Problem In Extracting xml file from Zip File

Hi,
In my application I am creating a zip file which contains some xml files. I am using Weblogic 8.1 for my application.
When I try to extract the xml file from the zip file it displays error and those xml files are not extracted from the zip file.
Otherwise on tomcat it works absolutely fine.
Is there any support issues of using the zip files with weblogic?
Please respond.
Thanks in Advance.

Friends
I resolved the problem
just to add the jars of
mail.jar and activation.jar in the client side.
regards
ashok

Similar Messages

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Problems with reading XML files with ISO-8859-1 encoding

Hi!
I try to read a RSS file. The script below works with XML files with UTF-8 encoding but not ISO-8859-1. How to fix so it work with booth?
Here's the code:
import java.io.File;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.net.*;
* @author gustav
public class RSSDocument {
    /** Creates a new instance of RSSDocument */
    public RSSDocument(String inurl) {
        String url = new String(inurl);
        try{
            DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
            Document doc = builder.parse(url);
            NodeList nodes = doc.getElementsByTagName("item");
            for (int i = 0; i < nodes.getLength(); i++) {
                Element element = (Element) nodes.item(i);
                NodeList title = element.getElementsByTagName("title");
                Element line = (Element) title.item(0);
                System.out.println("Title: " + getCharacterDataFromElement(line));
                NodeList des = element.getElementsByTagName("description");
                line = (Element) des.item(0);
                System.out.println("Des: " + getCharacterDataFromElement(line));
        } catch (Exception e) {
            e.printStackTrace();
    public String getCharacterDataFromElement(Element e) {
        Node child = e.getFirstChild();
        if (child instanceof CharacterData) {
            CharacterData cd = (CharacterData) child;
            return cd.getData();
        return "?";
}And here's the error message:
org.xml.sax.SAXParseException: Teckenkonverteringsfel: "Malformed UTF-8 char -- is an XML encoding declaration missing?" (radnumret kan vara f�r l�gt).
    at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
    at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
    at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
    at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
    at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
    at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
    at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
    at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at getrss.RSSDocument.<init>(RSSDocument.java:25)
    at getrss.Main.main(Main.java:25)

I read files from the web, but there is a XML tag
with the encoding attribute in the RSS file.If you are quite sure that you have an encoding attribute set to ISO-8859-1 then I expect that your RSS file has non-ISO-8859-1 character though I thought all bytes -128 to 127 were valid ISO-8859-1 characters!
Many years ago I had a problem with an XML file with invalid characters. I wrote a simple filter (using FilterInputStream) that made sure that all the byes it processed were ASCII. My problem turned out to be characters with value zero which the Microsoft XML parser failed to process. It put the parser in an infinite loop!
In the filter, as each byte is read you could write out the Hex value. That way you should be able to find the offending character(s).

GUI_UPLOAD - Problem in uploading xml file

Hi,
I have problem in uploading xml file into itab.
Here is the code
begin of GS_STRING,
        STR(72) type C,
      end of GS_STRING,
      GT_STRING like standard table of GS_STRING,
call function 'GUI_UPLOAD'
      EXPORTING
        FILENAME                = FILE_NAME
        FILETYPE                = 'ASC'
      TABLES
        DATA_TAB                = GT_STRING
      EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_READ_ERROR         = 2
        NO_BATCH                = 3
        GUI_REFUSE_FILETRANSFER = 4
        INVALID_TYPE            = 5
        NO_AUTHORITY            = 6
        UNKNOWN_ERROR           = 7
        BAD_DATA_FORMAT         = 8
        HEADER_NOT_ALLOWED      = 9
        SEPARATOR_NOT_ALLOWED   = 10
        HEADER_TOO_LONG         = 11
        UNKNOWN_DP_ERROR        = 12
        ACCESS_DENIED           = 13
        DP_OUT_OF_MEMORY        = 14
        DISK_FULL               = 15
        DP_TIMEOUT              = 16
        others                  = 17.
    if SY-SUBRC <> 0.
      message I499(SY) with 'File upload failed'.
      stop.
    endif.
endif.
In debuggin mode, i can see the itab uploaded with xml payload. But in that same place, the hexadecimal format has double zeros 00 after each character.
XML message : <?xml
Correct Hexadecimal : 3C3F786D6C
Hexadecimal in itab : 3C003F0078006D006C00
This makes the resultant xml invalid.
can anyone help me to solve this?
Thanks,
Uma
Edited by: Uma Maheswari on May 30, 2008 4:15 PM

