Problem in creaing the logical tables by SELECT statement

Hi,
I have created logical tables in the physical layer of the OBIEE tool by "select statement". Connection Pool is set up properly for the repository. Rows of the tables are updating properly by clicking to the "Update Row Count" but when I am clicking to the "View Data" it shows the following error
[nQSError:17001] Oracle Error code:936, message: ORA-00936:missing expression at OCI call OCIStmtExecute.
[nQSError:17010]SQL statement preparation failed.
Also for some tables data is coming properly by clicking to the "View Data" .
I'm stack in this point and cannot move forward. Please, help me guys.
Thanks
Sandeep

Hi
I also face same type of error. Just do one thing Change the call interface OCI 10g to ODBC 3.5 and on Feature tab click revert to default.
I think that will work properly.
Best of Luck
Thanks
SIddhartha P

Similar Messages

[38133] The Logical Table [...] is not joined to any other logical table.

Hi all!
I'm very new to Oracle BI EE. My need is to create my first report in BI. I've opened Oracle BI Administration Tool, created new repository, added physical tables, created new item named "reports" in "Business Model and Mapping" section, made "drug-n-drop" my physical tables into new item. Now when I run "check consistency" on "reports" item it returns errors:
Business Model reports:
[38133] The Logical Table '"reports"."table1"' is not joined to any other logical table.
[38133] The Logical Table '"reports"."table2"' is not joined to any other logical table.
[38133] The Logical Table '"reports"."table3"' is not joined to any other logical table.Could you please help me with these errors?
Oracle Business Intelligence 11.1.1.6.0

Looks like you drag-n-drop each table, try to all at once with that all physical layer joins are come and treated as logical joins. Other wise try to create them manually.
drag-n-drop always is not possible so we have to go for manually.
If this is not in your case let me know else pls mark as correct/helpful

Handling Outer Join for hard coded values in the Logical Table Source

Has anyone tried to apply an outer join in the Logical Table Source Content Tab?
I have to add this APPLSYS.FND_LOOKUP_VALUES.LANGUAGE (+)= 'US' but the outer join is not allowed. I get this message.... [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] .
Could you tell me please how this should be handled? I have a lot of this cases in my project and without this being set-up affects the expected output of my report.
Thank you in advance.

hi Ap,
Pull only Dim_W_LOV_D_Acty_Src column into answers and check whether u r able to see CUST_SRC_ACT or not .Of course, you need to check sql query too
Thanks,
Saichand.v

Regarding Logical database and select statement..

Hi
Experts.
i would like to know the diff b/w logical data base & select statement while using report.
wt is the use of logical databases in R/3. is there   any   advantage used in the reports.
Thanks & Regards..
Spandana.

Dear Spandana,
Go through the below description of LDB. I hope you wil get a fair amount of idea.
SAP comes loaded with all the extras. Among the extras that are most helpful to IT managers are all the access routines needed to pull any business object that managers can think of out of SAP databases. However, SAP has not thought of everything where your particular applications are concerned. SAP organizes its standard database tables to service business units based on conventional business applications. Itu2019s likely your business requires something new, perhaps even something exotic. In that case, you will need to create a new database, using information from different places. Basically, you need a logical database. You need to create a virtual business data object repository consisting of a new kind of record or table that suits your purposes. In addition, the repository should be composed of information that is actually stored in a number of different locations, none of them necessarily logically associated with one another. Letu2019s take a closer look at creating logical databases.
A case for a logical database
Suppose my company manufactures widgets of the most obscure variety, and they are components of other widgets. I sell my widgets as raw material for the more sophisticated widgets built by others, but in some cases I actually partner with other manufacturers in creating yet another class of widget. Now, in my world, I consequently have customers who are also partners. I sell to them and I partner with them in manufacturing and distribution. Also, I need an application that uses both of these dual-use relationships.
Essentially, I have a customer database and a partner database. Neither contains records that are structured to contain the identifying particulars of the other. Thus, I need a hybrid database that gives me tables detailing these hybrid relationships. What can I do? I can go the long way around and write a new database, pulling information from both and creating new objects with a customized program that I write by hand. However, this process is cumbersome and contains maintenance issues. On the other hand, I can use SAPu2019s logical database facility, create my logical database in a couple of minutes, and have no maintenance issues at all.
Logical database structures
There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
u2022     Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
u2022     Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
u2022     Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
Creating your own logical database
ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
1.     Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
2.     Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
3.     Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
4.     Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
Watch out!
The use of very large tables will degrade the performance of a logical database, so be aware of that trade-off. Remember that some tables in SAP are very complex, so they will be problematic in any user-defined logical database.
Declaring a logical database
Hereu2019s another surprising feature of logical databases: You do not assign them in your ABAP/4 Code. Instead, the system requires that you specify logical databases as attributes. So when you are creating a report, have your logical database identifier (the name you gave it) on hand when you are defining its attributes on the Program Attributes screen. The Attributes section of the screen (the lower half) will include a Logical database field, where you can declare your logical database.
Logical databases for increasing efficiency
Why else would you want to create a logical database? Consider that the logical databases already available to you begin with a root node and proceed downward from there. If the data object you wish to construct consists of items that are all below the root node, you can use an existing logical database program to extract the data, then trim away what you donu2019t want using SELECT statementsu2014or you can increase the speed of the logical database program considerably by redefining the logical database for your object and starting with a table down in the chain. Either way, youu2019ll eliminate a great deal of overhead.
Regards
Arindam

