Problem in creation of User while validating accountId

Hi all,
Im creating an accountId based on the Firstname and Lastname of an employee in a form. A rule has been written for the creation of accountid based on the combination of First & Last names, which is placed in the Expansion tag of the accountId field. The accounted is in hidden format and the Rule works fine.
The Page gets refreshed when the Lastname is entered & the accounted gets calculated.
When some invalid characters are placed in the names a validation error shows up. But the accounted gets calculated with those junk characters and stores in Idm . How can I avoid those junk values in the accountId field?
Can any one help me with this issue?

Case closed . My issue has been resolved

Similar Messages

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Custom error messages on while validating User profile

Hi,
I have developed a valadation handler to validate data of a user while creating/updating.
If any of the attribute valation failed then my ValidationFailedException is getting triggered but it is showing my custom message on the server logs and on UI console i am getting "Server error occured" message. It is not display my custom errror message on the ui console.
Please let me know the steps to perform to show my custom error messages on ui console.
Below are the steps I followed.
1) Develeped a class which implements ValidationHandler.
2) Imported plugin into MDS database
3) Imported EventHandler xml into MDS database.

{thread:id=2256511}
-Bikash

Problem with computing Font width while printing in Landscape mode

I have an application which prints a table and fills it with some text. I render it on a JComponent using the drawString(theStr, xPos, yPos) and the drawLine(rigtX, topY, rigtX, botY) methods in Graphics2D object. I want to take print-out of the table and also store the image of the table in, say, jpeg format. The print can be in Landscape or Portrait format depending on the size of the JComponent, which the user sets depending on the table size and the font size.
I have a paintTable( ) method which contains all the drawString( ) and drawLine( ) methods. This method is called from the paint( ) method of the JComponent to achieve normal rendering. The same method is called to get a BufferedImage of the Table. The same method is further called from the implementation of print( ) method from the Printable interface.
In the paintTable( ) method, I compute the pixel coordinates of the table grid lines and the texts positions in the tables depending on the font width and height obtained as shown below:
        // Set the Font
        Font theFont = graphics.getFont();
        theFont = theFont.deriveFont((float)TableFontSize); // TableFontSize is an int of value 8,9,10 etc.
        graphics.setFont(theFont);
        // Get the Font Size
        FontRenderContext frc = graphics.getFontRenderContext();
        float width = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).width;
        float height = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).height;
       System.out.println("FONT WIDTH HEIGHT [" + width + "," + height + "] ");I am getting the following value of width and height when the above print statement is executed with a value of 9 for TableFontSize. FONT WIDTH HEIGHT [18.0,11.3203125]
The problem I face is :
While Printing in Landscape mode the value of the 'width' variable printed as given above is becoming negative. Kindly see the values: FONT WIDTH HEIGHT [-9.37793,11.3203125]. This is happening ONLY DURING PRINTING IN LANDSCAPE MODE. This makes my calculation of table grid line coordinates and text positions completely wrong and the table goes out of place.
Kindly note that, there is no problem during normal rendering and BuffereredImage creation and also while printing in Portrait mode. The problem happens irrespective of Linux or Windows. The value of 'height' is always correct.
Kindly let me know: If the method I use to get the 'width' and 'height' is correct ? Is there any better way which will work fine in all platforms under all circumstances.
Kindly help me to sort out this issue.
Thanks a lot in advance and best regards
-acj123

