Problem in BAPI_DOCUMENT_CHANGE2 with attachment

Hi Friends,
I am using the BAPI for updating the status from In work to Release in DMS wit attachment.
While executing BAPI_DOCUMENT_CHANGE2 we are facing the problem. I attach a document in CV01N. I enter the details of the document in document files in BAPI
While executing I am getting below Error :
E26 Status can only be set when all originals are stored
But when we are changing the status from IW to FR in CV02N we could able to do without any problem.
How to solve this ?
Regards
Sai Krishna

Hi,
There was some problem in BAPI programm, for that reason I applied following notes to correct it.
First we have to get details from BAPI_DOCUMENT_CHANGE2 then take values to BAPI_DOCUMENT_GETDETAIL2
0000752047
0001122538
0001129747
Regards
Sai Krishna

Similar Messages

Problem sending email with attachment to another person

04-08-2010 02:26 PM - last edited on 04-08-2010 03:05 PM
I will try to keep this short. I downloaded an app on one of my attorneys Curve 8330. It is called Dataworx and lets her dictate then email the file to her secretary to convert and transcribe. I can get a regular email to go through but when I try to send the one with the dictation it doesnt go and I get a message in the "sent using" section that says "unknown (secure)" and then under Message status it says "unable to find specified service" When I use the same app on my Blackberry Storm I can dictate and email the file with no problem and open the attachment. Can anyone help me. I am a bit blackberry illiterate. Thank you.
UPDATE - the emails are finally coming to the intended recipient but there are no attachments on them. Not even anything on our firewall saying they were removed. very frustrating.
We use an in house Microsoft Exchange server for our email and don't have Blackberry Enterprise or Blackberry Internet.

Luca, if one user is able to send attachments, the other should be able to as well. However, if an attachment is too large, it won't be delivered.
Agreed, This does sound like a size limitation issue.
Have the person try to send the same file from his outlook on his PC and see if he can send it out, that should be a good indication.

Problem sending email with attachment by android

Good Morning, I'm Luca.
I have this problem:
through a smartphone with Android system,
synchronized via ActiveSync, the user
is unable to send emails with attachments.
While you can receive them and
open them without problem.
We have a server with Exchange 2010.
Is there any authorization that I have to give
you?
Other devices, always with Android system,
with other accounts of course,
does not have the same problem.
Thank you very much
Best regards

Luca, if one user is able to send attachments, the other should be able to as well. However, if an attachment is too large, it won't be delivered.
Agreed, This does sound like a size limitation issue.
Have the person try to send the same file from his outlook on his PC and see if he can send it out, that should be a good indication.

I have problems sending email with attachment which are larger. What could be the problem?

I can't send larger email form my home wireless system but it works well when I am at work and use their wireless system, so I assume it is a setting in my home wifi account or a problem with accessing the mail server remotely. What shouldI do, as it is annoying.....

Is that my Internet provider?? Thanks and sorry for the stupid question....

Problems using dbms_scheduler with attached network disks

Oracle 11.2.0.1
I created a job which run .bat - files.
dbms_scheduler.create_job(
        job_name => 'JOB_FILES',
        job_type => 'EXECUTABLE',
        job_action => 'e:\dump\abc.bat',
        auto_drop => FALSE,
        enabled => TRUE);
Content of abc.bat is
"E:\Oracle\product\11.2.0\dbhome_1\BIN\7za a e:\dump\den3_arch_171020131420.zip x:\mtr\"
Im trying to make an archive with files in some folder. In this example the folder is "x:\mtr\" where "x" is attached network disk.
When i run this job It creates null archive and raises error
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
If in "abc.bat" i change network disk "x" to server disk with existing folder all works properly(It archives all files).
If i execute "abc.bat" from cmd window all works properly(It archives all files).
Ive created java source
create or replace and compile java source named "OSCommand" as
import java.io.*;
public class OSCommand{
public static String Run(String Command){
try{
Process p = Runtime.getRuntime().exec(Command);
p.waitFor();
return("0");
catch (Exception e){
System.out.println("Error running command: " + Command +
"\n" + e.getMessage());
return(e.getMessage());
and pl/sql function
CREATE OR REPLACE FUNCTION OSCommand_Run(Command IN STRING)
RETURN VARCHAR2 IS
LANGUAGE JAVA
NAME 'OSCommand.Run(java.lang.String) return int';
And it works like dbms_scheduler...
May be user need any special grants?

