Problem in Client Proxy

Hi All,
By using client proxy i am moving material master data into a file, i have finished IR part and activated it after that i went to R/3 side and generated the proxy and activated it . after that i have written a program in abap editor to fetch data for matnr,mart,mbrsh and meins and passed to exporting parameter output in method asynchroneous_execute method. and in XI side i have created receiver determination, interface determination and receiver agreement and activated. And finally i have excetued my program in R/3 . i didn't get the file into my destination and i didn't find any message in sxmb_moni. can any body suggest me where can i look at the status of message and list some possible errors.
Thanks in advance .
Regards,
Prem.S

Hi All,
When i execute sxmb_moni in R/3 system , i am getting the below mentioned error. Kindly porive me some solutions for this.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 404 &nbsp Not Found</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> The requested resource does not exist.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b> Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre> Go to <A HREF="/" target="_parent">main page</A> of this application!</pre></font></td> </tr> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 404 with the description Not Found Error when sending by HTTP (error code: 404, error text: Not Found)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
List some possibilities for getting this error.
Regards,
Prem.S

Similar Messages

Facing Problem in Client Proxy

Hi All,
I am trying to move the material data into a file using proxies. i have activated proxies and written a program in abap when i execute the abap report and when i look it in sxmb_moni i am getting the follwoing error :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">NO_EXEC_PERMISSION</SAP:Code>
<SAP:P1>User/Party/Service</SAP:P1>
<SAP:P2>PIAPPLUSER//Dell_Bs_Ib</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No authorization available for processing messages on Integration Server (ACL at sender service): User/Party/Service PIAPPLUSER//Dell_Bs_Ib</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly provide the solution.
Prem.S

Hi,
It seems to be authorization issue. PIAFUSER must be assigned the SAP_XI_APPL_SERV_USER role. Please go through the following Link for more information.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm.
Thanks& Regards,
aravinth

Problem in ABAP Client Proxy

Hai All,
I am working on ABAP Client Proxy to RFC.
Here i generated the proxies and wen i execute it i am able to see in sxmb_moni but its showing in Green color which is still in process.but i was unable to find the the receiver business system and receiver interface.
I hope some HTTP connection problem.
Can anyone explain me in detail how to create the http connection as i confused here.
Lets say XI(sender) to R3(Receievr)
where proxy is been created in XI system itself and also generated in XI system only.
Can anyone suggets me here as this interface is totally asynchronous.
Thanks,
Kalyan.

Hai Seshagiri,
Thanks a lot.
Am giving you points buddy.Its working.
Cud u plz give me ur Email id.
This is fine but i want implement this interface to further there i am getting errors.So that i can send u the screenshots of those.
Thanks,
Kalyan.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from using email correspondence as the main objective of the Forums is to share knowledge.
SDN PI/XI Forum Moderator

ABAP client proxy wildcard/unicode problem

Hello,
i have an abap client proxy. The target system is a non sap system. For one input field of the request, a wildcard search is possible (with sign %, field type = string).
If i exceute the proxywith the wildcard sign '%' i get following error message:
SOAP:1.001 CX_SXML_PARSE_ERROR...Error in conversion from UTF-8 to type C or
type CSTRING: 48696C6673736368FC747A65 is not a
valid UTF-8
If i call the target system directly (for examle with jmeter), i get a response even with wildcard sign '%'.
It seems that there is a generell conversion problem at the sap client proxy. Do you have any ideas?
Is the problem maybe the transformation of the request, or the calling of the target system?
Thanks a lot!

any idea?

ABAP Web Service client proxy - generation problems

Hi!
I tried to create an ABAP web service client proxy for many different web services -
for instance some of that listed at <a href="http://www.xmethods.net/">http://www.xmethods.net/</a> .
Almost on 99% of the WSDLs the client proxy generation failed.
For istance "<extension> not supported", or "<message...> must have at least one part",... .
Could anybody tell me what restrictions are to web services you can create a
ABAP client proxy for ?
In the SAP Web AS Java Stack there is no problem at all to generate a
client proxy for almost all of the xmethod-WebServices !
Is the ABAP Web Service proxy generation for production use ?
Regards
Frank Ruggaber

Resolved through SAP Help. Refer SAP note# 0001403271.

