Problem in Displaying Data for Localised Reports

Hi everyone..I am having a problem with crystal Reports. I need Malayalam unicode( INDIAN Language) to be displayed in the reports, this data will be binded from database.
And the problem is : After applying this unicode font to the labels of my reports, some labels in the reports are going invisible.Also, previously if I increase the font size beyond 22, I used to get "A Generic error occured in GDI+". But after changing the textformat property of the field to "crRtfText" from "crstandardText" , I could resolve this Generic Error.
And, I could also observe that the last char of the fields in the "details" section is repeating.
This is the code I am using to apply local font to the labels.
Private Sub assignfont()
Dim Mfont As New Font("kartika", 20, FontStyle.Regular,GraphicsUnit.Pixel)
CType(Report.Section8.ReportObjects("Field45"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
CType(Report.Section8.ReportObjects("Field48"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
End Sub
And I am calling this function in the form load event of that report.
Any suggestion on this is greatly appreciated........Thanks in advance..

Dear MJ,
thanks for the reply and I am really sorry for my delay. Actually I got vexed waiting for any reply and stopped opening this forum.
And coming to your suggestion,
Ya, I tried assigning font at design time also, but nothing worked for me.
Even a textbox control also cannot show few characters which are said to be complex in malayalam script.
So, do u feel getting BOBJ support is the only way for this?
Thanks once again for your interest.
Regards,
raj.

Similar Messages

Problem in displaying data for G/L Account in Tcode FAGLB03

Hi,
I am a abaper but my client is facing a strange problem in Tcode FAGLB03 that when it runs the tcode the data displayed for a purticular finanacial year then there are few months which remains blank in the display but the Carry Forward Balance is accurate.
In the similar way when we execute tcode for previous financial year it is displaying the data accurately and filling all the months columns in it.
Is there any way to present the missing data for that puritcular finanacial year?
Edited by: nav009 on Jan 3, 2010 10:04 AM

Hi,
Please check the same with your netweaver administrator(basis consultant). He would have the user name and pwd for the SAP support portal. You can view notes in SAP support portal.
SAP clearly says in the note that it is because of program error and you need to implement the correction notes.
Do involve your FI consultant and Basis consultant to resolve this issue.
Thanks
Aravind

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

Problem in Displaying Date for Culture th-TH in SSRS 2010

Hello,
I have a text box of date/time type. And Language of the report is set to a parameter ex: @P_Culture_Name
and parameter will take a value from Prompt (UI).
Suppose default value of date/time text box is 1/22/2013 12:00:00 AM
when i pass 'en-US' to @P_Culture_Name output is 1/22/2013 (I have formatted text box to show only date part)
Problem is :
when i pass 'th-TH' to @P_Culture_Name output is 22/1/2556
look at the year, its showing 2556 instead of 2013.
Here i have to display year as 2013, Please give me a solution for this. And explanation(If possible) why it is showing 2556.
Thanks in advance.

But the date value is absolutly correct; in Thai calendar the year is 543 greater then in Christian calendar; see
http://en.wikipedia.org/wiki/Thai_solar_calendar
Olaf Helper
[ Blog] [ Xing] [ MVP]

Stored Procedure for displaying data in Crystal Reports

Hi I am new to Oracle & Crystal Reports,so can any one please give me sample stored procedure to display data in Crystal report from Oracle by passing rwo input values.

from site:-
Crystal Reports will only support the return of a single refcursor from Oracle. Even the latest and greatest version 10 doesn't allow you to return more than one recordset at a time. You could add one more step to your procedure that would join up the output of the multiple refcursors into a PL/SQL table and then fetch the result set out through a single refcursor. That way you are using temporary space that will be cleaned up as soon as the connection is terminated and will only be returning a single refcursor

Problem with displaying data's in a chart

I have a main VI (Hovedprogram) and 5 VI's (Ferdigprogram temp tur , Ferdigprogram temp retur, Ferdigprogram nivå, Ferdigprogram temp i fyr and Ferdigprogram trykk)who starts when I start the main VI.
I want to display data for last 15 seconds, last 24 hours, last week, last month and last year.
The problem is that the graphs for last week, last month and last year do not display all the data's. I just got a dot where I started the program 28.April. The graphs shows the data's from 2.May
Any suggestion how I can change my program to appear as described?
Attachments:
Hovedprogram.vi ‏748 KB

