Vendor Change in item conditions for ME21N

hi frnds,
in me21n, i have placed 1 more vendor in header section. now i need to pass this vendor in item condtions for some condition types. for this, i have gone thru LMEKO002 enhancement. in this enhancement i am not able to get any data of item conditions.
helpful answers will be rewarded by points.
thanks in advance.
regards,
balu

Hi Thomas,
i have tried it. but in that item conditions are not coming. in that enhancement we can get the details of item only. but my requirement is, i need to change the vendor for some specific conditions in each item only.
ex: assume that item no. 10 have 5 conditions. in that for 2 conditions should pickup the main vendor and another 3 conditions should pickup another customised vendor which i was given in header.
Hi Prabhu,
i am trying on Badi.
Regards,
Balu

Similar Messages

Header Condition changing to Item condition

Hi Gurus
I have a header condition ZXXX, Client want to change to item condition manual condition and for only ZOR order type only, for this abaper written rounite and working fine.
But if i made ZXXX header condition to item condition. Does system have any errors with existing open sales orders, deliveries. i have not made any changes in pricing procedure. Will anything changes in conditions of items and header level like subtotals, totals etcs...
Thanks
Ramki

Thanks for your inputs Lakshmipathi, for header condition it is there as manual check in pricing procedure, iam doing this ZXXX as item condition and as manual condition in pricing procedure. if i check this, i do not need to put access sequence in condition type.
I have a test case - before i change ZXXX as item condition i have created sales order without deliery, with delivery & PGI, and with invoice.
so after changeing item condition, if i goto open sales order header--> conditions and come back its ZXXX is converting to item condition. if i goto item conditions and come back, its not changing anything.
Please suggest how to go about this.
Regards
Ramki

Need help to change line item text for 220 Line items

Hi Specialists,
The user has posted a reversal entry ( doc type : Manual Accrual) using TCODE FBS1.
It has 220 line items.
Is there a way in SAP he can change the text of All Line Items for a particular document number in one shot ( Mass Change).
Pls note : Header text remains same . Only the line item text needs to be changed in one shot .
For Eg :
1 50 2758000047 Accruals for CAS               Accrl - Dec 08 / Nalini Marketing(Door Mats) - Oth
2 50 2758000047 Accruals for CAS               Accrl - Dec 08 / SKC - M&E Repair
Changed Description:
1 50 2758000047 Accruals for CAS               Accrl - Jan 09 / Nalini Marketing(Door Mats) - Oth
2 50 2758000047 Accruals for CAS               Accrl - Jan 09 / SKC - M&E Repair
Thanks,
Abhinav.

Hi
This is possible, please follow as below:
If it is GL (FBL3N), Customer (FBL5N), Vendor (FBL1N) line item use the TCODE' mentioned.
In the selection screen, if possible give all the document numbers (it is possible with addition selection).
Once you get the output with the line item, select all line items and go to the menu options there you can see the mass change option, it will give one popup screen give the new value in the text field and proceed further.
VVR

How does it work Item Conditions for a PO

I need to retrieve the correct price of a material in an agreement, depending of the validity period. I noticed that, clicking in the button: Item Condition I obtain the right ammount.
I also noted that the value that I need is KONP-KBETR, but I need to know how to move from table EKPO to this table KONP (How are they linked - fields - )
TIA

I think the best way for you is to put a break-point in 'pricing' and then use ME32 (I think) to change the contract. Go to the condition screen and add an entry, this will force the flow through the fm, I hope. Then you'll be able to see the parameter values that get passed into 'pricing' and can try to simulate that in your own program.
Also, you could run ME32 in SE30 and have a look at the db tables being used. That might tell you where the conditions are held.
If you have no joy with the contract transaction try and do the same thing with ME22N instead to see how pricing should be used.

Changing Header/Item condition after billing has been done

Hi,
I have an issue in which the sales order is incomplete but invoicing has been done. On seeing the change log I found that new condition type has been added after generation of invoice.
Now the user wants that entire header/item condition screen should be greyed out after creation of billing document. can it be done through config or user exit is the way,
My apologies if I posted at a wrong thread.
Thanks
Subhadeep

Hi,
There is no mechanism to find out if the billing document has been created and sales order will allow changes to pricing even after creation of invoice.
The point is that, it doesnt matter if the sales order is changed after the invoice has been created, since the values from SO has gone into billing.
However, if you still wish to lock changes to order once it is billed, kindly refer to some userexit like MV45AFZZ which works during sales order processing and you may get the billing status from VBUK and VBUP tables.
Regards,
Amit

Item condition for only one particular sales order type, manual condition.

