Problem in creating an RFC

hi
i am creating an RFC in that i need start date and end date as my import parameters
but now the system is showing a message like
'Reference parameters are not allowed with RFC'
then how can i resolve this

Hi,
All the parameters should be Pass by value.
Tick that button in the import parameters tab.
For RFCs all the parameters should be pass by value.
Call by value
You pass the parameter with values. This means that the parameter contents are copied both when the parameter is passed and when it is transferred back to the calling parameter. For structures that contain tables, performance may be reduced considerably. Therefore, you should not do this.
Regards,
sasi
Edited by: sasidhar yalamanchili on Apr 18, 2008 11:18 AM

Similar Messages

Problem in creating RFC

Hi All,
I am facing problem in creating RFC from lower to higher version of SAP, while creating RFC from ECC 5.0 to ECC 6.0 the system is not saving logon/security information, when i click on remote login it ask user n pwd again, please let me know the solution.
Thanks in advance
Shazia Khan

Hi Bala,
The exception given is only that much.
When I try to create the RFC, a Dialog box pops up and the error given is

ERROR file opened at 20070516 111750 India Standard, SAP-REL 640,0,154 RFC-VER 3 864900 MT-SL
T:5512 Error in program 'javaw': ======> You are not authorized to logon to the target system.
T:5512 Error in program 'javaw': <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION

Please help me out.
regards
Brahmachaitanya

Problem in creating RFC modules in NetWeaver Developer Studio

Hi SDN,
Recently we have upgraded the portal server from EP6 SP9 to EP6 SP19. The applications which are getting data from the backend R/3 system are giving exception
 You are not authorized to logon to the target system. 
So we have now used the NWDS SP19. But we are not able to create the RFC modules as it is giving the same exception even in NWDS.
 How do I go about this???? 
regards
Brahmachaitanya C. Wajapey

Hi Bala,
The exception given is only that much.
When I try to create the RFC, a Dialog box pops up and the error given is

ERROR file opened at 20070516 111750 India Standard, SAP-REL 640,0,154 RFC-VER 3 864900 MT-SL
T:5512 Error in program 'javaw': ======> You are not authorized to logon to the target system.
T:5512 Error in program 'javaw': <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION

Please help me out.
regards
Brahmachaitanya

Problem creating JCo rfcs

Hi,
I want to create JCo rfcs in systems.
But confused between these functionalities :
1> JCo rfc prvider : This is present in Visual Admin and is used to register J2EE engine as rfc destination.
2> Maintain JCo connection : This is present in content admin in WebDynpro tool. Here we can provide details.
Whats the difference between two and which is to be used when?
Thanks

Hi,
JCo RFC Provider Service:
The RFC is an SAP interface protocol, which simplifies the programming of communication processes between systems. The RFCs enable you to call and execute predefined functions in a remote system, or in the same system. The RFCs manage the communication process, parameter transfer, and error handling.
In the J2EE Engine the RFC functions are implemented by the JCo RFC Provider service, which is used for processing ABAP to Java requests. A feature is provided for receiving calls from the SAP systems u2013 this is done by registering the J2EE Engine as a RFC destination.
The JCo RFC Provider Service processes calls from the SAP systems. It dispatches the calls to a stateless session bean, which is registered in the J2EE Engine naming system. By naming convention the JNDI name used is identical to the name of the SAP function module.
Technically, the service is based on the JCo (SAP Java Connector).
Please refer the sap help link:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/content.htm
What is JCo connection and use please refer the following URL:
http://wiki.sdn.sap.com/wiki/display/Java/JCO+Connection

Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

Problem while creating a system copy

Hi guys,
I've created a copy of my original BW system with the database copy of SQL server procedure:
1. Copy DB from "old" system and perform "post" activities (SID change, BD54 and after - BDLS -"old" logical sys. Name to "new" one..).
2. Verify RFC to ECC source system and create new RFC in ECC source system to "new" BW system.
3. Make BW logical system known to ECC source system (BD54).
4. RFC names are the same as Logical system names (both BW and ECC sides).
When I try to restore the source system connection (The original one) on the "new" BW system I get the following message:
The Connection BA is used in the PRD300YPCC. Source System as a Connection BWPCLNT550 to BW.
Do You Want to Delete this Connection in the Source System? The Connection is Restored After It Has Been Deleted Successfully.
If I answer delete - than the source system is working on the new copied BW system. But the original source system on the original BW system will have the same problem I'm having with the copied systems. This means that only one system could be connected to the ECC production on the same time.
Is there a way to make it work - i.e have both BW systems connected to the same ECC system. We want to have it done so we could upgrade one system and check it against the productive system.
Thanks alot,
Tomer Steinberg.

