HP LaserJet 500 support on HOST-RESOURCES-MIB

Hi,
We've various HP printer install in our campus. I've tried to enable snmp in one of the HP printer ( e.g. HP LaserJet 500 color M551). Our goal for the HP printer is to have them response the SNMP "hrDeviceDescr" under the HOST-RESOURCES-MIB when our SNMP manager device send a SNMP request to the HP printer. I've make sure our query manager device and the HP printer has the same community string running the same snmp v2. My question is does the HP LaserJet 500 color M551 support HOST-RESOURCES-MIB and how do I turn it on?
Thanks,
Jason

@jmui
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

LaserJet 500 color MFP M575 ePrint

I have enable ePrint on my new HP LaserJet 500 color MFP M575 when I first got it. A lot of changes to the configuration has now been done and ePrint does not work anymore.
I tried to reset it, disabling and re-enabling HP Web Services on the embedded web server, but the tab for "HP Web Services" does not ever come back even after a reboot. I also disabled the Web Services, rebooted and re-enable them and rebooted again, that also did not bring back the "HP Web Services" tab.
Because the tab never comes back I can't get the new code for the printer.
I have the only firmware available for that printer, the one dated the 12th of April 2012.
I really don't know what to do now.

Hello BMagny,
It sounds like you may need to preform a semi-full reset on the printer. I cannot give you instructions on how to do this over the forums, instead you will need to contact tech support directly. You can find the number here.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Update ip address, HP LaserJet 500 color MFP M570 PCL 6

Hello,
I am having an issue with my HP LaserJet 500 color MFP M570 PCL 6 printer. The error message i am receiving, while trying to scan, says I need to update my ip address. How do i do this?

@cuellorojo
Thank you for using HP Support Forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

"Filter failed" in CUPS when using IPP (HP LaserJet 500 color M551)

I have two ArchLinux machines, one with HP LaserJet 500 color M551 connected over USB and another one on the same network. Printing over network (ipp) doesn't work: CUPS on the client says "Filter failed", so the job doesn't even reach the server. Printing directly from the server works perfectly fine, there's no "Filter failed" message and it just prints.
Both machines have the same ArchLinux installation, they are both x86_64, they have hpijs installed and the same PPD selected. This WiKi entry didn't help and the printer differs from the one discussed here, so it doesn't seem to be a well-known issue. :-(
I tried to reinstall the printer on the client many times, using both DNSSD and direct URI input. All this seems to work fine. The filter that fails is probably /usr/lib/cups/filter/hpps, but I have no idea how to get debugging info from it, i.e., why it fails etc. The same filter works just fine on the server.
I thought this might have something to do with the distinction between PostScript and the HP PCL variants. Enabling Adobe TBCP should fix this by adding the appropriate binary metadata and escaping things as needed... However, switching TBCP on in the CUPS printer settings stopped the printer from working. The printer appeared to be OK and responsive, but simply didn't print anything. Disabling TBCP fixed this on the server, but the client shows the "Filter failed" message, no matter what's happening on the server.

