Problem in creation of system alias for bw system

Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PM

Hi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.

Similar Messages

About System alias for system object

Can any one tell me exact need for system alias for system object when we are integrating SAP TCODES

The main use of System alias is to identify the uniqueness of the systems that exist in the portal
also it is very easy to transport TCode iviews from one landscape to other if you have same system alias exist in all the landscapes
Raghu

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

How to use a portal defined alias for a system

Hello,
we have in the portal Netweaver 2004s, sp11, defined systems, which contain SAP-Routerstrings. For Everey System we have given a Systemalias.
No we want to use the Systemalias managed by the portal use in our Java-Applivcation deployed on the portal-server.
How to to this?
Best regards
Oliver Prodinger

Oliver,
From whatever I could understand from your question I would answer that in this way. You need to create a iView out of the application. It will ask for a System parameter. One needs to provide the system alias name into the System paramter.
If this does not answer your query, plz elaborate your question.
Warm regards,
Sukanta

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Rule based monitors (RZ20) - Show system availability for selected systems

Hi experts,
I'm new with CCMS monitoring and need an advice for rule based monitors.
I want to create three alert monitors (RZ20). One for our developing systems, one for our quality assurance systems and one to monitor our production systems.
For the start, I want to show data in each of this monitor for free space of the filesytems (MTE class: "FilesystemFreeSpace"), for users which are locked out (MTE class "R3SyslogSecurity") and for the availabilty of the ABAP systems (MTE class "Availability_SysPercent_ABAP").
I started to create the monitor for our developing system and got a problem. I started with the rule "CCMS_DEFINE_R3_SYSTEMS" to select our developing systems "HRT", "CRT" and so on. Under this nodes, I defined the mte classes ("CCMS_GET_MTE_BY_CLASS") which needs to be shown: "FilesystemFreeSpace", "R3SyslogSecurity" and "Availability_SysPercent_ABAP".
When I checked the results, I was able to see the free space of the filesystems and whether a user has been locked out. Unfortunately, I recognized that the availability is not shown. Instead there is the message "No MTEs currently available".
I'm aware, the availability cannot be shown on this way, since the agents are part of the central monitoring system and hence i need to choose the central system for "CCMS_DEFINE_R3_SYSTEMS". However I'd like to show the availability separated for each system under "HRT", "CRT" and so on. That means for example, there should me a node "HRT", which contains the free space of the filesystems, whether users are locked out, and the availability for the system.
It's not a problem to get a solution with a static monitor. I simply create a virtual node "HRT" and tick the checkbox under "<central system>, ..., <availability>, <hrt> ..."
However, I'd like to use rule based monitor to keep the effort at a minimum by not ticking thousand of check-boxes when I expand the monitored objects.
I also tried to use the rule "CCMS_GET_AVAILABILITY_FOR_SYSTEM", but it doesn't work and SAP documentations say "This rule is reserved by SAP for later use".
Does anybody know a solution for my problem?
In addition, I've got one more question concerning rule based monitors: If I want to create a monitor for my developing systems, I'll not be able to choose "<all>" for "CCMS_DEFINE_R3_SYSTEMS". Do I need to create "CCMS_DEFINE_R3_SYSTEMS" for each system separately? Or is there another possible way?
Thanks for your help in advance.
Bob
Edited by: Bob Norwich on Oct 17, 2010 12:04 PM
I read something about logical MTE classes: http://help.sap.com/saphelp_nw04s/helpdata/en/31/5462405c910272e10000000a155106/frameset.htm --> Does I need to use this?

Sorry Sean for my very late anwser.
I was very busy in my company.
Yes, I had tried you suggestion but it didn't work for me.
The problem is, that the Agent "CCMSPING" is part of the central monitoring system by definition.
Furthermore I tried to copy the default availabiliy monitor to look how it is definied. It didn't help.
I made the decision to define my monitor differently (an extra monitor for the availability for all system) and replace this temporalily solution when ""CCMS_GET_AVAILABILITY_FOR_SYSTEM" will be available.
The situation is not so bad after all.
Thx for your help. I appreciate it!!
Bob

System requirement for Hyperion System 9.3.1

What is the System requirements for installing Hyperion System 9.3.1.Thanks
in advance.

More specifically, the system requirements can be found in the 'Install Start Here' guide at http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf.
Tim Tow
Applied OLAP, Inc

System type for technical system.

Hi All,
I want to create a new technical system for my receiver sys. The receiver is the PI .
so its SAP->XI->XI Interface.
Can anybady explain what will be the System Type for receiver PI.(web as abap or ...etc)
Also pls explain the diffrent system types.

Hi,
Technical system for PI is of type Web As ABAP (because PI is also a product of SAP)
Other technical system types:
Web as ABAP -
> For SAP applications.
Web as JAVA -
> Web AS Java systems consist of one or more instances and each instance is installed
on a separate host. An instance itself consists of cluster nodes that can
communicate with each other.For Enterprise java applications on J2EE stack.
Third party -
> For People soft, BAAN, JDEdwords, ...........
Regards
Ramesh

Problem with Creation of Source module for MS Access

I am having a problem in creating a source module connected with an "MS Access" file in OWB 9i using the heterogeneous services. I have created a DSN to an access file (.mdb) and created the HS in Oracle (modified the tsnames.ora and listener.ora files with required details). Created a Database link using this service and it's working fine in SQL PLUS, but I am unable to create a Source module in OWB 9i using this db link, since OWB 9i need a schema name for db link. In MS access it's not possible to have a schema.
Please help me in solving the above issue.
Thanks in advance
Jagan

