Problem in accessing the database through VPN

I am having problem connecting to the database through VPN but it is working perfectly fine if i connect to the network directly.
It would be really great if you could help me to resolve this issue.
Thanks

I am having problem connecting to the database through VPN but it is working perfectly fine if i connect to the network directly.Fix the VPN problem.
Check the logfiles.
For better advice provide any meaningful detail.
If I do not poke myself in the eye, it does not hurt.
Tell me to to stop feeling pain.

Similar Messages

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Unable to access the Firewall through ASDM

                   Hi All,
Thanks in advance ,
in my organisatin we are facing one issue with launching of ASDM in ASA 5520 , when wer are trying to access the Firewall through ASDM we are unable to access that , see the java error loggs below , yes i know if we reload the firewall then this problem will solve , but my organisation management donsent want to reload the firewall , other procedure is to upgrage the ASDM version , just let me know the procedure for this
Using JRE version 1.7.0_25 Java HotSpot(TM) Client VM
User home directory = C:\Users\shussain
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
m:   print memory usage
q:   hide console
s:   dump system properties
ASDM Application Logging Started at Tue Aug 20 11:04:48 AST 2013
Local Launcher Version = 1.5.30
Local Launcher Version Display = 1.5(30)
OK button clicked
Trying for ASDM Version file; url =
https://192.168.50.2/admin/
Server Version = 6.1(3)
Server Launcher Version = 1.5.30, size = 319488 bytes
invoking SGZ Loader..
Cache location = C:/Users/shussain/.asdm/cache
Exception in thread "SGZ Loader: launchSgzApplet" java.lang.NumberFormatException: For input string: "1 year 192"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at com.cisco.pdm.Check.h(DashoA10*..:1358)
at com.cisco.pdm.Check.c(DashoA10*..:858)
at com.cisco.pdm.Check.a(DashoA10*..:438)
at com.cisco.pdm.PDMApplet.start(DashoA10*..:132)
at com.cisco.nm.dice.loader.r.run(DashoA19*..:410)

dear marvin,
find my firewall sh version output, and asdm version ,
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
Compiled on Thu 07-Aug-08 20:53 by builders
System image file is "disk0:/asa804-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 1 year 193 days
Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0021.a09a.ba76, irq 9
1: Ext: GigabitEthernet0/1 : address is 0021.a09a.ba77, irq 9
2: Ext: GigabitEthernet0/2 : address is 0021.a09a.ba78, irq 9
3: Ext: GigabitEthernet0/3 : address is 0021.a09a.ba79, irq 9
4: Ext: Management0/0       : address is 0021.a09a.ba7a, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs                : 150
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Disabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 750
WebVPN Peers                 : 2
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2
This platform has an ASA 5520 VPN Plus license.
Serial Number: JMX1304L0HA
Running Activation Key: 0x0313c076 0x58bdf52e 0xa83245ac 0xb460b058 0x88201caa
Configuration register is 0x1
Configuration last modified by enable_15 at 10:18:47.850 AST Wed Aug 21 2013
ciscoasa#
ciscoasa# sh run asdm
asdm image disk0:/asdm-613.bin
asdm location internal-network1 255.255.0.0 internal

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

Problem in bringing the database up

Hi,
I am facing this problem while bringing the database up :-
ORA-01190: control file or data file 21 is from before the last RESETLOGS
ORA-01110: data file 21: '/fnb/dbdevices2/ora10g_scmb/scmbdata06.dbf'
What i did just before that was i brought two datafiles ONLINE one of them is :-
'/fnb/dbdevices2/ora10g_scmb/scmbdata06.dbf' as given in the error.
I have been able to mount the database and when i try to bring these datafiles offline it gives same error
and also i tried to drop the datafile and on doing that i get disconnected from Oracle.
Can anyone please help in this.
Regards,
kapil

you'll want to log an SR to go through this with support. It looks like you took the file OFFLINE a while ago, then did an open resetlogs whilst the file was offline, and then tried the operation you described. In the case of READ-ONLY datafiles where the file header details don't get updated and a similar issue arises then there is a supported procedure to restore the file to the database. In your case I'm not sure if there is a supported route for you to go down.
Niall Litchfield
http://www.orawin.info/

