Problem in creating new cloud service

I have tried almost all possible combination of letters to specify URL for creating new cloud service and I am getting an error saying "This specified URL is already in use". Any help would be greatly appreciated. Thank you in advance.
Regards,
StarMogu

Hi,
What combination of letters did you try? Base on my experience, some word is in blacklist and didn't used in cloud service name. Please see this same threads(
http://social.msdn.microsoft.com/Forums/en-US/963acdd1-ee05-406b-978e-20528c7722ee/seriously-get-rid-of-the-url-name-blocking ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Unable to connect to VM's in new cloud service via express route

We have changed our express route setup, initially we had an express route via London, but we have added a second one via Amsterdam and removed the one via London. All existing and new vm's in the different vnet's have connection to our local datacenter,
but as soon as we create vm's in a new cloud service the published routes don't seem to be picked up and the machine are only reachable in their local vnet on azure.
Does anyone have an idea where to look, it looks like the route publishing does not seem to work correctly, but it is strange that new vm's in existing cloud service do work correctly. BGP peering and vnet have been provided access via the expressroute and
all have status provisioned.

Hi Syed,
When I try to connect to a new vm via rdp or try to do a tracert to the machine (with firewall turned off on the vm) I don't get a response (traffic is routed via the express-route correctly). If I do a tracert to an ip on the on premise network
from the vm in question the trace is directed to internet instead of to the on premise network via the express route.
the new cloud services were created in the same region as the working cloud services and the vm's are also in the same vnet/subnet as the working vm's. If I delete a vm (keeping the disks) from a new cloud service and redeployed it in an existing cloud service
I can reach it again via the internal ip.
We have checked the route publishing and the correct routes are published to the express route/vnet.
When I check the provisioning of the vnet's via get-azurededicatedcircuitlink all the vnet's in question are listed as provisioned.
I'll try to remove the bpgrouting for the original expressroute this evening to see if that helps.
kind regards
Xander

Error while creating new app service plan for a webapp

Greetings !
I have a new webapp created and I want to move it a separate web app service plan to apply custom domain (Not available on free tier). From the new Portal I try to create new Web App Service plan and get this error.
"Failed to create App Service plan.
Failed to create App Service plan <App Service Plan Name>. There was an error processing your request. Please try again in a few moments."
Even while creation of the web app if I select create new App Service Plan it automatically goes into Free Plan.
Please help.
Thanks Paz

Hello Parvez Alam,
The issue of not being able to create a new App Service Plan is now fixed. I tried to reproduce this and was able to create the App Service Plan Successfully.
You should now be able to create the App Service Plan from the New portal. Also, the App Service Plan concept is only availaible in the new portal and not the existing portal.
You can refer to the link below for more information on this:
http://azure.microsoft.com/en-in/documentation/articles/azure-web-sites-web-hosting-plans-in-depth-overview/
Thanks,
Syed Irfan Hussain

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Problem in creating new communication channel template in IR

Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
Mario

Hi Mario,
            This is genral problem appearing in PI 7.0 with SP12.
            Previously, i have the same problem.
            i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
            Regarding this we raise an OSS note SAP people.
            they gave the suggestion that update with SP13.
          i discuss with basis team and install the SP13.
           now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh.

