Problem in executing the adobe form

Hi,
Using the SFP tcode i have createda an interface and a form for that interface.
i have to import parameters from vbap table which i have mapped in the form..there is no problem while executing and activating the form...
but while i am executing the form after passing the values i am getting an exception : SYSTEM ERROR
Meassage ID: FPRUNX
ADS: SOAP Runtime Exception: CSoap Exception Transport.
Are the forms craeted using SFP tcode are Standalone forms i.e. non-interactive forms?

Hi friend,
Its not like that the Adobe created using SFP is non interactive.
We can create interactive forms using SFP transaction using java code.
I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
Just check this and revert me if you have any issues. I will help you
Thanks,
Sri Hari

Similar Messages

Error whicle executing the adobe forms

Hi,
Iam executing the adobe form from the genereated functionmodule , after giving the print parameters LP01, error is coming like
SOAP RUNTIME EXCEPTION : Csoap exception transport : ( 1001001), Please let me know what does it mean.. i have installed Adobe forms newly in my system, is there any installaiton missed.. Please help in this.
Thanks,
Tirumal.

This error is due to missing some basis configuration of adobe forms. Besides you need to install Adobe Live Cycle in ur presentation server. So for ur error u need to contact ur basis consultant.
you can see below links which might be helpful to u.
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/content.htm
http://www.scribd.com/doc/14246206/ADS-Configuration-Guide
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm

I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

Using the Adobe Forms for printing through portal

Hi All,
I've got a problem with the fact that I do not know exactly how to use the Adobe Forms from the portal.
I've got the Form Objects done (Interface & Form using SE80) and they work OK when testing the form. The Interface gathers all the datas etc. and the form displays this correctly.
My problem now is that I need to have this form available from the portal, and this I presume needs some WebDynPro stuff or something else? I'm totally lost on this part ...
The customer wants to have a button or link in the portal that opens a new window with the produced PDF opened in the new window, much like opening a static PDF file. The user then has the option to print the PDF him/herself using Adobe Readers own print mechanism.
My interface has only one Import parameter (PERNR number) and one EXPORT parameter (default). The PERNR number must be supplied to the interface so that it can gather all the needed data based on this number.
Any help on this will be greatly appreciated and rewarded accordingly.
Thankyou in advance,
Kim

Hi Arnab,
from a forms point of view:
(I assume you have the ADS up and running on the Java stack. Without it, the form generation doesn't work.)
If you create your form in transaction SFP and execute the corresponding program that calls the form for testing in SE38, you get to the print dialogue. Here you may choose either locl or lp01 (or any other printer accessible through your network) and then select Print Preview. This should then display the PDF in SAP GUI.
If you are asking about general printer setup within SAP, check the corresponding documentation: http://help.sap.com/saphelp_nw04s/helpdata/en/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
Hope this helps,
Markus

Problem in Webdynpro and Adobe form with signature field

Hi experts!
I have a problem with Signature Field in Adobe Form showed in a Web Dynpro Abap.
During the execution I fill the Signature field correctly but when I push any other button of the Webdynpro, the Adobe Form shows me the next error.
After click OK, the webdynpro is hang and not respond.
Any idea why not respond?
Thanks.

Hi friend,
Its not like that the Adobe created using SFP is non interactive.
We can create interactive forms using SFP transaction using java code.
I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
Just check this and revert me if you have any issues. I will help you
Thanks,
Sri Hari

Access the adobe form data in the workflow container for further processin

HI,
I am using HCM processes and Forms. I need to access the form data in the workflow container once the workflow kicks off.
I need to access these data as would need it for further processing in the workflow.
I know that TS17900110 allows to import form conatiner to
-> WF Container in the field name and value pair. But I need to access a lot more fields than what is in the task. Is there a standard task which allow to retrieve all the fields in the form in one task or do I need to develope a custom class to do that. If so could you please provide some clue as in how to code this specific requirement as i am somewhat new to OO ABAP.
Thanks...

