Problem in creating the simulation dll using SIT 2.0.3,matlab 7.1,labview 7.1

I am currently using SIT 2.0.3 ,using this toolkit i am trying to create the simulation DLL for labview.but i am getting the following error in matlab command window
Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 7
Undefined identifier ReleaseVersion
Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 25
The == and != operators can only be used to compare values of the same type
Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 26
Undefined identifier ReleaseVersion
Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 44
The == and != operators can only be used to compare values of the same type
Is this a version problem?
I am using
Simulation interface toolkit 2.0.3
Matlab 7.1.0.246(R14) Service pack
Real time workshop V.6.3
Labview 7.1
Microsoft visual C++ 6.0
Can anybody help me to solve this issue.

Hi Jayasheela,
Here are the Read Me files for different versions of Simulation Interface Toolkit. Usually, the toolkit will only work with the versions of software that are explicitly stated.
Simulation Interface Toolkit 3.0 Readme
The MathWorks, Inc. MATLAB® / Simulink® application software release 13.x or 14.0, 14.1, 14.2, 14.3
The MathWorks, Inc. Real-Time Workshop® release 13.x or 14.0. 14.1, 14.2, 14.3
Microsoft
Visual C++ 6.0. You can use Microsoft Visual C++ .NET 2003 only if you
installed the LabVIEW 7.1.1 maintenance release.
National Instruments LabVIEW Real-Time Module 7.1.x for ETS Targets.
(Optional) National Instruments LabVIEW FPGA Module 1.1.x, for customized FPGA VIs used in real-time simulations involving FPGA devices
Simulation Interface Toolkit 3.0.1 Readme
The Simulation Interface Toolkit (SIT) 3.0.1 updates SIT 3.0
to support LabVIEW 8.0, the LabVIEW 8.0 Real-Time Module, and the
LabVIEW 8.0 FPGA Module. You also can use SIT 3.0.1 with LabVIEW 7.1.x. However, you cannot install SIT 3.0.1 for both LabVIEW 8.0 and LabVIEW 7.1.x.
Simulation Interface Toolkit 3.0.2 Readme
The Simulation Interface Toolkit (SIT) 3.0.2 updates SIT 3.0.1
to support LabVIEW 8.2, the LabVIEW 8.2 Real-Time Module, and the
LabVIEW 8.2 FPGA Module. You also can use SIT 3.0.2 with LabVIEW 7.1.x or with LabVIEW 8.0.x. However, you cannot install SIT 3.0.2 for more than one version of LabVIEW on the same computer.
This maintenance release also adds support for the following products:
The MathWorks, Inc. MATLAB® / Simulink® application software R2006a.
The MathWorks, Inc. Real-Time Workshop® R2006a.
If you install SIT 3.0.2 for LabVIEW 7.1, you can use
Microsoft Visual C++ 6.0 to convert models to model DLLs. If you
install SIT 3.0.2 for LabVIEW 7.1.1, 8.0, 8.0.1, or 8.2, you can use
either Visual C++ 6.0 or Visual C++ .NET 2003.
Simulation Interface Toolkit 4.0 Readme
The MathWorks, Inc. MATLAB® / Simulink® application software release 13.x, 14.x, or 2006a, 2006b, 2007a
The MathWorks, Inc. Real-Time Workshop® release 13.x, 14.x or 2006a, 2006b, 2007a
Microsoft Visual C++ 6.0 or .NET 2003
You can also take a look at this KnowledgeBase article, which condenses some of the previous information.
MATLAB®, Real-Time Workshop®, and Simulink® are the registered trademarks of The
MathWorks, Inc. Further, other product and company names mentioned herein are
trademarks, registered trademarks, or trade names of their respective companies.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Similar Messages

Problem in Creating the Transport using Export option on Portal

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu

Problem while creating the Partner Address in CRM

Hi,
   We are facing one problem while creating the new address for the Business Partner.
   When ever customer wants to change the address : we are following one process : where we are
   using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the
corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
contains the old address number.
Because of this , we are getting lots of complaints regarding this.
Can you please help on this ASAP.
Thanks & Regards
Pradeep.

