Problem in calling RFC of an Function modue

Hi,
I am having two systems ARD and AGD. I am calling a function module which is a RFC enabled in AGD from ARD.
Infact this call is happening in standard SAP Program. But i am not getting the output while calling the function from ARD. If i pass the same values to function in AGD ( Through SE37 ) , i am getting the values.
Please let me know what may be the reason behind this.
And also is there any way to debug while calling the RFC function module.
Thanks in Advance.
Regards,
Pavan.

Hi pavan,
1. Make sure you are using the correct syntax.
CALL FUNCTION 'ZMYFM' <b>DESTINATION 'DESTNAME'</b>.
2. Make sure the DESTINATION
is not blank. (in case u are using some variable for it)
(If it is blank, the function will be called in
the local server)
regards,
amit m.

Similar Messages

Problem when call rfc using function control

i try to call rfc using functin control but error "wdtfuncs error '800a03eb' Fail to call Remote Function Module" be popuped.
my code like that:
Set objSAPFunction = Server.CreateObject("SAP.Functions")
          Set objSAPFunction.Connection = objSAPConn.NewConnection
          IsLogOnSAP = False
          If objSAPFunction.Connection.Logon(1, True) Then
               IsLogOnSAP = True
               'Upload Cancel Invoice
              Set objFunc = objSAPFunction.Add("ZRFC_SD_BILLINGDOC_GET1")
               Set objISGR1 = objFunc.exports("DOCUMENT")
               Set objISGR2 = objFunc.exports("COMPANYCODE")
               Set objISGR3 = objFunc.exports("YEAR")
               set objOSGR1 = objFunc.imports("NETVALUE")
               set objOSGR2 = objFunc.imports("CURRENCY")
               set objOSGR3 = objFunc.imports("DATE")
               set objOSGR4 = objFunc.imports("CUSTOMERCODE")
               set objOSGR5 = objFunc.imports("CUSTOMERNAME")
               objISGR1.value = cstr(doc)
               objISGR2.value = cstr(companycode)
               objISGR3.value = cstr(year)
               bResult = objFunc.Call          <<<<< Error
               GetDataFromSAP = Array(cstr(objOSGR1),cstr(objOSGR2),cstr(InvDateFormat(objOSGR3)),cstr(objOSGR4),cstr(objOSGR5))
               If IsLogOnSAP Then
                         objSAPFunction.Connection.Logoff
                    End If
          End If
These code can run on the A machine, but do not run on the B machine. And both two machines have been installed SAP FrontEnd.
which problem about it?

To change all definition of parameters of the function from type to like may be solution.

Problem while calling RFC function module in java

Hi all
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM GWHOST=<system.ab.ydydy.yyyd.com>, GWSERV=sapgw00, ASHOST=<system.ab.ydydy.yyyd.com>, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname '<system.ab.ydydy.yyyd.com>' unknown
TIME        Mon Jun 06 14:50:25 2005
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      ninti.c
LINE        332
DETAIL      NiPGetHostByName2: hostname '<system.ab.ydydy.yyyd.com>' not found
SYSTEM CALL gethostbyname_r
COUNTER     1
     at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:2983)
     at MyProject.Bapi2.<init>(Bapi2.java:43)
     at MyProject.Bapi2.main(Bapi2.java:231)
Pl help me
pradeep

