Problem in converting the spool to PDF.
Hi Experts,
By useing the prg RSTXPDFT4 I can able to download the pdf file.
but after that the pdf is not opening and showing the error as below
"There was an error opening this document.This file cannot be opened because it has no page"
Can anybody suggest for the above issue
Thanks &Regards
Sanujeet
Hi
Just cross verify if in SP02, for your spool request can you open and see the print preview of the print out by click on the sap Script type.
Check if the form is assigned to the message type.Check print preview of PO while creating PO
Thanks & regards,
kiran
Similar Messages
-
Convert ABAP Spool to PDF and display in BSP
Hello SDNers,
I have a requirement to display an R/3 report in Portal as PDF. I have chosen the route of creating a BSP which will show the report as PDF.
I will then create a BSP iView in Portal pointing to this application.
I am following the weblog /people/sap.user72/blog/2004/11/10/bsphowto-generate-pdf-output-from-a-bsp
and few SDN forums:
Display result of standard report RPTEDT00 within BSP
Re: PDF Output
I am new to BSP development and I am not able to put all the pieces of code together.
I would really appreciate if you can help me put the pieces together and help me out with this.
More details:
This custom report displays the summary of Benefits Cost Accounting (by PERNR and current year).
Once the report is run, I would like to get hold of the spool and convert the spool to PDF.
In my BSP I would like to get the spool (or the binary of the PDF) and display the report as PDF in the BSP application.
I have created the BSP application using the code given in the above weblog.
I am not sure how to proceed further with the requirement.
Looking forward for your suggestions and help.
Thanks,
KalyanHi kalyan,
go thru this wiki and you will have what you need all at one place. the piece you might want to look at is ABAP spool to PDF. It even contains complete code.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bsp/pdf
hope this helps. -
Converting the Transaction into PDF
Hi All,
How to convert the standard transaction PZ11 into PDF.
Presently this PZ11 giving the output in script format.
i need to convert it into PDF.
it is very urgent...
Pls do the needful..
Regardshi
good
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
message-id zz.
CONSTANTS *
constants : c_x(1) type c value 'X', " For constant value
c_otf(3) type c value 'OTF', " For format
c_u(1) type c value 'U'. " Mail Option
VARIABLES *
data : v_rqident type tsp01-rqident, " For Spool Number
v_rqclient type tsp01-rqclient, " For Client
v_rqo1name type tsp01-rqo1name, " For Object name
v_spool type tsp01-rqident, " For Spool Number
v_spool1 type tsp01-rqident. " For Spool Number
FLAGS *
data : f_spool type c.
INTERNAL TABLES *
Internal table for sending mails
data: it_pdf like tline occurs 10 with header line,
it_xi_pdf like tline occurs 0 with header line,
it_html like solisti1 occurs 0 with header line,
it_xi_temp like bapiqcmime occurs 0 with header line,
it_xi_mime(255) type c occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
variant like varid-variant,
end of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
kokrs like csks-kokrs,
kostl like csks-kostl,
datbi like csks-datbi,
telx1 like csks-telx1,
end of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
lower case
no-display.
select-options: s_email1 for v_char no intervals
lower case
no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION *
end-of-selection.
if f_spool = c_x.
message e000 with 'Spool Not Generated'(060).
endif.
*& Form fetch_data
To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform. " fetch_data
*& Form generate_spool
To send the output to spool
form generate_spool .
data: l_params like pri_params,
l_days(1) type n value 2,
l_count(3) type n value 1,
l_valid type c,
l_valid1 type c,
l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 255
LINE_COUNT = 65
layout = p_set
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params
valid = l_valid.
if l_valid <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit rkaep000 to sap-spool
using selection-set p_vara1
spool parameters l_params
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
f_spool = c_x.
if p_c2 is initial.
stop.
endif.
else.
Checking the format ( ABAP/OTF)
perform format_check tables s_email.
endif.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 200
LINE_COUNT = 65
layout = p_set1
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params1
valid = l_valid1.
if l_valid1 <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
using selection-set p_vara2
spool parameters l_params1
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
message e000 with 'Spool Not Generated'(060).
stop.
endif.
