Problem during executing MC8G transaction

Hi,
I have created inactive plans in MC88 and transferring it to demand (in active) , for this I am using background scheduling MC8G transaction. But system is unable to transfer any plan and status of batch is always coming as canceled.
Please let me know how do I rectify this problem.
Regards,
Pavan

Hi,
Try these two options.
1. Planning job is created via MC8D >Job is changed via MC8E > deletion of job is done via MC8F.
2. Planning job is created via MC8D > Job is changed via MC8E (Reset the job before re-execute the Job)
Regards,
Lok

Similar Messages

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

Problem in executing FS10N transaction code -

Hi All,
I am executing FS10N transaction code, in selection criteria for company code, I have selected multiple selection tab. Here in ranges tab, I have entered " 01 to 32" Company codes range. Then I am receiving the following message "ONLY SELECT COMPANY CODES WITH SAME FISCAL YEAR".
I am sure that all the selected comapny codes are having same fiscal year variant.
Please advise me what is the problem and what should I do to rectify it.

Hi chandra,
This problem occur because you had been posted documents for some company code with another fiscal year variant and changed afterwards.
Enter in OBY6: Utilities - Changed logs - Display status.
You can display companies codes balances with same document posting period.

Problem during executing Command Prompt

Hi All
My current code is executing system commands through java programme,like �dir�,�date� itc.Whenever I run the code the desired output comes.But when I am running the code continuselly then lots of command prompt open regularlly.
Is there any way to stop the code from execution untill unless the command prompt get closed manually?Here is my code.
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.IOException;
interface IPerlService
     public String BZMCreateZone(String s);
     public int BZMRenew();
public class Sample
     public void BZMCreateZone()
          Runtime runtime;
          Process process;
          String s=null;
          String str=null;
          try
               runtime = Runtime.getRuntime();
               process =runtime.exec("cmd /c start dir");
               str=process.toString();
          try
               process.waitFor();
               catch (InterruptedException e)
               e.printStackTrace();
               BufferedReader reader = new BufferedReader(
               new InputStreamReader(process.getInputStream()));
          s = reader.readLine();
          catch (IOException ex)
               ex.printStackTrace();
     public static void main(String[] args)
          Sample obj_Sample= new Sample();
          obj_Sample.BZMCreateZone();
}

I want to execute below commands programmatically.
devenv D:\TestApp\TestApp.sln /rebuild release
devenv D:\TestApp\TestApp.sln /rebuild debug
But I am not able to set the current directory path as "D:\TestApp\" programatically.
Through which API I can execute multiple commands on command prompt programmatically same as  we do manually on cmd.
Why can you "not able to set the current directory path as "D:\TestApp\" programatically"? Are you forgetting to escape the backslashes?
Why to you need to set the current directory anyway?
What is the problem with executing multiple commands?
As to your basic goal, have you looked at
system()
ShellExecute()
ShelExecuteEx()
CreateProcess()
? Perhaps you should show us what you have tried.
David Wilkinson | Visual C++ MVP

Problem while executing SAP transactions

Dear All,
When I am executing transaction like ME21N, ME51N its going to ABAP runtime error.Below is the runtime error description will you please go through it.
Type group was changed at runtime.

What happened?
Error in ABAP application program.
The current ABAP program "SAPLMEACCTVI had to be terminated because one of
The statements could not be executed.
This is probably due to an error in the ABAP program.

Error analysis
The type group "MMPUR" was changed while the program was running, so that an
inconsistence occurred at runtime.
The type group "MMPUR" has the version 20050805102540.
The program "%_CMMPUR" uses the version 20051012133357.
The internal session was started at 20051121083436.
Please give us the solution as soon as possible...
thanks in advance...
Nagesh Aswartha

Hi Nagesh Aswartha,
While you on the Debug, try put break points at all the occurences of the message. You do this by just pressing the enter key after /H. Once its in Debug mode follow the path
On the Menu, Breakpoints->Breakpoint at->Statement. At this point you get one pop up. In the Pop up write 'MESSAGE' and press enter. Break point inserted at every occurences of the message and you go on press F8.
Check the place where u r getting the error, and analyze the values in it. You may come to know what is the error and how it is coming in.
probably this may help you.

Problem during transport of transaction variant.

Hi Experts,
Can any one tell me, the creation of transaction variant is client specific or not????
As because a new transaction variant created through transaction code 'SHD0' is not getting transported properly from one client to another client.
Kindly suggest a solution.
Thanks & regards,
Rupam.