Hi
This is my code....
Created on Jun 2, 2005
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package MyProject;
@author pradeep
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
import com.sap.mw.jco.*;
public class Bapi2 extends Object {
   JCO.Client mConnection;
   JCO.Repository mRepository;
   public Bapi2() {
       try {
          // Change the logon information to your own system/user
          mConnection =
            JCO.createClient("122", // SAP client
               "<pradeep>", // userid
               "*****", // password
               "EN", // language
               "<abc11.aa.abc23.company.com>", // application server host name
               "<00>");//system no
          mConnection.connect();
          mRepository = new JCO.Repository("HLL", mConnection);
      catch (Exception ex) {
        ex.printStackTrace();
        System.exit(1);
      JCO.Function function = null;
      JCO.Table codes = null;
        try {
           function = this.createFunction("BAPI_COMPANYCODE_GETLIST");
           if (function == null) {
             System.out.println("BAPI_COMPANYCODE_GETLIST" +
                                     " not found in SAP.");
             System.exit(1);
           mConnection.execute(function);
           JCO.Structure returnStructure =
             function.getExportParameterList().getStructure("RETURN");
           if (! (returnStructure.getString("TYPE").equals("") ||
                    returnStructure.getString("TYPE").equals("S")) ) {
             System.out.println(returnStructure.getString("MESSAGE"));
             System.exit(1);
           codes =
             function.getTableParameterList().getTable("COMPANYCODE_LIST");
           codes.setRow(2);
codes.deleteRow();
codes.deleteRow(5);
codes.appendRow();
codes.setValue("XXXX", "COMP_CODE");
codes.setValue("Does not exist", "COMP_NAME");
codes.appendRows(2);
codes.setValue("YYYY", "COMP_CODE");
codes.setValue("Does not exist either", "COMP_NAME");
codes.nextRow();
codes.setValue("ZZZZ", "COMP_CODE");
codes.setValue("Nor does this", "COMP_NAME");
for (int i = 0; i < codes.getNumRows(); i++) {
codes.setRow(i);
             System.out.println(codes.getString("COMP_CODE") + '\t' +
                                     codes.getString("COMP_NAME"));
        catch (Exception ex) {
           ex.printStackTrace();
           System.exit(1);
        try {
           codes.firstRow();
           for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
             function = this.createFunction("BAPI_COMPANYCODE_GETDETAIL");
             if (function == null) {
                System.out.println("BAPI_COMPANYCODE_GETDETAIL" +
                                        " not found in SAP.");
                System.exit(1);
             function.getImportParameterList().
                setValue(codes.getString("COMP_CODE"), "COMPANYCODEID");
             mConnection.execute(function);
             JCO.Structure returnStructure =
                function.getExportParameterList().getStructure("RETURN");
             if (! (returnStructure.getString("TYPE").equals("") ||
                      returnStructure.getString("TYPE").equals("S") ||
                      returnStructure.getString("TYPE").equals("W")) ) {
                System.out.println(returnStructure.getString("MESSAGE"));
             JCO.Structure detail =
                function.getExportParameterList().
                getStructure("COMPANYCODE_DETAIL");
             System.out.println(detail.getString("COMP_CODE") + '\t' +
                                     detail.getString("COUNTRY") + '\t' +
                                     detail.getString("CITY"));
       catch (Exception ex) {
          ex.printStackTrace();
          System.exit(1);
       mConnection.disconnect();
     public JCO.Function createFunction(String name) throws Exception {
       try {
          IFunctionTemplate ft =
            mRepository.getFunctionTemplate(name.toUpperCase());
          if (ft == null)
            return null;
          return ft.getFunction();
      catch (Exception ex) {
        throw new Exception("Problem retrieving JCO.Function object.");
   public static void main (String args[]) {
      Bapi2 app = new Bapi2();
This is the error i'm getting...
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM GWHOST=<abc11.aa.abc23.company.com>, GWSERV=sapgw00, ASHOST=<abc11.aa.abc23.company.com>, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname '<abc11.aa.abc23.company.com>' unknown
TIME        Mon Jun 06 17:15:12 2005
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      ninti.c
LINE        332
DETAIL      NiPGetHostByName2: hostname
            '<abc11.aa.abc23.company.com>' not
     at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:2983)
     at MyProject.Bapi2.<init>(Bapi2.java:45)
     at MyProject.Bapi2.main(Bapi2.java:233)
Thx
PRadeep

