Problem facing in creating a Blanket PO

Hi all,
When i am trying to create a Blanket PO i am getting an error : PO is not updated in Table and getting an error like error during insert in table EKKO & update was terminated.

If the update termination error was triggered during saving the PO, please go to message in the PO and change it to "send thru own transaction" instead of send immediately. It may help u.
Regards
TGB

Similar Messages

Problem faced while creating database in oracle 10g

SQL> get C:\Oracle_Docs\ex\dbcreation_script\DBCREATIONSCRIPT
1 create database db_test
2 logfile group 1 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO01.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO02.rdo') size 100 m,
3 group 2 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO03.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO04.rdo') size 100 m
4 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\system01.dbf' size 32m
5 SYSAUX DATAFILE 'C:\oracle\product\10.1.0\oradata\orcl\testdb\SYSAUX.DBF' SIZE 325M
6 undo tablespace testundotbs
7 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\undo01.dbf' size 40 m
8 default temporary tablespace test_temptbls
9 tempfile 'C:\oracledb\testdb\tempo1.dbf' size 40 m
10 character set WE8MSWIN1252
11* national character set AL16UTF16
12 /
create database db_test
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01504: database name 'DB_TEST' does not match parameter db_name 'orcl'
create spfile = 'C:\oracle\product\10.1.0\db_1\database\spfiledb_test.ora' from pfile = 'C:\oracle\product\10.1.0\admin\orcl\pfile\init.ora'
ERROR at line 1:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file
'C:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\PFILE\INIT.ORA'
Message was edited by:
user525645

i have the init file which contains my database name.i have tries asking one sir regarding this. he checked out my problem but couldnt get the solution.he told he'll check it out and tell...he 's telling ther is 25% chance in installation problem.
my init.ora file
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=db_test
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.1.0\admin\orcl\bdump
core_dump_dest=C:\oracle\product\10.1.0\admin\orcl\cdump
user_dump_dest=C:\oracle\product\10.1.0\admin\orcl\udump
# File Configuration
control_files=("C:\oracle\product\10.1.0\oradata\orcl\testdb\control01.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control02.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orclXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
Message was edited by:
user525645

Problem facing while creating a SOA-MDS Connection in JDEVELOPER

Hi,
I am trying to create a new SOA-MDS connection by choosing the RESOURCE PALETTE > NEW-CONNECTION > SOA-MDS.. When I am selecting connection it's not populating the Select MDS Partition dropdown. Its giving the error :Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
WARNING: Error reading db partitions for connection name MDS_CONN. Reason :
Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
Any Suggestions Regarding This issue....
Thanks in Advance..
Edited by: 947267 on Oct 19, 2012 4:11 AM

I uninstall my Jdeveloper and created new MDS connection now its working..

Problem facing while creating DataSource through visual admin utility

Hi,
I have created my database on shw6ur-3\tdemand_1 machine where shw6ur-3 is machine name and tdemand_1 is database instance. Still now we used to create database on the sqlserver machine without databaseinstance . This is first time we have installed separate database instance tdemand_1 on the machine. I am entering parameter through visual admin->serverices-> JDBC connector to create database parameter are server name: shw6ur-3\tdemand_1 and database:ABC.
But it is not allowing me to create the DataSource.
I am having the doubt on server name.
Does anybody know how to create DataSource to connect to particular database on particular database instance.
regards,
Chandan

If you connect as sys you have to specify that you want to connect in the role of sysdba or sysoper.
In the connection dialog you'll find a drop down box where you select sysdba instead of normal.
Timo

I am facing problem while i create a xls sheet with some Header.

I am facing problem while i create a xls sheet with some Header.
If i give the hed names as FirstName , LastName its comming fine.
FirstName | LastName
--------------------------|------------------------
But when i specify a string like New"Deal , New"approach .
= "New"Deal " | =" New"approach" .
--------------------------|------------------------
Problem is:
It's adding = sign in front of the header name.
I dont want that = to be in front of the headername.
//rep.addColumn((String) itr.next());
The above code is used to add the header name to the xls sheet.
The argument will come as New"Deal
But after seeing xls it has become ="New"Deal "
Edited by: SUNJava2008NY on Jun 12, 2008 11:38 PM