Checking the format ( ABAP/OTF)
perform format_check tables s_email1.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
endform. " generate_spool
*& Form fetch_recent_spool
Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
v_rqclient,
v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
rqclient
rqo1name
into (v_rqident , v_rqclient , v_rqo1name)
from tsp01
where rqcretime = ( select max( rqcretime )
from tsp01
where rq2name eq l_user
and rqfinal eq '.' ).
if sy-subrc = 0 .
p_v_spool = v_rqident.
endif.
endform. " fetch_recent_spool
*& Form format_check
Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
exporting
authority = 'SP01'(019)
client = v_rqclient
name = v_rqo1name
part = 1
importing
objtype = l_objtype
exceptions
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
perform convert_abap2pdf tables p_s_email.
endif.
endform. " format_check
*& Form convert_otf2pdf
Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_otf2pdf
*& Form convert_abap2pdf
Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_abap2pdf
*& Form send_mail
For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
objhead like solisti1 occurs 1 with header line,
objbin like solisti1 occurs 0 with header line,
objtxt like solisti1 occurs 10 with header line,
reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
it_objtxt , it_objtxt[],
it_objpack, it_objpack[],
it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
objbin-line = it_html-line.
append objbin.
clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
reclist-receiver = mail-low.
reclist-rec_type = c_u.
append reclist.
clear: reclist,
mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = c_x
commit_work = c_x
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
case sy-subrc .
when 0.
message i000 with 'Mail has been sent successfully'(006).
when others.
message e000 with 'Problem in sending the mail'(023).
endcase.
endform. " send_mail
*& Form page_format
For page foramtting
form page_format tables email structure s_email .
data : l_lines type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
l_tabix like sy-tabix.
clear : it_xi_pdf,
it_xi_temp.
refresh : it_xi_pdf,
it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf lines l_lines.
describe field it_xi_pdf length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
l_tabix = sy-tabix.
move it_xi_pdf to l_temp+l_offset.
if l_tabix = l_lines.
l_lineslen = strlen( it_xi_pdf ).
endif.
l_offset = l_offset + l_lineslen.
if l_offset ge l_mimelen.
clear it_xi_temp.
it_xi_temp = l_temp(l_mimelen).
append it_xi_temp.
shift l_temp by l_mimelen places.
l_offset = l_offset - l_mimelen.
endif.
if l_tabix = l_lines.
if l_offset gt 0.
clear it_xi_temp.
it_xi_temp = l_temp(l_offset).
append it_xi_temp.
endif.
endif.
endloop.
clear : it_xi_mime,
it_xi_mime[].
loop at it_xi_temp.
it_xi_mime(255) = it_xi_temp-line.
append it_xi_mime.
clear it_xi_mime.
endloop.
Final Data
clear : it_html,
it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform. " page_format
*& Form fetch_variants
For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
it_variant1[].
Get variants
perform get_variants tables it_variant1
using l_program.
F4 Help
if not it_variant1[] is initial.
perform get_f4_help tables it_variant1
using l_vara1
changing p_vara1.
else.
message e000 with 'No variants available for report1'(054).
endif.
endform. " fetch_variants
*& Form validation
For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_c1,
l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
l_c1 = '1'.
clear : s_email,
s_email[].
perform read_variants tables it_mailid
s_email
using p_vara1
l_pro1
l_c1.
if s_email[] is initial.
message e000 with 'No Id available for given Cost report1'(066).
else.
sort s_email by low.
delete adjacent duplicates from s_email comparing low.
endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
clear : s_email1,
s_email1[].
l_c2 = '2'.
perform read_variants tables it_mailid1
s_email1
using p_vara2
l_pro2
l_c2.
if s_email1[] is initial.
message e000 with 'No Id available for given Cost report2'(067).
else.
sort s_email1 by low.
delete adjacent duplicates from s_email1 comparing low.
endif.
endif.
endform. " validation
*& Form GET_VARIANTS
Fetching Variants
form get_variants tables p_it_variant structure it_variant1
using p_v_program type rs38m-programm.
select variant
from varid
into table p_it_variant
where report = p_v_program.
endform. " GET_VARIANTS
*& Form GET_F4_HELP
text
form get_f4_help tables p_it_variant1 structure it_variant1
using p_l_vara1 like dfies-fieldname
changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = p_l_vara1
value_org = 'S'
display = ' '
tables
value_tab = p_it_variant1
return_tab = it_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
p_p_vara = it_return-fieldval.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_F4_HELP
*& Form FETCH_VARIANTS1
text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
it_variant2[].
