Problem creating dynamic pools with JdbcServices?
Hi
I am using WL Server 6.1 and am trying to create dynamic pools using the JdbcServices
object. Basically, I create a properties object, and fill it with the properties,
and then pass it as a parameter to the CreatePool command.
I have noticed that whenever I set the initialCapacity property, an exception
gets thrown. The pool gets created and is visible in the admin console, but I
cannot do any operations on the pool.
It seems to work if I don't set initialCapacity. In this case, initialCapacity
defaults to 0 (and not 1 as the documentation says).
Could the Weblogic people throw some light on the issue? This is very important
for our release.
Thanks in advance,
P Kesh
Hi Mitesh
Here is the exception I get when I try to create a pool called 'pkPool9':
The createPool command failed: Pool pkPool9 can't be created. Exception:java.lang.reflect.UndeclaredThrowableException:
Start server side stack trace:
java.lang.reflect.UndeclaredThrowableException: javax.management.ReflectionException:
error invoking addTarget
Start server side stack trace:
javax.management.ReflectionException: error invoking addTarget
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:688)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:135)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy8.invoke(Unknown Source)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy99.addTarget(Unknown Source)
at weblogic.jdbc.common.internal.ConnectionPool.dynaStartup(ConnectionPool.java:498)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:727)
at weblogic.jdbc.common.internal.ConnectionPool.createPool(ConnectionPool.java:709)
at weblogic.jdbc.common.internal.ConnectionPool_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
-Thanks
P Kesh
Mitesh Patel <[email protected]> wrote:
Hi
Exception should be thrown only if initial capacity > Max capacity or
inital capacity <
0. Can you post the exception you are getting here?
Thanks,
Mitesh
P Kesh wrote:
Hi
I am using WL Server 6.1 and am trying to create dynamic pools usingthe JdbcServices
object. Basically, I create a properties object, and fill it with theproperties,
and then pass it as a parameter to the CreatePool command.
I have noticed that whenever I set the initialCapacity property, anexception
gets thrown. The pool gets created and is visible in the admin console,but I
cannot do any operations on the pool.
It seems to work if I don't set initialCapacity. In this case, initialCapacity
defaults to 0 (and not 1 as the documentation says).
Could the Weblogic people throw some light on the issue? This is veryimportant
for our release.
Thanks in advance,
P Kesh
Similar Messages
-
How to create dynamic DataTable with dynamic header/column in JSF?
Hello everyone,
I am having problem of programmatically create multiple DataTables which have different number of column? In my JSF page, I should implement a navigation table and a data table. The navigation table displays the links of all tables in the database so that the data table will load the data when the user click any link in navigation table. I have gone through [BalusC's post|http://balusc.blogspot.com/2006/06/using-datatables.html#PopulateDynamicDatatable] and I found that the section "populate dynamic datatable" does show me some hints. In his code,
// Iterate over columns.
for (int i = 0; i < dynamicList.get(0).size(); i++) {
// Create <h:column>.
HtmlColumn column = new HtmlColumn();
dynamicDataTable.getChildren().add(column);
// Create <h:outputText value="dynamicHeaders"> for <f:facet name="header"> of column.
HtmlOutputText header = new HtmlOutputText();
header.setValue(dynamicHeaders[i]);
column.setHeader(header);
// Create <h:outputText value="#{dynamicItem[" + i + "]}"> for the body of column.
HtmlOutputText output = new HtmlOutputText();
output.setValueExpression("value",
createValueExpression("#{dynamicItem[" + i + "]}", String.class));
column.getChildren().add(output);
public HtmlPanelGroup getDynamicDataTableGroup() {
// This will be called once in the first RESTORE VIEW phase.
if (dynamicDataTableGroup == null) {
loadDynamicList(); // Preload dynamic list.
populateDynamicDataTable(); // Populate editable datatable.
return dynamicDataTableGroup;
I suppose the Getter method is only called once when the JSF page is loaded for the first time. By calling this Getter, columns are dynamically added to the table. However in my particular case, the dynamic list is not known until the user choose to view a table. That means I can not call loadDynamicList() in the Getter method. Subsequently, I can not execute the for loop in method "populateDynamicDataTable()".
So, how can I implement a real dynamic datatable with dynamic columns, or in other words, a dynamic table that can load data from different data tables (different number of columns) in the database at run-time?