what do you want to do with the uploaded XML?
i use the following
constants: line_size type i value 255.
data: begin of xml_tab occurs 0,
           raw(line_size) type x,
        end   of xml_tab,
        file type string,
        size type i.
call function 'GUI_UPLOAD'
    exporting
      filename            = filename
      filetype            = 'BIN'
      has_field_separator = ' '
      header_length       = 0
    importing
      filelength          = size
    tables
      data_tab            = xml_tab
    exceptions
      others              = 1.

Request: Problem in Extraction of data from CRM to BW

Hi Gurus
I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them:
1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and check the data in cube i can see all records but i cannot see the complete data i.e some data is missing.
2)And another problem is that In report i have 2 characteristics(DATS) start date and end date now i am trying to get number of days from start date to end date.
I appreciate you in advance. If u find any good documentation please send me to [email protected]
With regards
Nagamani.

Hi krishna,
yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

PL/SQL: numeric or value error when extracting xml file from tables.

create or replace FUNCTION proc_generate_xml_from_tables(p_directory in varchar2,
p_areaname in varchar2)
return integer
AS
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
clob_len number := 0;
file_ptr utl_file.file_type;
oTableName restore_metadata.table_name%type;
o_filename restore_metadata.table_name%type;
cursor metadata_restore_list(p_area varchar2) is
select * from restore_metadata
where instr(area_name,upper(p_Area)) > 0
order by degree;
vtabcount number := 0;
sql_stmt varchar2(300);
BEGIN
dbms_lob.createtemporary(result, true,dbms_lob.session);
oTableName := upper('MAINT_ACTVS');
vtabcount := 0;
sql_stmt := 'select count(*) from ' || oTableName;
execute immediate sql_stmt into vtabcount;
o_filename := oTableName || '.xml';
file_ptr := utl_file.fopen(p_directory,o_filename,'W');
dbms_output.put_line(oTableName);
qryCtx := dbms_xmlgen.newcontext('select * from ' || oTableName);
result := dbms_xmlgen.getxml(qryCtx);
--dbms_output.put_line(result);
clob_len := dbms_lob.getlength(result);
dbms_output.put_line('Length of the clob file' || clob_len);
utl_file.put_line(file_ptr,result);
utl_file.fclose(file_ptr);
dbms_xmlgen.closeContext(qryCtx);
dbms_lob.freetemporary(result);
return 0;
EXCEPTION
when others THEN
utl_file.fclose(file_ptr);
dbms_output.put_line('Table Name into Consideration :- ' || oTableName);
dbms_output.put_line('Oracle Error Number:- ' || sqlcode || ' Ora Message :- ' || sqlerrm);
return -1;
END;
I am getting the following errors..
SQL> @temp1.sql
MAINT_ACTVS
Length of the clob file34245
Table Name into Consideration :- MAINT_ACTVS
Oracle Error Number:- -6502 Ora Message :- ORA-06502: PL/SQL: numeric or value error
What am I doing wrong here?
DB version is Oracle 10g
Edited by: userAtoZ on May 6, 2011 2:55 PM

>
My problem lies that my xml file is having data more than 32 K.
When I write it 32K at a time then it work fine.
>
Then break it down.
l_pos number;
WHILE (l_pos <= clob_len)
LOOP
UTL_FILE.PUT_LINE (file_ptr,DBMS_LOB.SUBSTR ( RESULT , 32767,l_pos));
l_pos := l_pos + 32767;
END LOOP;
utl_file.fclose(file_ptr);

Error while extracting XML file from the application server

Hi ,
I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
the file is extracted, but with a '#' symbol at the first position.
Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
Is there any way to remove the '#' symbol while extracting itself ??
Thanks in advance,
Vikas.

Select the option "No Character Set Conversion" in stead of Code page 1100.
However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too.