hi,
in the livecycle designer under libary tab u have webdynpro tab--->choose submit to sap button and place it in the adobe form ur designing. u can use this button to trigger the code that u have written in webdynpro java.
for eg if u have
a value node details
and under that two value attr fname,lname
import the model (Insertdata---it has two import param fname and lname)u need for updating the data to r3 system.
in the ctrller have a method submit.Here write the code to insert fname and lname into the db.
IPrivateMyForm.IDetailsElement elem = wdContext.nodeDetails().currentDetailsElement();
Insertdata_Input input = new Insertdata_Input();
wdContext.nodeInsertdata_Input().bind(input);
input.setFname(elem.getFname());
input.setLname(elem.getLname());
try
wdContext.currentInsertdata_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
catch (Exception ex)
{ ex.printStackTrace();}
ul bind details to the datasource.
when u edit ur interactive ui element these attr(fname and lname) vl be visible under dataview tab u can drag and drop them to the form
now add submit to sap button in ur form.
this button correspond to the onactionSubmit dat u have written in the ctrller.
so wen u click this the data vl be inserted
Regards
Jay

Calling the Adobe form in a workflow step for Approval

Hi All,
We are creating a PCR scenario using Adobe forms for "Employee seperation". This form will require 7 subsequent approvals from various agents which is to be handled using a workflow.
I had gone through the ISR cookbook and managed to create a scenario. I have also assigned it to a PDF form and a dummy workflow. Now from my PCR iview i am able to submit the form for my scenario which also triggers the dummy workflow(through the BUS7051-CREATED event).
Right now this dummy workflow just sends a mail(by sendmail step) to the first approver. Now i want this workflow to send a workitem to the first approver for approval of this form which will have to appear in his UWL. When the approver double clicks on the workitem in UWL he should be able to view the form along with Approve/Reject/Cancel buttons. I am not aware how to do this. My questions are,
<b>Is this handled by a decision step or an activity?
If it is an activity step which Task/Business object method is used to handle this?
If it is a decision step how do we make the Adobe form also to be displayed along with approve/Reject buttons?</b>
We are using ECC5.0 and EP6.0.
Thanks in advance for any help.
Prasath N

Hi Rajasekhar,
The UWL issue has been resolved now and i am receiving the workitems in my UWL. But i am getting the following error when i am trying to execute the workitem from my UWL.
<b>Service cannot be reached
What has happened?
URL http://xxxxxxxx.xxxx.xxx.xxx:8000/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrFormApprove call was terminated because the corresponding service is not available.
Note
The termination occurred in system xxx with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:DALSPHSB_HSB_37-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
</b>
I have done the following configuration settings in SWFVISU transaction :
Task : TS500000075
Visualization Type : WebDynpro Java
visualization parameter: Application
visualization Value: IsrFormApprove
visualization parameter: Package
visualization Value: sap.com/pcui_gp~isr
Is there anything else that i have missed out in the configuration?
Message was edited by:
prasath natesan
Message was edited by:
prasath natesan

Error during the adobe form activation

hi all,
when am i activate the adobe form layout (Zlayout) , the following error message occured:
Error during activation
Message no. EU837
but iam not found any syntax error in layout development.
please help in this it very urgent....
Thanks,
Ramana

Hello Sir,
You need to apply the note 1047930, After this the problem should be resolved.
Thanks and Regards,
Deepak...

Fetching a image in the adobe form from sap server/appliaction layer

hi all,
i want to fetch a logo/image from the application layer/ sap server, so that everyone can use it in adobe form. i have already upload the image using SE78.
I try to add the image into library, it works. But the problem is that, only from my login i can access that image, other can't. I want that image to be shared by everybudy like we use in smartform.
But i want to fetch that image from SAP server/application layer.
plzz help me out...
and tell me the steps for fetching the image from sap server/application layer into the adobe form layout.

Hi rahul,
I too have the same requirement. Can you please tell me the steps.