I have similar problems with network printing (from various 32-bit and 64-bit Arch systems) producing 'Filter failed' messages, while directly printing from the CUPS server - with USB connection to the device - works as expected. My all-in-one device is an HP Photosmart C4480 and everything worked fine a few weeks ago. (Ironically, I can get network scanning using Xsane!) I've tried reinstalling, and various drivers to no avail.
It's very frustrating, and I think I've tried everything suggested in the Wiki.
Added later, after setting 'LogLevel debug' in cupsd.conf:
D [21/Aug/2013:22:19:57 +0100] [Job 18] Adding start banner page "none".
D [21/Aug/2013:22:19:57 +0100] [Job 18] Queued on "hpc4480" by "anonymous".
D [21/Aug/2013:22:19:57 +0100] [Job 18] File of type application/vnd.cups-raster queued by "anonymous".
D [21/Aug/2013:22:19:57 +0100] [Job 18] Adding end banner page "none".
D [21/Aug/2013:22:19:57 +0100] [Job 18] time-at-processing=1377119997
D [21/Aug/2013:22:19:57 +0100] [Job 18] 1 filters for job:
D [21/Aug/2013:22:19:57 +0100] [Job 18] hpcups (application/vnd.cups-raster to printer/hpc4480, cost 0)
D [21/Aug/2013:22:19:57 +0100] [Job 18] job-sheets=none,none
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[0]="hpc4480"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[1]="18"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[2]="anonymous"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[3]="Test Page"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[4]="1"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[5]="job-uuid=urn:uuid:febcff1d-2cc5-3058-4c2f-c420e625e3ec job-originating-host-name=192.168.1.11 time-at-creation=1377119989 time-at-processing=1377119997"
D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[6]="/var/spool/cups/d00018-001"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[7]="CUPS_STATEDIR=/run/cups"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[8]="HOME=/var/spool/cups/tmp"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[10]="[email protected]"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[11]="SOFTWARE=CUPS/1.6.3"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[13]="USER=root"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[14]="CUPS_MAX_MESSAGE=2047"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[17]="IPP_PORT=631"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[18]="CHARSET=utf-8"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[19]="LANG=en_GB.UTF-8"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[20]="PPD=/etc/cups/ppd/hpc4480.ppd"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[21]="RIP_MAX_CACHE=128m"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[22]="CONTENT_TYPE=application/vnd.cups-raster"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[23]="DEVICE_URI=hp:/usb/Photosmart_C4400_series?serial=MY842FM2150557"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[24]="PRINTER_INFO=HP Photosmart C4480"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[25]="PRINTER_LOCATION=ninian"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[26]="PRINTER=hpc4480"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[27]="PRINTER_STATE_REASONS=none"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[28]="CUPS_FILETYPE=document"
D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[29]="AUTH_I****"
D [21/Aug/2013:22:19:57 +0100] [Job 18] Started filter /usr/lib/cups/filter/hpcups (PID 8978)
D [21/Aug/2013:22:19:57 +0100] [Job 18] Started backend /usr/lib/cups/backend/hp (PID 8979)
D [21/Aug/2013:22:19:57 +0100] [Job 18] prnt/hpcups/HPCupsFilter.cpp 548: cupsRasterOpen failed, fd = 5
D [21/Aug/2013:22:19:57 +0100] [Job 18] PID 8978 (/usr/lib/cups/filter/hpcups) stopped with status 1.
D [21/Aug/2013:22:19:57 +0100] [Job 18] Hint: Try setting the LogLevel to "debug" to find out more.
D [21/Aug/2013:22:19:57 +0100] [Job 18] prnt/backend/hp.c 839: ERROR: null print job total=0
D [21/Aug/2013:22:19:57 +0100] [Job 18] PID 8979 (/usr/lib/cups/backend/hp) exited with no errors.
D [21/Aug/2013:22:19:57 +0100] [Job 18] End of messages
D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state=3(idle)
D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state-message="Filter failed"
D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state-reasons=none
Crucial error seems to be: prnt/hpcups/HPCupsFilter.cpp 548: cupsRasterOpen failed, fd = 5
Last edited by ninian (2013-08-21 21:28:58)

I cannot print single checks with my brand new HP Laserjet 500. Full page checks OK.

Win 7, Quicken 2012R5, HP Color Laserjet 500. I can print full page of check fine. A single check prints by starting at the middle of the check, not at the end. Checks are inserted end-wise into the manual feed drop down. Quicken says it is an HP Printer problem. The Quicken "adjust" method only allows for movement of the printing by a few hundredths of an inch. I need to move the print several inches. Appreciate any help you can offer. I tried HP support and was told to telephone, then got stuck forever on the que.......
Aloha,
Gene

I can understand the frustration both of you have experienced.
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Zone Cluster: Creating a logical host resource fails

Hi All,
I am trybing to create a logical host resource with two logical addresses to be part of the resource, however, the command is failing. Here is what I run to create the resource:
clrslh create -Z pgsql-production -g pgsql-rg -h pgprddb-prod,pgprddb-voip pgsql-halh-rs
And I am presented with this failure:
clrslh: specified hostname(s) cannot be hosted by any adapter on bfieprddb01
clrslh: Hostname(s): pgprddb-prod pgprddb-voip
I have pgprddb-prod and pgprddb-voip defined in the /etc/hosts files on the 2 global cluster nodes and also within the two zones in the zone cluster.
I have also modified the zone cluster configuration as described in the following thread:
http://forums.sun.com/thread.jspa?threadID=5420128
This is what I have done to the zone cluster:
clzc configure pgsql-production
clzc:pgsql-production> add net
clzc:pgsql-production:net> set address=pgprddb-prod
clzc:pgsql-production:net> end
clzc:pgsql-production> add net
clzc:pgsql-production:net> set address=pgprddb-voip
clzc:pgsql-production:net> end
clzc:pgsql-production> verify
clzc:pgsql-production> commit
clzc:pgsql-production> quit
Am I missing something here, help please :)
I did read a blog post mentioning that the logical host resource is not supported with exclusive-ip zones at the moment, but I have checked my configuration and I am running with ip-type=shared.
Any suggestions would be greatly appreciated.
Thanks

