Problem Creating MR Results for MR and Billing Order after Reversal

Hi Experts,
After Creating Meter Reading Order and Results i have done Reversal of Meter Reading and when i again tried to create Meter reading Results for same MRU i am unable to create Meter Reading Results. I was able to create MR Order, but not Results. Please advise me how can i create MR Results again and why i am unable to create the same.
Thanks,
Kushal

Hi Kushal,
Looks like you have configured independent validations - 05, 06 0r 07 for your validation class at SAP Utilities --> Device Management --> Meter Reading --> Validations --> Allocate Independent Validations to Validation Classes.
If you have maintained independent validations - 05, 06, or 07, then you need to maintain tolerance limits at SAP Utilities --> Device Management --> Meter Reading --> Validations --> Define Tolerance Limits for Validation Classes.
This tolerance limit config is missing. Either you maintain tolerance limit or remove independent validations - 05, 06 or 07 from your validation class.
Hope this will resolve your issue.
Regards,
Avinash

Similar Messages

SUGGESTION TO ADOBE: PLEASE CREATE A PROPER FORUM FOR SUBSCRIPTION AND BILLING ISSUES

I think and many will agree, that it is about time that Adobe would create a forum just for subscription or billing issues.
There are so many people looking for help that taking this issues to a specific forum, would help in reducing the signal to noise ratio and keep a focus on specific topics. Yes, Adobe should fix these issues and I am sure they are being address but creating proper channels would speed up support, from Adobe staff and from people that, for crazy reasons, volunteer here.
I try to help, but sometimes just the Creative CLoud forum is like a raging river of people looking for help and if it was divided in some topics, it would be a great help. So:
- Create a Creative Cloud membership and Billing issues: It is about time
- How-to and technical issues are still well served by the topics.

Hi Luis,
Welcome to Adobe Forum,
I completely apprehend your point of view, the billing issues deal with credit card information which are highly secured information, there is only one authorized group taking care of billing issues.
Regarding Invoice issues, please feel free to raise it here, we do try to resolve them at the earliest.
The direct link to Adobe Support is http://adobe.ly/yxj0t6
Regards,
Rajshree

Table for shipping and billing documents ?

hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.

Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka

I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server. Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create Standard text for terms and conditions of po print form

Hi anybody,
I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
How i will do ? anybody please tell me.
Thanks
S.Muthu.

Hi Subramaniyan,
                         U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
Text Name         &**-EBELN&
Text Object       EKKO
Text ID              xxxx
Language          &**-SPRAS&
is the data at your end .To simplify more follow the following.
1> go to your purchase order from me23n
2> open any purchase order and click on the terms and conditions text.
3> go to GOTO option of the text.and click on the HEADER.
4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
The long texts arestored in STXH table.
Reward Points if useful.
Cheers,
Deepthee Kasal

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

Is there a way I can create a folder for storage and put on desktop?

Is there a way I can create a folder for storage and put on desktop?

What you can do is move them into a sub folder where they are all grouped into one icon. Gets them off your screen, sort of.

How to create fxplug transition for xcode and quatrz composer

how to create fxplug transition for xcode and quatrz composer?

Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
   Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
   Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
   User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Create an infotype for Training and Events

Hello SAP HCM Community,
Does anyone have a step-by-step procedure on how to create an infotype for Training and Events (specifically for External Persons - H)?
I also need to find out how do I edit an existing Training and Events or PD infotype, i.e. to add fields or remove them?
Kind regards
Dorianne

Hi Dilek,
Firstly before I give you the example please advise if IT1690 is a SAP standard infotype?
Example:
When creating a Business Event (E) via transaction PSV2, PV10 or PV11 I want certain rules to be in place when the user selects the following:
When selecting an option under 'Location' for example "Internal", the user will then go to "Organizer Data". Under "Organizer Data" there will be a drop down list of A, B or C. For "Internal" Location the user should only pick option B, so if they select any of the other options and attempt to save the transaction will be stopped with an error with a message, i.e. " Incorrect Organiser Data Captured for Internal".
I look forward to your response.
Kind regards
Dorianne

Do we need to create message interfaces for idocs and rfcs thatare imported

do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaces

hi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

JoBautista,
you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

Problem in Sourcing sequence for plant in Sales Order.

Hi
I am facing problem in Sourcing sequence for plant in Sales Order.
If in Sales order i am selecting material then system is picking plant automaticly 8635 which is worng. For customer XYZ/ ship to ID ZXY, system should pick plant in sequence 5400 - 2300 - 5050.
Could you please confirm what is exactly problem and what seeting i need to check.
pls confirm

But it is defind for material master.
Because 8635 existed in materila master so system determines 8635 plant into your sales order.
You can set only one plant as automatic else you can enter manually in sales order.
If you automatic as 5400 then assign in Customer material info record or Customer or material master any where you can maintain.

Release strategyu for contracts and purchase order

Hi,
My client want both contracts and release orders (purchase order created w.r.t contract) must to go to release approval before procuring the material or service.
Is it possible to configure seperate release strategies for contact and purchase order?
Please let me know.
Thanks in advance.
Regards
Kishore.

Hi,
Thanks for your replies.
Characters for contract will be
1. Company code
2. Aggreement type
3. Target value
4. Purchase group
Characters for Purchase order will be
1. Company code
2. Dodument type
3. Net value + VAT(Gross value)
4. Purchase group
BASED ON THE ABOVE CRITERIA, PLEASE LET ME KNOW HOW TO CONFIGURE. Release strategy for purchase orders already existing in the system as mentioned above as per the mentioned characteristics. Now i need to configure for contracts only.
Please help me in this regard.
Regards
Kishore.
Edited by: Jyothula Kishore on Feb 2, 2010 7:37 AM
Edited by: Jyothula Kishore on Feb 2, 2010 12:01 PM

Problem Creating MR Results for MR and Billing Order after Reversal

Similar Messages

Maybe you are looking for