Problem in reading xml file from server

Hi,
I am using tomcat 4.1 and jdk 1.4.
All the class files and xml files are put into the one jar file.
While running our application a jar file is called from jsp file. in that file we are embedded applet coding. here by i am sending my applet code with this...
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = "500" HEIGHT = "500" codebase="http://java.sun.com/products/plugin/1.2/jinstall-12-win32.cab#Version=1,2,0,0">
<PARAM NAME = CODE VALUE = "Screen.class" >
<PARAM NAME = CODEBASE VALUE = "/Sample/web/" >
<PARAM NAME = ARCHIVE VALUE = "csr.jar" >
</NOEMBED></EMBED>
</OBJECT>
while running our application from another machine we are getting exception filenotfounfexception in the xml is in the generated jar file.
Exception:
org.xml.sax.SAXParseException: File "file:///C:/Documents and Settings/Administrator/Desktop/control_property.xml" not found.
but that xml file is in the jar file and that jar file is present under sample application folder.
what should i change in the applet code? is there any thing related to trusted applet ?
Thanks

You have the xml file in the jar so it is a resource?
http://java.sun.com/docs/books/tutorial/uiswing/misc/icon.html#getresource
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/ClassLoader.html#getResource(java.lang.String)

Problem while reading XML File from Memory

I want to read the data from an XML File which is residing in memory.The XML File should be read not by the name or the location of the file but by a Response String.
So Can anybody help me out how can get this.
I tried it with BufferedInputStream but BufferedInputStream needs InputStream as a Parameter and i am not able to get what parameter should be passed into the BufferedInputStream as the syntax of this is
BufferedInputStream(InputStream in)
Its very Urgent !!!
Thanks in Advance

I have created the parsing method.
The code is like this.
if(response.toString().equals("CS_NEWS_RESPONSE"))
*//InputStream in = new BufferedInputStream(InputStream());*
*//InputStream in = new BufferedInputStream(response.toString());*
*//BufferedInputStream b = new BufferedInputStream(in);*
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse(in);
Element root = doc.getDocumentElement();
The code will go like this....
response.toString() is containing the response type which is the identification of that particular XML File. By using this my file is identified and after identification of this file, i should read the contents and parse them.
Sentences in the bold are the ways. Is this the correct way ??
Amit Will you be able to help me or is there anybody else who knows about this.
Edited by: Monadear on Oct 5, 2007 9:37 AM

Performance problems loading an XML file into oracle database

Hello ODI Guru's,
I am trying to load and XML file into the database after doing simple business validations. But the interface takes hours to complete.
1. The XML files are large in size >200 Mb. We have an XSD file for the schema definition instead of a DTD.
2. We used the external database feature for loading these files in database.
The following configuration was used in the XML Data Server:
jdbc:snps:xml?f=D:\CustomerMasterData1\CustomerMasterInitialLoad1.xml&d=D:\CustomerMasterData1\CustomerMasterInitialLoad1.xsd&re=initialLoad&s=CM&db_props=oracle&ro=true
3. Now we reverse engineer the XML files and created models using ODI Designer
4. Similar thing was done for the target i.e. an Oracle database table as well.
5. Next we created a simple interface with one-to-one mapping from the XSD schema to the Oracle database table and executed the interface. This execution takes more than one hour to complete.
6. We are running ODI client on Windows XP Professional SP2.
7. The Oracle database server(Oracle 10g 10.2.0.3) for the target schema as well as the ODI master and work repositories are on the same machine.
8. I tried changing the following properties but it is not making much visible difference:
use_prepared_statements=Y
use_batch_update=Y
batch_update_size=510
commit_periodically=Y
num_inserts_before_commit=30000
I have another problem that when I set batch_update_size to value greater that 510 I get the following error:
java.sql.SQLException: class org.xml.sax.SAXException
class java.lang.ArrayIndexOutOfBoundsException said -32413
at com.sunopsis.jdbc.driver.xml.v.a(v.java)
The main concern is why should the interface taking so long to execute.
Please send suggestions to resolve the problem.
Thanks in advance,
Best Regards,
Nikunj

Approximately how many rows are you trying to insert?
One of the techniques which I found improved performance for this scenario was to extract from the xml to a flat file, then to use SQL*LOADER or external tables to load the data into Oracle.