Problem while calling RFC in java

hi,
I writed a java program calling a batch input RFC. The RFC return an internal table which storing the system messages of the batch input process. My problem is:
When i debug the java program,the RFC excecuted and return the correct internal table to me.
But when i executed it not in debug mode, there is no batch input messages return to me.
My code is:
package com.hongta.com.z_delivery_bdc;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.JCO;
import com.sap.mw.jco.JCO.ParameterList;
@author Administrator
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class ConnectRFC extends Object {
     JCO.Client mConnection;
     JCO.Repository mRepository;
     String filePath;
     String BDCLOG;
     JCO.Function function;
     public void Connect1() {
          filePath =
               "C:
Documents and Settings
Administrator.3939200975DB4C5
desktop
cigaXY2008-12-15.xml";
          function = null;
          try {
               // Change the logon information to your own system/user
                    mConnection = JCO.createClient("610", // SAP client
          "xxxxxx", // userid
          "xxxxxx", // password
          null, // language
          "10.96.0.53", // application server host name
     "01"); // system number
      // mConnection.setAbapDebug(true);
               mConnection.connect();
               mRepository = new JCO.Repository("ARBsoft", mConnection);
          } catch (Exception ex) {
               ex.printStackTrace();
               System.out.println("jco connect failed");
                                        mConnection.disconnect();
               System.exit(1);
          //JCO.Table codes = null;
          try {
               function = this.createFunction("Z_BAPI_CONTRACT_BDC");
               if (function == null) {
                    System.out.println(
                         "Z_BAPI_contract_bdc" + " not found in SAP.");
                    if ( mConnection != null && mConnection.isAlive()) {
                         mConnection.disconnect();
                    System.exit(1);
               //function.getImportParameterList().setValue(filePath, "FILEPATH");
               //function.getImportParameterList().setValue(BDCLOG, "BDCLOG");
               mConnection.execute(function);
                               catch (Exception ex) {
                                   //System.out.println(ex.toString());
                                ex.printStackTrace();
                                 System.out.println("execute failed");
                                        mConnection.disconnect();
                                 System.exit(1);
          JCO.Table codes = null;
          codes =
             function.getTableParameterList().getTable("MESSAGE");
          try {
                    codes.firstRow();
                    for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
                    System.out.println(codes.getString("CON")" "codes.getString("MESG"));
          catch(Exception ex1){
               ex1.printStackTrace();
               System.out.println("codes");
          if ( mConnection != null && mConnection.isAlive()) {
               mConnection.disconnect();
               System.out.println("chenggong");
          public JCO.Function createFunction(String name) throws Exception {
               try {
                    IFunctionTemplate ft =
                         mRepository.getFunctionTemplate(name.toUpperCase());
                    if (ft == null){
                         return null;
                    return ft.getFunction();
               } catch (Exception ex) {
                    throw new Exception("Problem retrieving JCO.Function object.");
          public static void main(String[] args) {
               ConnectRFC app = new ConnectRFC();
               app.Connect1();
Regards,
taowenbo.

hi,
i had resolved my problem in other way.I don't upload my data using ws_upload now,but upload with table.
here is my code.Maybe helpful to somebody:
       JCO.Table C_XYORDERTable;
     JCO.Table C_XYORDPR_FINALTable;
     public void getXyordprFinalElement(Element e) {
          try {
               for (Iterator i = e.getChildren().iterator(); i.hasNext();) {
                    Element child = (Element) i.next();
                    if (child.getName().equals("ORDER_ID"))
                         C_XYORDPR_FINALTable.setValue(child.getText(), "ORDER_ID");
                    else if (child.getName().equals("ID"))
                         C_XYORDPR_FINALTable.setValue(child.getText(), "ID");
                    else if (child.getName().equals("PRODUCT_ID"))
                         C_XYORDPR_FINALTable.setValue(
                              child.getText(),
                              "PRODUCT_ID");
                    else if (child.getName().equals("MATNR"))
                         C_XYORDPR_FINALTable.setValue(child.getText(), "MATNR");
                    else if (child.getName().equals("QUANTITY"))
                         C_XYORDPR_FINALTable.setValue(child.getText(), "QUANTITY");
               C_XYORDPR_FINALTable.nextRow();
          } catch (Exception ex) {
               ex.printStackTrace();