Many thanks for any help in advance.flyeminent wrote:
However in my particular case, the dynamic list is not known until the user choose to view a table. Then move the call from the getter to the bean's action method. -
Cannot create dynamic page with cursor based on linked table
I get the following error when i try to create a dynamic portal page that uses a pl/sql cursor:
ORA-06550: line 1, column 24:
PL/SQL: ORA-00980: synonym translation is no longer valid
ORA-06550: line 1, column 24:
PL/SQL: SQL Statement ignored (WWV-11230)
Failed to parse as REPORTS - DECLARE CURSOR C1 IS SELECT * FROM
[email protected]; BEGIN FOR R1 IN C1 LOOP HTP.P(','||'<BR>');
END LOOP; END; (WWV-08300)
Dynamic page:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>
declare
cursor c1 is
select * from [email protected];
begin
for r1 in c1 loop
htp.p('hello<br>');
end loop;
end;
</ORACLE>
</BODY>
</HTML>
When i use the sql query from the cursor in the page below, i get no errors:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>select * from [email protected]</ORACLE>
</BODY>
</HTML>
I tried a dynamic page with a cursor on session_roles and had no problems. I assume that there is an issue with the database link or the privileges. The queries seem to get executed under portal_public;
Oracle Portal Version: 9.0.4.0.99I get the following error when i try to create a dynamic portal page that uses a pl/sql cursor:
ORA-06550: line 1, column 24:
PL/SQL: ORA-00980: synonym translation is no longer valid
ORA-06550: line 1, column 24:
PL/SQL: SQL Statement ignored (WWV-11230)
Failed to parse as REPORTS - DECLARE CURSOR C1 IS SELECT * FROM
[email protected]; BEGIN FOR R1 IN C1 LOOP HTP.P(','||'<BR>');
END LOOP; END; (WWV-08300)
Dynamic page:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>
declare
cursor c1 is
select * from [email protected];
begin
for r1 in c1 loop
htp.p('hello<br>');
end loop;
end;
</ORACLE>
</BODY>
</HTML>
When i use the sql query from the cursor in the page below, i get no errors:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>select * from [email protected]</ORACLE>
</BODY>
</HTML>
I tried a dynamic page with a cursor on session_roles and had no problems. I assume that there is an issue with the database link or the privileges. The queries seem to get executed under portal_public;
Oracle Portal Version: 9.0.4.0.99 -
Problems creating server pool on 2.2 - check_sys_passwd
I have installed OVM Server on one machine and OVM Manager on another machine.
I try to create a server pool on the manager but I get a check_sys_passwd error when I try to create the server pool.
It looks like it is having issues with the user id and password I supply for the utility server.
I did a basic install of both software packages.
I am using root and the root password for the utility server.
Thinking that it might be an firewall issue I have run service iptables stop on the OVM Server.
Is there any trick to getting the server pool created?
Phil.Hi,
I have this same problem. My ovm setup is very simple, 2 hosts. A vm/utility/master server and a host with the manager.
I've checked all password again, they are ok, just letters and numbers. A tried to move /etc/ovs-agent/db to db_old but i've got the same error.
Logs:
------------- /var/log/ovm-manager/oc4j.log ------------
2009-12-04 11:59:28.758 ERROR [Server Pool Management][Server Pool][vm01pool]:Check prerequisites to create server pool (vm01pool) failed: (OVM-1004 XML-RPC Client Call Oracle VM Agent API 'check_sys_passwd' error:
No response after waiting for 30000 milliseconds., please try again later.)
2009-12-04 11:59:28.774 WARNING J2EE EJB-08002 [ServerPoolMgtEJB] thread HTTPThreadGroup-37 encountered an exception while trying to end the transaction: javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
2009-12-04 11:59:28.777 NOTIFICATION Exception Message:OVM-1004 XML-RPC Client Call Oracle VM Agent API 'check_sys_passwd' error:
No response after waiting for 30000 milliseconds., please try again later.
------------- /var/log/ovs-agent/ovs_operation.log ------------
"2009-12-04 11:59:42" INFO=> check_sys_passwd: success. cmd='echo'
I've no more ideas to solve this issue. Can someone give me some help pliz?
Tnkx.
JD -
Haw to create dynamic PDF with dynamic flowing tables across pages?
Hi!
Sorry for my english, I use it very rarely
I try creating PDF form with many tables (example document: https://docs.google.com/open?id=0BxTpZtaOkLBbcEJzdGJFcXVSWDJ0RlladUZJd1hMZw). But, when the table or any element hit the bottom of page, they just flow over it. Also in designer elements don't distribute across pages but just disappear on first page bottom. I want to dynamically distribute elements across pages. What I do incorrect?
mPlease share you form with me [email protected]
I will try to solve the problem.
Nith -
Problem creating Allocation Table with Reference to a PO
Dear Folks,
I am having problems creating an allocation table with reference to a PO in T-code WA01.
I read the SAP help that some prerequisites need to exist:
==> You can only reference order items flagged as being relevant to a stock split (the Allocation table relevant indicator in the additional item data).
Can anyone advice me where to find this stock split indicator?
Also, can anyone advice me how to reuse an allocation table? For example, I had previously created an allocation table with many articles and various allocation rules. I already generated follow on documents for this table.
Say after 2 weeks, I have the similar requirements that I can make use of the same table, only with minor adjustments to the quantity. How do I create a new allocation table using the existing allocation table data?
Thanks and Regards
JunwenAny idea please?
thanks -
Problem creating a table with a subquery and a dblink
Hello!!
I have a little problem. When I create a table with a subquery and a dblink, for example:
CREATE TABLE EXAMPLE2 AS SELECT * FROM EXAMPLE1@DBLINK
the table definition is changed. Fields with a type of CHAR or VARCHAR2 are created with a size three times bigger than the original table in the remote database. Field of type DATE and NUMBER are not changed. For example if the original table, in the database 1, has a field of type CHAR(1) it is create in the local database with a type of CHAR(3), and a VARCHAR2(5) field is created with VARCHAR2(15).
