Problem in constant selection
Dear Experts,
Continue with my previous thread, I have marked constant deletion option in purchase org and i am gettign values in single column. but
i have 2 RKF or CKF at infoprovider level
1. purchase value
2. purchase qty
3. rate = purchase value/purchase qty
I am restricted rate with variable and displaying for lastyear month, year to month, lastyear t olast month...
My constant selection option is working with lastyear month and value coming against purchase org..
but for YTM and LYTLM value is coming aginst purchaseorg # ...i mean constant selection property is not working with these KF...
same way m displaying purchase qty for ytm and LYTLM in this constant selection is working...
m using same variable for purchase qty and purchase rate but still its working with qty but not with rate..
What can be the reason .. pls advise
Regards
Shweta
not resolved
Similar Messages
-
Problem with constant selection of keyfigure ar reporting level
I have created a multiprovider on top of a DSO and a Cube ,there is one characteristic which is not common in the DSO and Cube ,while i make constant selection on a partcular key figure at reporting level, that uncommon characterisitic data is displayed as not assigned.
Please help me in this regard.
Thanks in advance
Vikas AryaHi,Vikas Araya,
Try to use filter on that characteristic which is not common in the DSO and Cube.
because constant selection on key fig allows u r key fig value to become independent of all filter values.
Hope it may help u....
regards
kalyan -
Constant selection and authorizations
Hi,
I've made a query for displaying some selected figures for our company's health and safety managers.
The query is displayed with 0DF_FORCE in the rows as a hierachy and in addition to needing a role for displaying the query at all, the users are restricted to "their" part of the hierarchy using an exit variable with lookup in a nav-attribute to 0DF_FORCE. This all works fine, the problem is that I want to use the number of workdays in a given month for sickleave % calculations. I tried making a formula variable exit for this that will return the number of workdays in an variable intervall given at query start. This works, but I'm then not able to drill the query to spesific months, since the formula variable does not respond to calmonth.
Alternativly I tried putting the number of workdays into a DSO and linking to calmonth there. That solves the navigation, but now I have a problem with constant selection. I need the number of workdays for every force element in 0DF_FORCE. Since the DSO does not contain this characteristic, it needs constant selection '#' on 0DF_FORCE within the restricted keyfigure for workdays. And here's the catch, the intended users do not have and cannot have authorization for force element '#'.
I would appriciate any leads on developing my current logic, or a new tack for displaying number of workdays pr month without conflicting with said authorization limitations.SAP haveth in their glory created 0numwday as an attribute to 0calmonth as of jan '08. That they haven't documented it at all, did that it took some time to discover, but that's bygones. What it means is that I can make a replacement path variable on 0calmonth instead of my keyfigure and avoid the whole issue. Hurrah!
-
Problem with 0FIGL_VC1 when use constant selection in the query
Please kindly help me. I have this problem for 2 weeks already.
When I create a query from virtual cube 0FIGL_VC1 (balance sheets / p&l statements), if I use constant selection in any of key figure, my report could not display financial statment correctly.
My report layout
Columns : key figures (including 0FIGL_VC1_CK001)
Rows: 0GLACCEXT (financial statement item) << as hierarchy
Initially, the query is processed correctly.
However, based on the requirement from my customer, I really have to use "constant selection" for some of my columns. Whenever I do so, the query display incorrectly. (Some nodes of financial statement item just disappear. (it seem like all contra item will disappear.)
Please help!If I dont use constant selection in the query, data are display correctly.
But If I use constant selection in the query, some financial statement item dont display any value
Example :
Financial statement item(Display in hier) Period1 Total Period1(Constant selection)
A 10 60
B 20 60
C 30 60
D 0 60
- Financial statement item "D" has some value.
- Financial statement item "D" is in the hierarchy,one gl account has been assigned to more than one group differentiated by debit/credit indicator.
Please help!! -
Hi, all.