Get Variants
perform get_variants tables it_variant2
using v_program1.
F4 Help
if not it_variant2[] is initial.
perform get_f4_help tables it_variant2
using l_vara2
changing p_vara2.
else.
message e000 with 'No variants available for report2'(050).
endif.
endform. " FETCH_VARIANTS1
*& Form read_variants
Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
p_s_email structure s_email
using p_p_vara1 like p_vara1
p_l_pro1 like rs38m-programm
p_l_c1 type c.
data : l_temp(44),
it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
exporting
report = p_l_pro1
variant = p_p_vara1
tables
valutab = it_valutab
exceptions
variant_non_existent = 1
variant_obsolete = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
r_cocen[].
loop at it_valutab where selname = 'KOSTL'
or selname = '_C-CCTR'.
Getting the range of cost centers
if it_valutab-option = 'BT'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-high = it_valutab-high.
For Conversion Routine
perform conversion using r_cocen-high.
r_cocen-option = 'BT'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
Getting the single cost centers
if it_valutab-option = 'EQ'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-option = 'EQ'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
select kokrs
kostl
datbi
telx1
from csks
into table p_it_mailid
where kostl in r_cocen.
if p_it_mailid[] is initial.
if p_l_c1 = '1'.
message e000 with 'No IDs available for report1'(059).
elseif p_l_c1 = '2'.
message e000 with 'No IDs available for report2'(062).
endif.
endif.
Deleting the blank entries
delete p_it_mailid where telx1 = space.
clear l_temp.
read table p_it_mailid index 1.
l_temp = p_it_mailid-telx1.
data : l_check.
loop at p_it_mailid where telx1 <> l_temp.
l_check = c_x.
endloop.
For checking the unique ids
if l_check = c_x.
if p_l_c1 = '1'.
message e000 with 'No unique mail-ids for report1'(058).
elseif p_l_c1 = '2'.
message e000 with 'No unique mail-ids for report2'(065).
endif.
endif.
Populating the IDs for the cost centers
loop at p_it_mailid.
set locale language sy-langu.
translate p_it_mailid-telx1 to lower case.
set locale language space .
concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
p_s_email-low = l_temp.
p_s_email-sign = 'I'.
p_s_email-option = 'EQ'.
append p_s_email.
clear p_s_email.
endloop.
else.
if p_l_c1 = '1'.
message e000 with 'No Cost Center Available for report1'(057).
elseif p_l_c1 = '2'.
message e000 with 'No Cost Center Available for report2'(063).
endif.
endif.
endform. " read_variants
*& Form CONVERSION
For Conversion Routine
form conversion using p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_it_valutab_low
importing
output = p_it_valutab_low.
endform. " CONVERSION
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
thanks
mrutyun^ -
Convert the spool to xls format and email through attachment to the user
Hi all,
When I execute a report in background, I get spool. I need to convert the spool to xls format and email through attachment to the user.The xls file should not be saved on local system.
If I use the Spool Recepient tab in SM37 it mails the spool list as .txt file to the mail receipient. But I need to send it as an .xls file.
Can any one help me on thisDid you get the solution? i have the same problem.
-
Alignment problem in converting smartform printpreview into PDF
Hi all,
I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
kindly suggest something so that alignment is not changed while converting to PDF.
Regards,
Sumalathause below f.m to convert it into 255 characters....
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = i_tline
t_target_tab = so_ali[]
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2. -
Hi experts,
I'm looking for a possibility to conbvert a Spool-request to PDF fomrat.
Following situation:
I have a Web Dynpro that creates a page with a few material details. I can now export this to Excel, but now the requeiremt is also to convert it to PDF.
We don't have ADS, so I can't use Adobe forms. First, I tried to create a Smartform and convert this to PDF which will work. But I have also a few pictures included which come from a Web Service (as JPG). After searchin a while I found a possibilty to convert them to TIF and insert them in SE78 automatically. But this takes to much time and as a result of insert them to SE78, the colors will change (only 256 colors).