Problem with Call transaction method in function module

Dear Frndz,
           I am converting its services into webdynpro.
           I developed a rfc[function module] for travel management [TRIP] . In that rfc i used call transaction method[BDC] to upload the data. The same rfc will be called from the frontend[portal].It is working fine in development for whome se37 execution authorization was assigned. It is not working for other users. I hope it is something relevant to authorization .If suppose can i create a authorization object for this rfc and assign it to the profile.
        Normally users can be given authorization to run the tcode.
similarly i want to give the authorization to be given users to execuste this funtion module.
huv can i do it ?? any suggestion.
Rgds.
siva

Use ST01 transaction to start authorization trace, you will then see what authorizations are missing (if your assumption is right of course, i.e. if it's really an authorization problem)

Problem in calling RFC Model

Hi everybody,
I have made one application which calls one function module from SAP R/3 system. There are three input parameters in it. For one of the parameters i need to pass values in case sensitive. In SAP R/3 i have created one data element and domain for this Input parameter in which i have specified as case sensitive which is needed in my application.
Now when i m running my function module in R/3, i have to check Upper/Lower case check box given on the top, Otherwise i can't get proper results. Upto this it is ok. But when executing this Function module from webdynpro it can't find any records because by default that case check box is unchecked. So, Can we set that checkbox as checked from webdynpro in order to execute that function module properly?
Or any alternate method to accomplish this?
Thanks in Advance,
Bhavik

Hi,
In your case the FunctionModule shoule take this as parameters .I mean FunctionModule shoule have another parameter called "Checked" which is of type boolean so that when you import the model you will get that model attribute so that you can pass the value.
Do you have permissions to change the FM ?? If so you can do the above.
Regards, VIP

Calling RFC Adapter fails - convert error

Hi,
I have a problem with calling RFC Adapter. I'm using JDBC->XI->RFC scenario. JDBC does just "select 'W' from dual". In the destination SAP system RFC function is created for test purposes. This function has one parameter - string type. After calling it, it should write a sysdate into the SAP Z_ table. The XI should call the function with the 'W' parameter. But this fails. Everything is ok, but calling the RFC returns following error (copied from the Runtime Workbench -> Message Monitoring :
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$Exception: (130) JCO_ERROR_XML_PARSER: Expecting a tag to begin with '<' instead of 'W', in "u
(Yes, this is thw whole error message. I don't know what u should be...)
Did someone get this error?
Thanx 4 answers, Peter

Hello all,
Let me reopen the topic of my colleague. I'm facing the same error though with bit different symptoms. Here it is.
ERROR msg:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$Exception: (130) JCO_ERROR_XML_PARSER: Expecting a tag to begin with '<' instead of 'Z', in "T
The XML message (MainDocument):
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_BAPI_ACCESSIBILITY_TEST_XI xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<BAPI1008 />
<PARAM>Z_XID_500_ACC</PARAM>
<ZTTOTH_BAPI1008 />
- <b><ZTTOTH_STRUCT>
<PARAM1></b>Z_XID_500_ACC</PARAM1>
</ZTTOTH_STRUCT>
</ns0:Z_BAPI_ACCESSIBILITY_TEST_XI>
According to the error message the parser expects behind string ...<ZTTOTH_STRUCT><PARAM1> another tag, but the question is why.
To make all this more funny here I paste another XML message of BAPI calling which works fine (without the error described above):
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_BAPI_PARAMETERS_TEST_XI xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<PARAM>Z_XID_500</PARAM>
- <ZTTOTH_STRUCT>
<PARAM1>Z_XID_500</PARAM1>
</ZTTOTH_STRUCT>
</ns0:Z_BAPI_PARAMETERS_TEST_XI>
The BAPI functions are absolutely the same except those other two import-pramater structures (BAPI1008 and ZTTOTH_BAPI1008). I'm gonna to try to add those import-parameter structures into Z_BAPI_PARAMETERS_TEST_XI, but anyway - this is weird.
Does anybody have an idea, what should be wrong ?
Thx. Tom
Message was edited by: Tomas Toth

Problem with calling a report from a function module. Please help! URGENT!