Try BAPI_BUPA_ADDRESS_CHANGE for address change followed by BAPI_TRANSACTION_COMMIT . It works.

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

Problem While creating the related entity DocFlowSet

Hi,
i am trying to create a Business Transaction and attach it to the another transaction.
I am creating the Transaction T1 using the factory methods and I am facing issues while creating the related entity DocFlowSet to attach T1 as a follow on document to T0.
i am using the model DocFlowSingle and passing the parameters like.
ObjKeyA GUID of T0
OBJTYPEA
OBJKEYB GUID of newly created transaction T1
OBJTYPEB
RELKING
RELATEDGUID: GUID of T1
RELATIONID GUID: creating a new 22 character GUID and then assigning it
But still I am not able to create the related entity. Can any one please help me in resolving this.
Thanks,
Ravi G

Resolved by self

Problem while creating table maintenance generator using two step

Hello All,
I have created a Z table in which I have 7 fields, out of which 6 are character fields and 7th field is of type INT4
Now when I create the maintenance generator using TWO STEP approach, the 7th field i.e., of type INT4 is not available in the first screen (the table control screen). This screen only has 6 fields for display.
But when I click NEW ENTRIES button, I get the next screen which has all the 7 fields.
But if I create the maintenance generator using SINGLE STEP, all 7 fields are displayed in the first screen.
Please suggest. Let me know if you require some more explaination.
Thanks & Regards,
Tarun

Hi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram

Problem to create the Account

Hi,
I have the problem to create the Account in Administration --> Admin Applets --> User Admin. As per documentation I need to add UserAccounts=true in General Configuration link in the options for <Server Name> pane. But after doing the configuration under Admin Server and restarting the server, I could not get the Predefined Accounts... option available under Security link of User Admin applet page. So I could not add the new Account.
Please let me know, how I can configure the same and add the new Account.
Thanks.

Hi
The configuration that you need to add is UseAccounts=true and not UserAccounts=true. Change it in the config.cfg file , restart the content server and then create accounts.
Thanks
Srinath

Problem in Creating the Product Using COM_PRODUCT_MAINTAIN_MULT_API

Dear CRMExperts,
I am working in SAP CRM 5.0 version.I want to create the Product Using the Function Module "COM_PRODUCT_MAINTAIN_MULT_API".For this i have gone through the SAP Note 810153.I copied the Report Program from that note and i developed the Report Program.but i am facing some problem.
The structures zinstall_info2_maint_t and zinstall_info2_maintain does not exist in SAP CRM 5.0 Version.So i am getting Short Dump.
If anyone come across the same problem.Please help me to solve this issue.Please help me it is very Urgent.
Thanks & Regards,
Ashok.

Hi,
Note 1074357 - Implementing rollback in FM COM_PROD_MATERIAL_MAINTAIN_API
Does this help you?
regards,
Murali

