Problem creating Cipher object using getInstance

Hi all, Can anyone please help me with this? I am using jdk1.4 which has jce. I have put jce.jar jars in classpath. When I create Cipher object like
Cipher itsocipher1 = Cipher.getInstance("DES");
it compiles fine but when I exicute it get following error java.lang.NoSuchMethodError at javax.crypto.SunJCE_d.a(DashoA6275) at javax.crypto.SunJCE_d.a(DashoA6275) at javax.crypto.SunJCE_d.verify(DashoA6275) at javax.crypto.SunJCE_b.f(DashoA6275) at javax.crypto.SunJCE_b.<clinit>(DashoA6275) at javax.crypto.Cipher.getInstance(DashoA6275) at EncryptDecrypt.main(EncryptDecrypt.java:26) Please Guide. Thanks.

Copy the jce provider's jar file ( if using SunJCE, then copy sunjce_provider.jar file) to jre's lib/ext directory.
You can also see in the java.policy file where the jvm is looking for the jar files.
grant codeBase "file:${java.home}/lib/ext/*" {
permission java.security.AllPermission;
};

Similar Messages

Create another object using the same container generated by a split...

Hi SapGears!
I'm facing a problem about creating an object using a splited container.
I split the container A in containers A1 and A2 and create alv in A1 and html in A1.
After that, i need to create a toolbar buttons using the class cl_gui_toolbar in A2 without need to recreate all again.
I Try to call method free( ) and recreate the object, but the container A2 appears in blank.
any help will be very nice!!!

I would try different solution. Split A2 into two new rows B1 and B2. In B1 set your toolbar, in B2 your alv. By default set B1 cell hidden
"suppress splitter bar
CALL METHOD gr_splitter_cont->set_row_sash
    EXPORTING
      id    = 1
      type = gr_splitter_cont->type_movable
      value = gr_splitter_cont->false.
"show only alv in entire cell
CALL METHOD gr_splitter_cont->set_row_height( id = 1 height = 1000 ).
Now when you request for toolbar display only that cell
    CALL METHOD gr_splitter_cont->set_row_height( id = 1 height = 0 ).
A kind of workaround but you will avoid much troubles.
Regards
Marcin

Dynamic creating SAPBobsCOM objects using reflection

Hi All,
I'm writing a tool (C#) for SBO for exporting object (oItems, oBanks etc.) to XML files. And I have a problem how to dynamically create object by it's string description. I'm trying to create it using System.Reflection, but cant't find right way to create it.
It must be like that, but it doesn't work:
           Type sboObject = System.Type.GetType("SAPbobsCOM.Items, Interop.SAPbobsCOM", true, true);
           object ibaseObject = Activator.CreateInstance(sboObject);
Any ideas?)

Hi
I've writen this code for instantiating DI API objects using .NET reflection
        private object getObjectBo(int tipo) //tipo: integer representing the object type
            object o = null;
            try
                Type tipoComp = kernel.Company.GetType(); //Type SAPbobsCOM.Company
                MethodInfo info = tipoComp.GetMethod("GetBusinessObject");
                object[] parametros = new object[1]; //Parameters of GetBusinessObject
                object tipoObj = Enum.ToObject(typeof(SAPbobsCOM.BoObjectTypes), tipo);
                parametros[0] = tipoObj;
                o = info.Invoke(kernel.Company, parametros); //Calling GetBusinessObject
            catch (Exception ex)
                kernel.Application.MessageBox(ex.Message, 0, "", "", "");
            return o;
The object returned is COM object (not managed code) then we can't use .NET reflection directly for exploring its methods and attributes .. I think we should use C++ and IDispatch interface, but i don't know how do this yet.
Hope it helps.
Regards

Can't able to create callable object using UI pattern in CAF

Hello
I made one interface using object Selection UI pattern for one of my entity services. Now i am trying to make a callable object using this and i also have been successfully created it. But when I test this callable object, I got these error messages.
1. Could not load execution container: Cannot access object class loader for deployable object sap.com/cafcoregpuivisibleco~container.
2. Could not load execution container: ComponentUsage(container): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
Please tell me the problem