Using plsql tables in select statement of report query

Hi
Anyone have experience to use plsql table to select statement to create a report. In otherwords, How to run report using flat file (xx.txt) information like 10 records in flat files and use this 10 records to the report and run pdf files.
thanks in advance
suresh

hi,
u can use the utl_file package to do that using a ref cursor query in the data model and u can have this code to read data from a flat file
declare
ur_file utl_file.file_type;
my_result varchar2(250);
begin
ur_file := UTL_FILE.FOPEN ('&directory', '&filename', 'r') ;
utl_file.get_line(ur_file, my_result);
dbms_output.put_line(my_result);
utl_file.fclose(ur_file);
end;
make sure u have an entry in ur init.ora saying that your
utl_file_dir = '\your directory where ur files reside'
cheers!
[email protected]

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

How to compile the hint to force selection statement to use index

Hello expert,
will you please tell me how to compile the hint to force selection statement to use index?
Many Thanks,

Not sure what you mean by compile, but hint is enclosed in /*+ hint */. Index hint is INDEX(table_name,index_name). For example:
SQL> explain plan for
2 select * from emp
3 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 3956160932
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |    14 |   546 |     3   (0)| 00:00:01 |
|   1 | TABLE ACCESS FULL| EMP |    14 |   546 |     3   (0)| 00:00:01 |
8 rows selected.
SQL> explain plan for
2 select /*+ index(emp,pk_emp) */ *
3 from emp
4 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 4170700152
| Id | Operation                   | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |        |    14 |   546 |     2   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| EMP    |    14 |   546 |     2   (0)| 00:00:01 |
|   2 |   INDEX FULL SCAN           | PK_EMP |    14 |       |     1   (0)| 00:00:01 |
9 rows selected.
SQL> Hint in the above example is forcing optimizer to use index which resul;ts in a bad execution plan. Most of the time optimizer does not need hints and chooses an optimal plan. In most cases sub-optimal plan is result of stale or incomplete statistics.
SY.