Hi Gurus
We have one condition ZXXX, item condition and it should process manually for one particular order type, ZOR. it should not process for other document types like ZOR1 etc.
i did create condition table with S.org/dis chn/div/ sales.doc type. and kept in access seq. and same in condition type ZXXX. and mainatined condition record as with sales area and doc type ZOR.
condition type settings ate like item condition and manaula entries - no limitation.
in pricing procedure i didnt checked manaul, mandoatry and statistic.
but whn iam craeting in ZOR1 and giving manually condition ZXXX, its accepting but as per our condition record it should get only for ZOR... where iam missing the seeting, please suggest.
Thanks
Ramki

Hi Ram,
In my point of view i think so you have to create the new document pricing procedure.
after creating that you have maintain new item catergory determination procedure using the new document pricing procedure created before.
assign this document pricing procedure to your ZOR document type.
now create new pricing procedure by copying the standard one.
after that do the assigning procedure for the pricing procedure by using the new document pricing procedure.
then try to create the order with ZOR and also with ZOR1
Make sure that your condition type is not assign to any other pricing procedure.
if it happens then let me know also.
Suneet Prakash

Change Open Item Management for GL accounts

Hi All,
Good Day.
I would like to asked if you have any idea on how to solve the error we encountered upon opening our open item management for our GL? The error is Line item total does not tally with account balance. Message no. FH099.
We have a Z* program customized from program RFSEPA02, we test it out in our QA and it was working fine. Even if the GLs has balance in QA.
But when we transfer it in Production, we encountered this kind of error.
Any idea how to solve it, i tried reading other questions on this forum with the same error, but i cant find any solution specific for this error.
Please help.
Thank you.

Hi,
See the Note 203329 - RFSEPA02 generates FH099 alth. balance = item total
Symptom
Report RFSEPA02 generates the error message FH099: 'Line item total does not tally with account balance' although the item total tallies with the balance and SAPF190 does not show any differences.
Additional key words
RFSEPA01, FIINCON
Cause and prerequisites
Open item management has already been activated once and items were cleared so that cleared items exist in the system for the account. These are not taken into account during the check of the item total with the account balance and cause the error message.
Solution
Reset the clearing transactions using Transaction FBRA.
Thanks & Regards,
Shashi Kanth

Change Open Item management for FX valuation

Hi,
We have one case here where one GL had Open item management and it was revaluated with open items using an adjustment account. It ws done for a while and the user realize that this account was needed to be revaluated with the same account.
Therefore, they remove the "open item" mark to the account and fill the "Exchange rate diff key" in the master data and set up the KDB transaction for the FX valuation without open item. But the system is still working as before, the account is revaluated with the Adjustment account instead with the same account. It seems that the change from "open item" to NON open item is not working.
Any advice?
Thanks a lot,
Adela.

Hi,
See the Note 203329 - RFSEPA02 generates FH099 alth. balance = item total
Symptom
Report RFSEPA02 generates the error message FH099: 'Line item total does not tally with account balance' although the item total tallies with the balance and SAPF190 does not show any differences.
Additional key words
RFSEPA01, FIINCON
Cause and prerequisites
Open item management has already been activated once and items were cleared so that cleared items exist in the system for the account. These are not taken into account during the check of the item total with the account balance and cause the error message.
Solution
Reset the clearing transactions using Transaction FBRA.
Thanks & Regards,
Shashi Kanth

Validating vendors in PO item conditions of BAPI_PO_CREATE1

Hai friends,
BAPI_PO_CREATE1 is not validating the vendors of item level conditions(BAPIMEPOCOND-VENDOR_NO).
But I have to validate those vendors existed in SAP or not. please help me.
regards,
Eswar.

before passing the data to any screen using bdc(session method or call transaction) or bapi methods you need to validate the data from its check tables say you asked the vendors is not validating u should check the data from lfa1 table whether the vendors are available or not this is nothing but data clensing.
and each record entered in the bapi function module should be fully data validated i.e the data should 99.99% save in the data base table of concerned tables like ekko,ekpo in this case ie. this is nothing but data prusing.
write select statements to lfa1 table & delete the records if in flat file given there is no vendors matched to database tables before passing the vendors to bapi_po_create functionmodule

When material price changed (sd item conditions)

Hi all,
when material price changed in the time that is used in an sd order and when this order's delivery has been created..
the order's item's material's price has been changed before invoice printed(assume item as 10 and material assume as 600300)
i need to update that order with the new price of the material.
Even this can be done backward. I mean you may have an order that amount is 100,000(with different item no's) and send this at 20 times and may print 20 different delivery for this order. And order can be on January and you still send the janu's order at May. Whenever you send the delivery you have to update the respective item's price not others.
All in all i want to update the order's price item by item...
please write any way to solve this.
Thanks..