Hi Experts,
   I have a scenarion like this:
XI -
> Function Module -
> ABAP Report
From XI I am callingf a function module in another R/3 system. This function module inturn calls a ABAP report using SUBMIT statement. The function module and the report reside in the same R/3 system.
I am calling the report like this:
SUBMIT yseg_save_bp_data WITH SELECTION-TABLE rspar
                             AND RETURN.
The problem is when I run the function module directly in the R/3 system then it calls the report without any problem.
On the other hand, when I call the function module from XI then the report is not called. On debug mode I found that the program exits just at the Submit statement. Why is this strange problem?
What mistake am I doing? Is there any limitations or restrictions with SUBMIT statement.
What is the correct way of using submit statement in this scenario?
Kindly help me!
Thanks
Gopal

Hi Rao,
   I have created the FM as remote RFC. Infact XI is able to call the FM. Only problem is when it reaches the point where the report is called via SUBMIT it exits.
Help me please!
Thanks
Gopal

Character conversion problems when calling FM via RFC from Unicode ECC 6.0?

Hi all,
I faced a Cyrillic character convertion problem while calling an RFC function from R/3 ECC 6.0 (initialized as Unicode system - c.p. 4103). My target system is R/3 4.6C with default c.p. 1500.
The parameter I used in my FM interface in target system is of type CHAR10 (single-byte, obviously).
I have defined rfc-connection (SM59) as an ABAP connection and further client/logon language/user/password are supplied.
The problem I faced is, that Cyrillic symbols are transferred as '#' in the target system ('#' is set as default symbol in RFC-destination definition in case character convertion error is met).
Checking convertions between c.p. 4103 and target c.p. 1500 in my source system using tools of transaction i18n shows no errors - means conversion passed O.K. It seems default character conversion executed by source system whithin the scope of RFC-destination definition is doing something wrong.
Further, I played with MDMP & Unicode settings whithin the RFC-destination definition with no successful result - perhaps due to lack of documentation for how to set and manage these parameters.
The question is: have someone any experience with any conversion between Unicode and non-Unicide systems via RFC-call (non-English target obligatory !!!), or can anyone share valuable information regarding this issue - what should be managed in the RFC-destination in order to get character conversion working? Is it acceptable to use any character parameter in the target function module interface at all?
Many thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP ABAP Consultant

hey,
I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

RFC call having problem while calling from webdynpro

Hi ,
I am facing a strange problem .In my webdynpro i have a RFC function module . the structure is like this.
Loop.
<GET current system>.
TRY.
call <RFC FUNCTION MODULE> DESTInation <own system> .
ENDTRY.
ENDLoop
With in the Function module we have created a BDC seesion.
Here the loop is running for 10 times .for the first time it is the rfc call is perfect and a session is created in sm35.
For the second loop run the system is going to hang.and when i checked sm35 the next day 1 session is created (for the second loop)
Like this the session are created in different days .And the session created times are like00:00:04,00:00:08 etc.
I have checked if any hold time is there for the session but there is noting like this .
And i digged more and checked in SM50 there the call is running in background and it is connected some other system though i have given the target system as own system.
please advice me about this and how to find the root cause for this.
thanks

Thanks for your reponse .
Here the problem is it has already been developed now the Bug is the function call is still running and the sessions created as
below
17.06.2010     00:00:30     SAPMSSY1
17.06.2010     00:00:28     SAPMSSY1
16.06.2010     00:00:36     SAPMSSY1
15.06.2010     01:21:46     SAPMSSY1
15.06.2010     00:59:33     SAPMSSY1
15.06.2010     00:01:06     SAPMSSY1
Now teh problem is why the sessions are not created at the same time i executed it.ie,on 11:06:2010.
so,please let me know why is call is taking that much long time .(it is very rare for RFC call for such a long time ).