Database 1 has a WE8DEC character set.
Database 2 has a AL32UTF8 character set.
Could it be related to the difference in character sets?
What can I do to make Oracle use the same table definition when creating a table in this way?
Thanks!!That is related to character sets, and probably necessary if you want all the data in the remote table to be able to fit in the new table.
When you declare a column VARCHAR2(5), by default, you're allocating 5 bytes of storage. In a single-byte character set, which I believe WE8DEC is, that also happens to equate to 5 characters. In a multi-byte character set like AL32UTF8, though, 1 character may require up to 3 bytes of storage, so you'd need to allocate 15 bytes to store that data. That's what's going on here.
You could still store all the data if you create the table locally by explicitly requesting 5 characters of storage by declaring the column VARCHAR2(5 CHAR). You could also set the NLS_LENGTH_SEMANTICS parameter to CHAR rather than BYTE before creating the table, but I believe that both of these will only apply when you're explicitly defining columns as part of your CREATE TABLE. I don't believe either will apply to CTAS statements.
Justin -
Problem creating process order with ref of sale order
Dear all,
Kindly give solution for this scenerio..............................
I am creating Process Order with ref of sale order manually in cor1. In the COR1 screen copy from field i gave my ref sale order, so that particualr order and batch is assigned to that order only.
My problem was suppose if sale order is created for 10 tonns, but my batch size and resource capacity is 2 tonns only. so first time i change my batch quantity 2 tonns instead of 10 tonns and created my order and confirmed.
if i go to second time the same process i am doing creating process order with ref of same sale order but it comes again 10 tonns instead of 8 tonns. why it comes like this already i confirmed 2 tonns in this sale order?
my requirement is if any process order is created with ref of any sale order and again if i am creating any process order with ref of same sale order left quantity only system should show.
for this what i have to do kindly help to this
regards,
s.sakthivelDear KK,
Pls check whether ZKIN, ZKQT, ZKOR have all the properties similar to IN, QT, OR respectively. If they are different, please ensure that you know the reason why they are different. This check has to be done at tcode VOV8
Some fields like sales document category, Transaction group, screen seq group, Doc pricing procedure need to be similar to the parent document unless you know why you have changed them.
Once this check is done, check the copy controls in VTAA. Before that try creating these documents separately without reference. This shoudl work fine only after which you need to check copy control. If this is not working fine, then there is some problem with the document type settings in VOV8. Testing this is possible only if Reference mandatory field is left empty. Make sure that is properly configured.
Once this is done, check copy controls in VTAA. You can just copy the copycontrol between IN and QT and QT and OR and create for ZKIN to ZKQT and ZKQT to ZKOR.
Once this is done, check whether your item category settings are properly done , also the schedule line settings. The tcodes are VOV7, VOV6, VOV4, VOV5 etc.
Now check whether your material master and customer master are consistent with the item category settings(Item category group).
Now create the transaction. It shoudl work fine.
Reward if this helps. -
Problem creating a datablock with columns from 2 tables...
Hello guys, i have a problem in creating a datablock with columns from 2 different tables. I try to create the datalock manually and in the Query Data Source Type Property i choose FROM clause query, and in the query data source name property i type my sql statement with the columns i want to display.After that i place the items that the datablock will contain , manually from the painter. However , when i run the application, the datablock doesn't display the items from the database. Am i doing something wrong?
Thanx in advance,
Regards,
Bill.Never mind Peter, I found the error. I forgot to make execute_query for the datablock, so this was the reason why the items weren't displayed to me.
Thanx anyway a lot for your advices and your time you spent ! -
Problem creating connection pool for Sybase
I'm trying to create a connection pool with Sybase as the database, as follows:
weblogic.jdbc.connectionPool.demoPool=\
url=jdbc:sybase:Tds:10.20.30.50:4100/dbsrvr,\
driver=com.sybase.jdbc.SybDriver
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=dbdev;password=dbdev,\
allow=system
I get the following error:
java.sql.SQLException: JZ004: User name property missing in DriverManager.getCon
nection(..., Properties).
Any pointers on what's wrong?
RgdsHi. there's no line continuation stuff after the driver line.
Try:
weblogic.jdbc.connectionPool.demoPool=\
url=jdbc:sybase:Tds:10.20.30.50:4100/dbsrvr,\
driver=com.sybase.jdbc.SybDriver,\
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=dbdev;password=dbdev,\
allow=system
and make sure there's no whitespace in the properties file after any of
the '\'s in these lines.
Joe
Eeshan wrote:
>
I'm trying to create a connection pool with Sybase as the database, as follows:
weblogic.jdbc.connectionPool.demoPool=\
url=jdbc:sybase:Tds:10.20.30.50:4100/dbsrvr,\
driver=com.sybase.jdbc.SybDriver
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=dbdev;password=dbdev,\
allow=system
I get the following error:
java.sql.SQLException: JZ004: User name property missing in DriverManager.getCon
nection(..., Properties).
Any pointers on what's wrong?