What is the tree structure created for the property of the componentB?
Can you try the below code in your componentB jsp and check whether you are getting the property value
Resource resource = slingRequest.getResource();
String description = ((String) ResourceUtil.getValueMap(resource).get(
"./description", String.class));

Problem in MSS - Create Requisition

Hi All,
We implementing E Recruitment on EHP4 sp4. we are facing a strange issue in the MSS-Create requisition request scenario.
We are using standard HCM process HR_MSSRCF_REQUISITION.
MSS user is able to create a requisition and send to his manager for approval. His manager can also approve it. But once the requisition is finally approved, the recruiter cannot see
the requisition in the recruiter dashboard
We have checked the workflow log, its finishing without errors.The e-rec infotype table HRP5131 does not have any new entries for Otype NB, But Manager can see his requisitions from MSS-Requisition Overview iview as completed.
Pls let me know if any config is missing? Do we need to run any background job to update the e-rec tables? There's no error message in any stage of process..still recruiters can't see the new requisition.
Regards,
Smit

Dear Smit,
We are implementing E-recruitment in our Project. We are facing problems with Manger creating requisition page. Its always displaying NO data available.
Can you please let us know if any configuration is to be done for it?
Thanks a lot in advance,
Regards,
Sai

Problem triggerring BKPF.CREATED

Hi experts
I'm facing a problem triggerring BKPF.CREATED. I've configured this event with change doc BELEG, In field restriction I've given BKPF-BELNR-* *
But the event is not triggered while FI invoice created thru FB60. I've implemented note 336305 also as per instructions, but still event is not getting triggerred.
Can anyone suggest what can I do to trigger this event.
Thanks..
Moumita

Hi Moumita,
Have u checked in SWE2 that For BKPF business object's created method event linkage is there or not???
Pls check..it might be d case.
Thanks,
Neel Thakkar.

How to create a Blanket Release in iProc from a approved requistion

Hi Gurus,
How to create a blanket Release in iProcurement from a approved requisition. I have followed the below steps.
1. Created a BPA from Front end.
2. Run Loader Data program.
3. Above program reflected the BPA in iProc.
4. Created requisition from BPA.
5. Requisition has been approved.
After this i am stuck. How to proceed ahead. I want to create a Blanket Release from approved PR and then receive in iProcurement.
please help me on this. We are using 11.5.10.2
Regards,
john

911765 wrote:
Hi Mahendra,
Thank you so much for your reply.
So you mean to say that it all depends upon the Sourcing Rule and ASL based upon that system would automatically create a Blanket Release or If its Automatic Release/Review then we have to manually create release through autocreate.
The reason why i am asking this query is now when i tested it, system is automatically creating release and starngely there is no Sourcing Rule and ASL has been defined.
But we are looking for a Manual Release through autocreate window.
It would be great if you could please suggest.
Regards,
JohnJohn,
When you say system is automatically creating release..as far as i know...it should be referencing a PO..correct...in the releases window..
can you pull that up..and see if you can get any clue..bcz that PO would BPA...
Also I am not that much into Iproc...I don't know...whether Iproc has some other setups
HTH
Mahendra

Adobe Acrobat Pro XI problems printing PDFs created from AutoCAD.

Just installed Adobe Acrobat Pro XI and am having problems printing PDFs created from AutoCAD. Printing other PDF created by MS Word works well. Had a similar problem in an earlier version of Pro. The fix I figure out then was to print the PDF file as another PDF. Using the second PDF to print to a plotter typically worked. It does not work for Adoabe Acrobat Pro XI.

Hi presottom
Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
or
Let us know more details about it to help you better ?
What is the OS ?
is there any error message , etc .. ?