user617289 wrote:
Thats right. How can i resolve this issue?
when all else fails Read The Fine Manual
DBMS_SCHEDULER

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

Problem for Mail with PDF attachment

Hello all,
I have a problem regarding sending mail with a PDF attachment from SAP. The attachment contains Payslip of employee that is being generated from a Submit program of the respective HRFORM. I have used the Submit program within a JOB and the spool request generated. From the spool request i am extracting the pages using FM RSPO_GET_PAGES_SPOOLJOB.
Now to convert the spool job to PDF am using FM CONVERT_OTFSPOOLJOB_2_PDF. And after the job is being finished, am deleting both the JOB and SPOOL.
To change the output of the FM CONVERT_OTFSPOOLJOB_2_PDF, into attachment with line width of 255 am using FM SX_TABLE_LINE_WIDTH_CHANGE. Then after filling all the required parameters for FM SO_DOCUMENT_SEND_API1, am sending the mail with the attachment. I have kept the format as PDF.
But the problem here is, the attachment is going as .DAT file and not as .PDF file!!!
Please help to resolve this issue.
with regards,
Koushik.

Hello,
Instead of using SO* APIs to send mail you should use the BCS classes. Anyway there is a sample program BCS_EXAMPLE_8 which is very similar to your requirement
Cheers,
Suhas
PS: The sample program BCS_EXAMPLE_6 has got more to do with PDF forms as is your case

Problem in sending email with attachment more than 32kb through utl_mail

Hi friends
I am able to send an email with attachment upto 32kb using utl_mail.
But whenever I increase the size of attachment from 32kb, it prompts me an error.
===============================================
ORA-20001: The following error has occured:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
===============================================
i have also used LONG RAW instead of RAW, bu still the problem is same.
please help me in solving this issue.
Thanks in advance,
Ankur

Yeah that's an issue with UTL_MAIL it only has 3 procedures, and none of them let you send data to the SMTP server incrementally. To send files larger than 32k you will need to switch over to using UTL_SMTP directly or via a helper package such as the [DEMO_MAIL package|http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html] available from otn.

UTL_SMTP mail with attachment( Problem in attaching zip file)