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

Problem in creating a Windows Service Scheduler Agent

Hello,
I have different Listener agent created as NT Services which work fine, but for my new scheduling need I have tryed to transform them into Scheduler Agent NT Services but I'm facing error.
In the agentservice.log I obtain the following error code:
STATUS | wrapper | 2008/04/17 16:49:00 | OracleDI Agent Scheduler Agent_Gensapp12 installed.
STATUS | wrapper | 2008/04/17 16:49:19 | --> Wrapper Started as Service
STATUS | wrapper | 2008/04/17 16:49:19 | Launching a JVM...
INFO | jvm 1 | 2008/04/17 16:49:19 | Wrapper (Version 3.1.0) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2008/04/17 16:49:19 |
INFO | jvm 1 | 2008/04/17 16:49:20 | Starting Oracle Data Integrator Agent...
INFO | jvm 1 | 2008/04/17 16:49:20 | Version : 10.1.3.4.0 - 30/10/2007
INFO | jvm 1 | 2008/04/17 16:49:20 | com.sunopsis.tools.core.exception.SnpsRuntimeException: java.sql.SQLException: [GENSAPP12]Invalid object name 'SNP_CONNECT'.
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.n.a(n.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.j.f.run(f.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.i.y(i.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.i.run(i.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at java.lang.Thread.run(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | Caused by: java.sql.SQLException: [GENSAPP12]Invalid object name 'SNP_CONNECT'.
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.a.a(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.if(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.a(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.for(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.c.int(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.c.executeQuery(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.DwgObject.refresh(DwgObject.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.e.h(e.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | ... 5 more
INFO | jvm 1 | 2008/04/17 16:49:20 | Caused by:
INFO | jvm 1 | 2008/04/17 16:49:20 | java.sql.SQLException: [GENSAPP12]Invalid object name 'SNP_CONNECT'.
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.a.a(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.if(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.a(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.g.for(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.c.int(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.inet.tds.c.executeQuery(Unknown Source)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.DwgObject.refresh(DwgObject.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.e.h(e.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.n.a(n.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.j.f.run(f.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.i.y(i.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at com.sunopsis.dwg.cmd.i.run(i.java)
INFO | jvm 1 | 2008/04/17 16:49:20 | at java.lang.Thread.run(Unknown Source)
It seems to be a connexion error but I have regenerate all the repository connexion information for OdiParams.bat and nothing change.
If you have an idea I really need it.
Thanks in advance.
BM

Hi Micropole,
It may have something to do with
SNP_SECU_USER & SNP_SECU_ENCODED_PASS pointing to something other than the Master Repository schema.
Can you please double check?
thanks.

STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.

I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionInterval

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

Problem when creating CAF Entity Service finder Methods

Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]

Guys,
I have solved the problem successfully. Thanks for your attention.

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Problem in Creating New partition in Pavilion dm4 1217TX

I have a hp Pavilion dm4 1217TX model laptop. I want to partition the hard disk (640GB) to separate the OS to the data. I think this is a very basic safety feature that will save my data in case of Windows failure (which is a very common problem). I have already split the C Drive and the new condition of my hard drive is
System           199 MB       Primary
C                        70 GB       Primary
Unallocated   494 GB       Logical
Recovery           32 GB       Primary
HP Tools        103 MB      Primary
Now I can't create partition in the Unallocated space because of 4 Primary Partition it already has. Now what can I do ? I can't understand that why it comes with four Primary Partition and without any Extended partition.

Hi, there, I have the same problem with you, because of the OEM of the laptop, they have partitioned our hard drive in advanced, however this partition is not logical. As we know, when we install Windows7, the system partition and system reserved partition are set as primary partition without doubt, but how could they make the HP tools and other partition as primary partitino too. I'm very unhappy with this. I don't know WHAT are they thinking about. Every one who has a bit comptuer knowloage knows the rules of createing new partitions in Windows. In my situation, I could only copy the data on recovery to C drive, then delete it. and recreate logical partition, then copy it back. Hope this could also help you.

Problem in creating new/changing paragraph format in sapscript

hi,
i am developing new sapscript form
based on standard sapscript : SD_PICK_SINGLE .
The problem is that I neither can't create new paragraph format in se71
for this form nor change an exist paragrapf format .
does anyone encountered such a problem
and can help me solve it ?
ami

Hi,
     You have copied the Standard Sapscript, but i think you have not converted the Original Language "DE", as the standard one will be in "DE", so it is not allowing you to create new paragraph format or any changes.
      Open the copied Zform in DE language, Click on Menu> Utilities> Convert original language,
      Give From = DE
              To    = EN
Save and Open the Same Zform in EN language and do any modification.
Regards
Bala Krishna

