Problem encountered in Cluster Communication for WLS 6.1 SP2
Hi,
Currently, we have an admin server with 2 clusters of managed servers. We realise
that the managed server in the cluster will communicate with the other servers
in the other cluster using port 7001. Is there any way to stop the communication
between the 2 clusters, as this causes our servers to hang when one of the managed
servers is hanged? Thanks.
We are using WebLogic 6.1 SP 2.
Regards,
apple
They are different. We have configured them differently.
"Sree Bodapati" <[email protected]> wrote:
>Is the multicast address for the two clusters different?
>
>sree
>
>"apple" <[email protected]> wrote in message
>news:[email protected]..
>>
>>
>> Hi,
>>
>> Currently, we have an admin server with 2 clusters of managed servers.
>We
>realise
>> that the managed server in the cluster will communicate with the other
>servers
>> in the other cluster using port 7001. Is there any way to stop the
>communication
>> between the 2 clusters, as this causes our servers to hang when one
>of the
>managed
>> servers is hanged? Thanks.
>>
>> We are using WebLogic 6.1 SP 2.
>>
>> Regards,
>> apple
>
>
Similar Messages
-
Problem encountered in Cluster Communication for SP2
Hi,
Currently, we have an admin server with 2 clusters of managed servers. We realise
that the managed server in the cluster will communicate with the other servers
in the other cluster using port 7001. Is there any way to stop the communication
between the 2 clusters, as this causes our servers to hang when one of the managed
servers is hanged? Thanks.
We are using WebLogic 6.1 SP 2.
Regards,
appleOur application is running on a server in cluster mode. how will this affect the
communication bet clusters?
"Wenjin Zhang" <[email protected]> wrote:
>
Unless your cluster servers run on port 7001 and you have your applications
from
one cluster talk to another cluster. Check your application flows first.
"apple" <[email protected]> wrote:
Hi,
Currently, we have an admin server with 2 clusters of managed servers.
We realise
that the managed server in the cluster will communicate with the other
servers
in the other cluster using port 7001. Is there any way to stop the communication
between the 2 clusters, as this causes our servers to hang when oneof
the managed
servers is hanged? Thanks.
We are using WebLogic 6.1 SP 2.
Regards,
apple -
Authentication problem by external ldap server for WLS 7.0
Hi all,
I have configured iPlanet directory Server to serve as authentication security
provider for WLS 7.0.While doing so I have created a Test security realm and made
it as default.I have also configured the other default settings for the remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false -Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: User weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
RitwikThanks Vijay - it has worked by creating the Administrator group in LDAP but Weblogic
documentation also states the creation of any group in Ldap server with the boot
username and pwd and then adding the group in the admin role of WLS7.0 - but this
did not work.
If there is any info regarding the same - pl. do let me know
Regards,
Ritwik
"Vijay" <[email protected]> wrote:
>
Ritwik,
I think WebLogic 7 requires a group called "Administrators" in the LDAP
server
and requires an user to be added to that group. I have this working in
one of
my projects. The group really doesnt need to be an LDAP administrative
group.
Can you provide any additional information. I might be able to help since
I got
this working only a coupla days back.
Vijay
"Ritwik Batabyal" <[email protected]> wrote:
Hi all,
I have configured iPlanet directory Server to serve as authentication
security
provider for WLS 7.0.While doing so I have created a Test security realm
and made
it as default.I have also configured the other default settings forthe
remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups
with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false
-Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading
configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security
initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364><Server
fail
ed during initialization. Exception:java.lang.SecurityException: User
weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to bootthe
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik -
IIS Plug for WLS 6.1 SP2: The specified procedure could not be found.
I get an the following error message "The specified procedure could not be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1 sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas KlemmingThank you for posting your answer, and then solution! :> I was fighting
with my IIS/WLS installation last night when I was about to give up, I came
across your posting. Although I'm playing with 7, I thought I would try
reading your posting anyways, and thankfully I did. What I saw, reminded me
to look at the steps one more time and I found I wasn't forwarding the
.wlforward piece on! So thank you veyr much! :>>>>
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
Fixed it.
I had mapped .wlforward to iisforward.dll instead of iisproxy.dll
/Jonas
"Jonas Klemming" <[email protected]> wrote in message
news:[email protected]..
I get an the following error message "The specified procedure could not
be
found." in my browser when trying to use the IIS-proxy plugin on WLS 6.1sp2
Windows 2000
Has anyone else encountered this message? Any solutions?
Regards,
Jonas Klemming -
Problem with apache plug-in for WLS 7.0
I have installed the plug-in follow the "Installing an Configurating the Apache
HTTP Server Plug-in" that I have found in bea.
The problem is in the third step of "Installing as a Dinamic Shared Object". The
Apache 2.0.39 hasn´t the program apxs, and I have added the lines in the httpd.conf
and copy mod_wl.so in libexec folder. When I test apache server give a problem:
Invalid Commmand 'AddModule'Hi SivaKumar,
Yes I am using SP13 and I went through the note you referred.
I am still confused, because my problem is not exactly reflecting in the note.
I have no applications assgined to my DC as such.