Hi All,
I used the below code for sending email with attachment. but when i try to add the message body its not working in the sense its not attaching my file. when i commented that line its attaching the file.
commented lines:
-- utl_smtp.write_data(mail_conn,UTL_TCP.CRLF ||'Body' ||':'|| text || UTL_TCP.CRLF);
--utl_smtp.write_data(mail_conn,UTL_TCP.CRLF||text || UTL_TCP.CRLF );How to resolve this issue???
Complete procedure.
create or replace
procedure sssl_send_mail (
      p_sender varchar2,
      p_recipient varchar2,
      p_cc varchar2,
      p_subject varchar2,
      p_filename varchar2,
      text varchar2) is
    --c utl_smtp.connection;
    v_raw raw(57);
    v_length integer := 0;
    v_buffer_size integer := 57;
    v_offset integer := 1;
    mailhost    VARCHAR2(64) := 'xxxxxxxxxx';
    port constant number(2):=25;
    timeout number :=180;
    mail_conn utl_smtp.connection;
p_blob Blob;
temp_os_file bfile;
ex number;
begin
   DBMS_LOB.CREATETEMPORARY(p_blob,true);
   temp_os_file := BFILENAME ('xxxxxxxx',p_filename);
   ex := dbms_lob.fileexists(temp_os_file);
      if ex = 1 then
         dbms_lob.fileopen(temp_os_file, dbms_lob.file_readonly);
         dbms_lob.loadfromfile(p_blob,temp_os_file, dbms_lob.getlength(temp_os_file));
         dbms_lob.fileclose(temp_os_file);
       end if;
   mail_conn := utl_smtp.open_connection(mailhost, port,timeout);
   utl_smtp.helo(mail_conn, mailhost);
   utl_smtp.mail(mail_conn, p_sender);
   utl_smtp.rcpt(mail_conn, p_recipient);
   utl_smtp.rcpt(mail_conn, p_cc);
   utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn,'From'||':'|| p_sender || UTL_TCP.CRLF);
utl_smtp.write_data(mail_conn,'To'||':'|| p_recipient || UTL_TCP.CRLF);
utl_smtp.write_data(mail_conn,'CC'||':'|| p_cc || UTL_TCP.CRLF);
utl_smtp.write_data(mail_conn,'Subject' ||':'|| p_subject || UTL_TCP.CRLF);
-- utl_smtp.write_data(mail_conn,UTL_TCP.CRLF ||'Body' ||':'|| text || UTL_TCP.CRLF);
--utl_smtp.write_data(mail_conn,UTL_TCP.CRLF||text || UTL_TCP.CRLF );
    utl_smtp.write_data( mail_conn, 'Content-Disposition: attachment; filename="' || p_filename || '"' || utl_tcp.crlf);
    utl_smtp.write_data( mail_conn, 'Content-Transfer-Encoding: base64' || utl_tcp.crlf );
    utl_smtp.write_data( mail_conn, utl_tcp.crlf );
    v_length := dbms_lob.getlength(p_blob);
    <<while_loop>>
    while v_offset < v_length loop
      dbms_lob.read( p_blob, v_buffer_size, v_offset, v_raw );
      utl_smtp.write_raw_data( mail_conn, utl_encode.base64_encode(v_raw) );
      utl_smtp.write_data( mail_conn, utl_tcp.crlf );
      v_offset := v_offset + v_buffer_size;
    end loop while_loop;
    utl_smtp.write_data( mail_conn, utl_tcp.crlf );
    utl_smtp.close_data(mail_conn);
    utl_smtp.quit(mail_conn);
exception
    when utl_smtp.transient_error or utl_smtp.permanent_error then
      utl_smtp.quit(mail_conn);
      raise;
    when others then
    raise;
end;Please help me out to resolve this issue.
Thanks in advance.
Cheers ,
Shan.
Edited by: Shan on 13 Jan, 2011 1:08 PM
Edited by: Shan on 14 Jan, 2011 3:22 PM