Hi,
You can make it client specific as well as transportable.
When saving your transaction variant in SHD0, if you select Package as "$TMP" or press Local Object button, your variant is client specific.
If you want to transport it to another client, get the relevant package number from your Technical person or BASIS person, Then enter that package when saving. You'll get a transport Request number after giving the relevant Package.
Then you can transport without any issue
Creating transaction Code for that variant
When you are back on the Transaction Variant (SHD0) screen, press Shift+F6 or click the goto
menu and press the create variant transaction button.
Through this transaction SE93 will be executed. Enter the transaction name you want to create
and any other required field and now press the save button.
Tick u2013 Cross Client.
EG:
Transaction Code u2013 Z Transaction code that going to use in future
Transaction u2013 Standard Transaction code
Transaction Variant u2013 Variant that created.
At the point of saving get the transport request.
Best regards,
Anupa

Problem during recording of CJ01 transaction for BDC

Hello All,
I am facing a problem during the recording of CJ01(Creation of projects) for creation of BDC program.
The problem is during recoding after entering the the first WBS element with level 1 and i press the '+' button to create one more WBS element with Level 2,the first WBS element with level 1 goes to the bottom of the line item table and now if try to create the WBS element with Level 2 in the first line it wont allow because of the fact that the first WBS element with level 1 is below it.
But if i enter the first WBS elemnt with level 1 in the first line and come to the next line and enter the second WBS element with level 2 it will create since Level 2 WBS is below the Level 1.But this approach cannot be used for doing a recording for BDC.
Can anyone help in this regard
Thanks in Advance
Ashish

Hi Ashish,
NW is right. It is not proper to use BDC for CJ01. You can get more control and better if you use the following function module,
1. Use BAPI_PROJECT_MAINTAIN to create project definition and WBS Structure in one go. see the documentation in the BAPI on how to use this. Post the resut in this forum if you face any problem
Ravi

BEA-010026 Exception occurred during commit of transaction Xid...

Srs,
Does anyone know how can i change the IP address bellow ? is there any file with this configuration ? ( i dont know so well weblogic )
This is a unkown IP (10.26.71.28) and probably for this reason, the following error appears:
<Mar 31, 2010 1:53:48 PM BRT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-012A4C55A4FA8C6F67D0(13881631),Status=Rolling Back. [Reason=javax.transaction.SystemException: SubCoordinator 'AdminServer+*10.26.71.28*:7001+tdws_domain+t3+' not available],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=167,seconds left=55,XAServerResourceInfo[JMS_ADMLoggingStore]=(ServerResourceInfo[JMS_ADMLoggingStore]=(state=rolledback,assigned=adm_managed_server),xar=JMS_ADMLoggingStore,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(state=new,assigned=AdminServer),xar=weblogic.jdbc.wrapper.JTSXAResourceImpl@15d1298,re-Registered = false),SCInfo[tdws_domain+AdminServer]=(state=rolling-back),SCInfo[adm+adm_managed_server]=(state=rolledback),properties=({weblogic.jdbc=t3://*10.26.71.28*:8080, START_AND_END_THREAD_EQUAL=false}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=adm_managed_server+146.250.132.247:7001+adm+t3+, XAResources={weblogic.jdbc.wrapper.JTSXAResourceImpl, JMS_ADMLoggingStore},NonXAResources={})],CoordinatorURL=adm_managed_server+146.250.132.247:7001+adm+t3+): javax.transaction.SystemException: SubCoordinator 'AdminServer+*10.26.71.28*:7001+tdws_domain+t3+' not available
at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1045)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:173)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:163)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2007)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
--------------- nested within: ------------------
weblogic.transaction.RollbackException: SubCoordinator 'AdminServer+10.26.71.28:7001+tdws_domain+t3+' not available - with nested exception:
[javax.transaction.SystemException: SubCoordinator 'AdminServer+10.26.71.28:7001+tdws_domain+t3+' not available]
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1687)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:311)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Thanks,
Claudio
Edited by: user1098890 on 31/03/2010 12:35

Did anyone ever find an answer to this? I have the same problem.