And here is one of the 5 VI's
Attachments:
Ferdigprogram temp retur.vi ‏125 KB

Problem in Loading data for clob column using sql ldr

Hi,
I am having problem in loading data for tables having clob column.
Could anyone help me in correcting the below script for ctrl file inorder to load the data which is in mentioned format.
Any help really appreciated.
Table Script
Create table samp
no number,
col1 clob,
col2 clob
Ctrl File
options (skip =1)
load data
infile 'c:\1.csv'
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
Data File(1.csv)
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"
Error Encountered
ORA-01461: can bind a LONG value only for insert into a LONG column
Table sampThanks in advance

I can't reproduce it on my 10.2.0.4.0. CTL file:
load data
INFILE *
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
BEGINDATA
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"Loading:
SQL> Create table samp
2 (
3 no number,
4 col1 clob,
5 col2 clob
6 );
Table created.
SQL> host sqlldr scott/tiger control=c:\temp\samp.ctl log=c:\temp\samp.log
SQL> select * from samp
2 /
        NO
COL1
COL2
         1
asdf
assasadsdsdsd"sfasdfadf"sdsdsa,ssfsf
         2
sfjass
dksadk,kd,ss"dfdfjkdjfdk"sasfjaslaljs
        NO
COL1
COL2
SQL> SY.

Scorecard doesn't display data for some selections

Hi,
I have configured a scorecard to display detail data (product quantities for 4 quarters) based on different parameter (product code) selection in other master scorecard. The detail dashboard doesn't display data for all the product codes. It's weird even data is there for the same product code where the scorecard is mapped in the excel however doesn't display. Appreciate if any of you can help me to overcome the issue.
Technology: SAP Dashboard 4.1 SP4, Oracle 11g
Thanks,
Anurag

Hi Anurag
Have you taken an excel snapshot and checked if the master scorecard has the rows you expect to see in the detail sorecard?
Thanks
Runali

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

Authorization problem when displaying icons in BW Report

Hi All
I have the following problem when display BW Report as iView: The report data itself is displayed perfectly but to display the icons (like DrillDown arrows, Hierarhy level open arrows) the Windows login message "Connect to <my BW server.com>:8000" appears and I have to enter BW user name and password explicitly. The system for BW is defined, the user is mapped, UIDPW method is used. Again, the report data itself is displayed, the problem is only with icons. I can see that the path to icons is like:
http://<my BW server>.com:8000/sap/bw/Mime/BEx/Icons/s_b_up.gif
How could I rid of this authorization request?

Thanks! I already did this and it helped for most of icons. But for five remaining icons i still get authorization request althoug these icons are in the same path. The icons are:
http://<server>.com/sap/bw/Mime/BEx/Icons/cascading.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/checked.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/separator.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/marked_right_35.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/loading.gif

Problem in displaying data.

Hi,
I am facing a problem in display of data for a particular employee. This is a HR report with 5 selection variables out of which 3 are mandatory and rest 3 like company code, Cost centre and Employee are optional.
when i run the report with company code and cost centre variable it shows me list of employees whose timesheet are missing in a particular time frame which misses out 1 employee and when i run the report with same variables but put in the employee it shows me the data of that employee which is assigned to same cost centre and company code. Its just that in first case i am using 2 diff optional variables and in 2nd i am using only 1 with rest of the variables same. This is so weired. For the first time i have encountered such issue. and if i run the report with company code and cost center and after getting the necessary output i select the filter value as that emplyees name i get the data for that employee.... I am unable to understand as to how where exactly is the problem?
i checked the master data of employees, cost centre and company code. Everything is working fine.
Kindly help to figure out the issue.
Kind regards,
Shailja kaul.