I have extracted the relevent code and made a stand alone program.
The complete code is enclosed; including that for printing.
Kindly go through the same and help me to solve this problem.
Thanks again and regards
-acj123
import java.awt.*;
import java.util.*;
import java.awt.geom.*;
import java.awt.event.*;
import java.awt.print.*;
import java.awt.print.PrinterJob;
import java.awt.font.FontRenderContext;
import java.awt.image.BufferedImage;
import javax.swing.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
public class MyCanvas extends JComponent implements Printable, ActionListener
    int TableFontSize = 9;
    private Graphics2D graphics;
    public MyCanvas(JFrame frame)
        frame.getContentPane().setLayout(new BorderLayout());
        frame.getContentPane().add(this, BorderLayout.CENTER);
        frame.setJMenuBar(createMenuBar());
    public JMenuBar createMenuBar()
        JMenuBar menubar = new JMenuBar();
        JButton printButton = new JButton("Print");
        menubar.add(printButton);
        printButton.addActionListener(this);
        JButton imageButton = new JButton("Image");
        menubar.add(imageButton);
        imageButton.addActionListener(this);
        JButton drawButton = new JButton("Draw");
        menubar.add(drawButton);
        drawButton.addActionListener(this);
        JButton closeButton = new JButton("Close");
        menubar.add(closeButton);
        closeButton.addActionListener(this);
        return menubar;
    public void actionPerformed(ActionEvent evt)
        String source = evt.getActionCommand();
        if (source.equals("Close"))
            System.exit(0);
        if (source.equals("Image"))
            getImage();
            return;
        if (source.equals("Print"))
            printCanvas();
            return;
        if (source.equals("Draw"))
            repaint();
            return;
    public BufferedImage getImage()
        Dimension dim = getSize();
        BufferedImage image = (BufferedImage)createImage(dim.width, dim.height);
        this.graphics = (Graphics2D)image.createGraphics();
        System.out.print("\nImage ");
        paintCanvas();
        return image;
    public void paint(Graphics graph)
        this.graphics = (Graphics2D)graph;
        System.out.print("\nDraw ");
        paintCanvas();
    public void paintCanvas()
        // Set the Font
        Font theFont = graphics.getFont();
        theFont = theFont.deriveFont((float)TableFontSize);
        graphics.setFont(theFont);
        // Get the Font Size
        FontRenderContext frc = graphics.getFontRenderContext();
        float width = ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).width;
        float height= ((Rectangle2D.Float)theFont.getMaxCharBounds(frc)).height;
        System.out.print("FONT WIDTH HEIGHT [" + width + ", " + height + "] ");
        System.out.print(" SIZE "+ super.getWidth() +", "+ super.getHeight());
    public int print(Graphics graph, PageFormat pageFormat, int pageIndex)
        throws PrinterException
        if (pageIndex > 0) return Printable.NO_SUCH_PAGE;
        this.graphics = (Graphics2D)graph;
        graphics.translate(0,0);
        paintCanvas();
        return Printable.PAGE_EXISTS;
     * Interface method for Printing the Canvas on Paper
    public void printCanvas()
        PrinterJob printJob = PrinterJob.getPrinterJob();
        printJob.setPrintable(this);
        PrintRequestAttributeSet attr = new HashPrintRequestAttributeSet();
        if (super.getWidth() < super.getHeight())
            System.out.print("\nPrint PORTRAIT ");
            attr.add(OrientationRequested.PORTRAIT);
        else
            System.out.print("\nPrint LANDSCAPE ");
            attr.add(OrientationRequested.LANDSCAPE);
        Dimension dim = getSize();
        attr.add(new MediaPrintableArea(1, 1, dim.width, dim.height,
                                              MediaPrintableArea.MM));
        attr.add(new JobName("MyCanvas", Locale.ENGLISH));
        attr.add(new RequestingUserName("acj123", Locale.ENGLISH));
        if (printJob.printDialog(attr))
            try
                printJob.print(attr);
            catch(PrinterException ex)
                ex.printStackTrace();
    public static void main(String[] arg)
        JFrame frame = new JFrame("MyFrame");
        MyCanvas canvas = new MyCanvas(frame);
        frame.setSize(800, 600);
        frame.setVisible(true);
}

Weblogic: Exception while Validating SSOToken

Hi
we are installing LC 9.0.0 on Weblogic 10.3 and Oracle 10g (both on Solaris). The ConfigurationManager runs like expected until the point it imports the LC components (DSC) into the databaase. We get the same result if we configure Weblogic manually (according to the installation guide) or let ConfigurationManager do it automatically. The following components can be deployed but not started:
- adobe-tasknotification-dsc.jar
- adobe-tasksharing-dsc.jar
- adobe-queuesharing-dsc.jar
- adobe-guides-dsc.jar
Furthermore if we login to the adminui (with administrator user account) we are able to see the home screen and one level below but if we try to go any deeper (e.g. user management) we get redirected to the home screen.
In both cases we get the following log output:
com.adobe.idp.um.api.UMException| [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16386 errorCodeHEX:0x4002 message:nullcom.adobe.idp.common.errors.exception.IDPException| [com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean] errorCode:16386 errorCodeHEX:0x4002 message:nullcom.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean] errorCode:12803 errorCodeHEX:0x3203 message:Exception while Validating SSOToken chainedException:org.opensaml.InvalidCryptoException: SAMLSignedObject.verify() can't verify unsigned objectchainedExceptionMessage:SAMLSignedObject.verify() can't verify unsigned object chainedException trace:org.opensaml.InvalidCryptoException: SAMLSignedObject.verify() can't verify unsigned object
        at org.opensaml.SAMLSignedObject.verify(Unknown Source)
        at com.adobe.idp.um.util.SAMLHelper.verifySignature(SAMLHelper.java:330)
        at com.adobe.idp.um.util.SAMLHelper.verifySAMLResponse(SAMLHelper.java:292)
        at com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean.validateSSOToken( AuthenticationManagerBean.java:969)
        at com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean.authenticate(Auth enticationManagerBean.java:261)
        at com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean.authenticate(Auth enticationManagerBean.java:232)
        at com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean.authenticate(Auth enticationManagerBean.java:954)
        at com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean_sjvdcw_ELOImpl.au thenticate(AuthenticationManagerBean_sjvdcw_ELOImpl.java:635)
        at com.adobe.idp.um.api.impl.AuthenticationManagerImpl.authenticate(AuthenticationManagerImp l.java:120)
        at com.adobe.idp.um.auth.sso.SSOServlet.doPost(SSOServlet.java:214)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3495)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(Unknown Source)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 180)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
        at com.adobe.idp.um.api.impl.ManagerImpl.handleException(ManagerImpl.java:251)
        at com.adobe.idp.um.api.impl.ManagerImpl.handleException(ManagerImpl.java:194)
        at com.adobe.idp.um.api.impl.AuthenticationManagerImpl.authenticate(AuthenticationManagerImp l.java:122)
        at com.adobe.idp.um.auth.sso.SSOServlet.doPost(SSOServlet.java:214)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3495)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(Unknown Source)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 180)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Many thanks for your help!
Regards,
Daniel