Error in the module RSQL accessing the database interface

I have written the following query.
SELECT a~no
         a~hist_no
         a~chk_stat
         a~chk_date
         a~user as chk_user
         b~name as chk_by
         into corresponding fields of table hist
         from zhist as a INNER JOIN zuser as b on
         auser = bbname
         where pspnr = v_pspnr
         and   chk_no = v_chk_no.
I am getting the dump "Error in the module RSQL accessing the database interface".
Please provide me the solution.
Thanx,
Selva.

Hi,
As i have analysed your query in that you are putting the data in the internal table 'hist' which is also a standard structure and if you check in SE11 'hist' is the standard structure for 'Tablespace History' and might be because of that it is causing the problem.
Kindly check by changing the name of the internal table to tt_hist and then try.
I think that will solve the problem.
Regards,
Harsh Goel

Why can't I access the internet through Firefox?

I can't access the internet through Firefox. It's worked just fine for several years, but it just randomly quit working. I've tried resetting Firefox, uninstalling an reinstalling it, and allowing Firefox through the firewall.

Did you try to remove the current rules for Firefox in the firewall to make ure to create new rules for the current Firefox release?
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I can not access the switch through the console (solved)

Hello,
I'm having a problem.
I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures.
The HyperTerminal settings
error:
If anyone can help me?
Thank you and excuse the bad English.

Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center

We are on holiday in Mexico. Our iPad has no problem connecting to the Internet through a subscription WiFi network. But, both of our laptops can not with the same password. What can we try?

We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
Same location. Signal strength is good.

Since I couldn't figure out a way to edit our original post, here's another potential clue.
Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not.

Problem in getting the database connection from a connection pool

Hai All,
I am facing a problem in getting the database connection from a connection pool created on weblogic server 8.1.
I am using the Oracle database 8.1.7.
I have configured my connection pool, datasource and JNDI in weblogic.
In my java program i have the following code to retrieve the connection.
import java.sql.*;
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.InitialContext;
class jdbcshp1 {
    public static void main(String[] args) {
     Connection connection = null;
     try {
           Hashtable ht = new Hashtable();
           ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory"); // Wanna get rid of this.
           ht.put(Context.PROVIDER_URL,"t3://localhost:7001"); // wanna get rid of this.
           // Get a context for the JNDI look up
           Context ctx = new InitialContext(ht);
        javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("myjndi1");
          //Create a connection object
          connection = ds.getConnection();
     The above code is working fine but, the two ht.put statements are creating problem.
The problem is, after converting the application into WAR file it can be deployed
on any machine or different port on same machine. My application fails if its deployed on
weglogicserver which is at different port.
Is there any way that i can get rid of those ht.put statements or any other way to solve the problem.
any help is appreciated.
Thanks in advance
Pooja.

Hai All,
Firstly, thanks for ur reply.
Even i have seen some code which uses context constructor with out any parameter and works fine.
i dont understand why its not working for my code.
When i remove those ht.put code and use context constructor with out any parameter, it giving an error.
Context ctx = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("ocjndi");
connection = ds.getConnection();The error is as follows:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
the above error is forcing me to include those code but if the port number is changed the code will not work. Plz let meknow if some setting have to be made.
I appreciate all ur valuable help.
Thanks once again.
Pooja.

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

How to use PDA module to access the database of PDA?

I want to develop a program which can access the database of PDA by the pda module. give me some advice!
thanks!