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

Client Proxy Naming convention problem

Hi
I have created client proxy for the outbound interface for the scenario sap-xi-file...due to some naming convention problem i have to delete and create new all repository objects except message interfaces... so when i try to re-create the client proxy ..i am getting the "Naming conflicts" says the interface objects already exists.. can any one tell me how to remove my previous objects and create the new
guru

Hi,
check out this link on how to regenerate proxy objects:
(after the interface was changed)
http://help.sap.com/saphelp_nw04/helpdata/en/d4/255c3cf311070ae10000000a114084/frameset.htm
Regards,
michal

Client proxy generation problem

Hi All,
I'm trying to create client proxy using given WSDL link in SE80 under enterprise services.
When I enter URL as given WSDL link it is asking for user and password.
When I enter required details (domain name/username) and password, I'm getting an error saying problem with XML generation.
When I access this WSDL link from IE with same user and password I'm able to access this service.
Could some one help me on this issue.
Thanks
Raghavendra

Hi Raja,
I do have similar problem. But If I save the WSDL in local file will it meet my requirement or not I'm not sure about this.
I'm trying to invoke the external web service by creating client proxy in SE80.
which is deployed on some machine. This service will in turn create user account in windows active directory with the details from SAP.
Now when SAP is invoking this service it will ask user and password.
But if I save this in local file will this service will work or not I'm not sure.
Is there anyway if I enter user and password then it will process further.
Let me know your inputs on this.
Regards
Vikram

Problems creating a client proxy for a WS

I've tried creating a client proxy from a wsdl but I've had no luck getting it to work.
First of all I created the client proxy in se80 with instructions from a teched lecture. The proxy seems to be generated as intended. When I create the default logical port for the proxy in lpconfig, it doesn't get any URL at all by default in the Call Parameters tab. Atleast in the teched demo the logical port got the default URL straight away.
Therefore I opened the wsdl file with notepad and put the address that was specified in the soap:address element as the location attribute. After saving and activating both the logical port and the client proxy I tried testing the proxy. All the methods give the same following error message:
Sap Fault Code 1:
Found 0 operation definitions using keys...
The WS works fine from the WS Navigator test page though. If I change the logical port URL I get an "Unsupported xstream found" error message. Thus I assume the URL that I took from the wsdl should be correct. Can I assume the wsdl is somehow broken? As I look closer at the wsdl, it seems to consist of several wsdl's that are imported to the main wsdl.

Hi Evan,
I don't think the wsdl is broken. I assume your webservice is deployed on WAS. Typically the SAP wsdl consist of 3 files, main wsdl file and 2 other files for binding and porttypes.
When all three files are appropriately available then only the proxy gets generated.
Since in your case the proxy is generated and you could activate it, means there is no problem in the wsdl.
Are there any further details in your error?
Does your service methods require any input and you are providing the input appropriately?
Regards,
Vandana.

Problem Calling a Client Proxy from ABAP which is based on an extension

I'm trying to create an Asset in Salesforce from SAP using ABAP.
I have exported the enterprise WSDL from Salesforce, generated a client proxy and have coded the login call and passed the session id to the create call.
The problem I am having is the create method references sobject however asset is an extension of this.
            <complexType name="Asset">
                <complexContent>
                    <extension base="ens:sObject">
                        <sequence>
                        <element name="Account" nillable="true" minOccurs="0" type="ens:Account"/>
                        <element name="AccountId" nillable="true" minOccurs="0" type="tns:ID"/>
                        <-- many more fields here -->
                        </sequence>
                    </extension>
                </complexContent>
            </complexType>
I need to pass something like this (tested and working using SOAPUI)
         <urn:sObjects xsi:type="urn:Asset"
                   xmlns:ns3="urn:sobject.enterprise.soap.sforce.com">
               <urn:AccountId>001A000000HoyKZ</urn:AccountId>
               <urn:Name>JWSOAPTEST Asset3</urn:Name>
                        <-- many more fields here -->
        </urn:sObjects>
I tried modifying the WSDL so sobject referrs to Asset
            