I managed to fix the issue, I got the hint from the following thread:
http://72.5.124.102/thread.jspa?threadID=5432115&tstart=15
Turns out that you can only define more than one logical host if they all reside on the same subnet. I therefor had to create 2 logical host resources for each subnet by doing the following in the global zone:
clrslh create -g pgsql-rg -Z pgsql-production -h pgprddb-prod pgsql-halh-prod-rs
clrslh create -g pgsql-rg -Z pgsql-production -h pgprddb-voip pgsql-halh-voip-rs
Thanks for reading :)

Logical host resource in SC3.2 missing IPMP

I was under the impression that when creating a logical host resource in Solaris Cluster 3.2, that it will read the hosts and hostname.* files to get the IPMP info and do this automatically for you. I am not seeing this behavior and am hoping someone can shed some light on this for me. Here is the relevant data, any help is greatly appreciated. If it matters, this is Solaris Cluster 3.2 on Solaris 10, running in a 25k domain.
# grep cluster1vip hosts
10.230.108.28 cluster1vip cluster1vip.example.com
10.230.108.29 cluster1vip-ce1 #ipmp_test_cluster1vip1
10.230.108.30 cluster1vip-ce5 #ipmp_test_cluster1vip2
# cat hostname.ce1
cluster1vip netmask + broadcast + group ipmp_sc1 up \
addif cluster1vip-ce1 deprecated -failover netmask + up
# cat hostname.ce5
cluster1vip-ce5 deprecated -failover netmask + broadcast + group ipmp_sc1 up
When I bring the resource online, these are the settings that get applied:
ce6:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 3
inet 10.230.108.28 netmask ffffff80 broadcast 10.230.108.127
Again, any help or guidance is greatly appreciated.

For probe based IPMP the following has always worked for me:
- IPMP interfaces of same media type
- SPARC needs local-mac-address set to true in OBP
- Supported interface (if using probe method - [http://docs.sun.com/app/docs/doc/816-4554/mpoverview?a=view|http://docs.sun.com/app/docs/doc/816-4554/mpoverview?a=view] )
/etc/hosts
192.168.1.1 hawkeye
192.168.1.2 ipmp-test1
192.168.1.3 ipmp-test2
For the cluster node 'hawkeye'
/etc/hostname.ce0 before the IPMP change:
hawkeye group sc_ipmp0 -failover
/etc/hostname.ce0 after the IPMP change:
hawkeye group sc_ipmp- failover up addif ipmp-test1 -failover deprecated up
/etc/hostname.ce.1
group sc_ipmp0 failover up addif ipmp-test2 -failover deprecated up
Reboot cluster node and you should be good to go.

Can't Create Service Due to Insufficient Host Resources?

I have created a simple, single-tier Service Template. If I now create a Service from this Service Template, I get an error 23737. ("The
deployment configuration for VM with name %Name; cannot be placed on the host group or cloud that it targets. More detailed information can be found by getting star ratings for the target host group or cloud.Ensure
that sufficient host resources are available on the host group or cloud that this virtual machine configuration targets by resolving any issues found while rating the virtual machine and try the operation again.")
My Cloud's capacity is set to all unlimited. The hosts (it's a three-host cluster) have some virtual machines running but I don't think they're overcommited.
What could be the problem here?
Thanks in advance!

Here is the step by step.
select template
configure deployment
Name and target Host Group
Complete Settings
Refresh Preview
Select individual VM of Service (not the tier, but the VM within the tier).
Select the Ratings button in the ribbon (step 6 lights this up).
Note the Rating Explanation tab
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Thanks so much for breaking it down for me!
Now I get "The host does not support guest IP change detection and dynamic Network Virtualization policies."
Is that because it's Windows 2008? You wish you knew that from the start, right? :D

Unable to uninstall HP laserjet 500 colour MFP M570

Hi,
I installed the HP laserjet 500 colour MFP M570 software. I now need to uninstall it but it does not seem to work.
I have tried to uninstall the software by going through the control panel "uninstall programs" - when I click uninstall, nothing happens. I have followed the route by clicking the windows start button, then "all programs", then "HP" then "HP laserjet 500 colour MFP M570" and finally "uninstall product sotfware" ... nothing happens though?
Please assist.
Kind regards,
Justin

Hi J_man,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How to check HP LaserJet 500 color M551 job log

Hi Everyone
I have a new HP LaserJet 500 color M551 set for users, after user print a document to the printer, I want to know how many sheet it used. In the job log page I can only find who print it, output size, black or color... But I can't check how many sheet the print job used. Is there nay method to check it?

Thanks for the reply
I had try the method but it still can't get the info. what I want get is how many sheet(s) the print job used but it didn't show in the job log page. the print job only show following info:

Connect HP Printer (Laserjet 500 color M551), to 2 wireless networks.