Performance problem(ANEA/ANEP table) in Select statement

Hi
I am using below select statement to fetch data.
Does the below where statement have performance issue?
can you Pls suggest.
1)In select of ANEP table, i am not using all the Key field in where condition. will it have performance problem?
2)does the order of where condition should be same as in table, if any one field order change also will have effect performance
SELECT bukrs
         anln1
         anln2
         afabe
         gjahr
         peraf
         lnran
         bzdat
         bwasl
         belnr
         buzei
         anbtr
         lnsan
    FROM anep
    INTO TABLE o_anep
    FOR ALL ENTRIES IN i_anla
   WHERE bukrs = i_anla-bukrs
     AND anln1 = i_anla-anln1
     AND anln2 = i_anla-anln2
     AND afabe IN s_afabe
     AND bzdat =< p_date
     AND bwasl IN s_bwasl.
SELECT bukrs
         anln1
         anln2
         gjahr
         lnran
         afabe
         aufwv
         nafal
         safal
         aafal
         erlbt
         aufwl
         nafav
         aafav
         invzv
         invzl
    FROM anea
    INTO TABLE o_anea
    FOR ALL ENTRIES IN o_anep
   WHERE bukrs = o_anep-bukrs
     AND anln1 = o_anep-anln1
     AND anln2 = o_anep-anln2
     AND gjahr = o_anep-gjahr
     AND lnran = o_anep-lnran
     AND afabe = o_anep-afabe.
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Aug 9, 2011 9:37 AM

1. Yes. If you have only a few primary keys in youe WHERE condition that does affect the performance. But some times requirement itself may be in that way. We may not be knowing all the primary keys to given them in WHER conditon. If you know the values, then provide them without fail.
2. Yes. It's better to always follow the sequence in WHERE condition and even in the fields being fetched.
One important point is, whenever you use FOR ALL ENTRIES IN, please make sure that the itab IS NOT INITIAL i.e. the itab must have been filled in. So, place the same conditin before both the SELECT queries like:
IF i_anla[] IS NOT INITIAL.
SELECT bukrs
         anln1
         anln2
         afabe
         gjahr
         peraf
         lnran
         bzdat
         bwasl
         belnr
         buzei
         anbtr
         lnsan
    FROM anep
    INTO TABLE o_anep
    FOR ALL ENTRIES IN i_anla
   WHERE bukrs = i_anla-bukrs
     AND anln1 = i_anla-anln1
     AND anln2 = i_anla-anln2
     AND afabe IN s_afabe
     AND bzdat =< p_date
     AND bwasl IN s_bwasl.
ENDIF.
IF o_anep[] IS NOT INITIAL.
SELECT bukrs
         anln1
         anln2
         gjahr
         lnran
         afabe
         aufwv
         nafal
         safal
         aafal
         erlbt
         aufwl
         nafav
         aafav
         invzv
         invzl
    FROM anea
    INTO TABLE o_anea
    FOR ALL ENTRIES IN o_anep
   WHERE bukrs = o_anep-bukrs
     AND anln1 = o_anep-anln1
     AND anln2 = o_anep-anln2
     AND gjahr = o_anep-gjahr
     AND lnran = o_anep-lnran
     AND afabe = o_anep-afabe.
ENDIF.

Variable in where clause of the logical table

Hi,
is it possible to define a variable in "where" clause of rpd's physical table (table type - select)? If yes, pls elaborate the steps including how to refresh it with every end user's request?
Thanks and Regards,
Igor
P.S.
If not, is there any workaround?

Nico
thanks, but I am afraid that is not my case. I need to refresh variable value interactively with every query by a dashboard prompt. To illustrate my need just imagine a recursive SQL (defined as a view/logical table in rpd):
SELECT ....
FROM ...
WHERE ...
START WITH .... columnA=variable1
CONNECT BY PRIOR .... and columnB=varariable2;
or
SELECT c1,c2,c3,c4 from tabA where c1='A' and c2=variable1
union
SELECT c1,c2,c3,c4 from tabA where c1='A" and c2='D' and c1 NOT IN ( SELECT c1 FROM tabA where c1='A' and c2=variable1 );
So, what I want to do is to pass value(s) to my variable(s) every time when respective select (view) is executed. I see above selects are not typical ones the OBI EE is intended for but nevertheless I wonder if such kind of reports are possible to do in OBI EE.
Thanks and Regards,
Igor

How imrove the peformance of VBFA table in select statements.