Rgds -
Problems creating dynamic selection screen
Hi all,
i'm trying to dynamically generate a selection screen and show it as subscreen using the two function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. I call the function modules in the PBO of the therefor defined subscreen. The FREE_SELECTIONS_DIALOG fm has the two import parameter "as_subscreen" and "as_window". If i use the "as_window" parameter the selection screen comes up as popup. If i use the "as_subscreen" parameter, i can't see anything in my defined subscreen.
Any suggestions ?
Thanks in Advance
DirkHi,
The above requirement is not possible without using logical database.
The reason is that the compiler identifies the below syntax only inside a LDB program .
SELECTION-SCREEN DYNAMIC SELECTIONS
FOR {NODE|TABLE} node [ID id].
The above syntax creates a subscreen container on the standard selection screen of the program during generation
and we are able to view the dynamic selections icon on the selection screen.
Hence it is not possible to use the FM 'FREE_SELECTIONS_DIALOG' as a subscreen without using a
logical database of the relevant table.
However if you dont want to create a new LDB for each table, there is a trick which needs to be performed
once in your SAP system and all custom programs can use this FM to create a dynamic selection screen
as a subscreen of the standard selection screen.
The prerequisite steps are as follows:
1: Create a dummy / test database table in SE11 with a single field i.e. for example mandt , matnr
2: Create a new logical database program for this table in SE36. Save and activate.
This will create dynamic selections for the fields of the table created in step 1.
Steps to be followed in the required custom ABAP program to create the dynamic selection screen as a subscreen.
A: Include the LDB program created in step 2, in the attributes of the custom ABAP program.
Now when you execute the program, you can see the dynamic selection icon for the dummy table created in step 1.
B: In your custom program we need to suppress the icon for 'Dynamic Selections' from the standard selection screen.
We need to perform this action, because the 'Dynamic Selections' icon always triggers a call to the
dynamic selection screen of the included LDB progam. ( In our case a dummy table created in step 1 ).
Whereas we want to trigger a call of the dynamic selection screen of our desired table.
Logic is as follows:
In 'AT SELECTION-SCREEN OUTPUT' event call the FM RS_SET_SELSCREEN_STATUS to exclude the fcode 'DYNS'.
C: Add a pushbutton / checkbox on your selection screen to trigger a call to the FM 'FREE_SELECTIONS_INIT' &
'FREE_SELECTIONS_DIALOG' in the 'AT SELECTION-SCREEN' event.
D: When the user clicks the pushbutton / checkbox for dynamic selections call the above 2 FM for the desired table
with the AS_SUBSCREEN flag of FREE_SELECTIONS_DIALOG = 'X'
Result: Your dynamic selections screen will be created as a subscreen of the standard selection screen and not as a pop-up.
Advantage: With the creation of the single custom table & LDB, you are now able to create dynamic selections as subscreen
in any program in the system. All we need to do is follow the steps A, B & C in each program.
Note: Your other restrictions with dynamic selection screen ie. submit in background , save as variant still remain and
you need to handle them accordingly.
let me know if you need sample code.
Regards,
Bhawit Kumar -
Want to create dynamic SQL with table join
I want to create a dynamic SQL query so that the user can enter any two table names on the selection screen and two field names that he wants to join. After which i should be able to dynamically generate the SQL (native or open) and show the result as report. I have already read the forum threads and know how to create dynamic SQL for single table, what i m struggling with is how to do inner join. I know i can use nested select but that will make the query very slow because i want to extend it to more than 2 tables later.
Will give points to useful answer for sure, thanks for reading.Hi,
Following is a piece of code which I have used in my program.
DATA: ws_flds(72) TYPE c.
DATA: ftab LIKE TABLE OF ws_flds.
ws_flds = 'rbukrs rprctr racct ryear '.
APPEND ws_flds TO ftab.
SELECT (ftab)
INTO CORRESPONDING FIELDS OF TABLE it_grp_glpca
FROM glpca FOR ALL ENTRIES IN i_cert_item
WHERE kokrs = c_kokrs
AND rldnr = '8A'
AND rrcty IN ('0','2')
AND rvers = '000'
AND rbukrs = i_cert_item-bukrs
AND ryear = p_ryear
AND rprctr = i_cert_item-prctr
AND racct = i_cert_item-saknr
AND ( poper BETWEEN '001' AND ws_poper )
AND aufnr IN s_aufnr
AND kostl IN s_kostl
AND rfarea IN s_fkber
AND rmvct IN s_rmvct
AND sprctr IN s_sprctr
AND ( racct BETWEEN c_low AND c_high ).
You can now pass your table name as (p_table) or append fieldnames to the internal table (ftab). if it is join then you can append this table like abukrs asaknr..etc.
Regards
Subramanian -
Problem creating Service POs with BAPI_PO_CREATE1
Hi.
I'm trying to create service POs with data that i read from an excel file, to do this I'm using the bapi: <b>BAPI_PO_CREATE1</b> I'm passing the following parameters:
IMPORT:
- poheader
- poheaderx
TABLES:
- return
- poitem
- poitemx
- poaccount
- poaccountx
- poservices
- posrvaccessvalues
- poservices text
- extensionin
When I execute the bapi, I'm getting the following messages into table return:
<i>W - Error transferring ExtensionIn data for enhancement CI_EKKODB
E - No instance of object type PurchaseOrder has been created. External reference:
E - PO header data still faulty
E - Purchase order date is in the past
I - Change WBS Element could not be effected
E - You cannot maintain service specs. due to incomplete transfer structure</i>
Can anybody, please say me what am i doing wrong? How this bapi works?