Hi Saurabh,
It seems you found a bug. The problem is that runtime library reference to sap.com/cafruntimeuicouplingapilib library from sap.com/cafcoregpuivisibleco~container dc is misspelled.
So, I don't know whether or not according CSN is already created but I can propose you a solution.
1. Unpack the cafcoregpuivisibleco~container archive from CAFKM0X_0.sca sca.
2. Unpack sap.comcafcoregpuivisiblecocontainer.wda archive.
3. Open the PORTAL-INF\portalapp.xml file and change the following entry of library reference:
<property name="LibrariesReference" value="sap.com/cafruntimeuicopulingapilib" />
to
<property name="LibrariesReference" value="sap.com/cafruntimeuicouplingapilib"/>And pack
it pack it again in correct order(for ex.:
jar.exe -Mcvf sap.comcafcoregpuivisiblecocontainer.wda .
jar.exe -Mcvf sap.comcafcoregpuivisiblecocontainer.sda .
And finally deploy it to your server instance and enjoy.
Best regards,
Aliaksei

Not able to create an object using dbms_metadata.put function

Hi,
I have the metadata of an object in one of my database table as xml. I failed to recreate the object in the other schema using metadata api. I developed a stored function to do the above job. My function doesn't throw any error meanwhile it doesn't create the object.
My code snippet is
CREATE OR REPLACE PROCEDURE DDI.move_table(
table_name in VARCHAR2,
from_schema in VARCHAR2,
to_schema in VARCHAR2 )
AUTHID CURRENT_USER
IS
-- Define local variables.
h1 NUMBER; -- handle returned by OPEN
h2 NUMBER; -- handle returned by OPENW
th1 NUMBER; -- handle returned by ADD_TRANSFORM for MODIFY
th2 NUMBER; -- handle returned by ADD_TRANSFORM for DDL
xml XMLTYPE; -- XML document
errs sys.ku$_SubmitResults := sys.ku$_SubmitResults();
err sys.ku$_SubmitResult;
result BOOLEAN;
BEGIN
SELECT REPOS INTO xml from ddi.ddi_repos_t where obj_id = '1801';
-- Specify the object type using OPENW (instead of OPEN).
h2 := DBMS_METADATA.OPENW('TABLE');
-- First, add the MODIFY transform.
th1 := DBMS_METADATA.ADD_TRANSFORM(h2,'MODIFY');
-- Specify the desired modification: remap the schema name.
DBMS_METADATA.SET_REMAP_PARAM(th1,'REMAP_SCHEMA',from_schema,to_schema);
-- Now add the DDL transform so that the modified XML can be
-- transformed into creation DDL.
th2 := DBMS_METADATA.ADD_TRANSFORM(h2,'DDL');
-- Call PUT to re-create the object.
result := DBMS_METADATA.PUT(h2,xml,0,errs);
DBMS_METADATA.CLOSE(h2);
IF NOT result THEN
-- Process the error information.
FOR i IN errs.FIRST..errs.LAST LOOP
err := errs(i);
FOR j IN err.errorLines.FIRST..err.errorLines.LAST LOOP
dbms_output.put_line(err.errorLines(j).errorText);
END LOOP;
END LOOP;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR(-20510,'No xml is available as metadata');
END;
Could you tell me where is the probelm?
The schema where i created and execute my function having dba privilege also.
Regards,
Madhavi.