I am just trying to test this - that if I change the language parameter and set the condition which is false, that change should not reflect on the client.
What do you think I can do about it?
Ankur -
WLS 6.1 SP2 and Apache 1.3.26 Windows NT/2000
Hi,
Is there an Apache plugin available for WLS 6.1 (SP2) and Apache 1.3.26 running
on Windows NT/2000?
thanksI've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
I'm running a WLS 6.0 SP2 clustered application on HP-UX 11i. I'm seeing heap and
thread issues on start-up or invocation of my application as I deploy EJB's and create
DB connection pools. These are fairly trivial tasks that don't give me any issues
when starting the first node. It's only when I invoke the second node.
I'm pretty sure that my issue is tied to the following kernel areas:
1. Thread allocation
2. Heap allocation
3. Max Processes per user
Can anyone make some kernel recommendations that might be beneficial to my deployment?
My app runs on NT/2000 and Sun as well, and I haven't seen these issues. I typically
allocate 50 to 100 threads per node (3 nodes on a 4 CPU machine) and allocate about
1GB of RAM per node on a 4GB machine...
Regards,
Steve
I'm running a WLS 6.0 SP2 clustered application on HP-UX 11i. I'm seeing heap and
> thread issues on start-up or invocation of my application as I deploy
EJB's and create
> DB connection pools. These are fairly trivial tasks that don't give me any
issues
> when starting the first node. It's only when I invoke the second node.
>
> I'm pretty sure that my issue is tied to the following kernel areas:
>
> 1. Thread allocation
> 2. Heap allocation
> 3. Max Processes per user
>
> Can anyone make some kernel recommendations that might be beneficial to my
deployment?
> My app runs on NT/2000 and Sun as well, and I haven't seen these issues. I
typically
> allocate 50 to 100 threads per node (3 nodes on a 4 CPU machine) and
allocate about
> 1GB of RAM per node on a 4GB machine...
HP has some kernel tuning guidelines for Java server apps on their web site,
and BEA has some notes as well in their platform support page.
What issues specifically are you seeing?
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Steve Feldman" <[email protected]> wrote in message
news:3cdc046e$[email protected]..
>
-
WLS 6.1 SP2 Cluster fails
Hi All.
we have migrated to WLS 6.1 SP2, now we have a serious problem with the cluster
wihch die after several minutes. Our architecture is several front-ends servers
(concretely servelts, without cluster) make request to back-end (starteles EJB,
DB access). This back-end is compuond by four WLS instances running into 2 Sun
Solaris Machines. The system reports the nexts messages in the weblogic.log.
* backendPlatformA instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformA|129.1027407260379', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
<platformA> <ExecuteThread: '117' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* backendPlatformB instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformB|118.1027407423933', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
<platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformB|119.1027407423933', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
* ioboxPlatfromC instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformC|139.1027407286958', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
<platformC> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* Instancia ioboxPlatfromD
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
<platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
platformA
jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
from cluster view due to PeerGone>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
to the cluster>
####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
<platformD> <ExecuteThread: '102' fo
r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
anaydidos>
####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
<platformD> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because of:
'Server received a message over an uninitialized connection: 'JVMMessage
from: 'null' to:
'1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
Any idea?
Thanks for all
Hi,
We are using Weblogic 6.1 SP2, NT 4.0 and java 1.3.1. We have also encountered
the same error message. We have 1 admin and 2 managed servers. We have tried connecting
in using weblogic.admin to check the idle thread and we are able to connect. However,
when we connect from IIS to Weblogic, the application failed to response. We have
tried connect direct to weblogic but it does not response as well. We have seen
that the idle thread left has been reduced but there is no activites from the
weblogic console. The thread is used but not releasing and the console is not
moving. When we shutdown one of the managed server, the application is able to
process as seen from the console.
We have turned off native io and this behavior is not seen. When we turn on native
io, it appear. So we can conclude that it is related to native io.
Is there any solution or intermediate patch without upgrading to the later SP
Thanks
Rajesh Mirchandani <[email protected]> wrote:
>We are shipping the Jdriver for oracle 816 with SP3. Use the driver
>from .\bin\oci816_8
>
>Manuel wrote:
>
>> Thanks Rajesh,
>>
>> we have another problem since our database is Oracle 8.1.6 and SP3
>jDriver doesn´t
>> support this version.
>>
>> Best Regards
>>
>> Rajesh Mirchandani <[email protected]> wrote:
>> >Upgrade to SP3, if possible.
>> >
>> >Manuel wrote:
>> >
>> >> Hi All.
>> >>
>> >> we have migrated to WLS 6.1 SP2, now we have a serious problem with
>> >the cluster
>> >> wihch die after several minutes. Our architecture is several front-ends
>> >servers
>> >> (concretely servelts, without cluster) make request to back-end
>(starteles
>> >EJB,
>> >> DB access). This back-end is compuond by four WLS instances running
>> >into 2 Sun
>> >> Solaris Machines. The system reports the nexts messages in the weblogic.log.