In our project we faced with problem. We have global filter on query (like Char = 1), in query we use key figure what have restriction like Char = # and we select Constant Selection option on this restriction. But when we start query in Analyzer we don't get any data. Maybe I don't good understand concept of constant selection or maybe it is any bag. Can anybody explain what I can do with this problem.
Regards, Fanil.Hi, AL.
I have BEx Query on Multiprovider. In this query I have global filters like as
INVERSION = INVERSION_I_E - Manual Input Variable(User Cannot input # value)
Also I have one Restricted Key Figures that restricte like
1st KF from Infocube 1
INVERSION = INVERSION_I_E
2nd KF from Infocube 2
INVERSION = # (Empty).
In second KF I select option "Constant Selection" and expected that they show any data, but it doesn't show anything. -
Problem in displaying selected page items in the title in Graph
Hi There;
I have a problem in displaying selected value of named page item in the graphs.
Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet title and value of selected page item "Location" in my example.
But when I use the same (&WorksheetName &Location) in the title of graph or Axis of the graph, it would show up only the name of the worksheet but not the value of page item "Location", instead it would print "&Location"
Any idea why it is not able to reference the select page item in Discoverer graph? I am using Oracle BI Discoverer 10.1.2.1.
Thanks in Advance,
Regards,
Nidhi JethooHi Michael;
Thanks a lot. It might not have been considered necessary but you do require, e.g in my case I am plotting Average value of a Parameter and it does make sense in including the name/value of Parameter(surface water temp/bottom watter temp) as an Axis instead of just a constant Parameter or say Average Parameter. So that user can plot the variation of different parameters by changing the page items and when user changes the value of parameter and export the graph he/she has the parameter name(actual value) in the graph.
But I can include all the parameters (&Parameters) or all the page items(using &PageItems) in graph then why not individual page-item and individual parameter.
I would log a SR and see what they say.
Thanks again,
Nidhi -
Constant selection and Reusability
Hi Gurus,
In BI 7.0,I am facing following problem.
1.I am using characteristic say ZSITE as constant selection and we use the data in a particular report.
In Other report we are using ZSITE and expected to see different data but we are getting constant selection data.
Is there any way that characteristics can be used differently in different reports?If so can anybody give me some idea please.Hi Nrupal
you are talking abt constant selection in transformation/UR/TR or in Bex. If it is hard coded constant in Back-end then the same value will be used in all query as it is attribute.
if you are putting constant selection in query then i guess it shouldn't be a problem because you define the constant selection in KF property locally in query designer.
Thanks
Tripple k -
Constant Selection in BEx Query Designer on BI7
Hi guys
According to this blog <a href="/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection Selection</a>, we can create constant selection on both Characteristics and Key figures. I understand how to do it with restricted key figures.
Can anyone give me a step by step guide on how to create constant selection for a Characteristic in BEx Query Designer on BI7. I can't find options for 'constant selection'
Or is this the same thing when you include or exclude values?
Message was edited by:
jimi ogunThanks Krishna
I am actually using a Multiprovider for my queries but business requirements mean I need to create joins.
I am trying to avoid Infosets and I believe another way is to use the Constant Selection feature in Query Designer.
Going back to my previous posting, I know how this is done with a restricted KF but I don't know how when it comes to characteristics.
Can anyone help? -
Problem in multiple selections in a jList
I have two jLists. Now I have to select some items from one jlist and have to transfer in the other one. But while trying to do it in the runtime I am getting some unexpected runtime errors including "Exception occurred during event dispatching". When I try to transfer only one item it works fine but shows problem in multiple selections. Pleast give your suggestions.
[_First suggestion_|http://catb.org/~esr/faqs/smart-questions.html]
[_Second suggestion_|http://mindprod.com/jgloss/sscce.html]
db -
Problem in AT selection screen validation
Hi,
I am having problem in AT SELECTION SCREEN Validation.
I have 2 radiobutton and 6 parameter. if i click first radio button all the 6 radiobutton should enable and take the user input, that is working fine for me.
if i click second radiobutton , out of 6 , 3 parameter should disable and remaining 3 should enable. thats also working fine.