Hi everyone,
I am trying to connect the formentioned printer(*) to 2 wifi's we have in work. Let's say WNet1 & Wnet2.
So that everyone connected in those 2 Wireless Networks, can print.
(Details: the printer is already set up for WNet1, and is working fine. But half of us can't connect to WNet1, so we have WNet2 for that reason. The printer is "in range" for both WNetworks, that will not be an issue )
(*): Laserjet 500 color M551

Hi SMARTYN89,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this by clicking here.
I hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Is there a way to change the default print tray on an HP LaserJet 500 color M551 Printer

Hi
Is there a way to setup the default print tray for a HP LaserJet 500 color M551 printer to be tray 2 printing both online and direct?
If so what would be the best way to go about implementing it?
Thanks
This question was solved.
View Solution.

Usually, you can change the default paper trays through the control panel and through the Embedded Web server (EWS).
Check the settings on your control panel. Here is a link to the User Guide, check out page 94 and see if that helps you out.
m551 User Guide
For the EWS, put the printer IP address into your browser, then go to the tab that would list tray settings. Not sure exactly which tab has it for this printer series, but on other printer series it is on the system tab under paper setup.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP LaserJet 500 color M551 security

Hi All, I have several
HP LaserJet 500 color M551 to which I want to limit who can print to the device, based on IP and CIDR notation.
There is a crazy number or options in this thing, and I am finding it dificult to set this up.
Basicaly, I want to allow 192.168.2.0/24 an 10.10.10.0/24 with subnets 255.255.255.0
And exclude all others. How do I set that up?

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP LaserJet 500 color M551

Hi All, I have several
HP LaserJet 500 color M551 to which I want to limit who can print to the device, based on IP and CIDR notation.
There is a crazy number or options in this thing, and I am finding it dificult to set this up.
Basicaly, I want to allow 192.168.2.0/24 an 10.10.10.0/24 with subnets 255.255.255.0
And exclude all others. How do I set that up?
when I try to set it up in the acl config pag, I get this:

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar logical host resource configured on 2 different resource groups

hi,
I had an issue with logical host setup as follows.
Background
We had a failover resource group RGA which is running a critical Oracle instance and listener process.
It has a logical host resource ora-lh-rs configured with logical host pointing to VirtualHostA.
I need to create another failover resource group called RGB with another Oracle instance.
Now at present this Oracle instance (Not under cluster control yet) is listening to the same logical host - VirtualHostA as RGA.
When I create this new resource group RGB, I need to configure it to share the same logical host as RGA.
The problem is if I need to add the logical host resource ora-lh-rs with VirtualHostA to this RGB, I foresee that there will be an IP address conflict if I failover RGB to the other cluster node (If my guess is wrong, but logically there should be an IP address conflict if SUN Cluster does not block me from adding the same logical host resource to RGB).
Question
Is there any other way to overcome this issue other than to configure the second Oracle instance to listen on a different logical IP?
To add, RGB is a less priority Oracle instance and will always need to be with RGA on the same node.
Any suggestions are welcome. My apology if this question sounds stupid as I do not have an UAT environment to test.
Thanks
ldd76

HI Tim,
Thanks very much for your kind advice. I must say that I have very little experience with SUN Cluster so I beg your pardon if my concept is too superficial.
The reason why I cannot put both Oracle instance in the same RG is because that' s my boss initial proposal. I will speak to her again on the log_only option.
But can I confirm that the command looks like this after I add the resources to RGA.
scrgadm -cj rgb-ora-rs -y Failover_mode=LOG_ONLY (Oracle server)
scrgadm -cj rgb-lsn-rs -y Failover_mode=LOG_ONLY (Oracle Listener)
scrgadm -cj rgb-hasp-rs -y Failover_mode=LOG_ONLY (HA Storage Plus)
As for the logical host questions, it has been legacy that both the Oracle instance listens on the same logical IP(Just that the new and less critical Oracle instance is not under cluster control yet)
But my gut feel for the reason behind this is that the less important Oracle instance is always running on the same node where RGA is running (since that Oracle instance is used for data warehousing with data replicated from the more critical Oracle instance only) else it is meaningless. Thats my guess why ony one logical IP is used.
If the direction is still to use RG_affinities, then if I tweak the following steps a bit will it work?
1) Create RGB.
2) Activate RGB - scswitch -Z -g RGB
3) Offline RGB - scswitch -F -g RGB
4) Failover RGA to the other node
5) Failover RGB to the other node
6) Offline RGB on the other node
7) Failover RGA back to the original node
8) Failover RGB back to the original node
Thanks.

HP LaserJet 500 support on HOST-RESOURCES-MIB

Similar Messages

Maybe you are looking for