Problem in displaying workflow Items in UWL

Hi all,
I am facing the following problems in displaying the workflow Items in UWL
I am able to see the work flow items in SAP inbox but not in UWL.
The following are my issues and questions
1. what is the type of system to be created in portal.
BI JDBC System
BI ODBO-Compliant OLAP System
KM Windows System
Portal Tenant System
SAP system using connection string
SAP system using dedicated application server
SAP system with load balancing
Web Service System using WSDL URL
2. what is the configuration need to be done in Universal Worklist & Workflow
3. Any other configurations need to be done in WAS server and SAP server.
Please anyone give me the solutions and it is urgent.
Thanks in advance
Thanks
Ponnusamy P

Hi,
1. What is the type of system to be created in portal ?
This depends on what type of a system are you trying to connect to. If it's an ECC system or R3 system, you may use SAP system using dedicated application server. Give an alias to it and check the permissions of that system.
2. What is the configuration need to be done in Universal Worklist & Workflow ?
You have register this system now. Go to System Administration -> System Configuration -> Universal Worklist Administration -> UWL Configuration -> Chose New -> Enter the Name, System Alias and select WebFlowConnector.
In the System Administration -> System Configuration -> Universal Worklist Administration -> Registration for all types of Universal Worklist WebFlow, register item types by clicking "Register Item types for all systems". Alternatively, you can also click on "Register items types for new systems".
3. Any other configurations need to be done in WAS server and SAP server ?
The portal user should have corresponding user on the ECC or R3 system or whichever backend system you are trying to connect to. This user should be authorized to have RFC access to function group SWK1 and transaction SWK1.
Please refer to this document which lists out all the steps. Please refer to minimal configuration section. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
Regards,
Sunil

Similar Messages

Problem in display line items in FS10N

Hi all,
I have checked ,check box in G/L account "Line items display " in FS00 in current period ( 4 / 2014 )after that line items get displayed in FS10N for this period .
There is problem in displaying line items for same G/L account with previous all periods such as 3/2014,2/2014,1/2014.
I have tried report "RFSEPA01" it works fine if we enter document number for selection with other parameters ,but it gives error if we run report with just Company code and G/L account .
Please provide any other way to get item details for previous periods or is there any update on report "RFSEPA01".
Please let me know why this issue occurred, if we activated the line item display for the particular G/L account in between the Posting period
Thanks,

Hi,
You can check below two programs
RFSEPA01 - for line item display
RFSEPA02 - for open item display
Steps to follow:
1. Block the G/L account from posting
2. Run both programs
3. Unblock the G/L account
this will make the earlier posted items visible.
Regards,
Jyoti

Problem in displaying POPUP_KEY_LOV item automatically filled in

Hi,
On page 1, I have an html region where I have an item P2_CUSTOMER_ID of type POPUP_KEY_VALUE based on a LOV on Customers table.
When the user selects an existing customer from that LOV, the field is correctly filled in with the customer name (which is the display value from the LOV).
But the user can also create a customer through a button that links to a page 2 where the user can enter all the data regarding the customer.
On this page 2, when pressing a CREATE button, the customer is created and the user returns to page 1. The item P2_CUSTOMER_ID of page 1 is then automatically filled in with the customer ID created on page 2.
The problem is that on the screen, the value displayed is the LOV return value (ID) and not the LOV display value (customer name).
Can you tell how to display the display value in that case?
Thanks.

Scott,
I may have done things wrongly as your suggestion does not work.
I have set the "Display as" of the item to "Display as text (based on LOV, saves state)", but then no data can be entered for the item and there is no LOV displayed (although the "list of values" section of the item is filled in with a LOV name).
Any other idea?
Thanks.

Problem while launching Webdypro Application on click of a work item in UWL

Hi All,
I am trying to launch a webdynpro application by clicking one of the work items in UWL. But I am getting the error as "iview N/A".
It is trying to use the UWL Launch Webdynpro iview(with the id com.sap.netweaver.bc.uwl.uwlLaunchWebdynpro)
I searched for the above iview,I could see all the UWL related iviews at the following location(Portal content->Content Provided by SAP->End user content->Standard Portal users->iviews ->com.sap.netweaver.bc.uwl.uwliviews)
I could find UWL Launch SAP BSP and UWL Launch SAP Transaction and few more,but could n't find UWL Launch Webdynpro iview.
Can any one let me know wat do I need to do,to get that iview.
I am working on EP6 & KMC SP19.
Thanks for the help
Regards,
Santhosh

Hi Santosh
One thing is clear that you can see your task in the UWL, If your SWFVISU is entry is correct (especially the System Alias ), the only reason i can see is the XML is not imported properly.
Login as administrator and navigate to
System Administration->System Configuration->Universal Worklist & Workflow->
Universal Worklist Administration
Re-Register your System again.
and click this link on the same page "Click to Administrate Item Types and View Definitions"
There will be an XML imported, just check your Task Number is present and check
the application, if exists should not be a problem.
If you see the SAP Standard ESS workflows, all webdynpro applicaitons are directly called by specifying the webdynpro component name, not as an iView.
I think you are using Portal iView to display your webdynpro, try to use the webdynpro applicaiton as it is.
Regards
Abhimanyu L

