn;t click it in time, and it hasn;t reappeared since.
How can I fix this?

MacBook Pro will not connect to Cisco Wireless Network

I have just bought a brand new MacBook Pro, running Leopard (OSX 10.5.1) and I just cannot get it to connect to the Wireless Network at my workplace.
The MBP connects to wireless network and authenticates just fine, but will not obtain an IP address from the DHCP server.
The wireless network consists of 16 Cisco Aironet 1200 Access Points controlled by a Cisco Wireless Network Controller. It does not broadcast its SSID and is WEP 128-bit hex protected.
Changing the network from WEP to WPA is out of the question for me as this is under the control of my customers IT Department and they do not have any problems with their PCs connecting to the network. It appears to be an Apple issue.
For reference, my old Vaio PC, my Nokia N95 and my iPod Touch ALL connect to the same wireless network without any problems whatsoever, first time, every time!
If I boot into Windows XP from my Boot Camp partition, XP can connect wirelessly to the network without any problems, so it is not MacBook hardware related...
It has to be a bug in Mac OSX... doesn't it?!?
Things I have already tried (following suggestions on many forums):
* Switching Airport off/on
* Deleting various network-related Plist files and rebooting
* Manually assigning an IP Address (not really permitted but doesn't work anyway!)
* Disabling all network adaptors except Airport
AP Grapher shows that the MBP is connected to the wireless network, at good strength, and packets are being sent and received, but Internet Access is not possible as no IP Address has been assigned. Instead, my MBP shows a 169.* IP Address (self-assigned). It should be a 10.1.255.* address.
Can anybody please help? Thank you.

i posted this same reply elsewhere because it worked for me for my Buffalo wireless router: try manually setting your IP address instead of relying on DHCP, which sometimes (I don't know why) doesn't work well with Macs. It's a good get around. I am a happy Mac user but nothing is perfect on earth, and when the Mac gives problems, it does give a lot of frustration. Macs are not as easy to troubleshoot as Win because a Mac is built to be user friendly(and it works most of the time), meaning a lot of the background computing stuff is hidden away from users to avoid user accidentally upsetting some settings.
Unfortunately, the highly automated troubleshooting wizards provided by OS X are not perfect so when these software wizards fail to resolve the problem, like my Network Diagnostics, I have to spend more time tinkering around. There's "Terminal" of course but then most of us, especially PC converts to Macs, don't know how to use it.
You should also try updating your MBP, see if there are any new updates being released.

"connection timed out" when connecting to outside wireless networks

I have had trouble connecting to some wireless networks. I have no problem at home, at various cafes and such, nor at work. Some hotels or friends' houses that I've tried to connect to give me the message, "connection timed out" after I've entered the correct network and password. The router appears to work fine, since other people can get on the network. What am I missing?
Any advice would be greatly appreciated.
J

Finally figured out what it was. Had to reset settings on the router after a lightning storm, contacted Linksys and they walked me through the appropriate sequence, troubleshooting on their end took about 20 mins but they were extremely helpful and very familiar with OS 10.5, all this time I thought it was the Mac's fault.
Derek

Problem connecting to a wireless network

Similar Messages

Maybe you are looking for