Hi,
Some Problems i am facing with this procedure. when i try to add CC in this procedure. Its sending the mail for recipent , But the CC person not getting the mail. How to resolve this??
create or replace
PROCEDURE sssl_send_mail( p_sender varchar2,
      p_recipient varchar2,
      p_cc varchar2,
      p_subject varchar2,
      p_filename varchar2,
      text varchar2) is
    /*LOB operation related varriables */
   v_src_loc BFILE;
   l_buffer   RAW(200);
   l_amount   BINARY_INTEGER := 200;
   l_pos      INTEGER := 1;
   l_blob     BLOB := EMPTY_BLOB;
   l_blob_len INTEGER;
   v_amount   INTEGER;
    /*UTL_SMTP related varriavles. */
    v_connection_handle UTL_SMTP.CONNECTION;
    v_from_email_address VARCHAR2(200);
    v_to_email_address   VARCHAR2(200) ;
    v_smtp_host          VARCHAR2(10) ;
    v_subject            VARCHAR2(500) ;
    l_message            VARCHAR2(3000);
    /* This send_header procedure is written in the documentation */
    PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
    BEGIN
    --dbms_output.put_line('entering into procedure');
    --dbms_output.put_line(pi_name || ': ' || pi_header);
      UTL_SMTP.WRITE_DATA(v_connection_handle,
                          pi_name || ': ' || pi_header || UTL_TCP.CRLF);
    END;
BEGIN
   v_src_loc             := BFILENAME('BROKERREPORTS',p_filename);
   v_from_email_address := p_sender;
   v_to_email_address    := p_recipient;
   v_smtp_host           := 'sbssld1'; --My mail server, replace it with yours.
   v_subject             := p_subject;
   l_message      := 'test';
    /*Preparing the LOB from file for attachment. */
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
    l_blob_len := DBMS_LOB.getlength(l_blob);
/*UTL_SMTP related coding. */
    v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
    UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
    UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
    UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
    UTL_SMTP.OPEN_DATA(v_connection_handle);
    send_header('From', v_from_email_address || '<'||'>');
    send_header('TO', v_to_email_address || '<'||'>');
    send_header('CC', p_cc        || '<'||'>');
    send_header('Subject', v_subject);
    --MIME header.
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                      'MIME-Version: 1.0' || UTL_TCP.CRLF);
   UTL_SMTP.WRITE_DATA(v_connection_handle,
                        'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        ' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
                        UTL_TCP.CRLF);
   UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Body
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        'Content-Type: text/plain;' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        ' charset=US-ASCII' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                       'Content-Type: application/octet-stream' ||
                        UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        ' filename="' || p_filename || '"' || --My filename
                        UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
    WHILE l_pos < l_blob_len LOOP
      DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
      UTL_SMTP.write_raw_data(v_connection_handle,
                              UTL_ENCODE.BASE64_ENCODE(l_buffer));
      UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
      l_buffer := NULL;
      l_pos    := l_pos + l_amount;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Close Email
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        '--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
                        UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
    UTL_SMTP.CLOSE_DATA(v_connection_handle);
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
EXCEPTION
    WHEN OTHERS THEN
      UTL_SMTP.QUIT(v_connection_handle);
      DBMS_LOB.FREETEMPORARY(l_blob);
      DBMS_LOB.FILECLOSE(v_src_loc);
     sssl_internal_error_track(sqlcode,sqlerrm,'SSSL_SEND_MAIL',NULL);
END;Thanks in Advance.
Cheers,
Shan.
Edited by: Shan on 13 Jan, 2011 12:33 PM
Edited by: Shan on 13 Jan, 2011 1:05 PM

Forms/Designer 10g - problem with attached libraries

I've problem with forms with attached libraries. All of libraries have removed paths. I can run all forms without any problem on my local application server from Forms Builder 9i or Designer 9i. I added all paths in registry FORMS90_PATH. WORKINGDIRECTORY in formsweb.cfg is blank.
Unfortunately I can't do it with Developer 10g on second workstation. I added all paths in registry FORMS_PATH. WORKINGDIRECTORY in formsweb.cfg is blank too. When form is running I get ORA-06508. I can't store all files (fmb, fmx, pll, plx etc.) in one folder because I've to use CVS. In this case I can't set any folder in WORKINGDIRECTORY.

Assuming Forms 10.1.2.x, FMX, MMX, PLX, and OLB files are found based on the value of FORMS_PATH which is set in default.env and not the Registry. This applies to runtime only. The Builder uses the Registry.
Understand that "runtime" refers to any time a form is displayed in a browser, regardless of whether is was started from the Builder or Application Server.
Also, be aware that if you have FMX, MMX, or PLX files which were created in older versions they must be recompiled using the 10.1.2 compiler.

Problems with attached documents in Mail and Docs To Go

Hello everybody.
I've found a problem with attached documents in Mail. In fact, if I click on attached documents with .doc (microsoft office word 97-2004) and files in .docx Office Open .xml, the iPad doesn't open them, also if I click in "Open with Docs To Go (which should support these files' format)".
How can I do? There's an application or another way to open these files?
Other Informations:
Docs To Go version: 5.2.2

Update the patch to the Sapgui.
Regards,
Ignacio.