Performance problem when creating XML-file

Hi,
I want to create a XML-file with customer data from an internal table. This internal table has appr. 62000 entries. It takes hours to create the elements of the file.
This is the coding I have used:
loop at it_debtor.
    at first.
    Creating a ixml factory
      l_ixml = cl_ixml=>create( ).
    Creating the dom object model
      l_document = l_ixml->create_document( ).
    Fill root node
      l_element_argdeb = l_document->create_simple_element(name = 'argDebtors'
                  parent = l_document ).
    endat.
Create element 'debtor' as child of 'argdeb'
    l_element_debtor = l_document->create_simple_element(
                 name = 'debtor'
               parent = l_element_argdeb ).
Create elements as child of 'debtor'
    l_value = it_debtor-admid.
    perform create_element using 'financialAdministrationId'.
    l_value = it_debtor-kunnr.
    perform create_element using 'financialDebtorId'.
    l_value = it_debtor-name1.
    21 child elements in total are created
endloop.
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                      document = l_document ).
l_rc = l_renderer->render( ).
open dataset p_path for output in binary mode.
if sy-subrc eq 0.
    loop at l_xml_table into rec.
      transfer rec to p_path.
    endloop.
    close dataset p_path.
    if sy-subrc eq 0.
      write:/ wa_lines, 'records have been processed'.
    endif.
else.
    write:/ p_path, 'can not be opened.'.
endif.
form create_element using    p_text.
check not l_value is initial.
l_element_dummy = l_document->create_simple_element(
                name = p_text
                value = l_value
                parent = l_element_debtor ).
                                                                                endform.                    " create_element
Please can anyone tell me how to improve the performance.
The method create_simple_element takes a long time.
SAP release : 46C
Regard,
Christine

Hi Christine!
There might be several reasons - but you have to look at the living patient, not only the dead coding.
You did not show any selects, loop at ... where or read table statements -> the usual slow parts are not included (or visible...).
Of course the method-calls can contain slow statements, but you can also have problems because of size (when internal memory gets swaped to disc).
Make a runtime analysis (SE30), have a look in SM50 (details!) for the size, maybe add an info-message for every 1000-customer (-> will be logged in job-log), so you will see if all 1000-packs are executed in same runtime.
With this tools you have to search for the slow parts:
- general out of memory problems, maybe because of to much buffering (visible by slower execution at the end)
- slow methods / selects / other components by SM30 -> have a closer look
Maybe a simple solution: make three portions with 20000 entries each and just copy the files into one, if necessary.
Regards,
Christian

Problem reading an xml file using java

i have a Com File which is called through .Net application and i made another java application that call the same COM file using JNI . but the problem is that the xml format generated from the Com file in case of the .Net application is approx 49.9K and the same Xml file Contents generated through java is half the size of the previous file in .net about 24.9K . I had figured out that the .Net application generates the xml file as unicode format while the java application generates the same xml format as ANSI format which is approx the half of the .Net counterpart .
but the problem now is that i can't deserialize the java generated xml to convert it into its java object using XMLDecoder because it is ill formed xml whereas its tags are well structured .
even when i try to open that .NEt xml file into the IE browser it structures the xml file successfully
while the java xml file version tells me that the file is ill formed knowing that the file is well structured and all the tags are valid.

First of, that's not "Unicode" and "ANSI". Those are not really encodings per-se. "Unicode" is sometimes used to refer to UTF-16/UCS-2, and "ANSI" is sometimes used to refer to whatever the current 1-byte encoding of the machine is. But again: Those are not valid encoding names. The encodings used are probably UTF-16 (or UCS-2) and UTF-8, respectively.
Next: unless you tell us some exact error message we can't tell you what went wrong.
And if you want to find out if any given XML file is valid, just run it through some validator (such as [the one from the W3C|http://validator.w3.org/]).

