Problem in displaying two fields in dropdown on selection screen

Hi All,
I have a reqmt where i need to display the dropdown list for certain field.
For this perticular fields there is a description attached to it.
Please let me know teh way where i can display the field with description in dropdown.
Like
field1   field2
P         Hi
R        Hello
S        How are you
I am using CALL FUNCTION 'VRM_SET_VALUES' for the same.
Please reply asap.
Edited by: PRADEEPKULAT on May 20, 2010 2:03 PM

Hi,
I am not sure about your question,
I understood that you have to Display both key and Text.
If so Concatenate both Key and Text .
I mean,
TYPE-POOLS : VRM.
DATA : T_VRM TYPE VRM_VALUES,
             WA_VRM TYPE VRM_VALUE.
WA_VRM-KEY = 'Field1'.
CONCATENATE WA_VRM-KEY 'Field1' INTO
                   WA_VRM-TEXT SEPERATED BY SPACE.
INSERT WA_VRM INTO TABLE T_VRM.
WA_VRM-KEY = 'P''.
CONCATENATE WA_VRM-KEY 'Hi' INTO
                   WA_VRM-TEXT SEPERATED BY SPACE.
INSERT WA_VRM INTO TABLE T_VRM.
WA_VRM-KEY = 'R'.
CONCATENATE WA_VRM-KEY 'Hello' INTO
                   WA_VRM-TEXT SEPERATED BY SPACE.
INSERT WA_VRM INTO TABLE T_VRM.
WA_VRM-KEY = 'S'.
CONCATENATE WA_VRM-KEY 'How are you' INTO
                   WA_VRM-TEXT SEPERATED BY SPACE.
INSERT WA_VRM INTO TABLE T_VRM.
Then pass this table to the function module VRM_SET_VALUES.
I hope this resolves your issue.
Regards,
Raghava Channooru

Similar Messages

How to display the dynamic text in the selection screen

Hi All,
I want to display the dynamic text in the selection screen .... ( I searched in forums , didnt get the any answer fot this sort of qustion ).....
EX: If i have the date of today 31st it has to show message like " today date is 31 like some thing " when i execute the report .
Could any one face this sort of requirment, Please let me know.
Thanks in advance.
Reagrds,
Bharani

Where would you like this dynamic text being displayed? As an "message" or in some parameter field?
If first
parameters date type d.
data: text type string.
at selection-screen.
   concatenate 'Today is' date into text.
   message text type 'I'.
If second
parameters pa_text type c length 50.
at selection-screen on date.
if date is not initial.
    concatenate 'Today is' date into pa_text.
enidf.
at selection-screen output.
   "show it as read only
   loop at screen.
    if screen-name = 'PA_TEXT'.
           screen-input = abap_false.
          modify screen.
    endif.
   endloop.
Regards
Marcin

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Can we make some fields mandatory on CAT5 selection screen ???

Hi Experts,
Can we make some of the fields mandatory on CAT5 selection screen.
I want to make posting period as an mandatory field.
Thanks in advance.
Regards,

Use below link :
http://help.sap.com/saphelpnw2004s/helpdata/en/7d/f63a22015111d396480000e82de14a/frameset.htm_
Regards
Ashish

Add fields to logical database selection screen

Hello,
Is it posible to add a field in the default selection screen of a logical database.?
I´m using ELM. In the default selection screen, only the lifnr and ekorg fields are shown. I want to show the matnr field, is it posible?
Thank you!

Hello,
If you go to the attributes of report, where you are using Logical Database;
there is a button named 'Report Category', which controls the field on selection screen...
If you select that one you can choose report category and also can create your own category
Thanks

Problem in displaying a field in webdynpro using Adaptive RFC model

HI,
I created a webdynpro application using adaptive RFC model and i have a problem in displaying one of the output fields.
When i execute the function module it is giving the exact value for my output field in this case telephone number (of type STEXT which is char with length 40).But when i am trying to display that telephone number in webdynpro application it is taking only first 4 digits.
i deleted the model and recreated it still it doesnot work.
please let me know how to resolve it.
points will be awarded for sure
Bala