Problem by Sending an Email with attached Adobe Interactive Form (Code)

Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
But it doens`t send the email.
Can anybody help me please???
Kevin
Here my Code:
Report FP_EXAMPLE_01
Printing of documents using PDF based forms
REPORT z_example_02.
Data declaration
DATA: carr_id TYPE sbook-carrid,
customer TYPE scustom,
bookings TYPE ty_bookings,
connections TYPE ty_connections,
fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
error_string TYPE string,
l_booking TYPE sbook,
t_sums TYPE TABLE OF sbook,
l_sums LIKE LINE OF t_sums,
fp_formoutput TYPE fpformoutput.
PARAMETER: p_custid TYPE scustom-id DEFAULT 38.
SELECT-OPTIONS: s_carrid FOR carr_id DEFAULT 'AA' TO 'ZZ'.
PARAMETER: p_form TYPE tdsfname DEFAULT 'FP_EXAMPLE_01'.
PARAMETER: language TYPE sfpdocparams-langu DEFAULT 'E'.
PARAMETER: country TYPE sfpdocparams-country DEFAULT 'US'.
Get data from the following tables: scustom(Flight customer)
sbook (Single flight reservation)
spfli (Flight plan)
SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
CHECK sy-subrc = 0.
SELECT * FROM sbook INTO TABLE bookings
WHERE customid = p_custid
AND carrid IN s_carrid
ORDER BY PRIMARY KEY.
SELECT * FROM spfli INTO TABLE connections
FOR ALL ENTRIES IN bookings
WHERE carrid = bookings-carrid
AND connid = bookings-connid
ORDER BY PRIMARY KEY.
Print data:
First get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = p_form
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
MESSAGE e001(fp_example).
ENDIF.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = language.
fp_docparams-country = country.
*fp_docparams-fillable = 'X'.
*fp_docparams-langu = 'E'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
*fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
currency key dependant summing
LOOP AT bookings INTO l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
COLLECT l_sums INTO t_sums.
ENDLOOP.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
customer = customer
bookings = bookings
connections = connections
t_sums = t_sums
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
IMPORTING
e_adserrstr = error_string.
IF NOT error_string IS INITIAL.
we received a detailed error description
WRITE:/ error_string.
EXIT.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*********************Send the form*******************
*********************to the Customer*****************
*********************via Email***********************
*IF i_down = abap_true.
DATA: filename TYPE string,
path TYPE string,
fullpath TYPE string,
default_extension TYPE string VALUE 'PDF'.
Data:
lt_att_content_hex TYPE solix_tab.
*DATA: data_tab TYPE TABLE OF x255.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = fp_formoutput-pdf
TABLES
binary_tab = lt_att_content_hex.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL.
DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Vendor Payment Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Vendor Payment Form'
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
lo_send_request->set_document( lo_document ).
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_send TYPE adr6-smtp_addr VALUE '[email protected]'. "Absender SENDER
lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient type ref to if_recipient_bcs value is initial.
Data:
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
*lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
*lo_send_request->add_recipient(
*EXPORTING
*i_recipient = lo_recipient
*i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'.