What version of OWB and Oracle database are you using? If it is an OWB version 9.0.4 or higher, I presume you are trying to create a non Oracle source module under the Oracle Database node - is this the case? If yes, you should not do that, but create your MS Access module under Databases->Other->Other node (as I understand you are not using ODBC). Let me know if my assumptions are correct.
Regards:
Igor

Scratch install vs. system restore for HA system

Hi All,
We are planning for a Mimix High Availability install and would like to know whether our initial install of the HA systems (R/3 in one LPAR and CRM/BW in another LPAR) should be full DR type restore or a new install of R/3, CRM, and BW. Lakeview has recommended a scratch install and we have a vague memory that change the server name on an already installed SAP system can cause problems. What type of install did you perform during your initial setup of the HA systems? Did you load your production database on the HA systems during the initial install or wait until you were ready to start replication?
TIA,
Stan

Hi Stan,
as Mimix "only" replicates the DB, a few libs and the IFS (or even not) and nothing of the rest of the system, I would not go for a full scratch install. I would start with a homogenious systemcopy with special things in it - e.g. my "easy homo copy" and then you need to discuss how you want to start the server with what IP names etc.
Most likely you want to switch host names - at least the logical hostname. So, the SAP profiles need to be adjusted.
But, I don't see any benefit (except additional effort) from a scratch install.
(you should ensure, that the GIDs and UIDs of the users are the same - this makes IFS easier)
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Services to be checked after system restart for getting system status

Hi,
We are trying to identify all the services that are to be checked before we confirm that a system is available.
While performing a system status check on J2EE instances after restart of the system , after getting a respone on TELNET to the HTTP Port sometimes the system was found to be not completely up.
We have observed that though the server processes are down HTTP service responds to user requests.
Could you please help identify the other services which must also be checked to be completely sure that the system is UP ?
We have gone through the document "TCP/IP Ports Used by SAP Applications" in SDN.
But It doesn't talk about the ports to check for Java server processes.
For ABAP we do a telnet on Message server and so far we got it right.
Should we check on other services as well in ABAP stack systems to confirm on their availability?
Thanks
Prateek
Edited by: Prateek Gupta on Dec 5, 2011 8:32 AM
Edited by: Prateek Gupta on Dec 5, 2011 8:48 AM

Hi Prateek,
Please use below command to check if JAVA Stack/Instance is UP and Running or not.
jcmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
Then goto option 20 and you can find there Dispatcher, Server0 and SDM are UP and Running or not.
If everything is Up and Running, then you can goto your browser and paste there:
http://Hostname:5<XX>00
where <XX> is the System Number where your Java enginee/Stack is present.
In order to check ABAP Enginee is Up or not, you can check like this:
dpmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
it will show your work process are running or not.

License Audit and System Measurement for J2EE Systems

Hello,
I'm working on our annual license audit at this time, and for the first time the measurement plan includes non-ABAP systems: Enterprise Portal, Adobe Document Services, NWDI, and even the Java developers' NWDS installations. I'm fully conversant with the use of USMM and SLAW on the ABAP side, but I have no idea how to measure the J2EE systems, and I am unable to find any documentation on this. I did find one powerpoint presentation that talked about measuring Portal and Duet systems, but it's only valid for 6.40-based systems, and we are a 7.00 shop (NetWeaver 2004s). In any case, when I tried the suggestion in the presentation, it simply didn't exist for our Portal or ADS systems on 7.00.
Does anyone have any suggestions for how to proceed?
Thanks,
--Matt

Hi,
Can you please let me know the procedure for SAP license audit.
what is the use of program ZTUTYP_UPD.
Thanks in advance

Logical System Change for Production System

Hi experts
We have new CRM and BI project. Logical System name of our ERP production system is not in naming standart. So we want to change logical system name and run BDLS in production system.
Is there any risk about this prosedure?
Best Regards...

Hi,
It is not advisable to change the logical system in production client once its assigned.
Regards,
Nisit

System and System Alias Creation

Hi all,
we have developed iViews in EP5. Now we want to migrate all our iViews to Ep6.. we have problem in EP6 for system and system alias creation..
in EP5 we have 2 files called System.xml for defining the system and JCODestination.xml..
after creating systems in System.xml.. we will define all system properties in like router string ,client no,and system number for each sap system in JCODestination.xml ..
and these systems we will map to the user in which will come all the defined Systems to combo box
and we will define the systems in default.properties file and we will use in the par development...
I heared that there are no System.xml and JCODestination.xml files in EP6 Netweaver Component....
can you please any one advise me how to get configured System and System Alias in EP6 NetWever... and how to call in coding...
I need a detailed steps how to create SAP System Alias.. since i am connecting to SAP System and Calling Function Modules and BAPIS From My Application(iViews).....
I need a Detailed Explaination Step by Step Explanation ..
your help will be required for me.. and appreciated to the great extent......
Thanks and Regards
Prasad.Y

After following the steps above in system landscape
please do the following to fill in the parameters
Select connector under the property category.
PlZ make sure that you have provided ApplicationHost(the host name of backend system), LogicalSystemName(can be found from transaction scc4,just dounle click on the client to see the logical name use saplogon and logon to the backend system R3 in this case) ,SAP Client(can be found from transaction code scc4), SAP SystenID,SAP System Number and Server port.
After that create a System Alias for that system by selecting System Aliases under display.( This is important. I had the same kind of problem this should slove it).
Now make sure that you have user mapping set for the backend R3 System(User Administration-->User Maping search for the user and choose edit. Then choose the system alias name form the drop down box and provide the login details for the backend system).
Try to test the connection by selecting connection tests under display. If it doesnot work plz copy paste the whole error message.
The message should look something like the one below
Test Connection with Connector - Jan 1, 1970 2:35:42 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Let me know if you need any more details
- Sheshu

Problem in creation of system alias for bw system

Similar Messages

Maybe you are looking for