Hi Madhavi,
The below code works for me:
SQL> conn sys as sysdba
Connected.
SQL> select count(*) from dba_objects where object_name = 'DEPT' and owner = 'OE';
COUNT(*)
         0
SQL> CREATE OR REPLACE PROCEDURE move_table(
2 table_name in VARCHAR2,
3 from_schema in VARCHAR2,
4 to_schema in VARCHAR2 )
5 AUTHID CURRENT_USER
6 IS
7 -- Define local variables.
8 h1 NUMBER; -- handle returned by OPEN
9 h2 NUMBER; -- handle returned by OPENW
10 th1 NUMBER; -- handle returned by ADD_TRANSFORM for MODIFY
11 th2 NUMBER; -- handle returned by ADD_TRANSFORM for DDL
12 xml clob; -- XML document
13 errs sys.ku$_SubmitResults := sys.ku$_SubmitResults();
14 err sys.ku$_SubmitResult;
15 result BOOLEAN;
16 BEGIN
17
18 select DBMS_METADATA.GET_XML('TABLE','DEPT','SCOTT') into xml from dual;
19
20 -- Specify the object type using OPENW (instead of OPEN).
21 h2 := DBMS_METADATA.OPENW('TABLE');
22
23 -- First, add the MODIFY transform.
24 th1 := DBMS_METADATA.ADD_TRANSFORM(h2,'MODIFY');
25
26 -- Specify the desired modification: remap the schema name.
27 DBMS_METADATA.SET_REMAP_PARAM(th1,'REMAP_SCHEMA',from_schema,to_schema);
28
29 -- Now add the DDL transform so that the modified XML can be
30 -- transformed into creation DDL.
31 th2 := DBMS_METADATA.ADD_TRANSFORM(h2,'DDL');
32
33 -- Call PUT to re-create the object.
34 result := DBMS_METADATA.PUT(h2,xml,0,errs);
35
36 DBMS_METADATA.CLOSE(h2);
37 IF NOT result THEN
38
39 -- Process the error information.
40 FOR i IN errs.FIRST..errs.LAST LOOP
41 err := errs(i);
42 FOR j IN err.errorLines.FIRST..err.errorLines.LAST LOOP
43 dbms_output.put_line(err.errorLines(j).errorText);
44 END LOOP;
45 END LOOP;
46 END IF;
47 EXCEPTION
48 WHEN NO_DATA_FOUND THEN
49 RAISE_APPLICATION_ERROR(-20510,'No xml is available as metadata');
50 END;
51 /
Procedure created.
SQL> exec move_table('DEPT','SCOTT','OE');
PL/SQL procedure successfully completed.
SQL> select count(*) from dba_objects where object_name = 'DEPT' and owner = 'OE';
COUNT(*)
         1
SQL> spool off;The xml returned by the get_xml function contains the tablespace name and storage parameters of the schema in which the object is present.
Check these parameters for both your schemas.

Can you create 3D object using Repousse w/ front and back Inflation w/o seam?

Greetings. I have created a 3d object using repousse in Photoshop (CS5 extended). The original 2d image is circular. I used the Magic Wand Tool to select the 2d image, then 3D/Repousse/Current Selection to create, selecting the inflate (rounded) Repousse Shape Preset with the Depth of 0. It creates the object as expected, except the front-and-back seam has minor irregularities leaving the object with an uneven seam (see image below). The original 2d image was created in Illustrator using the eliptical tool, so it is as regular as possible. I want it to be seamless. The image below shows the rotated object and the very distinct seam.
Any ideas on how to get rid of, or avoid, that seam? Thanks much.

What you could try is downloading the report to the client pc using WEBUTIL_FILETRANSFER.URL_TO_CLIENT, then open the locally save file using something like:
CLIENT_HOST('cmd /c rundll32.exe url.dll,FileProtocolHandler "localfilename"');

How to create an object using sql*plus?

Hi,
I have tried to create an object , but after pressing enter key I could not get SQL command prompt or errors. How to come out from this? Could you help me to find what's wrong.
SQL> create type course as object(
2 course_no number(4),
3 title varchar(35),
4 credits number(1));
5
6
7
8
Thanks.