Hi Chetan
Many thanks for your hint. In fact the XML parser was the problem. We added the additional JVM argument to the startup script and now LiveCycle is working on the Solaris/Weblogic platform:
-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.xerces.jaxp.DocumentBuilderFactoryIm pl
Regards,
Daniel

Problem in creation of HUs through FM HU_REPACK and HU_POST

Hi Experts
This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
0 10020000038479 S-DISP 1 EA S DISPNSARY
1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
Material is 810062
Batch is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

Hi Sailaja,
I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
But here is what I have been doing.
Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
Happy Debugging.

Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

Hi Experts
        This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
    0     10020000038479     S-DISP     1     EA          S DISPNSARY
    1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
    1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
Material is 810062
Batch    is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

*

Problem in creation of order relevant - intercompany invoice

Dear all ,
I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made.
Send ur email id so that the problem can be described if required....
Thanks .........

Hi,
while creating inter company sales order give the delivering plant in the overview screen. so that enables the system and tells that that is inter company sales order . u can verify whether the system takes which sales order whether it is standard order or inter company? by going to the conditions in the item overview in that u can find the "pi01" or "pi02" and select the delivery details there u can find the delivering plant which is supplying plant and the shipping point of the supplying plant..
in case of doubt u can mail me at [email protected]
Reward if Helpful..
Regards,
Praveen Kumar.D

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Installation error during creation of user SAPJSF

Hello,
i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
OS:windows 2003 enterprise 64bit
DB:db2 udb
SOlman: 7.0 including EHP1
The error from "sapinst.log":
WARNING 2010-09-17 10:32:40.906
Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
Sep 17, 2010 10:30:30... Info: Formal password check successful
Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:32:40... Info: Leaving with return code 4
The error from "UserCheck.log":
Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
Sep 17, 2010 10:36:59... Info: Formal password check successful
Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:38:56... Info: Leaving with return code 4
Edited by: DimitrisDimas on Sep 20, 2010 5:38 PM

hi
wat s ur JDK version??
please refer this,
[SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
jansi

Batch creation of users

Hello,
I need to register 15.000 users in my Portal. Noway I'm going to do this by hand.
I followed some discussion about user creation but still have some problems.
I create users using:
-portal30_sso.wwsso_ls_private.get_default_user_config
- portal30_sso.wwsso_ls_private.ls_create_user
- wwsec_api.activate_portal_user
This works fine and I can login. But ..
when I try to add the Account Information with procedure wwsec_api.modify_portal_user this has no result. The PDK-documentation is not correct because I need to specify more parameters than in the example. Netherless when I do this I still cann't look up the data under Account Information when the user logs in.
My second question concerns the last login date/time of a user. Which function is available to deliver this handy info. I want to show changes in my site since the last login of a user.
My third question, oh boy, concerns notification. Although perhaps not an issue for this discussion group it looks like Portal has some kind of mail notification system but where and how to use isn't clear for my. Maybe you could give me a brief explanation for this feature.
Thanks, DJ
null

can you post me an example of how you do this?

Problem in Import DMP-User Level to another tablespace

Hi,
I have some problem in recovering a user objects, using from exp logical dump file.I am using 8172 version of oracle.I took a exp backup from user 'john'(NOTE all objects of john are from "KATTY" tablespace).I tried to import to another database where there is no KATTY tablespace.While trying to do so,the operation wasn't succeeded becoz of the non existence of tablespace at the target database.But in this situation,I dont want to create tablespace called "KATTY",to make this successful,since there is no space in my sun box.Can some one suggest me an alternate method using imp(without creating the tablespace).

create you new user john in the new database prior to import. Ensure user john has a default tablespace on the new database. When import runs, if it cannont find the oeiginal tablespace, it will create objects in the default tablespace.

Getting an Out of memory exception while validating XML against XSD

Hello friends,
I am getting an Out Of Memory exception while validating my XML against a given XSd which is huge.
SAXParserFactory saxParserFactory = SAXParserFactory.newInstance();
        saxParserFactory.setValidating(true);
          SAXParser saxParser = saxParserFactory.newSAXParser();
         saxParser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");
         saxParser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",new File("C:/todelxsd.xsd")); as u may see the darkened code. this basically Loads the XSD in Memmory , and JVM throws an out of Memory exception. is there any other way round of validating an XML against an XSD where i dont have to load my XSD if not then kindly let me know the solution for above problem .
Thanks.

Yes, but increasing the heap size is a temporary solution , isnt there a way where the XML can be validated against an XSD without having to load XSD in memory

Problem in creation of User while validating accountId

Similar Messages

Maybe you are looking for