Hi Kevin,
Please try this code to send your mail, i wrote it and works well in many system.
Take care if in your profile you got an e-mail adress define .
Take care also of trnasaction SCOT customizing, are you able to send mail to e-mail adress ?
Let me know if it's works.
Best regards.
<i>**----
CLASS-DEFINITIONS
DATA: send_request       TYPE REF TO cl_bcs.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
INTERNAL TABLES
DATA: l_mailtext TYPE soli_tab.
DATA: iaddsmtp   TYPE TABLE OF bapiadsmtp.
DATA: ireturn    TYPE TABLE OF bapiret2.
VARIABLES
DATA: mail_line LIKE LINE OF l_mailtext.
DATA: bapiadsmtp         TYPE bapiadsmtp.
DATA: subject    TYPE so_obj_des.
DATA : att_subject TYPE so_obj_des.
DATA : w_except TYPE REF TO cx_root .
CONSTANTS : c_defmail TYPE ad_smtpadr VALUE
                 '[email protected]' .
FIELD-SYMBOLS : <smtp> TYPE bapiadsmtp.
*Convert the pdf given by function module into Binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer     = output-pdf "PDF file from function module
TABLES
    binary_tab = hexa.
*Set subject of the mail
subject = 'Exemple de PDF interactif'.
Set text of the mail
mail_line = 'Merci de remplir le formulaire et nous le retourner'.
APPEND mail_line TO l_mailtext .
Set the name of the attached document
att_subject = 'Template du PDF'.
TRY.
Create persistent send request
    send_request = cl_bcs=>create_persistent( ).
Get sender object
    sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
    CALL METHOD send_request->set_sender
      EXPORTING
        i_sender = sender.
Read the E-Mail address for the user
    CALL FUNCTION 'BAPI_USER_GET_DETAIL'
      EXPORTING
        username = sy-uname
      TABLES
        return   = ireturn
        addsmtp = iaddsmtp.
    LOOP AT iaddsmtp ASSIGNING <smtp> WHERE std_no = 'X'.
      CLEAR bapiadsmtp.
      MOVE <smtp> TO bapiadsmtp.
    ENDLOOP.
    CASE bapiadsmtp-e_mail.
      WHEN space.
No adress main for user, so send it to the default mail adress
        recipient =
     cl_cam_address_bcs=>create_internet_address( c_defmail ).
      WHEN OTHERS.
        recipient =
     cl_cam_address_bcs=>create_internet_address( bapiadsmtp-e_mail ).
    ENDCASE.
Add recipient with its respective attributes to send request
    CALL METHOD send_request->add_recipient
      EXPORTING
        i_recipient = recipient
        i_express    = 'X'
        i_copy       = space
        i_blind_copy = space
        i_no_forward = space.
Set that you don't need a Return Status E-mail
    CALL METHOD send_request->set_status_attributes
      EXPORTING
        i_requested_status = 'E'
        i_status_mail      = 'E'.
set send immediately flag
    send_request->set_send_immediately( 'X' ).
*Build Document
    document = cl_document_bcs=>create_document(
                        i_type    = 'RAW'
                        i_text    = l_mailtext
                        i_subject = subject ).
    add attachment to document
    CALL METHOD document->add_attachment
      EXPORTING
        i_attachment_type    = 'PDF'
        i_attachment_subject = att_subject
        i_att_content_hex    = hexa.
Add document to send request
    CALL METHOD send_request->set_document( document ).
Send document
    CALL METHOD send_request->send( ).
    COMMIT WORK.
CATCH cx_send_req_bcs INTO w_except.
CATCH cx_address_bcs INTO w_except.
CATCH cx_document_bcs INTO w_except.
ENDTRY.</i>

Soap request with attachment --problem in deploye to jboss useing Jdevelope

using Jdeveloper and oc4j application server i made two application.
In application one i exposed a web service method.In this application their is a handler class which able to handle soap request and response with attachment.
In application two a client is sends a soap request with attachment.
If i deploye it in oc4j it is working fine. But if i Deploye to JBoss server [i made a jboss application server connection] and then trying to send the soap request with attachment from the client application i gets the following errors--
Exception in thread "main" javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:152)
     at etrans.TripBean.a.ClientGateWay.msgEnvelope(ClientGateWay.java:50)
     at etrans.TripBean.a.ClientGateWay.main(ClientGateWay.java:60)
Caused by: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:148)
     ... 2 more
Caused by: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:458)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:865)
     ... 4 more
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:516)
     at java.net.Socket.connect(Socket.java:466)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:208)
     at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:202)
     at HTTPClient.HTTPConnection.getSocket(HTTPConnection.java:3115)
     at HTTPClient.HTTPConnection.doConnect(HTTPConnection.java:3858)
     at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:2921)
     at HTTPClient.HttpOutputStream.close(HttpOutputStream.java:421)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.sendMessage(HttpSOAPConnection.java:724)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:373)
     ... 5 more
Am i made any mistake to deploye to jboss or it is not possiable to access the web service in such way?
please suggest me what is the procedure to recover from this.