Call RFC Function Module and return 1000 records at a time

I would like to call a Remote Enabled Function Module from a non SAP system. This function module will select data from the database and return it to the calling program.
Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records. Therefore the calling program would call the FM 100 times.
How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records?
Let me know if additional information is needed.
Thanks,
Aaron

Hello,
Here is how you can go for this issue:
1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
     Import: Package Size
     Export: Total number of records
     Changing: chunk count
Implement following logic:
1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one
    time activity so you better maintain one flag import parameter will be set to 'X' only first call.
2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
    counter value sent from calling program.
4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
    chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
    with first chunk.
5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
    chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk
    counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
6. Repeat step 4 until you reach last chunk.
You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
Hope this helps.
Thanks,
Augustin.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Standard Component in CRM that will call RFC Function Module

HI all,
Is there any Standard Component in CRM that will call RFC Function Module from ECC and that called RFC FM should Fetch the data from ECC.

You can call RFC from different places, like programs, function modules, web dynpros, classes...
So you just have to have appropriate RFC on ERP side and call it from CRM side. To call it you use the following statement...
      CALL FUNCTION 'YOUR RFC FUNCTION'
        DESTINATION i_dest "name of server
        EXPORTING
          your export parameters
        IMPORTING
          your import parameters
Regards.

Problem with call of function F4UT_RESULTS_MAP in search help exit

Hi everybody,
i have a problem concerning call of function F4UT_RESULTS_MAP.
I call this function in this way:
CALL FUNCTION 'F4UT_RESULTS_MAP'
       TABLES
            shlp_tab          = p_shlp_tab
            record_tab        = p_record_tab
            source_tab        = lt_zv055[]
       CHANGING
            shlp              = p_shlp
            callcontrol       = p_callcontrol
       EXCEPTIONS
            illegal_structure = 1
            OTHERS            = 2.
in lt_zv055[] there are results from previous select, but i want to select only values,
that match select options that are specified in p_shlp.
But it always shows all the values that are in lt_zv055.
What am i doing wrong?
Thanks in advance.

Read the "Notes" part in FM documentation and you will find the reason .

Problem when calling more than 1 Javascript function

Hello everybody,
I am trying to disable fields based on the value in a Select List. There is a table in which values are stored to tell if a field should be disabled for the selected value. I have created an Application Process and a JavaScript function for each field.
The problem is that only the first function is executed, and the second not.
I have tried the following:
onchange="Disable_Dagen(this);Disable_Kg(pThis);"and I have put them together in a parent JavaScript function
function Disable_Fields(pThis){
Disable_Kg(pThis);
Disable_Dagen(pThis);
}In either case only the first works, so when I change the order then the other one is executed properly.
Can anyone give me a clue on how to solve this?
My complete JavaScript definition in the header is as follows:
(the code in html_DisableOnValue is taken from the example site from Carl Beckstrom)
<script language="JavaScript" type="text/javascript">

</script>
In this case the Form Element property is set toonchange="Disable_Fields(this)"
Thanks, Wouter

Hi Roel,
Thanks again for your response.
There is a lot more to Firebug then I had seen before. Now I have turned on the Console and the Script. Initially I saw the following in the Console:
C is undefined
$x_disableItem(undefined, true)apex_3_1.js (regel 1)
html_DisableOnValue(select#P43_AFWIJKING_CODE, "101", "P43_AANTAL_DAGEN")f?p=104:...2606::::: (regel 38)
Disable_Dagen(select#P43_AFWIJKING_CODE)f?p=104:...2606::::: (regel 51)
onchange(change )f?p=104:...FPQ%3D%3D (regel 2)
[Break on this error] var gDebug=true;var gkeyPressTime;var gL...Options;html_SelectValue=$f_SelectValue;When I removed the comments before the 2 Alerts, I only got one alert when I tested it.
Then I replaced the function call to html_DisableOnValue to $f_DisableOnValue as you suggested, and that did the trick. Now it Works!
I still don't know why the html_DisableOnValue function doesn't work. I just copied it from the demo site of Carl Beckstrom. Anyway my problem is solved.
Have a nice weekend, Wouter

Problem in calling RFC of an Function modue

Similar Messages

Maybe you are looking for