Problem while creating a custom document using JAVA API in the current Folder

I am trying to create an instance of a custome type from the API. I have created a custom type via XML. I have associated a JSP with the custom type thru iFS manager. This jsp provides an interface for the user to enter various data. On submit I call some other jsp also loaded into the /ifs/webui/jsps which calls a method in the java class to create an instance of the above mentioned type. This instance needs to be created in the current directory and not in the home directory of the user. I have written a java program which when run from JDeveloper connects to the repository and creates the object, but not as a foldered object. If I load this class into custom_classes directory, I get an exception. I am attaching the code also here which does the actual processing.
package cms;
import oracle.ifs.agents.common.*;
import oracle.ifs.agents.manager.*;
import oracle.ifs.agents.server.*;
import oracle.ifs.beans.*;
import oracle.ifs.common.*;
public class ContentModule extends Object {
public static final String CLASSNAME = "CONTENT";
public static final String TOPICID_ATTRIBUTE = "TOPICID";
public static final String SITEID_ATTRIBUTE = "SITEID";
LibrarySession m_session;
public ContentModule() {
connectToRepository();
createDocument("AM5","s");
public void connectToRepository(){
try{
LibraryService l_service=new LibraryService();
CleartextCredential l_credential = new CleartextCredential("system","manager");
ConnectOptions l_options=new ConnectOptions();
l_options.setServiceName("IfsDefault");
l_options.setServicePassword("ifssys");
m_session=l_service.connect(l_credential,l_options);
}catch(IfsException ex){
ex.setVerboseMessage(true);
ex.printStackTrace();
public void createDocument(String p_docName,String p_docContent){
try{
DocumentDefinition l_doc=new DocumentDefinition(m_session);
l_doc.setClassname(CLASSNAME);
long newId1=5;
long newId2=5;
FolderPathResolver l_currentPath=new FolderPathResolver(m_session);
Folder l_currentFolder=l_currentPath.getCurrentDirectory();
l_doc.setAddToFolderOption(l_currentFolder);
l_doc.setName(p_docName);
l_doc.setContent(p_docContent);
AttributeValue av1 = AttributeValue.newAttributeValue(newId1);
l_doc.setAttribute(TOPICID_ATTRIBUTE,av1);
AttributeValue av2 = AttributeValue.newAttributeValue(newId2);
l_doc.setAttribute(SITEID_ATTRIBUTE,av2);
Document l_document=(Document) m_session.createPublicObject(l_doc);
}catch(IfsException ex){
ex.setVerboseMessage(true);
ex.printStackTrace();
public static void main(String[] args) {
ContentModule contentModule = new ContentModule();
Any help will be highly appreciated.
Thanks

Please print out the Verbose Stack Trace generated when you run this application.
I suspect that you FolderPathResolver is not pointed at the directory you think it is. You might want to try printing out
I_CurrentFolder.getAnyFolderPath();
and I_CurrentFolder.getName();
null

How to create the C++ DLL for Windows Mobile and how to import it in C#

Hi All,
     Please can u guide me for creating DLL on C++ and using it in C#
     1) Steps to create the DLL using C++ for Windows Mobile
     2) And where to place the DLL after builiding to make use of it in my C# project
Thanks in Advance!!!
Thanks & Regards,
Sharan

Hello all,
I know this is an old thread but i have to give it a try ( i am stuck with an almost identical problem but cant solve it since 5 days googling and reading.
I am developing an app for Unitech HT660e which has Win CE. THe app is complete but now i need some more control over the barcode scanner. In order to gain controll i need to use USI.dll which is explained in this documentation (chapter 2 has the link to
the SDK which contains the USI.dll ) :
http://www.datacol.co.nz/pdf/uni_prog-guide_1.21.pdf
But i also get : Cant find PInvoke DLL 'USI.dll'.
In chapter 4 is SysIOAPI.DLL mentioned which i cant fin.
Chapter 17 has USICF.dll which may be interesting bcos this one can be added as reference and "using USICF" . I am using compact framework 3.5 for this and the emulator is "usa windows mobile 5.0 pocket pc r2 emulator".
Reading your post i noticed i can use the "Pocket PC 2003 SE Emulator" but it gives me the same error.
Maybe i need to include a path in my code but i tried this as well...and get the same problem. Maybe i am missing something.
Here is my code:
using USICF;
using System.Runtime.InteropServices;
namespace SmartDeviceProjectzaDLLtesting
    public partial class Form1 : Form
        [DllImport("USI.dll", EntryPoint = "VibrationOn")]   //ignorethis?:,CallingConvention=CallingConvention.Winapi)]//Cdecl)]    //EntryPoint = "VibrationOn")]
        public static extern void VibrationOn(bool bEnable);
        public Form1()
            InitializeComponent();
        private void Form1_Load(object sender, EventArgs e)
           // USICF.USIClass usiba = new USICF.USIClass(this); // this gives an exception as well
           VibrationOn(true); // thiis causes the exception
//           VibrationOn(false);

DSO activation problem after creating the secondary indexes

Hi,
I am facing the problem with DSO activation after creating the secondary indexes.
Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
As a workaround I can write a simple report which drops and creates the indexes on database level.
By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
Thanks in advance for your help.
Thanks & Regards,
Bala

hi,
in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
no need to create the indexes or delete it.
if the dso is not used for report then no need to use indexes.
Ramesh