Still not solved.

Output XML file problem (in FILE to RFC scenario)

hi,
   my problem is that in the export parameter i have 3 variables but my output xml file shows only 2 parameters . I have checked my mapping all 3 parameters are mapped properly in output mapping .
Initially when i started the scenario there were only 2 parameters in my export list .
i completed this suuccesfully and then as per new requirement one more parameter was needed to be added i added a new parameter and reimported my rfc .
the response tab of the reimported RFC shows me the newly added parameter but my final xml file only shows me the previous 2 it doesnt show me the newly added one is there any seeting which i need to change like in idoc where we have to readd the idoc in IDX2
With regards
Bhawarlal Choudhary

Hi,
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
     The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
     The Client must be the client number of the backend SAP system.
     Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
     Double-click on the business system in the Integration Directory.
     Switch to Edit mode.
     Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
     The RFC Destination is from step 3.1.
     The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Regards
Hemant
If find helpful plz award points

Performances Problem in XI using RFC

Hi All,
I have some doubts about XI performance:
Does anybody knows if there is any
performance restrictions to do RFC calls to XI ?
What's the best performance Solution in XI ?
iDoc Adpater or RFC Adapter, File Adapter or RFC Adapter ?
Is it possible that something in Mapping
causes performance problem ?
Thanks

Hi
You need to create the Type H RFC in PI system pointing to ECC and reverse in ECC system pointing to PI.
Create the RFC and test. When you test connection it will show error because of empty message but this will work fine for the Proxy with Data.
Thanks
Gaurav

Session created by RFC Destination don't close.

Hi Experts
I create an RFC Destination in NetWeaver 7.2, and i use this destination to access some RFC from CAF project.
The problem is when i access the RFC, the ECC create a session to the user and don't close this session.
After some time i have a lot of session created in ECC. The session in ECC should be closed, because i get some error when there are a lot of session with the same user opened in ECC.
I create the destination in NWA - Destination.
Could someone help to solve this?
Regards
Marcos Brandã

Not anwsered.

Problems Displaying data from RFC on Adobe Forms

Hi,
I have some Problems with creating an Adobe Form and hope, someone can help me or give me some hinds to some tutorials, which can help me.
I'm developing an webdynpro-application which get data from a R/3 via RFC-Call.
Context-Binding and so on is done and works. I created also an interactive form and can display some datas on it.
Here my questions:
I have an field 'unit' which shoulb be displayed on several positions onto the form. My problem is, i can display it only once. If i copy the field, there is no output in it. What can i do, to solve the problem?
From the RFC i get a table with several rows of data, i want to display on the form.
With drag&drop i can place the fields onto the form but they are displayed only once. I want one line for every row from the table.
What do i have to do? Are there tutorials which show the steps?
When I am not using a form, i can display the data from RFC in a table with no problems (i create a table ui and choose create binding from context menue). Are the nescessary steps for displaying the data on an interactive form the same.
I read something about creating a dynamic form design. Do i have to create it? What are the steps i have to do.
Many questions, but i hope that someone can give me some helpful hints.
Many thanks
Mathias Lange

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Problem in creating a WebService

hi ... i am having a problem in creating a web service using netbeans .. i am using net beans 6 and glass fish v2 ... when i run the clinet appllication an exception comes that is
javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found
but i have followed right steps ... why this exception is coming ..? plz help.....

Hi
please try recreating the EJB , just check whether the home and remote interfaces and the business methods in the home and bean classes are defined properly .Also check whether the ejb editor is showing all the business methods
hope this helps ,please do ot forget to reward points
regards
rajeshkr

Problem in creating an RFC

Similar Messages

Maybe you are looking for