            <element name="create">
                <complexType>
                    <sequence>
                        
                       <element name="sObjects" type="ens:Asset" minOccurs="0" maxOccurs="unbounded"/>
                    </sequence>
                </complexType>
            </element>
            <element name="createResponse">
                <complexType>
                    <sequence>
                        <element name="result" type="tns:SaveResult" minOccurs="0" maxOccurs="unbounded"/>
                    </sequence>
                </complexType>
            </element>
However other types it referred to weren't populated.
The other approache may be to manually populate the xml similar to what I had to do in the header (this link gives a good overview on this Consume web service in ABAP proxy with SOAP header )
Any recommendations or advice would be appreciated.
Ideally some sample code if someone has done this or a recommendation on how to modify the WSDL.
Regards,
John

Hi John,
Calling SFDC.com from PI, is detailed out here. probably will give some tips:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50a76cfa-4966-2d10-aba7-da496d9b5bcf
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f8d03-9282-2d10-52b4-f9446e077099
Regards, Moorthy

Problem Developing Abap program to use Enterprise Service Client Proxy

Hi I am new to using Webservices but I have successfully created a Client Proxy to consume a web service. In the Abap Development Workbench and have created a Logical Port for it. The proxy works fine when I test it using F8.
However I do not seem to be calling it correctly from my program. When I run the program in debug no exception is generated but the return structure is empty.
The method call does not require any data in the input structure.
The code is as follows :
REPORT zweb_test_wsclient.
DATA: object_ref TYPE REF TO zwebco_bcepsoap,
      input TYPE   zwebget_bceplist_soap_in,
      output TYPE   zwebget_bceplist_soap_out,
      exception TYPE REF TO cx_ai_system_fault.
START-OF-SELECTION.
TRY.
      CREATE OBJECT object_ref.
          EXPORTING LOGICAL_PORT_NAME = 'LP1'.
    CATCH cx_ai_system_fault INTO exception.
ENDTRY.
TRY.
      CALL METHOD object_ref->get_bceplist
        EXPORTING
          input = input
        IMPORTING
          output = output.
    CATCH cx_ai_system_fault INTO exception.
ENDTRY.
END-OF-SELECTION.
Can tell me what I am missing or what steps I can take to identify the problem ?
thanks

Hello Peter,
I have the same problem as You. Do you remember the solution?
A lot of thanks,
jordi

Error at creating Client Proxy of external webservice (WSDL)

Hi Experts,
I try to create a Client Proxy Object out of an external webservice. Here is the WSDL URL:
[http://www.webservicex.net/CurrencyConvertor.asmx?wsdl]
I try to create it with this URL and then I get the error message
Not implemented
Exception of class CX_SIDL_INTERNAL_ERROR
I found two other threads with a similar problem:
cunsuming external webservice in ABAP
Problem while consuming external webservice
But there is no solution that worked for me. In the first thread it is mentioned, that the code between
<wsdl:binding name="XXXXHttpGet" type="tns:XXXHttpGet">
and it's closing brackets should be removed in a local file. I tried that and was able to create a client proxy object out of this local wsdl-file. But then I called the webservice with the folling coding for testing:
report z_currency_converter.
data: convert type ref to zzzco_currency_convertor_soap.
try.
    create object convert
exporting
    logical_port_name = 'Z_LP'
catch cx_ai_system_fault .
endtry.
   data: output type zzzconversion_rate_soap_out .
   data: input type zzzconversion_rate_soap_in .
   input-from_currency = 'EUR'.
   input-to_currency = 'USD'.
try.
call method convert->conversion_rate
exporting
    input = input
importing
    output = output
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
write output-conversion_rate_result.
The same code worked fine in another system. In this "older" system could also create a client proxy, I think because it has a newer Support Pack version.
SAP says the following:
The problem is that this WSDL uses two bindings different from SOAP
binding which is not in conformance with Basic Profile 1.1 -
http://www.ws-i.org/Profiles/BasicProfile-1.1.html#WSDLBINDINGS .
I looked in the document, but I do not know where the problem in the WSDL file exactly is. What have I to change? Or can somebody give me the URL of a free webservice, that you used for creating a client proxy with a new support pack standing? In the "old" system there is not yet the SOAMANAGER but in the one where it doesn't work.
I hope you have an idea.
Thanks a lot in advance!
Best Regards,
Ingmar