"SharePoint Designer cannot display the item" error when edit workflow

Hi
I create workflow for sharepoint list in version 2007. Then upgrade sharepoint form version 2007 to 2010. Now when I want to edit this workflow, get this error:
“SharePoint Designer cannot display the item.
What you can try:
Click the Refresh button or press F5 to refresh the content from your site.
Go back to the previous page
Most likely causes:
The file has been deleted from the site.
The site is encountering problems.”
What is the problem?
Thanks.

Hi,
Have you used custom activity in your workflow? We may come across this issue when we use custom activity. A workaournd is to modify the Workflows XOML file, and remove custom activity reference from it. And restart your SharePoint designer. See below blog.
http://saiabhilash.blogspot.com/2011/11/sharepoint-designer-cannot-display-item.html
Or a quick workaround is recreate the workflow in SharePoint Designer 2010.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

How to display multiple attachments in UWL item in portal?

HI,
How to display multiple attachments in UWL item in portal?
I want to display more than one attachment in UWL body,present its dispalying one attachment.
Pls help on this
Thanks,
Bheem
Edited by: v bheem on Aug 4, 2009 3:10 PM

Hi,
Are you able to manage this! Pls do let us know if you have done any configuration changes!

CAN Workflow items in KM appear in the UWL

Hi
We are looking the features of the Universal Worklist
and have configured SAP Business Workflow to appear in the
UWL.
Can all your workflow items in KM (Document Management)
be configured so that the end user and one place to see all workflow items
If so How? Please advise.
Regards
Arun

Hi
Just to get Clarity.
KM Notifications appearing in the recent notifications
small iview, will be incorporated only in stack 11.
We are currently on EP6 SP9 Patch 1 software un-licensed
from sdn.
Hence there is no config to be done because the functionality does not exist at the current level that we are running.
Regards
Arun

Problem in displaying text inside the item label - JFREECHART

Hi All,
I dont know whether this is the right place or not to post the queries related to jfreechart here .
I am facing a problem in displaying the text inside the item label in jfreeChart. I am trying to print the text in 2 lines one below the other at the top of each bar in waterfall chart.
Please find the code below in next post. The problem i am facing is it is neglecting the new line character . If any one knows how to display the text one below the other please help me out .
Thanks in advance .
Regards,
Diw

i am facing the problem in pasting the complete code as its exceeds the message text limitiation, please find the link below for the code .
http://www.java-forums.org/java-2d/12087-problem-displaying-text-inside-item-label-jfreechart.html#post36648
Early response will be appreciated . Thanks in advance
Regards,
Diw
Edited by: Diw on Sep 30, 2008 11:15 AM
Edited by: Diw on Sep 30, 2008 11:16 AM

Problem in displaying selected page items in the title in Graph

Hi There;
I have a problem in displaying selected value of named page item in the graphs.
Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet title and value of selected page item "Location" in my example.
But when I use the same (&WorksheetName &Location) in the title of graph or Axis of the graph, it would show up only the name of the worksheet but not the value of page item "Location", instead it would print "&Location"
Any idea why it is not able to reference the select page item in Discoverer graph? I am using Oracle BI Discoverer 10.1.2.1.
Thanks in Advance,
Regards,
Nidhi Jethoo

Hi Michael;
Thanks a lot. It might not have been considered necessary but you do require, e.g in my case I am plotting Average value of a Parameter and it does make sense in including the name/value of Parameter(surface water temp/bottom watter temp) as an Axis instead of just a constant Parameter or say Average Parameter. So that user can plot the variation of different parameters by changing the page items and when user changes the value of parameter and export the graph he/she has the parameter name(actual value) in the graph.
But I can include all the parameters (&Parameters) or all the page items(using &PageItems) in graph then why not individual page-item and individual parameter.
I would log a SR and see what they say.
Thanks again,
Nidhi

Workflow item update status problem

Hi,
we are having 2 level approval process (SRM 5.0 classic scenario). we are having below mentioned problem.
User creates a SC and it goes for approval.once he approves the SC.system shows the node id state as COMPLETED in bbp_pd but the workflow item status will be STARTED and status text will be IN Process.
could any one suggest me how to overcome this problem.do i need to execute any reports or any config is missing?
regards
subbu

Hi Masa,
i have checked the way you have sugggested.
1) before approval the status is STARTED and status text as IN Process and node id status is READY
2) After approval the status is STARTED and status text is IN PROCESS and node id status is COMPLETED
workitem id remains same. approver is not changing anything he is just clicking on approve button.i am not able to see any information in RZ20. i tried to update the cart status through program BBP_ALERT_SB_NOTTRANSFERED but i found no changes in RZ20
any suggestions please
regards
subbu

How to configure portal inbox workflow item?