Hi,
whenever execute program in production, program execution will taking long time due to below select statement.
Please help me how we imrove performance?
SELECT vbelv vbeln posnn vbtyp_v
FROM vbfa
INTO TABLE l_i_vbfa
FOR ALL ENTRIES IN l_i_bill_cs
WHERE vbeln EQ l_i_bill_cs-vbeln
AND posnn EQ '000010'
AND vbtyp_n IN ('K', 'H'). "MOD-024--
AND vbtyp_v IN ('K', 'H'). "MOD-024++
SORT l_i_vbfa BY vbeln vbtyp_n.
Regards,
Naidu
Moderator message: third time I have to remind you: for performance problems with VBFA table please search for previous discussions of the same topic
Edited by: Thomas Zloch on Nov 9, 2010 12:41 PM

Hi Naidu,
ranges: r_vbtypv type vbfa-r_vbtyp_v.
CLEAR r_vbtypv.
r_vbtypv-option = 'EQ'.
r_vbtypv-sign   = 'I'.
r_vbtypv-low    = 'K'.
APPEND r_vbtypv.
CLEAR r_vbtypv.
r_vbtypvl-option = 'EQ'.
r_vbtypv-sign   = 'I'.
r_vbtypv-low    = 'H'.
APPEND r_vbtypv.
sort l_i_bill_cs by vbenl.
if not l_i_bill_cs[] is initial.
SELECT vbelv vbeln posnn vbtyp_v
FROM vbfa
INTO TABLE l_i_vbfa
FOR ALL ENTRIES IN l_i_bill_cs
WHERE vbeln EQ l_i_bill_cs-vbeln
AND posnn EQ '000010'
AND vbtyp_v IN r_anlkl.
endif.
SORT l_i_vbfa BY vbeln vbtyp_n.
Thanks,
Nelson

Picking the right values from tables - SQL (select statement)

Hi everyone,
I'm facing the litlle(?) problem in Oracle environment.
Let me explain:
I have two tables.
TABLE 1
Id1 | Val1 | Id2 | Val2
A | 44 | B | 36
B | 36 | A | 44
TABLE 2
Id | Name
A | New York
B | Seattle
I need to get from those tables, using SQL statement, result like this:
Id1 | Val1 | Name1 | Id2 | Val2 | Name2
A | 44 | New York | B | 36 | Seattle
NOTE !! Very important!! If in table 1 we have crossed the same values in fields IdX and ValX in two rows (like in example)- just one of them should be presented as a result.
I'm afraid it's a bit too complex. You, guys are my last hope.
Looking forward for any solutions.
Thanks in advance!

jeneesh wrote:
This can give you a startJaneesh, the OP specified that the duplication was across the ID and the VAL columns, but your solution only checks the ID's..
SQL> ed
Wrote file afiedt.buf
1 with t1 as (select 'A' as id1, 44 as val1, 'A' as id2, 36 as val2 from dual union all
2              select 'A', 36, 'A', 36 from dual)
3      ,t2 as (select 'A' as id, 'New York' as name from dual union all
4              select 'B', 'Seattle' from dual)
5 -- END OF TEST DATA
6 select distinct greatest(id1,id2) id1,
7         case when id1 > id2 then val1 else val2 end val1,a.name name1,
8         least(id1,id2) id2,
9         case when id1 < id2 then val1 else val2 end val2,b.name name2
10 from t1 t,t2 a,t2 b
11 where greatest(id1,id2) = a.id
12* and least(id1,id2) = b.id
SQL> /
I       VAL1 NAME1    I       VAL2 NAME2
A         36 New York A         36 New York
SQL>With this data I would have expected both rows to be returned as there is a difference in the val columns..
SQL> ed
Wrote file afiedt.buf
1 with t1 as (select 'A' as id1, 44 as val1, 'A' as id2, 36 as val2 from dual union all
2              select 'A', 36, 'A', 36 from dual)
3      ,t2 as (select 'A' as id, 'New York' as name from dual union all
4              select 'B', 'Seattle' from dual)
5 -- END OF TEST DATA
6      ,t3 as (select distinct id1, val1, id2, val2
7              from
8                (
9                 select decode(switch,1,id2,id1) as id1
10                       ,decode(switch,1,val2,val1) as val1
11                       ,decode(switch,1,id1,id2) as id2
12                       ,decode(switch,1,val1,val2) as val2
13                 from (select id1, val1, id2, val2
14                             ,case when id1||val1 > id2||val2 then 1 else 0 end as switch
15                       from t1)
16                )
17             )
18 --
19 select t3.id1, t3.val1, t2_1.name
20        ,t3.id2, t3.val2, t2_2.name
21 from   t3 join t2 t2_1 on (t2_1.id = t3.id1)
22*           join t2 t2_2 on (t2_2.id = t3.id2)
SQL> /
I       VAL1 NAME     I       VAL2 NAME
A         36 New York A         36 New York
A         36 New York A         44 New York

Extraction Problem- while filling the setup table

Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !

Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM

Problem while filling the setup table

Hi experts,
i am extracting data from 2lis_12_vcitm, while filling the setup table it showing bellow error message,
NO EXTRACT STRUCTURE ACTIVATE OR NO BW CONNECTED
but i Extract structure is in active mode and BW connection also is there.
what is the problem,
please help me,
answer will be appreciated with full points,
regards,
venkat

Hi Venkata,
If u are looking for reinitialization to ur targets and which needs the refilling of setup tables then u need to perform the following activities.
Try to take the down time in R3 to stop the posting.
try to empty the queue(both the extraction and Delta queue in R3 and deeavtivate the V3 update) and then delte the data in ur targets in BW which are getting feeded from these Data sources and remove the init flag at the Infopackage level for the respective DS's.
And then check if there is any blocked records in SM13 for ur application.
Delete the existing set up for the application 12.
And then refill the setup tables (may be u can think of multiple setups to make this execution faster and to reduce the R3 load).
Once the setup is done.. then take init-without data transfer for ur DS's in BW and then activate the V3 in R3.Down time can be taken off here.
and then take repair full load(which carry all of ur Setup tables data to ur targets). Once the repair is done then u can look for the regular deltas...
For more information u can search SDN on the same..
thanks
Assign points if this helps

Problem with downloading the internal table onto the presentation server.

Hey folks,
I have a problem where in i am downloading one year of sales done by the company. I wrote a program to download the file onto the presentation server . The error occurs in the FM GUI_DOWNLOAD where if the file exceeds 105843504 bytes its giving me a dump saying that
When the program was running , it was established that more memory was needed than the operating system is able to safely to provide.
The current program has to be terminted because of the program already requested 105843504 bytes from the operating system with malloc when the operating system reported after further memory request that there was no more memory space available.
Could somebody provide an alternative soltuion for this.
Its really urgent as i can download the file with 70,000,000 bytes
Regards
Rock

Hi Rock,
Please download the files on to Application Server, else as suggested by Ashish download into 2 or 3 files and merge them manually.
Declare same internal tables may be 5 times.
When you fill the internal table check for a counter and when you hit a certain number stop appending to it and start appending to the next.
After you are done so download all the internal tables.
I guess this would be a good way. I am not sure if there are any ther alternative good methods.
Hope this helps.
Shreekant

Records are getting overwritten in the internal table using Select query.

Hi All,
I have following query :
Loop at i_salesplant.
       select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
       into corresponding fields of table i_zallocpol from mara inner join mvke on
       mvkematnr = maramatnr
       where MARA~zzobjtype = I_ZZOBJTYPE
         and MVKE~VKORG = i_salesplant-vkorg
         and MVKE~VTWEG = T_VTWEG.
     ENDLOOP.
My Que : For example lets say first it selects all the records for Sales Org 1000. Next when you select the records for the Sales Org 2000 the earlier records are getting overwritten.
Please let me know your valuable inputs.
Thanks,
Chandravadan

Hi,
Thanks alot for the reply.
I changed query using appending as follows :
      Loop at i_salesplant.
        select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
         into appending corresponding fields of table i_zallocpol from mara inner join mvke on
        mvkematnr = maramatnr
        where MARA~zzobjtype = I_ZZOBJTYPE
          and MVKE~VKORG = i_salesplant-vkorg
          and MVKE~VTWEG = T_VTWEG.
      ENDLOOp.
But it is giving error saying " Field "APPENDING" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "
Please suggest.
Thanks,
Chandravadan

Problem in creaing the logical tables by SELECT statement

Similar Messages

Maybe you are looking for