Problem in creating new row

Hi,
I am facing a strange problem. i have created many new rows and inserted the data, but now i am facing a strange problem.
This is my requirement.
I have table with table action button as create.
when i click create it is not at all creating new row for the view object but instead it will take the row at the top of the table and replace that line with new data.
Below is the code :
In CO
In PR
if (!pageContext.isBackNavigationFired(false))
TransactionUnitHelper.startTransactionUnit(pageContext, "RVSchematicAttributeCreateTxn");
if (!pageContext.isFormSubmission())
System.out.println("control entered create block");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
System.out.println("before calling ");
am.invokeMethod("createRVSchematicAttribute",null);
System.out.println("after calling ");
else
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "RVSchematicAttributeCreateTxn", true))
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
IN PFR
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if(pageContext.getParameter("Apply")!=null)
System.out.println("apply button is clicked");
OAViewObject vo = (OAViewObject)am.findViewObject("xxczVAGCSSchematicAttributeVO1");
String schematicId = (String)vo.getCurrentRow().getAttribute("SchematicId");
String msg= "SchematicId "+schematicId+"has been added";
am.invokeMethod("apply");
System.out.println("returned back to create CO");
OAException confirmMessage = new OAException(msg,OAException.CONFIRMATION);
pageContext.putDialogMessage(confirmMessage);
pageContext.forwardImmediately("OA.jsp?page=/va/oracle/apps/xxcz/gcs/maintenance/webui/xxczVAGCSRVSchematicAttributeResultsPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
in AM
public void createRVSchematicAttribute()
System.out.println("entered createRVSchematicAttribute ");
xxczVAGCSSchematicAttributeVOImpl vo = this.getxxczVAGCSSchematicAttributeVO1();
// OAViewObject vo = (OAViewObject)this.getxxczVAGCSSchematicAttributeVO1();
vo.setMaxFetchSize(0);
vo.clearCache();
if (!vo.isPreparedForExecution())
vo.executeQuery();
/* Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
System.out.println("Row.STATUS_INITIALIZED");*/
int rowCount = vo.getRowCount();
Row row = vo.createRow();
vo.insertRowAtRangeIndex(rowCount, row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Please help me i don't know where i am going wrong. i have checked so many times but didn't find any bug.
-Mithun

Hi Zafar,
Ok i will explain my problem with an example.
I have employee table with following fields.
Empname
Empnumber
Salary
Table data
Empname EmpNumber Salary
Jack 10 1000
sam 20 2000
joe 30 3000
Above is the table structure for which i need to add another row
I have two page one results page and another create page
In Results page i will show the above table structure with table action button "Create" in order to insert new record to table.
When i click Create button it will navigate to create page
In Create page i will get the below data
Empname : Jack
Empnumber :10
Salary :1000
Instead of
Empname :
Empnumber :
Salary :
suppose now if i change the jack to jack1 , 10 to 11 , or 1000 to 10001 and click submit
Now the result page will show
Empname EmpNumber Salary
Jack1 11 1001
sam 20 2000
joe 30 3000
No fourth row is created it is actually behaving like update functionality and updating the top most row.
-Mithun

Problem in Creating new Essbase Connection in JDeveloper

I have formatted my machine and installed new JDeveloper in my machine.
I am trying to create New Essbase Connection in my JDeveloper..I am giving all the server details and I can able to test the connection and the connection test will be success. After Testing I am creating the Connection, the new connection window is getting closed but the connection is not creating/ not visible under Application Resources -> Connections.
When I try to run my old application..the old connection was working fine..I have issue in creating connection for new Applications.
Could any one of you let me know how to resolve this problem.
Thanks,
Swathi G

Thanks for the reply.. I am getting the below error when I try to create the new Essbase Connection. where this file (essbase.properties ) will be located in my machine.
WARNING: Error accessing the properties file. essbase.properties: essbase.properties (The system cannot find the file specified). Using default values
Waiting for the help..

Problem in creating new cloud service

Similar Messages

Maybe you are looking for