Dear All,
I have a problem with my portal inbox. My workflow item in my development portal inbox is displaying differently from the production environment.
For example when the MSS user click on leave approval item in his inbox to approve a leave, my development portal is displaying the approval screen in a better view but the production is just displaying the backend sap inbox screen.
Anyone knows where I can configure this and is there any documentation for it. I suppose this is a UWL configuration right?
Thanks,
Regards,
Bryan

Hi Brian, that is the backend.. Transactions WFVISU seems to have some changes, what iview to display. This info is received when you register a system in the UWL Admin Console....
You could download the Config XML from Dev and import it to QA with a different name and higher prio and see if seomthing changes...
Regards,
Kai

Not able to approve SRM PO items through UWL

Hi All,
We have an issue in approving SRM Purchase Order (PO) Items through Portal UWL. We can approve SRM Contracts & Bid Invitations thru UWL, no issues with them. On click of the link to Contracts/Bid Invitations in the item detail section opens up a separate window where it displays the item detail and action buttons to approve or reject it. However the same does not get displayed for PO items. If you click the PO link in the item detail section, it opens up a separate window but point to a blank ITS Page.
Has anybody faced such problems with PO Items.
Your help is appreciated.
Thank you, John

Hi John,
I have got the same problem. Could you please let me know of how you resolved this problem. I would appreciate your help.
Regards,
Gopal.

Workflow task on UWL does not open in new window

Hi,
Some of the workflow tasks in my UWL do not open up in a new window when i click on them. I notice that these tasks are not even hyperlinked (underlined). Instead, when i click on the line, a small pop up shows to options: Forward and Resubmit. Therefore i am not able to approve / reject these workitems.
Whereas there are some other work items which open up in a new window on click.
Is this problem related to workflow configuarion (perhaps enabling the WF for portal) or is it something to do with UWL configuration?
Appreciate your help.
thanks
zubair

Hi Paul,
I face the same problem, any findings so far?
Thanks!
Best regards,
Sandra

Problem in retriving workitem id from uwl in abap webdynpro

Hello,
Curently, I've a problem similar with this post : Problem in retriving workitem id from uwl in abap webdynpro
But unfortunatelly there is no answer :/
I've followed this tutorial : http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal
And I have a problem in my WD Abap. The WI_ID field is empty (initial).
Here is my XML :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
 <ItemTypes>
 <ItemType name="uwl.task.webflow.TS90000087.ED1CLNT100" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
 <ItemTypeCriteria systemId="ED1CLNT100" externalType="TS90000087" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="WebDynproApplication" value="zps_pnpi"/>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="DynamicParameter" value="WI_ID1=${item.externalId}"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="WebDynproNamespace" value="sap"/>
 <Property name="System" value="ED1CLNT100"/>
 <Property name="display_order_priority" value="5"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
 </ItemTypes>
</UWLConfiguration>
Here are the parameter defined in my application :
WI_ID 000000000000 SWW_WIID
WI_ID1 ${item.externalId} STRING
And, i've made the test with both the WI_ID and the WI_ID1 in the XML but everytime, no value at all.
Could you please help me ? It's been three days I'm looking for a solution to get my Workitem ID in my Webdynpro ...

In fact, it's quite strange, I added the menu and toolbar display and I can see that my url contains the data ...
http://<begin_of_the_url>DynamicParameter=System%3DED1CLNT100%26wi_id%3D000000629442%26WI_ID%3D000000629442%26WI_ID1%3D000000629442<end_of_the_url>
So ... how is it possible ?
And the next question, how can I get the full url so I can parse it myself ?

Problem to repatraite the items for shopping cart status Held

Hello all experts,
In a scenario standalone I have a problem to repatriate the items for my shopping cart that have a status held.
I verify the data of item and catalog we don't have a difference for pricing product etc ......
If I repatriate item I see never data for my new shopping cart.
For other informations status for item is To be Processed.¨
Please help for this problem for all experts.

Hello Steve,
To remove action from specific workitems, you can do this in the UWL configuration file.
1) Download the configuration file (in ZIP format). Go to:
System Administration > System Configuration > Universal Worklist & Workflow > Universal Worklist Administration
Click to "Administrate Item Types and View definition".
Then download file 'com.sap.pct.srm.core'.
2) Navigate to each WI you would like to change:
- <ItemType name="uwl.task.webflow.srm.TS40007952"... (SC Completion)
- <ItemType name="uwl.task.webflow.srm.TS40007953"... (SC Approval)
- <ItemType name="uwl.task.webflow.srm.TS40007954"... (SC Approval)
3) Within those item types, put a new property to action reference "reject" for 'Actions' definition like below:
<Properties>
<Property name="display_order_priority" value="uwlExcludeFromPreviewDetail" />
</Properties>
4) Save and upload file again.
Regards.
Laurent.

Problem in displaying workflow Items in UWL

Similar Messages

Maybe you are looking for