Next idea was to generate a HTML-Mail out of my Smartform (regaring this blog /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp) what works perfectly now.
So now I have a Spool in SOST which contains a HTML file. OK, looks great, all pictures are included, takes not much time - but how to convert this to PDF?
Anybody any ideas?Hi experts,
after searching the whole forum and internet, I don't find any solution.
Maybe the convertion from Spool to PDF is not possible...
OK, another idea:
I read that the wrong colors result from the different color depth (16/24 bit vs 256 colors). So my last idea is to convert the image before inserting into BDS (SE78), automatically done by SAP.
Is there any function/coding you know which can convert me a image from 24bit to 256 colors? If so, I can convert the image and then insert into BDS... -
To convert smartform spool to pdf
Hi all,
I need to convert smartfom spool to pdf..
When i executed the smartform it is generating a spool number and
tsp01-rqdoctype = 'SMART'.
To convert Spool to PDF Iam using the following function module
'CONVERT_ABAPSPOOLJOB_2_PDF'
It is converting to pdf only if the document type is 'LIST'.
can any one suggest me how to convert smartform spool to pdf?
Regards
cnuHi
Refer to this link :
Re: smartform output to mail
Reward if useful
Thanks
Krushna -
Converting Postscript spool to PDF spool
I have WWI reports that are generated by the WWI generation server with spool in postscript format. Is there a function module available to convert Poscript spool to PDF?
Have you tried with sap standard program RSTXPDFT4 ?
a® -
When I convert the Adobe 10 PDF to Adobe LiveCycle ES2 it is a static document, thus not allowing me to make the text boxes expandable. How do I take a current Adobe 10 PDF with Text and convert it to Adobe LiveCycle ES2 so that I can make the text boxes expandable?
Hi Alan,
TextField objects can expand dynamically. There are a few things that you need to do:
1. The TextField object should be contained in a subform that is set to Content: Flowed. This isn't technically necessary, but if you have anything below the expanding text box and the subform is set to Positioned, the text will expand and overlay what's below.
2. On the Field tab of the text field's Object property tab, check the Allow Multiple Lines checkbox
3. On the Layout tab, check the Expand To Fit checkbox under Y:/Height
4. Set the PDF Render Format under Form Properties/Defaults to Dynamic XML Form. If you're previewing in Designer, don't forget to set the preview to Dynamic too.
Regards,
Rave -
Hello,
I have includes a Web link in an image.
When I convert the document in PDF, the link remains inactive. Could use me?
Thank you.No version of Pages will allow images to be links. We always got around this by bracketting the image with text and making the link in that.
Pages 5 has lost the ability to have cross links in pdfs and seems to have a bug that disables any links after the first page.
Peter -
How to write adapter module to convert the xml to pdf file
Hi all,
how to write adapter module to convert the xml to pdf file.
Please any body assist step by step procedure.PI 7.1 XML to PDF transformation
have you seen below links:
http://forums.sdn.sap.com/thread.jspa?threadID=1212478
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14363 -
Problem with characters Converting OTF Spool to PDF
Hello All,
Im working on ECC6.0 system. I have a Z report where it will take spool number and mail ID as input.
It will check wheter the spool is of type OTF of ABAP List, according to that it will use the FMs ONVERT_OTFSPOOLJOB_2_PDF & CONVERT_ABAPSPOOLJOB_2_PDF.
Now it will download the PDF internal table data into a file using OPEN DATA SET statement as shown below.
OPEN DATASET gv_dsn FOR OUTPUT IN BINARY MODE.
*Download the file to application server
LOOP AT gt_pdf_output.
TRANSFER gt_pdf_output TO gv_dsn.
ENDLOOP.
CLOSE DATASET gv_dsn.
and it will ZIP the PDF as shown below.
* open the file from application server for zipping.
OPEN DATASET gv_dsn FOR INPUT IN BINARY MODE.
READ DATASET gv_dsn INTO lv_content.
CLOSE DATASET gv_dsn.
CREATE OBJECT go_zip.
go_zip->add( name = gv_file content = lv_content ).
gv_zip_content = go_zip->save( ).