Exception during commit of transaction in wli when using oracle database

I have configured oracle Database instead of pointbase in wli 9.2
While getting the response through callback in wli process (from Worklist console)this errror is coming "Exception occurred during commit of transaction ".
What should I do to remove this error??
Stack trace is
<Jan 6, 2007 5:19:59 PM CST> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transac
tion Xid=BEA1-012806F477B49C8F6264(7312912),Status=Rolled back. [Reason=weblogic.utils.NestedRuntime
Exception: Error in beforeCompletion],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=
0,seconds left=60,XAServerResourceInfo[WLStore_oracle1domain_cgJMSStore]=(ServerResourceInfo[WLStore
oracle1domaincgJMSStore]=(state=rolledback,assigned=AdminServer),xar=WLStore_oracle1domain_cgJMSSt
ore1269044,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(Ser
verResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(state=rolledback,assigned=AdminServer),xar
=weblogic.jdbc.wrapper.JTSXAResourceImpl@14c0a31,re-Registered = false),SCInfo[oracle1domain+AdminSe
rver]=(state=rolledback),properties=({weblogic.jdbc=t3://199.81.36.226:7001}),local properties=({mod
ifiedListeners=[weblogic.ejb.container.internal.TxManager$TxListener@1442c7b], class com.bea.wli.bpm
.runtime.JpdContainer$TxnListener1168125300187=com.bea.wli.bpm.runtime.JpdContainer$TxnListener@1313
24d}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=AdminServer+199.8
1.36.226:7001+oracle1domain+t3+, XAResources={WLStore_oracle1domain_cgJMSStore, WLStore_oracle1domai
n_WseeFileStore, WLStore_oracle1domain__WLS_AdminServer, weblogic.jdbc.wrapper.JTSXAResourceImpl},No
nXAResources={})],CoordinatorURL=AdminServer+199.81.36.226:7001+oracle1domain+t3+): weblogic.transac
tion.RollbackException: Unexpected exception in beforeCompletion: sync=weblogic.ejb.container.intern
al.TxManager$TxListener@1442c7b
Error in beforeCompletion
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java
:1782)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.
java:331)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:227
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:463)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4060)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:3953)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4467)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
.>

Did you get a solution to this problem ?I am seeing similar exceptions intermittently .
Thanks,
Meena.

Error when executing the transaction SXMB_IFR (PI 7.00)

Hello All,
When I am executing the transaction SXMB_IFR I am getting the following message in the bottom.
The message is "Enterprise Services Builder address not maintained" and nothing is opened, I mean I am in the initial screen only.
And when I tried to check ditectly using URL "http://<hostname>:<port>/rwb/index.jsp" and tried to click on " Component Monitoring " it is giving the error "java.lang.NullPointerException" .
And when I tried to click on "Performance Monitoring" it is giving the error as follows
"5 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered - Attempt to create JCo connection object failed for domain null - Integration Server unable to specify a JCo client - No component names available from Integration Server - "
Can any body tell me how to correct this error.
Thanks,
Sekhar.

Hi Sekhar,
Have you tried SLDCHECK
All the service User/Password are maintained in exchange
profile(not advisable to change though)
http://<hostname>:5<sys_number>00/exchangeProfile
If ur changing it u might need restart of Web AS.
Run transaction SLDCHECK and see if ur getting any errors.
also check this link for sldcheck
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Connection to SLD does not work
Connection to SLD does not work
/thread/202496 [original link is broken]
Please go through the following link:
Problem with SLD connection
Problem with SLD connection
Also,
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Step 41 "configuring system landscape directory" runs forever during instal
It was solved with OSS note 764176.
Please read OSS note carefully.
connection to SLD failed
Reward points if this helps
Regards
Pragathi.

Problem in creation of transaction code !!!

Dear Friends,
I have created a transaction code for my program and when i am executing the transaction code initial screen is coming but once i am executing nothing is happening and it is going to the easy access screen.Where is the problem?
Thannks & Regards,
Murali.

HI,
You might have selected the Radio Button Program and screen (dialog Transaction)
Select the radio button Program and Selection Screen(Report Transaction)
Delete the transaction and create the again..selecting the proper radio button.

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

RFC connection problem during SRM - R/3 integration

Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt                  1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm.   (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223                                ThReceiCPIC-Erthxxhead7192

Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann

Problem during transport

Dear All,
Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
The error is "Request after end mark"
One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
Thanks for ur help....
regards;
jee

Hi,
The "Request after end mark" will be displayed due to the following:
Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

Problem during executing MC8G transaction

Similar Messages

Maybe you are looking for