My problem is program has written the validation for this 3 parameter in the AT SELECTION SCREEN.
For first radioutton all the validation working fine, for second validation as soon as i press the radiobutton it will display error message. Based on 2 parameter user is filling value for 3 rd parameter.
I want the same validation to be done for second radio button after user pressing enter.
PARAMETER: p_single RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND f1,
p_multi RADIOBUTTON GROUP rad1.
PARAMETERS: s_pwwrk LIKE plaf-pwwrk.
PARAMETERS: p_lgort LIKE plaf-lgort.
PARAMETERS: p_kostl LIKE cobl-kostl.
here is my code:
AT SELECTION SCREEN.
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat0(4) NE marv-lfgja OR p_budat4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat0(4) NE marv-vmgja OR p_budat4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.For your Case ,
If i understand clearly,You can do the validation when you want on AT SELECTION SCREEN ON WP_FIELD.
If you say your validation to be done only for Selection of Second Radio Button, then..
AT SELECTION SCREEN.
if p_multi eq 'X'. "<- Make Validation to be done only if user select Second Button
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat+0(4) NE marv-lfgja OR p_budat+4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat+0(4) NE marv-vmgja OR p_budat+4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.
endif. -
Hi Experts,
I need a clarification in my Select query.
Have created a custom search help and my requirement is I have Request ID, Last and First Name as my search parameters. I need to fetch the values from my Ztable on search with the above said search parameters, where its workflow status = 30.
* Get Request ID
lv_pattern = <ls_query_params>-request_id.
IF lv_pattern CA '*'.
REPLACE ALL OCCURRENCES OF '*' IN lv_pattern WITH '%'.
ENDIF. " IF lv_pattern CA '*'
IF lv_pattern IS INITIAL.
lv_pattern = '%'.
ENDIF. " IF lv_pattern IS INITIAL
** Get NACHN - Lastname
lv_last_name = <ls_query_params>-nachn.
IF lv_last_name CA '*'.
REPLACE ALL OCCURRENCES OF '*' IN lv_last_name WITH '%'.
ENDIF. " IF lv_pattern CA '*'
IF lv_last_name IS INITIAL.
lv_last_name = '%'.
ENDIF. " IF lv_pattern IS INITIAL
** Get VORNA - First Name
lv_first_name = <ls_query_params>-vorna.
IF lv_first_name CA '*'.
REPLACE ALL OCCURRENCES OF '*' IN lv_first_name WITH '%'.
ENDIF. " IF lv_pattern CA '*'
IF lv_first_name IS INITIAL.
lv_first_name = '%'.
ENDIF. " IF lv_pattern IS INITIAL
*Selecting the RequestID/Last and First Name values with workflow status as 30.
SELECT zzreq_id " Internal number for appropriation request
nachn
vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( ( zzreq_id LIKE lv_pattern ) and
( nachn like lv_last_name ) or
( vorna LIKE lv_first_name ) )
AND zzstatus = lv_workflow_status.
My problem is, ofcourse this query is selecting all the records where status = 30 and even it works correctly, If I searches with Request ID(* or *3*).
But am not able to select the records, if I searches with Last or First Name. Guess I did some thing wrong in select query.
Please advice me.
With Regards,
Ram.Re: Problem in my Select query
Krishna kumar Jun 9, 2014 7:52 AM (in response to Ramakrishnan Murugan)
Hi Ramakrishnan,
Can you just try the below Select Query,
SELECT zzreq_id
nachn
vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( zzreq_id LIKE lv_pattern and
nachn LIKE lv_last_name and
vorna LIKE lv_first_name ) and
zzstatus = lv_workflow_status.
Cheers,
Krishnakumar B.
I think the above suggested query is same as your solution. -
Problem in standard select query in fagll03
Good Morning frndz,
I m facing a problem while runnin fagll03. when executed it gives timeout error.