Read all rows in static table defined in the adobe form using webdynproABAP

Hi all,
The requirement is i have to display the 5 empty rows using adobe forms in the table format and retrieve the data from that 5 rows after user enter some value and post it in the database table. This is the part of my requirement.
I have done the designing part in interactive form and coding in WD using ABAP.
For that, I defined table in the adobe forms where in the DATA subform I have given Min count value is 5 instead of 1(selected the check box - repeat each item... also). I am able to display 5 empty rows successfully. After enter values in 3 rows and press SAVE button i am getting only first record but not all 3 records.
I have written the code for SAVE records in WD using ABAP. I am using this method "get_static_attributes_table" for getting all records.
Please help me resolving my issue.
Thanks in advance.

Hi,
In the WDDOINIT method, create an internal table with 5 empty rows and bind it to the context using the method Bind_Table.
Then try executing your program, this should work.
If it doesnt , do let me know.
Regards,
Runal
Edited by: Runal Singh on Jun 11, 2009 3:00 PM
Edited by: Runal Singh on Jun 11, 2009 3:08 PM

How to transport the adobe form

Hi Experts,
We created an adobe form based on the web service.
Now we moved all the transport request to the quality system.But the web service holds the dev system details only how to change these.
What is the procedure to move the Adobe forms based on web service, any thoughts.
Please help me on this.
Thanks in Advance,
Praveen

Praveen,
It always a good practice to share your solution when you close the thread so that it serves as reference for others with same problem.
Chintan

To assign the Adobe form in the communication method of the output type.

Hi Gurus,
SAP has provided an option to assign the SAP script In the communication method screen which will use to print the layout (document) using this SAP script. Internally it will overwrite the form name of the Nace transaction. SAP has not provided a field to assign the Adobe forms.
Can any one help me to resolve this issue
Thanks,
Raju Singhireddy

I don´t understand your problem. I always use Adobe forms in my NACE transaction. Otto

WDR_TEST_ADOBE in that ZCI version2 in the adobe form the submit button is

hi,
When i inserting the webdynpro script it's getting the error.
and also i chekced the wd application WDR_TEST_ADOBE in that ZCI version2 in the adobe form the submit button is not trigerring.. that indicates ome thing i have to install in my system...
Please tell me what i have to install... i instaleed ADLC.....
How can i execute the application.
Thanks

Hi Thomas,
I checked with my basis team they are telling that ADS installed in java stack and configured the same.
but still, WDR_TEST_ADOBE in that ZCI version2 in that form button action was not trigerring.I clicked the edit button enterd the values in the fields and then clicked the button.
can you please help me in the same.....
Thanks
Rams

How can i find the adobe form translations

Hi Friends,
how can i find the adobe form translations?
i mean i want to know in how many languages my adobe form has been translated?
is their any report or is their any technique to find the translations........................
Thanks,
Harish.K

Hello Harish,
To find the translation of Adobe form is nothing but to find the labels or texts used in this adobe form in various languages. This will give you an idea on how many languages your adobe form has been translated.
So to find the translations in different languages, you have to go to Context node of the Adobe form. Then go through the text nodes which are used as labels. These will be normally stored as Standard texts in SO10.
For example. Take the text name of any one text node.
1) Go to SE38.
2) Type program RSTXTRAN.
3) Let the Text key - object be TEXT.
4) Then enter this text name in the field Text key - name. I have put the sample standard text ZTEST_ADOBE as shown below.
5) Let the Text key - ID be ST.
6) In Text key - language, Enter * (i.e enter the Asterisk) because you want to find out all the languages.
The screen parameters will be as shown below.
7) Now Execute this report.
8) It will show all the various languages in which this particular standard text is used which is nothing but the Adobe form is being used in these many languages. For example, the standard text ZTEST_ADOBE is used in 3 languages, English, German and Spanish as shown below. It will look as shown below.
Note: This will give you the more or less the overall idea of the form that has been used in these many languages. But also make sure the standard text with particular language is also linked with the Transport Request. Because there are chances that the text was created in a particular language but was never used.

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

Problem in executing the adobe form

Similar Messages

Maybe you are looking for