Problem during Java configuration

Hi
I have installed JAVA recently
when I type java -version I can find the complete information
and when I type javac -version it says it is not an internal or external command.
when I type echo %path% it gives me the path I have set in the environmental variables.
What is the reason for this error. How can it be rectified?

pvk296 wrote:
Hi
I have installed JAVA recently
when I type java -version I can find the complete information
and when I type javac -version it says it is not an internal or external command.
when I type echo %path% it gives me the path I have set in the environmental variables.
What is the reason for this error.You installed a JRE but not the JDK. and/or you set the path to a JRE but not a JDK.
How can it be rectified?Set the path to a JDK if one is installed. If not installed - install it

Similar Messages

Problems during ADSUser Configuration for Adobe Document services

Dear Netweaver experrts,
I'm trying to activate a Adobe Document Service on my local Netweaver 2004 WebAS sp20.
I realized that my system is missing the appropiate user and grups which have to be configured
using the Visual administrator and the Security Provider mask.
My problem is that I can't create a user or group in my Security provider mask. The Create user and create Groups buttons are grey.
So I don't know which settings are wrong on my system and prevent the creation of new users and groups within the Security provider configuration.
Can you provide any hints ?
Best regards,
Daniel

Hi Danile,
Check whether you got the permissions to access Security Provider.
If you got the permissions then you will find the pencil button above runtime tab in that screen.Click on that and it will allow you to create users.
With regards,
Pradeep.B

Problem during SLD configuration

Hello frnds,
I am getting error and unable to start the data suplier bridge of my LOCAL WAS..
getting following error
No SLD target system for updates defined. Set Update local SLD to true, or define additional SLDs to be updated.
please suggest
regards
Shobhan
Message was edited by: Shobhan

Hello frnds ,
got the solution...
in Data Supplier Bridge Administration make the update local sld = true..
thanks
Shobhan

We encountered a problem during use the Configtool access JAVA engine.

We encountered a problem during use the Configtool access JAVA engine.
Our environment of system as below:
HardWard: IBM i570
OS: IBM as/400 V5E3
DB: DB2/400
Application system:SAP XI 3.0
The problem we encountered as below:
Our company used XI 3.0 SR1 for exchange data between SAP R/3 and no-sap system.For now,we wanna create a backup system(for
offline recovery),so we backup the XI product system throught entiry system save in AS/400(we stopped the XI system before
save process start).And following,we restored from the tape that we save from XI product system to the new backup system(they
are whole different paratition),but the problem is coming.Describe as following item:
1. The application seem to can be started but the java node always restart circularly(We have 4 java node now),I think
because of different of hardware configure(between XI product and Backup system) and lack of hardware resource.(XI prduction
have 5 CPUs and 22G Mem,Backup system have 2 CPUs and 16G MEM ).Therefore we wanna decrease the number of java nodes for
start application in backup system(throught configtool).
2. We wanna use configtool to decrease the java nodes for start backup system.But we encountered a problem during running the
configtool ,the information of prompt dialog as following:
Error occurred while working with Configuration (Scanning).
Msg:Error while connecting to DB.
We also see the system.log that below the directory of usr\sap\PXI\DVEBMGS00\j2ee\configtool,and found some error as
following text:
#1.5#C0000A0008A8000000000000017A906E000423BFFC7246E0#1165207387826#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS
[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5#C0000A0008A8000000000001017A906E000423BFFC73A670#1165207388006#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jce_export.jar#
#1.5#C0000A0008A8000000000002017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jsse.jar#
#1.5#C0000A0008A8000000000003017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_smime.jar#
#1.5#C0000A0008A8000000000004017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_ssl.jar#
#1.5#C0000A0008A8000000000005017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
w3c_http.jar#
#1.5#C0000A0008A8000000000006017A906E000423BFFC9C25A0#1165207390660#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStore
FSResources#
#1.5#C0000A0008A8000000000007017A906E000423BFFC9C4CB0#1165207390670#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5#C0000A0008A8000000000008017A906E000423BFFCAC7D38#1165207391731#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure
store.#
#1.5#C0000A0008A8000000000009017A906E000423BFFCDA3070#1165207394726#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5#C0000A0008A800000000000A017A906E000423BFFCDB41E0#1165207394796#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnect
ionFactory#######Thread[main,5,main]
##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error
occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester
cannot establish the connection. (XIPRD)#jdbc:as400://XIPRD/SAPPXIDB;transaction isolation=read uncommitted;data
truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor
hold=false#<null>#
The "SQL error occurred on connection" happened during start run configtool.
We don't know how to solve this problem.
Thanks

I am unable to start my configtool.bat to administer JVM memory settings for my J2EE.
Wait......
Thanks