When I debug it , it gets stuck in a select query
SELECT SINGLE * FROM t800m INTO CORRESPONDING FIELDS OF ls_b
WHERE totable = ls_t800a-ntable
AND fromtable = 'ACCIT_GLX'
AND tofield = id_glflex_fieldname
AND seqnr = space.
The content in variable ls_t800a-ntable was FAGLFLEXA and in id_glflex_fieldname was USNAM.
When I cheked in table t800m, the entry could not be found. But in the report instead of setting
sy-subrc = 0 , it is stuck in the select query itself....kindly suggest y it is happening so
Regards,
VincyRe: Problem in my Select query
Krishna kumar Jun 9, 2014 7:52 AM (in response to Ramakrishnan Murugan)
Hi Ramakrishnan,
Can you just try the below Select Query,
SELECT zzreq_id
nachn
vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( zzreq_id LIKE lv_pattern and
nachn LIKE lv_last_name and
vorna LIKE lv_first_name ) and
zzstatus = lv_workflow_status.
Cheers,
Krishnakumar B.
I think the above suggested query is same as your solution. -
Problem in passing selection screen values using CALL TRANSACTION.
Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
wa_bdcdata TYPE bdcdata,
opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
HarshHi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
wa_bdcdata TYPE bdcdata,
opt TYPE ctu_params,
gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey -
Constant Selection on MultiProvider is not working properly
Hi All,
We have a MP based on 2 DSOs, say DSO1 & DSO2.
DSO1: Char 1, Char 2, Char 3 and KF1
DSO2: Char 1, Char 2, Char 4 and KF2.
Now, I am creating a query by using constant selection. I have kept all chars in Rows pane and 2 KF in Columns pane. I have restricted KF1 with char 4 and KF2 with char 3 by putting constant selection accordinlgy... However, still I am getting 2 rows of display as below...
char1 char 2 cahr 3 char 4 kf1 kf2
A B C # 10 -----
A B # D ---- 10
Could any one pls suggest how to display in single record... Your help is highly appreciable.
Best Regards
Venkat...Thank you Anshu for your suggestion.
Here, I wrongly mentioned the KF details. Both the KFs are existed in both DSO1 & DSO2. The only thing is DSO1 data is coming from ECC(R/3) and DSO2 data is coming from CRM. Now, I want to show the all chars w.r.t infoprovider wise KF vaues in a single row. Shall we achieve it by constant selection approach? Could you suggest any work around please...
Best Regards
Venkat... -
Constant selection in query designer
hi guys
please explain abut
constant selection in query designer 7.oHi,
For ex if you had designed a MP using the IC's and DSO's in which if all the fields are not in common with both the info provides used in the MP you will get the results in 2 rows and the values for the ones which are not in common will be displayed as # in the results.
This can be the case in Infosets as well.
to over come this we use "constant selection"
Check the below link which explain the constant selection with an example.
http://sapbi101.blogspot.com/2010/05/constant-selection-in-query-apples-and.html
Maybe you are looking for
-
AUTODESK SUITE AND WINDOWS 8.1
For the last one year, I have been using my Autocad and Inventor Pro with no problems in my two PC. Late June 2014, I was asked my Microsoft to update my OS to Windows 8.1. I did as I have been doing every time Microsoft tells me to update their stuf
-
Hi friends, I have been searching for a month for a Notetaking app for the iphone which has these attributes: able to import/export notes from some form of text file suchas csv. I need to bring over a large number of notes from my android phone. I ca
-
How I can delete a game I download from apple store
Head soccer game I don't know how to uninstall it? anyone know
-
System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02
Hello experts, I get the following error when I execute the input ready query which was created on the aggregation level in BI IP. The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490. Thanks Terminate: System error i
-
Change Conf.Ctrl (ekpo-bstae) after goods receipt on ME22N
Hi all, we have the following issue: is it possible to change the field "confirmation control key" (ekpo-bstae) after goods receipt on transaction ME22N? Thanks in advance and best regards.