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Problems faced by me using the 5700

I bought the nokia 5700 a month ago and it has been this way since then. I face a few problems which i wish were added in a update for the firmware by nokia. Is there anyway to inform nokia about this?
Problems faced by me:
1)In the log after switchin the mobile on and after about a day or two when i call from the log i.e pressing green button on a contact or going into options and selecting voice call. Nothing happens. No call can be made from the log. It is very annoying cause everyone directly calls from the log upon seeing the miss call... Though the call can be made from the contacts list and everywhere else, u can dial a number and call. The problem is just with the log(fixed by turning the mobile off then on but eventually the same thing happens)
2)The time and date when set as a screensaver does not appear all the time, the screen maybe blank or time maybe shown.
3)This is going to be very weird, i have a habit of just seeing emergency numbers such as 911 and 112 appear when the phone is locked, when i dial these keys sometimes the numbers appear and sometimes they dont.(again fixed by turning the mobile off then on)
4)This is the BIGGEST FLAW FOR THE 5700 FOR ME, if you have noticed (i dont know abt other 5700's but this is the case with mine) in the log if you have contacts having numbers which can be divided into home ,mobile,etc. When you see the log no matter wherever the call came from you see a mobile icon.This again is very annoying cause you dont come to know where the call came from and after a miss call, u would have to go in options, use number, edit number and then see it. Or by calling and seeing the number for a brief moment. So you can accidentally dial at someones home though you dont want to and even they didnt call from their home.
Anyone having these problems?
Nokia 5700 has been out for 3 months over here i guess we deserve updates for the firmware. Dont we?
And though i get these problems i can still say with dignity that 5700 is cool.
btw If i format do i lose any themes installed on the phone memory? Cause i downloaded this theme from nokia once and you dont get it any more for some odd reason.

Go to Nokia Service nearet your location. Ask them for a solution.

TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

pls any body post two very tough support problems faced and solved in real time.
my id is: [email protected]

Hi Priya.,
For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
These are not provided in Standard SAP & we should work out on alternative way
REWARD if helpfull
Thanks & Regards
Narayana

Problems Facing in BDC

Hi All,
I want to know the problems facing in Uploading Xternal file in BDC.
Its very Urgent . Points will be rewarded to good ans.
Bye.

Hi
Many problems can occur while doing bdc like field mis match can occur,Data over lapping between fields etc
Regards
Shibin

Problem with implicitly created Oracle pipes

Hi, I am having a problem with implicitly created Oracle pipes. I am not sure if this is the correct forum for this topic, but I could not see one which suited better..
I am using Oracle pipes as a commiunication mechanism between processes (some are written in PL/SQL and other in PRO*C).
The general problem I have is that if a timeout occurs during the communication process, I end up with 1 or perhaps 2 implicitly created pipes.
The biggest problem for me is that I am unable to determine if a create is implicitly created (via dbms_pipe.send_message or receive_message). This causes problems, since these implicitly created pipes are left behind and not deleted. I'll show you the basic flow of the processes and you shall see my problem.
server: create request pipe "req_pipe"
server: listen for request on requests pipe.
client: create two pipes for comms with server.
client: send request and the names of the newly created pipes to the server.
server: read request and pipename from request pipe (from this point all comms between the client and server are now done over the 2 pipes the client created).
server: send ack message to client to ensure they are still there (since requests can be queued in the request pipe and clients could have timed out before the request is received)
client: send "i'm still here" ack back to the server.
server: process request and send result back to client.
client: send ack back to server to let server know we have received the response.
server: send ack back to client to show that work is now committed.
OK thats the general event flow. I use the rule, that pipes created by a process are removed by a process. So the client always removes the pipes it created in all situations. But since this can happen at any point we can get in the situation:
client: timeout occurs, delete pipes.
server: send message to client (creates an implicit pipe) and therefor works (no errors raised)
server: do a read for response from previous message. (implicitly creates pipe) (will fail).
Now we have two implicitly created pipes! These pipes will exist until the database instance is shutdown, and in a poorly performing environment, we could get thousands of these pipes lying around... not a good situation.
How can I either stop pipes being implicilty created, or how do I detect if a pipe was implicitly created.
I have tried a couple of things, like using v$db_pipes to check if a pipe exists before doing send/reveive calls but this is FAR to slow to do a select on that view.
We have also looked at keeping a record of pipes created by the client then have some process (perhaps the server) clean up these pipes after some time frame. This is a workable solution but is not favourable since it adds extra overhead having to check these pipes often, and created an extra level of complexity which is not required..
Any suggestions will be greatly appreciated.
Feel free to email me with any suggestions on my email provided below, or just post a reply to this formum..
Many thanks,
Karl Bridger
[email protected]

I solved the problem by changing the SOAP massage format from Document/Wrapped to Document/Literal

Problem facing in creating a Blanket PO

Similar Messages

Maybe you are looking for