Regards.
Gregory.Hello My friend
Check this code:
Code listing for: LZMMIUP001F01
Description: Include LZMMIUP001F01
***INCLUDE LZMMIUP001F01 .
*& Form fill_item
text
-->P_WA text
FORM fill_item TABLES: poitem STRUCTURE bapimepoitem "Item Data
poitemx STRUCTURE bapimepoitemx "Item Data (Change Parameter
USING wa STRUCTURE zlo_mmcnv009
package.
item number
poitem-po_item = wa-itemnum.
poitemx-po_itemx = 'X'.
poitemx-po_item = wa-itemnum.
IF package <> ''.
poitem-pckg_no = package.
poitemx-pckg_no = 'X'.
ENDIF.
*Account Assignment Category
IF wa-category <> ''.
poitem-acctasscat = wa-category.
poitemx-acctasscat = 'X'.
ENDIF.
*Item Category in Purchasing Document
IF wa-itemcat <> ''.
poitem-item_cat = wa-itemcat.
poitemx-item_cat = 'X'.
ENDIF.
*Short Text
IF wa-sortxt <> ''.
poitem-short_text = wa-sortxt.
poitemx-short_text = 'X'.
ENDIF.
*Material Number
IF wa-material <> ''.
poitem-material = wa-material.
poitemx-material = 'X'.
ENDIF.
Unit of Measure
IF wa-undmesure <> ''.
poitem-po_unit = wa-undmesure.
poitemx-po_unit = 'X'.
ENDIF.
*Purchase Order Quantity
IF wa-quantity <> ''.
poitem-quantity = wa-quantity.
poitemx-quantity = 'X'.
ENDIF.
*Net Price in Purchasing Document
IF wa-netprice <> ''.
poitem-net_price = wa-netprice.
poitemx-net_price = 'X'.
ENDIF.
*Plant
IF wa-plant <> ''.
poitem-plant = wa-plant.
poitemx-plant = 'X'.
ENDIF.
*Material Group
IF wa-matgrp <> ''.
poitem-matl_group = wa-matgrp.
poitemx-matl_group = 'X'.
ENDIF.
*Free Item
IF wa-free <> ''.
poitem-free_item = wa-free.
poitemx-free_item = 'X'.
ENDIF.
APPEND poitem.
APPEND poitemx.
ENDFORM. " fill_item
*& Form fill_header
text
-->P_WA text
FORM fill_header USING wa STRUCTURE zlo_mmcnv009
poheader STRUCTURE bapimepoheader "Header Data
poheaderx STRUCTURE bapimepoheaderx. "Header Data (Change Toolbar)
DATA: dia(2), mes(2), ano(4),
vendor(10) TYPE n.
dia = wa-docdate(2).
mes = wa-docdate+2(2).
ano = wa-docdate+4(4).
CONCATENATE ano mes dia INTO wa-docdate.
dia = wa-datestart(2).
mes = wa-datestart+2(2).
ano = wa-datestart+4(4).
CONCATENATE ano mes dia INTO wa-datestart.
dia = wa-datend(2).
mes = wa-datend+2(2).
ano = wa-datend+4(4).
CONCATENATE ano mes dia INTO wa-datend.
Document Type
IF wa-doctyp <> ''.
poheader-doc_type = wa-doctyp.
poheaderx-doc_type = 'X'.
ENDIF.
vendor number
IF wa-vendor <> ''.
IF NOT ( wa-vendor CA sy-abcde ).
vendor = wa-vendor.
poheader-vendor = vendor.
poheaderx-vendor = 'X'.
ELSE.
poheader-vendor = wa-vendor.
poheaderx-vendor = 'X'.
ENDIF.
ENDIF.
Document Date
IF wa-docdate <> ''.
poheader-doc_date = wa-docdate.
poheaderx-doc_date = 'X'.
ENDIF.
purchasing organization
IF wa-organiz <> ''.
poheader-purch_org = wa-organiz.
poheaderx-purch_org = 'X'.
ENDIF.
Purchasing Group
IF wa-purgroup <> ''.
poheader-pur_group = wa-purgroup.
poheaderx-pur_group = 'X'.
ENDIF.
Start of Validity Period
IF wa-datestart <> ''.
poheader-vper_start = wa-datestart.
poheaderx-vper_start = 'X'.
ENDIF.
End of Validity Period
IF wa-datend <> ''.
poheader-vper_end = wa-datend.
poheaderx-vper_end = 'X'.
ENDIF.
Company Code
IF wa-compcode <> ''.
poheader-comp_code = wa-compcode.
poheaderx-comp_code = 'X'.
ENDIF.
Status of Purchasing Document
IF wa-status <> ''.
poheader-status = wa-status.
poheaderx-status = 'X'.
ENDIF.
ENDFORM. " fill_header
*& Form fill_account
text
-->P_WA text
FORM fill_account TABLES poaccount STRUCTURE bapimepoaccount
poaccountx STRUCTURE bapimepoaccountx
USING wa STRUCTURE zlo_mmcnv009.