* Convert the xstring content to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = gv_zip_content
IMPORTING
output_length = gv_file_length
TABLES
binary_tab = gt_data.
After that the ZIP file conataining the PDF will be sent as an attachement to the mail ID given as input.
Now the problem is some characters of Czech are not coming properly when the attachement is opend once the mail is received. Can any one tell where the problem is and solution.
Im getting the message "Can not extract the embedded front 'CourierNewL2'. Some characters may not display or print correctly." while opening the PDF in the ZIP attachment.
Thank you.
Best Regards,
Sasidhar Reddy Matli.hi
u also check the following link
Re: how call FM otf to pdf in a report
Re: otf to pdf
Re: Error while converting OTF into PDF in CONVERT_OTF FM
Re: Convert OTF to PDF problem
Edited by: krupa jani on Jul 15, 2009 12:58 PM -
Converting the spool request to PDF format
Dear All ,
I am using RSTXPDF4 to convert a spool request to PDF format , when I execute this program by giving the spool number and dstdevic as Local , its giving the message as " Spool request XXXXX with PDF data created ".
But the problem is when I open this spool request its printing the Junk characters ..!!!
What could be the problem ?
Please give me the solution for this...
Thanks in advance.Hi Prem ,
I have checked the tranx SCOT there I have found the following settings..
Output Dev Type USE
format
PCL HPLJIIID Not Yet Used in Node Maintenance
PDF PDF1 Already Used in Node Maintenance
PS POST2 Not Yet Used in Node Maintenance
TXT ASCIIPRI Already Used in Node Maintenance
Is this OK ...or am I need to do any changes in the settings...??
One more thing when I tries to give this PDF1 Dev type in my RSTXPDF4 input parameters its not taking !!!
Please help... -
Create Spool from Internal table & converrt the spool to PDF
Hi All,
My requirement is take data from a table and find amount specific to each Vendors . So I took all the data into ITAB and do all the calculation. Later after calculation I have to create a spool from this ITAB and this spool have to convert to PDF. Later this PDF have to seend via email.
To convert the internal table to Spool , I used
LOOP AT t_summ INTO wa_summ.
w-amount = wa_summ-remittanceamount.
CONCATENATE wa_summ-vendorcode
wa_summ-controlnum
w-amount INTO wa_textdata SEPARATED BY space.
APPEND wa_textdata TO t_textdata.
ENDLOOP.
DESCRIBE TABLE t_textdata .
w-file_length = syst-tfill * 1022.
l_doctype = 'LIST'.
l_layout = 'X_POSTSCRIPT'.
CONCATENATE ' Listbill Summary Report for' syst-datum INTO
l_title SEPARATED BY space.
l_receiver = syst-uname.
* Create Spool
CALL FUNCTION 'RSPO_SR_OPEN'
EXPORTING
dest = 'LOCL'
* LDEST =
layout = l_layout
name = 'SUMREP'
* SUFFIX1 =
* SUFFIX2 =
copies = '1'
* PRIO =
* immediate_print = ' '
* AUTO_DELETE =
titleline = l_title
receiver = syst-uname "
* division = l_pri_params-prabt " abteilung
* authority = l_pri_params-prber "
* POSNAME =
* ACTTIME =
* LIFETIME = '8'
* APPEND =
* COVERPAGE =
* CODEPAGE =
doctype = l_doctype
* ARCHMODE =
* ARCHPARAMS =
* TELELAND =
* TELENUM =
* TELENUME =
IMPORTING
handle = l_spool_handle
spoolid = w-spoolid
EXCEPTIONS
device_missing = 1
name_twice = 2
no_such_device = 3
operation_failed = 4
OTHERS = 5
. "#EC DOM_EQUAL
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'SLVC_C1022_TO_C255'
EXPORTING
i_file_length = w-file_length
TABLES
it_c1022 = t_textdata
et_c255 = lt_spool.
l_length = w-file_length.
LOOP AT lt_spool INTO ls_spool.
l_length = l_length - 255.
IF ( l_length > 0 ).
l_line_length = 255.
ELSE.
l_line_length = l_length + 255.
ENDIF.