Problem during installation oracle database configuration assistant FAILED

Hi Dear,
The Configurations are :
VM OS : Oracle enterprise linux 5
Trying to install : Oracle 11g R1
I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
Here is the long message showed by console :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
/u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please help me it's urgently

Please help me i can't find any solution to resolve this trouble
Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
Sorry but i have no idea
Waiting for the response

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

Error during java migration tool kit phase

Hi All ,
We are migrating the BI 7.00 EHP1 from (Win 2008/SQL 2008) to Target (Win 2008/SQL 2008).This is a export/Import based method using sapinst tool.
Import stopped at the "Java Migration Toolkit" phase.The following are the error logs , if anybody faced same issue please help with your inputs.
runJmt.log
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
at com.sap.sdt.jmt.migrationtool.ConfigurationHandlerFactoryManager.getConfigurationHandlerFactory(ConfigurationHandlerFactoryManager.java:63)
at com.sap.sdt.jmt.migrationtool.MigrationToolUtils.getSourceConfigurationFactory(MigrationToolUtils.java:178)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:260)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
... 13 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The port number error_con is not valid.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
... 18 more
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
at com.sap.sdt.jmt.migrationtool.ConfigurationHandlerFactoryManager.getConfigurationHandlerFactory(ConfigurationHandlerFactoryManager.java:63)
at com.sap.sdt.jmt.migrationtool.MigrationToolUtils.getTargetConfigurationFactory(MigrationToolUtils.java:190)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:262)
at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1561)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
... 13 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The port number error_con is not valid.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
... 18 more
Could not initialize the offline configuration managers.

Hi,
First check you port numbers as per error, that port is not use.
The port number error_con is not valid.
Also check this sap note
1788188 - Couldn't connect to DB during java install
Then also check this link with same problem, suggestion is replacing the default kernel from DVD with later one.
http://scn.sap.com/thread/1203147
KInd Regards,
Johan

Problem during installation of NW7.0 SR3 on Windows x64

Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
                     For detailed information see the log file of the Deploy Service.
                     Exception is:
                     com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                          Nested exception is:
                          java.net.SocketException: Connection reset
                     java.net.SocketException: Connection reset
                          at java.net.SocketInputStream.read(SocketInputStream.java:168)
                          at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                          at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
     at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PM

Hi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Please read my problem when I configure Weblogic https

I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
Thanks

Moderator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked.

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Problem during deployment of axis (stock) examples

Hi all
I am getting problem during the deployment of stock example given in the apache site.
Even i am not getting the right response from the URL
http://localhost:8080/axis/services/Version?method=getVersion
and
http://localhost:8080/axis/EchoHeaders.jws?method=list.
I am using tomcat 4.1 and JDK1.4.
I have set all the jar files in the axisclasspath.
At the deployment i am using the commond
C:\tomcat4\webapps\axis\WEB-INF\classes>java -cp %AXISCLASSPATH% org.apache.axis.client.AdminClient -lhttp://localhost:8080/axis/services/AdminService samples\stock\deploy.wsdd
and getting fault as
Processing file samples\stock\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}Server.NoService
faultSubcode:
faultString: The AXIS engine could not find a target service to invoke! targetService is null
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}hostname:Divyakant-verma
If anybody has solution please let me know
Thanks in advance
Divyakant Verma

I too am having the same issue and I am using the Java2WSDL and the WSDL2Java to create both the WSDL and the WSDD and I still get Server.NoService when I try to use the AdminClient to deploy the wsdd?
I have tried using both 1.2 and 1.2.1.
I am going to try to use an older verison to see if this is a bug..
If any one know the answer to this deployment problem please speak up.

Problem during installation of Integration (SAP BO 2007) with CLUSTER

I've a problem during the installation of SAP BO Integration version 2007 SP00 PL15.
The InstallShield Wizard make a test to connection to SQL Server database SBO-COMMON and the test have a negative result:
"Unable to connect to database; verify database server name and that database is started".
I've alredy installed the integration without problem on a normal server, but this problem is on a cluster.
More information of the system are:
- Windows enterprise 2003 SP1 (2 server cluster fail over)
- SQL Server 2005 SP2 (cluster)
It seems that it can't find the SQL on the cluster.
Thanks and help me!

dear Teun,
Is important to know well SQL Server 2005.
Go to Programs->MS SQL Server 2005-> Configuration tools-> SQL Server Configuration Manager.
Into the window, select: SQL Server 2005 Network Configuration -> Protocols for MSSQLSERVER > TCP/IP
Here, you must set the IP address of your server (Ex. 192.168.0.55), not Dynamics Address.
In the "all" instance, specify the Dynamic port 1433.
Now, you can install Integration without problems (is not necessary set the node name in tha installation wizard, because the system is not able to select it)
Regards
Flavio

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

Problem during Java configuration

Similar Messages

Maybe you are looking for