DATA: account(10) TYPE n.
poaccount-po_item = wa-itemnum.
poaccountx-po_item = wa-itemnum.
*Cost Centre
poaccount-costcenter = wa-coscenter.
poaccountx-costcenter = 'X'.
*Order Number
poaccount-orderid = wa-ordernumb.
poaccountx-orderid = 'X'.
*"G/L Account Number
IF wa-accnumb <> ''.
account = wa-accnumb.
poaccount-gl_account = account."wa-accnumb.
poaccountx-gl_account = 'X'.
ENDIF.
IF NOT ( wa-coscenter = '' AND
wa-ordernumb = '' AND
wa-accnumb = '' ).
APPEND poaccount.
APPEND poaccountx.
ENDIF.
ENDFORM. " fill_account
*& Form fill_schedule
text
-->P_WA text
FORM fill_schedule TABLES poschedule STRUCTURE bapimeposchedule
poschedulex STRUCTURE bapimeposchedulx
USING wa STRUCTURE zlo_mmcnv009.
DATA: dia(2), mes(2), ano(4).
dia = wa-delivdate(2).
mes = wa-delivdate+2(2).
ano = wa-delivdate+4(4).
CONCATENATE ano mes dia INTO wa-delivdate.
*Delivery Date
poschedule-po_item = wa-itemnum.
poschedulex-po_item = wa-itemnum.
poschedule-delivery_date = wa-delivdate.
poschedulex-delivery_date = 'X'.
IF NOT wa-delivdate = ''.
APPEND poschedule.
APPEND poschedulex.
ENDIF.
ENDFORM. " fill_schedule
*& Form fill_header_contract
text
-->P_WA text
-->P_HEADER text
-->P_HEADERX text
FORM fill_header_contract USING wa STRUCTURE zlo_mmcnv009
coheader STRUCTURE bapimeoutheader
coheaderx STRUCTURE bapimeoutheaderx.
DATA: dia(2), mes(2), ano(4).
dia = wa-datestart(2).
mes = wa-datestart+2(2).
ano = wa-datestart+4(4).
CONCATENATE ano mes dia INTO wa-datestart.
dia = wa-datend(2).
mes = wa-datend+2(2).
ano = wa-datend+4(4).
CONCATENATE ano mes dia INTO wa-datend.
Purchasing Document Date
coheader-doc_date = sy-datum.
coheaderx-doc_date = 'X'.
*Item Number Interval
coheader-item_intvl = '10'.
coheaderx-item_intvl = 'X'.
Currency Key
coheader-currency = 'BHD'.
coheaderx-currency = 'X'.
languaje
coheader-langu = 'EN'.
coheaderx-langu = 'X'.
Document Type
IF wa-doctyp <> ''.
coheader-doc_type = wa-doctyp.
coheaderx-doc_type = 'X'.
ENDIF.
vendor number
IF wa-vendor <> ''.
coheader-vendor = wa-vendor.
coheaderx-vendor = 'X'.
ENDIF.
purchasing organization
IF wa-organiz <> ''.
coheader-purch_org = wa-organiz.
coheaderx-purch_org = 'X'.
ENDIF.
Purchasing Group
IF wa-purgroup <> ''.
coheader-pur_group = wa-purgroup.
coheaderx-pur_group = 'X'.
ENDIF.
Start of Validity Period
IF wa-datestart <> ''.
coheader-vper_start = wa-datestart.
coheaderx-vper_start = 'X'.
ENDIF.
End of Validity Period
IF wa-datend <> ''.
coheader-vper_end = wa-datend.
coheaderx-vper_end = 'X'.
ENDIF.
ENDFORM. " fill_header_contract
*& Form fill_item_contract
text
-->P_WA text
-->P_COITEM text
-->P_COITEMX text
FORM fill_item_contract TABLES: coitem STRUCTURE bapimeoutitem
coitemx STRUCTURE bapimeoutitemx
USING wa STRUCTURE zlo_mmcnv009.
item number
coitem-item_no = wa-itemnum.
coitemx-item_no = wa-itemnum.
coitemx-item_nox = 'X'.
*Material Number
IF wa-material <> ''.
coitem-material = wa-material.
coitemx-material = 'X'.
ENDIF.
*Target Quantity
IF wa-quantity <> ''.
coitem-target_qty = wa-quantity.
coitemx-target_qty = 'X'.
ENDIF.
*Net Price in Purchasing Document
IF wa-netprice <> ''.
coitem-net_price = wa-netprice.
coitemx-net_price = 'X'.
ENDIF.
APPEND coitem.
APPEND coitemx.
ENDFORM. " fill_item_contract
*& Form fill_service
text
-->P_POSERVICES text
-->P_T_ITEM text
-->P_ITEMNUM text
FORM fill_service TABLES poservices STRUCTURE bapiesllc
t_item STRUCTURE zlo_mmcnv009
poservices_2 STRUCTURE bapiesklc
USING itemnum packno.