* Write contents to spool
CALL FUNCTION 'RSPO_SR_WRITE'
EXPORTING
handle = l_spool_handle
text = ls_spool
length = l_line_length.
ENDLOOP.
* Close Spool
CALL FUNCTION 'RSPO_SR_CLOSE'
EXPORTING
handle = l_spool_handle
pages = 1
FINAL = 'X'
EXCEPTIONS
handle_not_valid = 1
operation_failed = 2
OTHERS = 3
By this I can see the spool with data in SP02.
Then to conver to PDF, I used
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = w-spoolid
no_dialog = 'X'
DST_DEVICE = 'LOCL'
* PDF_DESTINATION =
IMPORTING
* PDF_BYTECOUNT =
* PDF_SPOOLID =
list_pagecount = list_pagecount
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
pdf = t_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = 'D:\t\t.pdf'
filetype = 'BIN'
TABLES
data_tab = t_pdf
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
But later when I go and open the PDF, I am getting an error saying'Page cannot be open because it dont have any pages'
Please help me
Regards,
NikhilHi Nikhil,
<li>If you are still not able to find out the problem. You can an alternative way , which is used for the same purpose.
<li>Try this way. It creates spool and and same CONVERT_ABAPSPOOLJOB_2_PDF fm is used to convert spool to PDF. It works. Test this test program.
REPORT ztest_notepad.
DATA:g_val TYPE c,
w_pripar TYPE pri_params,
w_arcpar TYPE arc_params,
i_pdf TYPE TABLE OF tline,
spoolid LIKE tsp01-rqident,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname,
l_jobcount LIKE tbtcjob-jobcount.
DATA:it_t001 TYPE TABLE OF t001 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE it_t001.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = w_arcpar
in_parameters = w_pripar
layout = 'X_65_132'
line_count = 65
line_size = 132
no_dialog = 'X'
IMPORTING
out_archive_parameters = w_arcpar
out_parameters = w_pripar
valid = g_val.
IF g_val NE space AND sy-subrc = 0.
w_pripar-prrel = space.
w_pripar-primm = space.
NEW-PAGE PRINT ON NEW-SECTION PARAMETERS w_pripar ARCHIVE PARAMETERS w_arcpar NO DIALOG.
ENDIF.
LOOP AT it_t001.
WRITE:/ it_t001.
ENDLOOP.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
spoolid = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spoolid
no_dialog = ' '
IMPORTING
pdf_bytecount = l_no_of_bytes
pdf_spoolid = l_pdf_spoolid
btc_jobname = l_jobname
btc_jobcount = l_jobcount
TABLES
pdf = i_pdf.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\temp\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf.
Thanks
Venkat. -
Convert Screen(spool) to PDF file sending mail with attach file
Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = p_spool
first_line = 1
last_line = 0
desired_type = ' '
IMPORTING
real_type = real_type
sp_lang = sp_lang
TABLES
buffer = so_ali
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
+ STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
sender_address = v_name
sender_address_type = 'B'
TABLES
packing_list = plist
contents_bin = so_ali
receivers = rec_tab
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren
Maybe you are looking for
-
Hi, I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Erro
-
I am trying to use dual monitors with a PXI-8108 and the NI DVI splitter as described here http://digital.ni.com/public.nsf/allkb/0E993D33675CD46A862572D50072C6A3 There must be some software update I need because I don't not have an option for the se
-
Replacing T510 hard disk - 2 questions...
Hello All, I have a T510 with 320Gb hard disk. I want to replace the hard disk with something with more capacity. I have 2 questions: Will this void my warranty - I have 500+ days left Can I take a complete copy of the hard disk and have all my appli
-
Wifi function key is not working in hp laptop
hello everyone... My hp elite book 8450p wifi function key sometimes dissabled and shows red mark on wifi sign in the laptop corner and could not connect thorough wifi until system restart. please let me know where is the actual problem and how i cou
-
Multiple inbound interfaces (xml) but one target (idoc)
Hi Experts, I am trying to setup in ID four inbound interfaces (eg. MessageType1-MesageType4) and each has an interface mapping having the same target idoc (eg. Shpmnt05). Also, there is a condition set per interface mapping. Should I create four se