Put a slash "/" at the end of the command:
CREATE TYPE course AS OBJECT (
   course_no   NUMBER (4),
   title       VARCHAR (35),
   credits     NUMBER (1)
/

Interlace problems with moving objects using iDVD

I had an MP4 file (created by a 3rd party) from a Hi-8 analog tape which has some interlace artifacts on moving images (left image of boy) but not too bad. When the MP4 files was imported into iMovie 11 the interlace artifacts smoothed somewhat - that was OK (right image of boy). The camera was still and the boy was moving. Vertical lines on stationary objects are OK in all images. These are screen captures from the Mac of the mp4 played through quicktime and the same file imported into iMovie 11 and played. I paused both to take the screen capture.
The completed project in iMovie 11 looked OK when previewed prior to rendering. These are 20 year old videos so my expections were being met.   I rendered the project with iDVD to the hard drive first and then to a DVD with the same poor imaging result on the moving object. I am using a new Macbook Pro I bought in early January which came with iMovie 11 and iDVD Ver 7.1.2 (1158). Running Mac OS X 10.7.3 Macbook Pro 2.3 Ghz Corei7   8GB 1333 Mhz DDR3.
I couldn't screen capture from the MAC DVD player screen to illustrate the poor result (got a checkerboard screen) so I took a photo of the screen and imported that (below). The moving boy on the left is from an iMovie 11 screen capture, the image on the right is the moving boy from the rendered DVD I paused on the Mac (and took a pic of).
Below a close up of the poorly rendered moving boy viewed on the resultant DVD. This translates into a horrible rendition of any quick moving object. It happens with any moving image - i.e. a pan across a room with straight vertical lines like edges of a wall will show as serrated and poorly rendered edge. I used a trial version of the Daniusoft DVD creator with the same result! I am at a loss on how to resolve this issue. Any thoughts out there??
I had previously used Pinnacle Studios on my old XP PC which worked great on other tape's Mpeg files and created great DVD's (never had an interlace problem) ... until my computer died ..... so I figured Apple and associated software should be at least equal if not a superior product.   Now I'm not too sure!

I had an MP4 file (created by a 3rd party) from a Hi-8 analog tape which has some interlace artifacts on moving images (left image of boy) but not too bad. When the MP4 files was imported into iMovie 11 the interlace artifacts smoothed somewhat - that was OK (right image of boy). The camera was still and the boy was moving. Vertical lines on stationary objects are OK in all images. These are screen captures from the Mac of the mp4 played through quicktime and the same file imported into iMovie 11 and played. I paused both to take the screen capture.
The completed project in iMovie 11 looked OK when previewed prior to rendering. These are 20 year old videos so my expections were being met.   I rendered the project with iDVD to the hard drive first and then to a DVD with the same poor imaging result on the moving object. I am using a new Macbook Pro I bought in early January which came with iMovie 11 and iDVD Ver 7.1.2 (1158). Running Mac OS X 10.7.3 Macbook Pro 2.3 Ghz Corei7   8GB 1333 Mhz DDR3.
I couldn't screen capture from the MAC DVD player screen to illustrate the poor result (got a checkerboard screen) so I took a photo of the screen and imported that (below). The moving boy on the left is from an iMovie 11 screen capture, the image on the right is the moving boy from the rendered DVD I paused on the Mac (and took a pic of).
Below a close up of the poorly rendered moving boy viewed on the resultant DVD. This translates into a horrible rendition of any quick moving object. It happens with any moving image - i.e. a pan across a room with straight vertical lines like edges of a wall will show as serrated and poorly rendered edge. I used a trial version of the Daniusoft DVD creator with the same result! I am at a loss on how to resolve this issue. Any thoughts out there??
I had previously used Pinnacle Studios on my old XP PC which worked great on other tape's Mpeg files and created great DVD's (never had an interlace problem) ... until my computer died ..... so I figured Apple and associated software should be at least equal if not a superior product.   Now I'm not too sure!

BC4J: problems creating view object with multiple entity objects

Hi,
I working with a view object which contains two entity objects with parent-child relationship like this:
ViewObject - ParentEntityObject - PId
PAttribute
CId (FK)
(- ParentChildAssociation)
- ChildEntityObject - CId
- CAttribute
The 'Read Only' and 'References' options are checked for the association in the view object.
I'm creating a new row using this view object. The parent object should be created new and the child object already exists in the database, so I'm setting only the attributes of the parent object (including foreign key).
After creating the row I display it in a jbo:DataTable and only those attributes coming from the parent object are displayed. The attributes of the child object are not set. After a commit all attributes appear.
The problem is, that I want to display the new row with all attributes to the users BEFORE they commit.
I tried to set the child attributes, but they are read only by definition and even when I unchecked the 'Read Only' option and set the attributes to 'Always Updateable' in the view object it is giving me
JBO-27008: Attribute set for CAttribute in view object ViewObject failed.
Is there a way to make all attributes of the child object visible in the view object without committing changes?
(JDev 9.0.2.822)
Any help would be appreciated.
Regards,
Christian