Please perform the consistency check for the cube in RSRV and confirm that all the dimensions in the cube are consistent. Sometimes, this happens, which generates such situation that some of records disappear in the result set if not mentioned in the selection screen.
Here as per your msg, if you mention the employee number, the record appears, that means you should also perform the consistency check for 0EMPLOYEE (if that is the infoobject for employee) master data.
Thanks
Danny.

Breakout of data for Webi Report

I am not sure if this question should go here or in the Universe forum but I will post it here first. I am using BOBJ Edge XI3.1 with SQL Server 2005 holding my data.
I have a universe that has 4 tables in it. The first table is "CSS_Facts" which is a Fact table consisting of aggregate data. Table two is "TJG_Organization_CSS" that holds six levels of hierarchy for all clients. Corporation, System, Facility, Division, Service Line and Department. Department is the lowest level so there is an "Organization_Key" for every department for every client. Table three is "TJG_Survey_CSS" which holds all of the survey data for every client. Every answer for every survey has its own "Survey_Key". Lastly I have "TJG_Time" which has a "Time_Key" for every day of the year.
Table "CSS_Facts" has a foreign key for each of the three tables above with the same field name as the key field in each of those tables. The cardinality for all three of these joins is many to 1 from the "CSS_Facts" table (ex: many "Survey_Keys" from the Facts table to one key in "TJG_Survey_CSS"). The facts table also has 4 other fields which hold the counts and or computed fields.
All of this works perfectly for most of what we do. I can build a WEBI document that has all of the fields that I need. As an example, I can get a report of all the statements for a given timeframe for a specific survey number for a specific client. If the survey has 50 statements in it I can get back all of the statements with the counts for all of the possible answers for each statement. This is expected and what we want.
Our problem is being able to break this down based upon the answer(s) to one question in the survey. Let's say statement number 2 in the survey is an age statement that has 5 possible answers. Answer 1 might be "Less than 18.". Answer 2 might be "19 to 29.", and so on. When I filter my query in my Webi to just bring back results for anyone who chose Answer 1 (Less than 18) for this statement I get back pretty much what I expect, that question only with all of the possible answers but a computed total for just answer 1 (less than 18) with all of the other answers getting zeroes. Again, this is what I expect to get back based on the WHERE clause that is generated but not really what we want. We want to get back the complete survey in the report, all 50 statements with new count totals per statement based on the answer (Less than 18) from that 1 question.
Is this possible to do within Webi reports? If not, can this be done outside of a webi report, but then brought back into the Universe to be consumbed by a Webi report?
Thanks for any help in advance.

You can use the following work-around without the need for an SDK solution.
Display this info in the report in stead of in the pop-up...
Just create a cell with the info want to show and hide it if there is data,
(use and alerter to empty it when you have data and hide on empty)
show it when there is no data fetched.
Hope this helps,
Marianne

No data for daily report sent from my PC

Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)

ambergris77 wrote:
Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)
Hi ambergris77,
First only one Software can be turned on within the operating system, otherwise you have problems. Also Network Magic needs Full Access, not just Outward Access.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Problem in retreiving data for the given user parameter year!!!

hi all,
I am working in oracle report 6i. I want to display the data for the date given in the parameter field(MM/YYYY).
For ex. Input is 07/2007 means i want to display the data from 04/2006 to 07/2007.Please guide me
to get this desire output......
Here is my query.....
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between to_number(to_char(:P_Date,'YYYY')) - 1 and to_number(to_char(:P_Date,'YYYY'))
and financial_month >= '04'
and financial_month < = to_char(:P_Date,'MM')
and division_code = 11
order by financial_month, financial_year
regards,
jame
Message was edited by:
Jame

Works fine if u gave values instead of variables.... But if we gave 02 in place of 11 like below.Query will get
confused to take which years 02 because in both 2005 and 2006 we have 02(Feb)thats y.......
how to overcome this prob.......I think, my entire query is wrong to get this desire output....Please guide me how
to solve......
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between 2005 and 2006
and financial_month >= '04'
and financial_month < = '02'
and division_code = 11
order by financial_month, financial_year

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Problem in Displaying Data for Localised Reports

Similar Messages

Maybe you are looking for