How to create the trace file using run_report_object at runtime

Dear All
using :
Oracel Application Server 10g
Oracle Database 11g
Windows XP/sp3
I'm using run_report_object to call a report inside the form. THis report is running OK from reports builder, however it's too slow when run from Application server.
How Can I create a trace file (at runtime) that contains the time spent in sql and formating the layout of the report ??
Here is My code :
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'INVOICE.REP');
v_url :='paramform=no';
v_url := v_url||' FROM_NO=' || :PRINT_BLOCK.FROM_NO ;
v_url := v_url ||' TO_NO=' || :PRINT_BLOCK.TO_NO ||' FROM_DATE=' || v_from_date ||' TO_DATE='|| v_to_date ||' NO_DATE=' ;
v_url := v_url ||:PRINT_BLOCK.NO_DATE||' IDENT=' ||:PRINT_BLOCK.IDENT_NO||' REPORT_HEADING='''||V_REPORT_HEADING||'''' ;
v_url := v_url||' COMPANY_NO='||:global.company_no;
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,:GLOBAL.INV_REPORT_SERVER_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
IF rep_status = 'FINISHED' THEN
V1:='/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1);
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||REPORT_SERVER_NAME,'_blank');
END IF;
Thanks a lot

Slow running reports often are not the result of a flawed report, but rather a flawed configuration. For example:
1. If you call your reports (from Forms) via the default or inProcess Reports Server, often because startup time is slow, it will appear that it took too long for the report to be delievered. Using a stand-alone Rep Server is the preferred way to do this.
2. If your Forms application makes numerous calls to RRO (RUN_REPORT_OBJECT), this can tend to result in what might appear as a memory leak (although it is not). The result is delayed processing because of the excessive memory use. This problem has been overcome in Forms/Reports 11 by the use of JVM pooling. However in v10 enabling "6i compatibility" mode is the way to overcome the issue. See Note 266073.1
3. If the report runs fine from the Builder and it is connecting to the same db as when you run it from App Server, the issue is unlikely a db problem. However, if you want to look anyway, enable sqlnet tracing.
4. To enable Reports tracing and investigate other tuning options, refer to the Reports 10 documentation:
http://docs.oracle.com/cd/B14099_11/bi.1012/b14048/pbr_tune.htm
Almost forgot to mentioned this one....
If you are using a v11 db with App Server 10, you will probably want to consider reviewing Note 1099035.1 as it discusses an issue related to performance with such a configuration.
Edited by: Michael Ferrante on Apr 10, 2012 8:49 AM

Problem in Changing the Service Order Using BAPI_ALM_ORDER_MAINTAIN

Hi ABAPers,
I want to change the Service order(TCODE-IW32) Using BAPI_ALM_ORDER_MAINTAIN.But i don't know what are all the
Parameters needs to be passed.I want to chnage the COMPONENT of the Service Order.Please anyone tell me what all are the
mandatory parameters should be passed to change the COMPONENT of the Service Order.If anyone has the code Please send me.
It is very Urgent Kindly help me to Solve this problem.
Regards,
Ashok.

Hi Ashok,
i am sending u the sample eg thread for bapi create i thnk u can find out the mandatory fields frm tht ...
check this link though it is for create the mandatory fields and structure will be same .
Create Order BAPI
regards
Sana M.
reward for useful answers..

When I export a AAF file from Protools 9 and Import the file into Logic ProX the drum track is out of sync. I created the drum loop using NI Maschine. Has anyone else seem this??

When I export an AAF file/project from Protools 9 using an external drive and import the AAF into Logice Pro X the drum track does not play correctly. It is out of sync with the rest of the track. I created the drum loop as a plugin using Native Instruments Maschine. Has anyone else had this problem?? Also how would I go about exporting the midi tracks from the Protools session. The midi track does not show when the file is imported to Logic Pro X. The midi data should export with the AAF file correct??

Are you using any plugins in Logic?
In Preferences/Audio under the General tab, how do you have the plug-in-latency compensation set?

Problem in creating the simulation dll using SIT 2.0.3,matlab 7.1,labview 7.1

Similar Messages

Maybe you are looking for