Hi,
it does not matter if the BADI is already implemented. You can add your additional logic there. If you put break points in all methods of BADI implementation and run ME2xN then you will see when is each method called. You are right that here is no BADI method SET_DATA. What I meant is that you get a reference to PO item (type IF_PURCHASE_ORDER_ITEM_MM) in BADI method PROCESS_ITEM. This interface has to methods GET_DATA and SET_DATA. Using these methods you can get current item fields and change them according to your needs.
Cheers

SA/PO item condition not followed during Goods Receipt

Hi! Gurus,
Could you please help in resolving the our issue on SA/PO item condition. Thanks.
During GR via MB01 of Scheduling Agreement/Purchase Order the FI document posting does not follow the SA/PO item condition for Gross Price, Customs - % and Broker - Qty
The ff. notes has already been implemented in the SAP System
OSS1278540 u2013 Exchange rate diff.calculated incorrectly for delivery costs
OSS1335622 u2013 MIGO: Incorrect stock postings for group conditions
OSS1394939 u2013 MIGO: Incorrect posting for delivery costs
OSS1422885 u2013 MIRO: Error M8 100 "Table T169P: entry does not exist"
OSS1520698 u2013 MIGO: Exchange rate difference for delivery costs
Edited by: Karl Nikolai Jamoralin on Aug 22, 2011 9:49 AM

Same problem we have faced after implementation of budgetory changes.
SAP recommanded changes in program.
Check with sap support.
Regards
Vijay

Vendor Open Line Item Report

is there a report out there to display Vendor Open Line Items only for Asset Puchases??
Thank you

When you purchase an asset, How does your transaction look?
Like for example, when you use transaction code F-90 with vendor accounting entry will look like
31 (Credit Vendor) - 100USD - Account Type 'K' (Vendor)
70 (Debit Asset) - 100 USD - Account Type 'A' (Asset)
As you can see above, for my Vendor line item, the off-setting entry was done to a fixed asset which will have account type A. That is why I asked for entering account type "A" in your report to show up only those line items which have an offsetting entry to a fixed asset.
So, it depends on how your acquisition transaction looks like. There has to be something field that differentiates open items related to asset transactions with other regular transactions like document type, reference, etc... which you can use to isolate asset related open items.
Shail

Report to Display Vendor Open Line Items

is there a report out there to display Vendor Open Line Items only for Asset Puchases??
Thank you

Dear Expert,
In FBL1N we can find the line items according to your requirement through the "Dynamic Selections" select the Particular vendor or Vendor Group for selecting a total group and , Document , Document Type select the AA Document type and Select the Open items Radio button and also you can select Open at key date enter the date up to which you want to view., And Execute.
Regards,
Shankar K B

Work item display for step : Deadline Missed

Hi,
Parked invoices for one of the vendor is not triggering the work item in the workflow inbox.
But the status is showing as complete. Appreciate if provide guidance how to analyse the issue.
The message is read as below:
Deadline Missed: Invoice# 5106117758 PO# 4567819 Vendor# 10300
Work item display for step " Deadline Missed: Invoice# 5106117758 PO# 4567819 V " called...
Message no. WL223
Thank you

Hello,
"i looked in SWI1 to see who processed it. But it is not showing any parituclar agent name. "
Maybe nobody has process it, which is why it went overdue and passed the deadline.
If it's a dialog task and it's completed then there must be an agent attached to it.
Look in the workflow builder to see how the deadline is set up for that step. It could be that it just issues a notification.
regards
Rick Bakker
hanabi technology

Item Conditions in ISA b2c catalog

Hi,
I need to get the item conditions for the porducts in the web catalog and show them in the catalog page in ISA b2c 5.0.
Any pointers how to achieve that !
Regards,
Kunal

Hi James,
I have seen a similar problem in CRM ISA 4.0 on an early SP. It was however rectified in further patch releases. Please check in SAP OSS for updates.
Regards,
Ashok.

Vendor Change in item conditions for ME21N

Similar Messages

Maybe you are looking for