It may help you to know how I add JARs
1. I open my Project (myProject)
2. I Mount the JAR to the FileSystem (like mypackages.jar = which includes com.mus.de.myClass.java)
3. I Mount the File to the FileSystem (like c:\..myfiles..\myProject)
3.1 I add the File to my Project
4. I select File | New -> Classes | Main
4.1 I typed "import com.mus.de.myClass.java" to refer to this package.
4.2 I called some of the public methods
thats it
Andreas

Problem in accessing the ejbs

HI ,
I am New to EJB. Here i am getting a problem n accessing the resoucess which are deployed in weblogic. Here i want to access the resoucess from a jsp. So i declared a web.xml. In that what i need to write. can anybody help me what i can specify in web.xml
Thank you.

Stop asking the same question again and again. It will decrease your chances of actually getting some help, because your rudeness will make people angry and less inclined to help.
Your whole approach sounds wrong, but that's your problem. I'm betting that you don't need EJBs. You shouldn't write JSPs without JSTL. Totally, utterly wrong.
But if you insist, I would recommend that you actually get a book or some documentation that shows you how to call an EJB from a web app. Since you're using WebLogic, maybe reading their documentation will help:
http://edocs.bea.com/wls/docs70/webapp/components.html
%

Problem for Accessing the Table BDCP..CDPOS..CDHDR..

Hi Guys,
i have the problem of accessing the BDCP table.it is working fine in development and testing server.it is taking more time in background in Production server..can anyone help me to optimize this code and please suggest me if i can change anyof the below logic..
Thanks a lot in advance.
LOOP AT t_cdobjid.
    objectid-low = t_cdobjid-cdobjid.
    objectid-sign = 'I'.
    objectid-option = 'EQ' .
    APPEND objectid.
    CLEAR objectid.
    count = count + 1.
    IF count = 50.
      CLEAR count.
      SELECT * FROM bdcp APPENDING TABLE t_bdcp
      WHERE cretime IN r_cretime AND
            tabname = 'DMEAN' AND
            fldname = 'KEY' AND
      cdobjid IN objectid.
      CLEAR : objectid.
      REFRESH: objectid.
    ENDIF.
ENDLOOP.
IF NOT objectid[] IS INITIAL.
    SELECT * FROM bdcp APPENDING TABLE t_bdcp
      WHERE cretime IN r_cretime AND
            tabname = 'DMEAN' AND
            fldname = 'KEY' AND
    cdobjid IN objectid.
    CLEAR : objectid.
    REFRESH: objectid.
ENDIF.
IF NOT t_bdcp[] IS INITIAL.
    t_bdcp_val[] = t_bdcp[].
    DESCRIBE TABLE t_bdcp_val LINES l_lines.
    l_max = 50.
    l_mod = l_lines MOD l_max.
    IF l_mod > 0.
      l_loopcount = ( l_lines DIV l_max ) + 1.
    ELSE .
      l_loopcount = l_lines DIV l_max.
    ENDIF.
    DO l_loopcount TIMES.
      CLEAR t_bdcp_emt.
      REFRESH t_bdcp_emt.
      IF sy-index = l_loopcount.
        t_bdcp_emt[] = t_bdcp_val[].
      ELSE.
        APPEND LINES OF t_bdcp_val FROM 1 TO l_max TO t_bdcp_emt.
        DELETE t_bdcp_val FROM 1 TO l_max.
      ENDIF.
      SELECT * FROM cdpos APPENDING TABLE t_cdpos_upc
          FOR ALL ENTRIES IN t_bdcp_emt
                   WHERE
                   objectclas = 'MATERIAL' AND
                   objectid   = t_bdcp_emt-cdobjid AND
                   changenr   = t_bdcp_emt-cdchgno AND
                   tabname IN ('DMEAN', 'MARA' ) AND
                   fname   IN ('KEY', 'EAN11' ) .
    ENDDO.
    CLEAR   : l_lines ,
              l_mod ,
              l_loopcount.
       IF sy-subrc EQ 0.
    IF NOT t_cdpos_upc[] IS INITIAL.
      t_cdpos_del[] = t_cdpos_upc[] .
      DELETE t_cdpos_del WHERE tabname EQ 'MARA' .
      SORT t_cdpos_del BY changenr .
      LOOP AT t_cdpos_upc .
        READ TABLE t_cdpos_del WITH KEY
                   changenr = t_cdpos_upc-changenr
                   BINARY SEARCH .
        IF sy-subrc EQ 0 AND
          t_cdpos_upc-chngind = 'U' .
          DELETE t_cdpos_upc WHERE changenr = t_cdpos_upc-changenr
                              AND chngind = 'D' .
        ENDIF.
        t_upc_matnr-matnr = t_cdpos_upc-objectid .
        APPEND t_upc_matnr .
      ENDLOOP.
      SORT t_upc_matnr BY matnr .
      DELETE ADJACENT DUPLICATES FROM t_upc_matnr COMPARING matnr .
      IF NOT t_cdpos_upc[] IS INITIAL.
        t_cdpos_upc_val[] = t_cdpos_upc[].
        DESCRIBE TABLE t_cdpos_upc_val LINES l_lines.
        l_max = 50.
        l_mod = l_lines MOD l_max.
        IF l_mod > 0.
          l_loopcount = ( l_lines DIV l_max ) + 1.
        ELSE .
          l_loopcount = l_lines DIV l_max.
        ENDIF.
        DO l_loopcount TIMES.
          CLEAR t_cdpos_upc_emt.
          REFRESH t_cdpos_upc_emt.
          IF sy-index = l_loopcount.
            t_cdpos_upc_emt[] = t_cdpos_upc_val[].
          ELSE.
            APPEND LINES OF t_cdpos_upc_val FROM 1 TO l_max TO
                                                t_cdpos_upc_emt.
            DELETE t_cdpos_upc_val FROM 1 TO l_max.
          ENDIF.
          SELECT * FROM cdhdr APPENDING TABLE it_cdhdr_upc
                           FOR ALL ENTRIES IN t_cdpos_upc_emt
                            WHERE objectclas EQ 'MATERIAL'
                           AND   objectid = t_cdpos_upc_emt-objectid
                           AND   changenr = t_cdpos_upc_emt-changenr.
        ENDDO.
      ENDIF.
Prabhu