DATA: line(10) TYPE n,
service(18) TYPE n,
packno2(10) TYPE n.
poservices-pckg_no = packno.
packno2 = packno.
packno = packno + 1.
poservices-line_no = '0000000001'.
poservices-outl_ind = 'X'.
poservices-subpckg_no = packno.
APPEND poservices.
line = '0000000002'.
LOOP AT t_item WHERE itemnum = itemnum.
IF t_item-activity <> ''.
IF NOT ( t_item-activity CA sy-abcde ).
service = t_item-activity.
poservices-service = service.
ELSE.
poservices-service = t_item-activity.
ENDIF.
ELSE.
poservices-service = t_item-activity.
ENDIF.
poservices-pckg_no = packno.
poservices-line_no = line. "itemnum.
poservices-ext_line = t_item-line.
poservices-quantity = t_item-quantity1.
poservices-base_uom = t_item-undmed.
poservices-gr_price = t_item-price.
poservices-short_text = t_item-shortxt.
poservices-subpckg_no = '0000000000'.
poservices-outl_ind = ''.
APPEND poservices.
poservices_2-pckg_no = packno.
poservices_2-line_no = line.
poservices_2-SERNO_LINE =
poservices_2-SERIAL_NO =
poservices_2-quantity = t_item-quantity1.
poservices_2-net_value = t_item-price.
APPEND poservices_2.
line = line + 1.
ENDLOOP.
ENDFORM. " fill_service
*& Form fill_pocond
text
-->P_POCOND text
-->P_POCONDX text
-->P_WA text
FORM fill_pocond TABLES pocond STRUCTURE bapimepocond
pocondx STRUCTURE bapimepocondx
USING wa STRUCTURE zlo_mmcnv009.
*Net Price in Purchasing Document
IF wa-netprice <> ''.
pocond-itm_number = wa-itemnum.
pocondx-itm_number = wa-itemnum.
pocond-cond_value = wa-netprice.
pocondx-cond_value = 'X'.
pocond-currency = 'BHD'.
pocondx-currency = 'X'.
pocond-cond_type = 'PBXX'.
pocondx-cond_type = 'X'.
*COND_TYPE
APPEND pocond.
APPEND pocondx.
ENDIF.
ENDFORM. " fill_pocond -
Problem creating dynamic component children with RestoreState of JSF 1.2
Hello everybody,
With JSF 1.1, it was possible to create children of a component dynamically in the constructor of a component.
But now, with JSF 1.2, there is an issue with the RestoreState as a new instance of each component of the tree is created.
Does someone has an idea on how to solve this issue?
One possibility is to create the children not in the component, but in the renderer of the component.
But I'm not really convinced of this solution...
Thank you in advance.
bgOnlineYou can create a new component dynamically in the method setParent() according to the following code snippet:
public void setParent(UIComponent parent) {
if (parent != null) {
List<UIComponent> children = parent.getChildren();
Application application = FacesContext.getCurrentInstance().getApplication();
componentLabel = (HtmlOutputLabel) application
.createComponent(HtmlOutputLabel.COMPONENT_TYPE);
componentLabel.setTransient(true);
children.add(componentLabel);
} else if (parent == null) {
if (componentLabel != null) {
List<UIComponent> children = getParent().getChildren();
children.remove(componentLabel);
super.setParent(parent);
} -
Cannot create connection pool with weblogic jDriver XA for oracle
Hi everybody,
we have serious problems configuring the weblogic jDriver for Oracle with support
for distributed transactions.
Everything works fine with the non-XA driver.
We tried the suggestions given here before like setting the environment variable
ORACLE_SID. However, this does not change the errors we get. We use Weblgic Server
6.1 SP2 with oracle 8.1.7 (client and server) under Windows NT.
When attempting to create the connection pool, we get the following exception:
Starting Loading jDriver/Oracle .....
<14.05.2002 15:48:30 CEST> <Error> <JDBC> <Cannot startup connection pool "DiplPool"
weblogic.common.ResourceException: java.sql.SQLException: open failed for XAResource
'DiplPool' with error XAER_RMERR : A resource manager error has occured in the transaction
branch. Check Oracle XA trace file(s) (if any) for database errors. The Oracle XA
trace file(s) are located at the directory where you start the Weblogic Server, and
have names like xa_<pool_name><MMDDYYYY>.trc.
at weblogic.jdbc.oci.xa.XAConnection.<init>(XAConnection.java:58)
at weblogic.jdbc.oci.xa.XADataSource.getXAConnection(XADataSource.java:601)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:200)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:57)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:623)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
The trace file looks like this:
ORACLE XA: Version 8.1.5.0.0. RM name = 'Oracle_XA'.
113105.161:160.160.-1344514975:
xaoopen: xa_info=Oracle_XA+Acc=P/schamper/schamper+SesTm=100+DB=DiplPool+Threads=true+LogDir=.+DbgFl=0x15,rmid=-1344514975,flags=0x0
113105.161:160.160.-1344514975:
ORA-12560: TNS: Fehler bei Protokolladapter
113105.161:160.160.-1344514975:
xaolgn_help: XAER_RMERR; OCIServerAttach failed. ORA-12560.