>> >>
>> >> * backendPlatformA instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformA|129.1027407260379', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
>> >> <platformA> <ExecuteThread: '117' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * backendPlatformB instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformB|118.1027407423933', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
>> >> <platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformB|119.1027407423933',
>bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >>
>> >> * ioboxPlatfromC instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformC|139.1027407286958', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
>> >> <platformC> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * Instancia ioboxPlatfromD
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
>> >> <platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
>> >> platformA
>> >> jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> from cluster view due to PeerGone>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
>> >> 7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> to the cluster>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
>> >> <platformD> <ExecuteThread: '102' fo
>> >> r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
>> >> anaydidos>
>> >> ####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
>> >> <platformD> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because
>> >of:
>> >> 'Server received a message over an uninitialized connection: 'JVMMessage
>> >> Wrom: HJEXXIMQZU
>> >> '1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
>> >> cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
>> >> flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
>> >>
>> >> Any idea?
>> >>
>> >> Thanks for all
>> >
>> >--
>> >Rajesh Mirchandani
>> >Developer Relations Engineer
>> >BEA Support
>> >
>> >
>
>--
>Rajesh Mirchandani
>Developer Relations Engineer
>BEA Support
>
>
-
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
How can i retrieve purchased audiobooks that were not synced (problem encountered during sync process)? My account shows the purchase history, but the apps are no longer displayed in itunes or on my ipad or iphone. I'm not very savvy with using iTunes - I don't think is very intuitive (unlike me:)). Any help would be appreciated.
ThanksHello mcegirl4,
Thanks for using Apple Support Communities.
Please refer to the instructions in the following article to assist in downloading those previous purchases from iTunes and the App Store:
Download past purchases
http://support.apple.com/kb/HT2519
Take care,
Alex H. -
Problem starting wls 6.1 sp2
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.ServerHi.
Try placing the wl_management_internal2.war file from the mydomain/.wlstaging directory into the directory your server is expecting.
Regards,
Michael
Peter Buus wrote:
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.Server--
Michael Young
Developer Relations Engineer
BEA Support -
Problems in IDOC receiver communication channel
Hi,
I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
Please assist.
Rgds
KishoreOK in that case, we are getting the following error in the Message monitoring:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
<SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
<SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
Please check and assist.
Rgds
Kishore -
Problem in creating new communication channel template in IR
Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
MarioHi Mario,
This is genral problem appearing in PI 7.0 with SP12.
Previously, i have the same problem.
i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
Regarding this we raise an OSS note SAP people.
they gave the suggestion that update with SP13.
i discuss with basis team and install the SP13.
now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh. -
Problems with MSA - IPC communication
Hello.
We experience some problems with MSA -> IPC communication on our Mobile Clients.
The version of CRM is 7.0.
The problem seems to be related to mobile clients switching status (online | offline | vpn connected | disconnected | etc).
It is difficult to predict the behaviour of a general salesperson, but regardless when the mobile client is awaken and MSA is already running, the connection to the IPC should work, right ?
I wonder if anyone else has experienced any problems related to this ?
Our platform is Windows 7, we use Checkpoint vpn-client.
From what i've seen during testing, the problem is not consistent, it arises at odd times but it seems to be related to Network/VPN connection.
What we have done is edit the tomcat\conf\server.xml file to bind tomcat to localhost address: 127.0.0.1. I've not been able to reproduce the problem when binding tomcat to this address. However, i would really appreciate any feedback on this matter.
BR Gerhard.Does the user has Admin rights for the laptop ?
Rgds,
Shobhit -
Examples.cluster.rmi for WebLogic Server 11g
How can I get package examples.cluster.rmi for WebLogic Server 11g?
I would like to perform a similiar test like the following:
https://freepaper.taichung.gov.tw/examplesWebApp/examples/src/examples/cluster/rmi/package-summary.html
Thanks a lotHi,
I have just now installed WLS via the net installer, and the default examples server password of welcome1 does indeed work for me.
However, I note from your post that you are using port 7101, not 7001. Could that be the issue?
http://localhost:7101/console/login/LoginForm.jspKevin
Maybe you are looking for
-
How do I download MplayerX from the App store?
I am trying to download MplayerX from the App store but I seem to hit a brickwall on accessing the page requiring further information. Has anyone got an idea how to get round this problem?
-
How would I go about adding a program to Bridge's Open With command. I find that my workflow goes better with Photoshop 7 on the majority of my projects. This has to do with what I do so please don't ask why I don't use PS CS4. <grin><br /><br />If
-
Voice Recorders and Garage Band
I am very new to Garage Band and I'm not sure it can do what I need it to. I need a voice recorder that I can edit. I am familiar with Sony's voice recorders and their editing software, but I haven't seen anyone make Mac compatible editing software f
-
Developing, Deploying, Managing Web Services with Oracle9i
HOWTO: The "Hello, World!" Sample Project Follow these steps to create, compile, and run a simple Java program in JDeveloper: 1.Create a project. Choose File | New Empty Project. A new project node, with a name resembling MyProject1.jpr will appear i
-
Max HDD Size for Satellite 3000 -514 with BIOS 2.30
Hi folks ! What is the largest HD size notebook recognizes with BIOS 2.30. I found no FAQ information ragarding this BIOS version. Thx for your help.