Once again the structure, sorry.
ViewObject
|-ParentEntityObject
..|-PId
..|-PAttribute
..|-CId (FK)
|-ParentChildAssociation
|-ChildEntityObject
..|-CId
..|-CAttribute
Christian

Is there a way to create an object using Trapcode Form and then use that object as a particle in Trapcode Particular?

I made some objects in Cinema 4D and I tried to import them into After Effects CC 2014. I get an error saying 'Cannot find Adobe Premiere Pro Dynamic Link'. So I tried it in AE CC and that worked. However, I want to create a form object and then use that as a particle for Trapcode Particular. Is this even possible?
Thank you for any help!

There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19)    error group: 101 key: FC_ERROR_PROGRAM
     at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
     at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

Problem creating PDF file using the Adobe PDF printer

Apologies if I have hit the wrong forum for this issue.
I am using Adode Acrbat 9 PRO version 9.4.6 on a Windows 7 SP1 machine.
I am running an application that presents information on web pages that I need to capture as pdf files. I am using an automation tool so it is limiting my posibilities of accomplishing this task.
I am attempting to use the Adobe PDF printer as the vehicle to create these PDF files but have encountered the following issues
The page is truncated on the right hand side
Only 1 page is created when I was expecting 7
I have specified a file path for the ADOBE PDF Output Folder ... C:\Windows\Temp and
checked the box "Add document information" but I am not given the opportuniy to enter a file name. It is using the file name from the URL
To verify my PDF content I used a different method to create the PDF from the same web page
Right click within the web page and select Convert to Adobe PDF. The pdf file has the full content with no truncation and is 7 pages in total.
Unfortunately I am unable to use this method with my automation tool
Any pointers will be gratefully received

Some progess
I changed the page orientation to landscape and that removed the truncation. I am not sure why it is not using the "shrink to fit" but for the purposes of this exercise I can live with this solution.
If I click Print Preview I can view all pages and then if I select the Print Icon I get a PDF file containing all pages. This is so bizarre.
So to recap
File > Print > Adobe PDF Printer only creates 1 page
File > Print Preview > Print Document (Alt +P) > Print >Adobe PDF Printer creates 7 pages
I guess this would be a good time to call support to see what they have to say on this topic.

Problems Creating Slideshow DVD using PSE 8.0

I have created a slideshow DVD in the past without problems. I have recently created a new slideshow of photos along with audio. It previews just fine in both PSE and Windows Movie Maker, but after I burned the DVD, only one song plays back when the DVD is in the TV.
Any suggestions?

Unless you have the combine programs Photoshop Elements & Premier Elements; there are limitations.
If you have other software; it’s possible to combine multiple tracks or play lists ant then attach them as a single file in the slideshow editor.

How to create Entity objects using xml as a datasource

Hi All,
How to create EO(ADF Business components) using XML as a datasource instead of database tables..Pls do reply..Its an urgent requirement
Thanks in Advance
Edited by: 1000899 on Apr 25, 2013 12:01 AM
Edited by: 1000899 on Apr 25, 2013 12:02 AM

There is nothing 'urgent' in this forum. We are all volunteers spending our spare time helping out other users. If you have an urgent matter, you have to open an SR with sopport.oracle.com
If it's urgent, then why don't you provide information needed to answer the question.
Which jdev version do you use?
What is the use case?
To answer your question: A look into the docs http://docs.oracle.com/cd/E35521_01/web.111230/e16182/bcadvvo.htm#sm0341 and http://docs.oracle.com/cd/E35521_01/web.111230/e16182/bcadvvo.htm#sm0338 holds the answer to it.
Timo

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

Problem creating Cipher object using getInstance

Similar Messages

Maybe you are looking for