I think it is the problem of version.U need to ask SAP to release some patch levels to correct it.
Regards
Snehasish

Error while creating a client proxy for CBR.RU

Hi!
I need to consume web service. Here is the link: http://www.cbr.ru/DailyInfoWebServ/DailyInfo.asmx?WSDL
I tried to make an own client proxy with SE80 transaction. (edit object->enterprise services -> client proxy -> create) After completing wizard an error occurs with text:
Incorrect value: Unknown Namespace http://www.w3.org/2001/XMLSchema
The same schema works perfecrly with this web service:
http://www.deeptraining.com/webservices/wsStrings.asmx?WSDL
In this case proxy class is created with no errors and everything is fine.
Could anybody let me know what's the reason of such bug, please? I'm not competent with XML schemas so it's kind of difficult to understand what's wrong with WSDL file from CBR.RU

Late response I know, but I have solved a similar problem recently and thought I would share.
Firstly, the problem is not with the namespace. The "Namespace ..." part is just stating the namespace the "Incorrect Value" has. So this error is complaining about the value "Unknown" - which isn't very helpful.
It appears the SAP SE80 importer does not like elements like the following because it can't understand <s:element ref="s:schema" />. It appears this is a common thing to be included in .NET generated WSDLs.
<s:element minOccurs="0" maxOccurs="1" name="GetCursDynamicResult">      <s:complexType>          <s:sequence>               <s:element ref="s:schema" />               <s:any />          </s:sequence>     </s:complexType></s:element>
SAP will also not like this example as it does not support mixed content (see: http://www.w3schools.com/schema/schema_complex_mixed.asp)
<s:element minOccurs="0" maxOccurs="1" name="SaldoXMLResult">
     <s:complexType mixed="true">
          <s:sequence>
               <s:any />
          </s:sequence>
     </s:complexType>
</s:element>
You can "Fix" the problem in both cases by removing the offending text in a local copy of the WSDL file so remove line 4 in the first example and change line 2 in the second to <s:complexType> the proxy can then be generated. No idea if the resulting service will be fully operational though!

Error while deploying Java Client Proxy

Hi Experts,
I developed a java client proxy.Since i do not have access to visual administrator, i uploaded the ear file to a folder in the XI box and asked the basis folks to deploy it.
On trying to deploy it on to the server they got the following error.
Details:
========
1) Error loading archive
    /usr/sap/XS1/put/R3Ear.ear
    (server side name is: /usr/sap/XS1/put/R3Ear.ear)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: Error during attribute reading: received exception: invalid stored block lengths
What could be the reason for the error?

Hi
recreate your ear file and try to redeploy it.
it could be a zipping problem
Regards
Vishnu

ABAP Client Proxy from ECC 6.0 to XI message irregular recieving

Hi Gurus
Any one has come across issue whereby the ECC 6 system trigger ABAP Client proxy to SAP PI 7.0. The first time the PI is able to recieve it in the SXI_MONITOR. But subsequent trigger from the ECC 6.0 system the SAP ABAP program to trigger the Client Proxy, the PI seem to lost connectivity and did not recieve any message. This is pretty strange and hopefully someone in SDN and enlighten me.
Thanks
Regards
On behalf of malcolm

Hi Santosh
I went to SMQR and register the queue, but it still did not reflect the locked queue when i trigger the ECC 6 to SAP PI 7.0. The green flag - schedule still appear in the SXMB_MONI queue. But i am quite puzzle as why the ABAP client proxy after sending message the first time and second time, the third time it stuck? And also it is not practical to everytime go to the SMQ1 or SMQ2 to unlock the queue. I don't think it a good solution for solving my problem, it is just a temporary solution.

Problem in Client Proxy

Similar Messages

Maybe you are looking for