Hi Bala,
Whenever you reimport the model server restart is necessary otherwise the changes will not get reflected. You will get an error when you deploy the application.There is no go around except restarting the server as the meta data gets cached in the server as long as the server is runnig.So, Once you restart the server the cache will be cleared.
Check once again whether you are fetching data from correct BAPI field. Still problem persist try debugging.
Regards, Suresh KB

Question of possible problem with "display as" field in MS Outlook contact

Are you aware of any problems with an apparent shift of the display as field in MS Outlook contacts after the initial syncing with their iPhone? When preparing to send an e-mail in Outlook, the auto populating of the "display as" field is now linked to incorrect contacts. Therefore, one could unknowingly send an e-mail to the wrong recipient. After seeing this error, it appears that many of my "display as" fields have shifted among contacts within my Outlook contacts. This appears to have happened right around the first time I synced my iPhone. It could be completely unrelated to the iPhone syncing but I am curious if other iPhone / MS Outlook users have experienced similar problems.

There should be no leeway or movement. Return the phone to where you bought it and show them. It should be covered under warranty unless they determine it was dropped or accidental damage.

Need to display two ALV GRIDs in a single screen

Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Hi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji

Dropdown at selection screen field

Hi folks,
I know how to create drop down enabled field at selection screen but my problem is how to provide the input fie name or unix file name to this list..
file type will be DAT
please help me out
thanks in advance.
Edited by: KARTIKEY SINGH on Nov 1, 2008 11:27 PM

i can suggest you only possible way as i'm away from SAP now.
try to collect file name(from F4 FM) in one varibale(char) and than pass this to dropdown under INITILIZATION event.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Display compounded InfoObject value in BEX selection screen

Hi people,
Problem in 7.0
I have Costcenter compounded with Plant and I am using Costcenter for Selections in the BEx varaible screen.
After running the report, in the selection screen value help, only the value of Costcenter is displayed, not the compounded value (So it becomes very difficult to identify from which plant the costcenter is from)
What should I do so that the User sees as Plant/Costcenter in the Value help?
Problem in 3.5
The above issue is not there in 3.5, but.......
I select COSTCENTER X from PLANT A and execute the report. In the report output, I do not see the records only for COSTCENTER X from PLANT A, but for COSTCENTER X from all Plants
why is this? Is it how this works or is it a bug?
Please help. I appreciate your assistance very much.
Thanks,
Shameem

Hey there,
Please understand the behaviour of compounded keys from the below notes:
1111632   Problem with text display in BEx Query Designer
1080863   FAQ: Input helps in Netweaver BI
541253    Restricting characteristics with compound characteristics
575563    Selecting filter values for compound characteristics
Hope this can help,
Diego Seben

Addition of checkbox and 2 fields in ABap query selection screen

Hi
I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Radio button in two different blocks in the selection screen

Hi folks,
         In my selection screen i have two selection blocks. First block to create a new document no, second block to display the list of the created document numbers.User has to go any one of that..can i keep first radio button in the first selection block and the second radio button in the second block...I have already tried..but its not allowing..is this possible..if so please suggest me how...
           Thanks,
           Shyam.

Hi,
Hope the following logic will help u.
selection-screen begin of block input with frame title text-000.
parameters :desktop     radiobutton group rg_f user-command rg_f,
                   in_file type ibipparms-path modif id ps,
            menu     radiobutton group rg_f,
                   sys_file type ibipparms-path modif id as default '/sapia/iface/in/comm/sapfin/' .
selection-screen end of block input.
                                    AT SELECTION-SCREEN.                                       *
at selection-screen.
case sy-ucomm.
    when 'RG_F' or 'RG_B'.
      perform f_toggle_finputs.
    when 'ONLI'.
      if ( desktop = c_x and in_file is initial ) or ( menu = c_x and sys_file is initial ).
        message e100.
      endif.
endcase.
FORM    : f_toggle_finputs
loop at screen.
    if screen-group1 = 'PS'.
      if desktop = c_x.
        screen-input    = 1.
         sys_file = c_server_path.
      else.
        screen-input    = 0.
      endif.
    endif.
    if screen-group1 = 'AS'.
      if menu = c_x.
        screen-input    = 1.
        clear: in_file.
      else.
        screen-input    = 0.
      endif.
    endif.
    modify screen.
endloop.
endform. "f_toggle_finputs
Thanks.

Problem in displaying two fields in dropdown on selection screen

Similar Messages

Maybe you are looking for