Hello,
How do you package you WS client application to be deployed in JBoss?
The JAX-RPC clients are not that portable you may need to recompile the client with JBoss WebService implementation/tools, and check that you do have the different deployment descriptors for the client too.
Regards
Tugdual Grall

Problem in opening the Out look with attachment.

Hi All
I have requirement in WEb Dynpro that need to open MicroSoft OUTLOOK with attachment.
Can you please help me in this.
Thanks
Rama

Hi Rama,
I know only one way of an attachment with Outlook open. There are command-line parameters in Outlook.
Here is an example: "C: \ Program Files \ Microsoft Office \ Office11 \ Outlook.exe / a" C: \ My Documents \ labels.doc "/ c ipm.note
I hope I could help.
Best regards
Bettina

Problem in sending mail from database with attachment

Hi All,
I amd using forms10g,oracle10g
I am facing a error while running a procedure to send mail from db
procedure is:
declare
ErrorMessage VARCHAR2(4000);
ErrorStatus NUMBER;
-- enable SQL*PLUS output;
--SET SERVEROUTPUT ON
-- redirect java output into SQL*PLUS buffer;
--exec dbms_java.set_output(5000);
BEGIN
ErrorStatus := SendMailJPkg.SendMail(
SMTPServerName => '192.168.4.2',
Sender => '[email protected]',
Recipient => '[email protected]',
CcRecipient => '',
BccRecipient => '',
Subject => 'hth106: Test JavaMail',
Body => 'This is the body: Hello, this is a test that spans 2 lines',
AuthReqdYNNum => 1,
UserID => 'jagan',
Password => 'songbirds',
ErrorMessage => ErrorMessage,
Attachments => SendMailJPkg.ATTACHMENTS_LIST('C:\oramail\MHTHSO_GEN45.html')
END;
while running this procedure i am receiving following error
"ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IncompatibleClassChangeError"
but the same procedure sending mail from all other user in the same database
I am very myuch confused.i have given the all rights
below mentioned rights are given .it is working in all other user on the same db except this user "hth106". And all the othere things are compared between working user and this hth106 user every things are same.But i am receiving error when i sending mail with attachment if the mail is sending without attachement it is working fine
below rights are given to this user
1.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read');
2.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','write');
3.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','connect');
4.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','resolve');
5.exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','read');
exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','write');
6.call dbms_java.grant_permission('HTH106','java.net.SocketPermission','HTHDS01','resolve');
7.call dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read,write');
7.call dbms_java.grant_permission('HTH106', 'java.io.FilePermission','C:\oramail\*','read');
please advise me to proceed further
Thanks in advance
Thanks ,
Antony

With respects to the following:
The bit you'll have most diffulty with is the attachment, because you can't be sure that
the directory path specified is one that the database can read from. You can probably
resolve this by using some java to move the file to a directory which utl_file can see.Another alternative is to specify a location on then database server where all file attachments MUST be copied to and the define and Oracle DIRECTORY (CREATE OR REPLACE DIRECTORY [dir_name] AS '/dir/name/on/files/system';) that references this location. When you attach a file to an email, then you only have to refer to the DIRECTORY for the file location.
Just my 2 cents on the topic. :-)
Craig...

Problem in BAPI_DOCUMENT_CHANGE2 with attachment

Similar Messages

Maybe you are looking for