Use the PACKAGE SIZE oprion of the SELECT statement:
LOOP AT t_cdobjid.
objectid-low = t_cdobjid-cdobjid.
objectid-sign = 'I'.
objectid-option = 'EQ' .
APPEND objectid.
CLEAR objectid.
ENDLOOP.
SELECT * FROM bdcp APPENDING TABLE t_bdcp
PACKAGE SIZE 5000
WHERE cretime IN r_cretim AND
        tabname = 'DMEAN'   AND
        fldname = 'KEY'     AND
        cdobjid IN objectid.
ENDSELECT.
IF NOT objectid[] IS INITIAL.

I want to access the database with user name and password without con. info/udl

hi to all,
im doing project related with database... normally i'll connect ***.udl file to open database.vi.
now what is my question is I want to open the database with the user name with password.... y i need this because once i run the program the program should ask username and password to open database for write/read operation. if its wrong user name and password means program should be denied...
can any tell how to access the database toolkit with the username with password....
im using labview 7.0...
i think my question is clear....waiting for reply thank you in advance...
pls see this attachment.....
Regards,
N. Srinivasan
Attachments:
access.vi ‏37 KB

i have already read that link in the discussion forum...but im still have some confussion in... i attached file is so like to give user name and password..?
and one more things can tell wat to do in ODBC and MDB and in UDL for password lock.. each time i run the promgram it should ask password to acces the database..
thank you a lot for your reply..
it will be more more useful if u clear my doubts clearly....
Regards,
N. Srinivasan
Attachments:
user=pass.PNG ‏35 KB

Problem in accessing the database through VPN

Similar Messages

Maybe you are looking for