113105.161:160.160.-1344514975:
xaoopen: return -3
We suspect that we do not set the properties of the connection pool correctly. The
declaration of the pool in config.xml looks something like the following:
<JDBCConnectionPool CapacityIncrement="1" DriverName="weblogic.jdbc.oci.xa.XADataSource"
InitialCapacity="10" MaxCapacity="15" Name="DiplPool"
Properties="user=scott;password=tiger;url=jdbc:weblogic:oracle:srlaptop_aidenbach.muc.sdm-research.de;dataSourceName=DiplPool"
Targets="Marvin" TestTableName="privcust" URL="jdbc:weblogic:oracle:srlaptop_aidenbach.muc.sdm-research.de"/>
Are there any known issues with the XA driver and the versions of oracle and Weblogic
we use? Can someone tell us how exactly we have to define the connection pool or
provide an example?
Any help would be greatly appreciated.
Best regards,
MichaelHi Michael
Here is an example connection pool tag,
<JDBCConnectionPool
Name="oraXAPool"
Targets="myserver"
DriverName="weblogic.jdbc.oci.xa.XADataSource"
InitialCapacity="1"
MaxCapacity="10"
CapacityIncrement="2"
Properties="user=scott;password=tiger;server=ORCL"
/>
Ensure that the server=ORCL is replaced by server=<what ever the Alias is
defined in TNSNAMES.ORA file>
You dont have to specify the URL for this.
hth
sree
"Michael Wufka" <[email protected]> wrote in message
news:[email protected]...
>
Hi everybody,
we have serious problems configuring the weblogic jDriver for Oracle withsupport
for distributed transactions.
Everything works fine with the non-XA driver.
We tried the suggestions given here before like setting the environmentvariable
ORACLE_SID. However, this does not change the errors we get. We useWeblgic Server
6.1 SP2 with oracle 8.1.7 (client and server) under Windows NT.
When attempting to create the connection pool, we get the followingexception:
Starting Loading jDriver/Oracle .....
<14.05.2002 15:48:30 CEST> <Error> <JDBC> <Cannot startup connection pool"DiplPool"
weblogic.common.ResourceException: java.sql.SQLException: open failed forXAResource
'DiplPool' with error XAER_RMERR : A resource manager error has occured inthe transaction
branch. Check Oracle XA trace file(s) (if any) for database errors. TheOracle XA
trace file(s) are located at the directory where you start the WeblogicServer, and
have names like xa_<pool_name><MMDDYYYY>.trc.
at weblogic.jdbc.oci.xa.XAConnection.<init>(XAConnection.java:58)
atweblogic.jdbc.oci.xa.XADataSource.getXAConnection(XADataSource.java:601)
atweblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnec
tionEnvFactory.java:200)
atweblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnec
tionEnvFactory.java:57)
atweblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
ava:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:623
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
The trace file looks like this:
ORACLE XA: Version 8.1.5.0.0. RM name = 'Oracle_XA'.
113105.161:160.160.-1344514975:
xaoopen:xa_info=Oracle_XA+Acc=P/schamper/schamper+SesTm=100+DB=DiplPool+Threads=true
LogDir=.DbgFl=0x15,rmid=-1344514975,flags=0x0
113105.161:160.160.-1344514975:
ORA-12560: TNS: Fehler bei Protokolladapter
113105.161:160.160.-1344514975:
xaolgn_help: XAER_RMERR; OCIServerAttach failed. ORA-12560.
113105.161:160.160.-1344514975:
xaoopen: return -3
We suspect that we do not set the properties of the connection poolcorrectly. The
declaration of the pool in config.xml looks something like the following:
<JDBCConnectionPool CapacityIncrement="1"DriverName="weblogic.jdbc.oci.xa.XADataSource"
InitialCapacity="10" MaxCapacity="15" Name="DiplPool"
Properties="user=scott;password=tiger;url=jdbc:weblogic:oracle:srlaptop_aide
nbach.muc.sdm-research.de;dataSourceName=DiplPool"
Targets="Marvin" TestTableName="privcust"URL="jdbc:weblogic:oracle:srlaptop_aidenbach.muc.sdm-research.de"/>
>
Are there any known issues with the XA driver and the versions of oracleand Weblogic
we use? Can someone tell us how exactly we have to define the connectionpool or
provide an example?
Any help would be greatly appreciated.
Best regards,
Michael
Maybe you are looking for
-
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the fol
-
PDF email merge / PDF email distribution.
I have created the mail merge in Word (2010) that creates individual pdfs that get attached to an Outlook (2010) email. However, I want to do the following: > have the mail message use the vote option > have the mail message have request a re
-
Hierarchy in selection screen shows Short Text, I want to change it to Med
Hi It seems that the selection popup of Hier is using the Short Text of the Charc. Can I change it to use Med Text? I tried in the Query, it only changes the way the Hier is presented in the reort and not in the selection screen. Thanks Edan
-
MB51 : add field not included in MKPF or MSEG table
Dear. I need to show a new field in MB51. This field isnu2019t included in MKPF or MSEG table. I cannot add it in Customizing , do you know an exit for doing this ? Thanks.
-
I have tried uninstalling firefox and reinstalling it and it's still not working. Why won't it establish a connection all of a sudden? I'm browsing using internet explorer just fine, but I want to use firefox.