Problem HDMI connection to new Panasonic TC-60ps34 plasma; tv says no signal but computer detects tv; worked fine on 4 yr old phillips plasma; 2011 macbook pro running os10.6.8.
New 60" Panasonic plasma says no signal won't display picture/sound from 2011 macbook pro running os10.6.8 connected via HDMI with moshi MDP to HDMI Adapter. Same setup on former 4-yr-old Phillips Plasma worked fine (but the tv died!)
dohdoh1985 wrote:
- I tried every Snow Leopard Release from 10.5.8 to 10.6.4
Assuming this means the TV was not detected in any of these versions, this would not be a Snow Leopard installation or setup issue. I think that is what sig is trying to tell you.
If this is true, you might want to post in the MacBook forums to see if anyone has a similar issue. It would be a good idea to post the model number of your Toshiba if you do so, as this might be relevant. Otherwise, it sounds like the problem is in the TV, since the MacBook works with other displays.
Tip: to avoid unexpected formatting oddities that might make your posts hard to read, you can use the "Preview" tab before you post to see how your post will be formatted.
Message was edited by: R C-R
Similar Messages
-
I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?
Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.
-
I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host> -
I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks
I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here -
To be able to work on my older laptop on location I wanted to install Lightroom 2 onto a MacBook Pro which runs 10.6.8
It stops at the end of the installment and tells me to contact Adobe for info.... that's nit very easy anyway.
Has someone a quick clue on where the issue might be?? Thank's a lot already for your help and effort - TomCannot connect after upgrading Firefox
* https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
Firefox cannot load websites but other programs can
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
Check and tell if its working. -
My Wireless J6450 printer repeatedly loses connection to my network & MacBook Pro running OS10.7.2
I previously had successfully set up my OfficeJet J6450 to operate on my wireless home network using an Apple Time Capsule. Now that I've upgraded to Tiger (OS 10.7.2) the printer still recognizes the named network, but keeps losing connectivity and requiring the re-entry of WPA code to re-connect. I can print one or two documents in the next couple of minutes and then connectivity is lost! Again! and Again!
So does the printer actually loose connectivity and you have to re-connect at the printer front panel or does the Mac loose track of it?
If the latter, let's reset the printing system:
- Go to System Preferences > Print & Fax
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Having hard drive problems with 2011 macbook pro
Hey all,
I am having some hard drive issues with a 2011 Macbook Pro running OS X Mavericks.
How it happened: I was browsing the web when suddenly I got the spinny-wheel-of-death. The spinny wheel of death stuck around for much longer than usual, and eventually my computer wouldn't even respond to mouse input (the mouse wouldn't move). Nothing worked, so I did a hard reset of my computer. When I rebooted the machine, it took me into "Recovery Disk Mode".
Here are the diagnostics that I've done: In "Recovery Disk Mode", I have the option to use the Disk Utility, which I have done. My main volume, called "Macintosh HD" is grayed out - and not mountable. When I run "first aid" on it, it is not able to verify the disk because of an "Invalid B-tree node size". It then tells me to repair the disk. I have tried repairing the disk, but it fails - and that is not entirely unexpected because all of the forum posts that I have read up until now say that Disk Utility cannot repair this specific type of error.
3rd party software I have tried: Based on the forum posts that I have read, Disk Warrior is especially capable at fixing this kind of error, so I went to my local computer shop, purchased the software, and booted into it. Disk Warrior did not recognize my drive, and did not even show it in the list of available options.
Other things I have tried: I purchased a Seagate external drive, and I tried to use Disk Utility to copy the contents from my MBP's hard drive over to the external drive, but when I do so, "Disk Utility" tells me that "Recovery partition restores can only be done on GPT partition maps." I have also had it give me another error message where it says it "cannot verify source - error 254".
Additionally, I have seen around the internet that many people try using "fsck" to fix this issue, but I haven't been able to find a good explanation of the proper steps when using "fsck", nor how to specify to the "fsck" program that I want it to fix my "Macintosh HD" volume. I've opened up the terminal, and gone into the "/dev/" folder, but I don't know which item in that folder, or any other folder, would properly lead down the path to my "Macintosh HD" volume. Also, the man pages seem to be of little help here.
One option I would like to try, but I have not been able to, is to try putting my MBP into Target Disk Mode, and see if my desktop machine (a Dell) can see it. The problem here is that my Dell only has USB ports - no Firewire, and obviously no Thunderbolt ports. I would need to find a way to plug my MBP into my Dell while it is in Target Disk Mode, but from what I can tell, that's impossible if I don't have a Firewire or Thunderbolt port on my Dell.
So, now having explained everything I have tried, can y'all give me any advice on how I can recover my drive without completely repartitioning it? Although most of my important data and files are located on cloud services, there are definitely some files on the drive that I don't have backed up, and I would like to recover the drive without losing those files. What suggestions can you give me? Thanks!Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way. -
I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.
If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
-
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?
Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store
Apple's price is $19.99, £14.00, €18. -
I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks
my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank -
I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?
Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
Hi !
I have connect my new i pad with usb cable to my pc but i don't have internet to it.
What can i do?
Thanks
M.TintikakiConnecting the iPad to a computer via a cable does not provide Internet access to either.
What are you attempting to do?
Maybe you are looking for
-
Background job cancelled due to user validation expired
Hi Experts, One background job is cancelled due to user (owner of the job) validation has been expired. This job is executing for every 1 Hr. I don't want to change the user id validation at this movement.but i want to change the owner of the job. Pl
-
Hi, got a problem. My stills taken with external iSight webcam in Photo Booth application are always mirrored (right side is left and vice versa) even though no effects are turned on. How to make pictures look right (real)? Can you solve this? Thanx
-
Some forms are not supporting java 6
Hello all, I am using oracle 9i version for oracle application server .Before I was using jre 1.3.1.17 version but all the forms and reports has been working well on the application server.In the last week i was installed java 6 instead of jre 1.3.1.
-
HELP! Lost User Folder After 10.4.7 Update
HELP! Lost User Folder After 10.4.7 Update!! I did everything I normally do before an upgrade. Fix premissons, etc etc etc.. Ran the combo updater & rebooted.... Checking my HDD & noticed I lost my "jtmadman" folder in my User folder. Any ideas??? Th
-
OTL timekeeper entry - retrieve Hours type
Hi guys, In the Timekeeper(OTL) entry form (where you enter time for multiple workers) there is a 'Hours Type' field . I need to retrieve the 'hours type' field value(As displayed in timekeeper entry screen) for a particular person(say person_id=2222