Xslt ecc6 ISO-8859-1 problem when download xml file

Hello,
i create an ABAP test program:
*& Report Z_ABAP_TO_XML                                             *
*& Write the data from an internal ABAP table into an XML document, *
*& and write it onto your frontend computer                         *
REPORT z_abap_to_xml.
TYPE-POOLS: abap.
CONSTANTS gs_file TYPE string VALUE 'C:\Users\Marco Consultant\Desktop\test.xml'.
* This is the structure for the data to go into the XML file
TYPES: BEGIN OF ts_person,
cust_id(4)    TYPE n,
firstname(20) TYPE c,
lastname(20) TYPE c,
END OF ts_person.
* Table for the XML content
DATA: gt_itab        TYPE STANDARD TABLE OF char2048.
* Table and work area for the data to fill the XML file with
DATA: gt_person      TYPE STANDARD TABLE OF ts_person,
      gs_person      TYPE ts_person.
* Source table that contains references
* of the internal tables that go into the XML file
DATA: gt_source_itab TYPE abap_trans_srcbind_tab,
      gs_source_wa   TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex      TYPE REF TO cx_root,
      gs_var_text    TYPE string.
* Fill the internal table
gs_person-cust_id   = '3'.
gs_person-firstname = 'Bill'.
gs_person-lastname = 'Gates'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '4'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
* Fill the source table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPERSON".
GET REFERENCE OF gt_person INTO gs_source_wa-value.
gs_source_wa-name = 'IPERSON'.
APPEND gs_source_wa TO gt_source_itab.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION z_abap_to_xml
    SOURCE (gt_source_itab)
    RESULT XML gt_itab.
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Download the XML file to your client
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    not_supported_by_gui    = 22
    error_no_gui            = 23
    OTHERS                  = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
and i created XSLT test conversion:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <CUSTOMERS>
      <xsl:apply-templates select="//IPERSON/item"/>
    </CUSTOMERS>
</xsl:template>
<xsl:template match="IPERSON/item">
    <item>
      <customer_id>
        <xsl:value-of select="CUST_ID"/>
      </customer_id>
      <first_name>
        <xsl:value-of select="FIRSTNAME"/>
      </first_name>
      <last_name>
        <xsl:value-of select="LASTNAME"/>
      </last_name>
    </item>
</xsl:template>
</xsl:transform>
Seem all correct infact the program download a file XML but the file have the encoding="UTF-16" also if i have specified "iso-8859-1" and if i tried to opend the xml file the file appears not correct because is generated with as first character "#", why?
Below the xml generated..
What i have to do to generate a correct XML without errors?
#<?xml version="1.0" encoding="utf-16"?>
<CUSTOMERS>
<item>
    <customer_id>0003</customer_id>
    <first_name>Bill</first_name>
    <last_name>Gates</last_name>
</item>
<item>
    <customer_id>0004</customer_id>
    <first_name>Frodo</first_name>
    <last_name>Baggins</last_name>
</item>
</CUSTOMERS>

hello all!
i resolve the problem using:
* Perform the XSLT stylesheet
g_ixml = cl_ixml=>create( ).
g_stream_factory = g_ixml->CREATE_STREAM_FACTORY( ).
g_encoding = g_ixml->create_encoding( character_set = 'utf-16' "unicode
    byte_order = 0 ).
resstream = g_stream_factory->CREATE_OSTREAM_ITABLE( table = gt_xml_itab ).
call method resstream->set_encoding
    exporting encoding = g_encoding.
I think it's the right way, i put all my ABAP program updated:
*& Report Z_ABAP_TO_XML                                             *
*& Write the data from an internal ABAP table into an XML document, *
*& and write it onto your frontend computer                         *
REPORT z_abap_to_xml.
TYPE-POOLS: abap.
CONSTANTS gs_file TYPE string VALUE 'C:UsersMarco ConsultantDesktop     est.xml'.
data: g_ixml type ref to if_ixml.
data: g_stream_factory type ref to IF_IXML_STREAM_FACTORY.
data: resstream type ref to if_ixml_ostream.
data: g_encoding type ref to if_ixml_encoding.
* This is the structure for the data to go into the XML file
TYPES: BEGIN OF ts_person,
cust_id(4)    TYPE n,
firstname(20) TYPE c,
lastname(20) TYPE c,
END OF ts_person.
* Table for the XML content
DATA: gt_xml_itab        TYPE STANDARD TABLE OF char2048.
* Table and work area for the data to fill the XML file with
DATA: gt_person      TYPE STANDARD TABLE OF ts_person,
      gs_person      TYPE ts_person.
* Source table that contains references
* of the internal tables that go into the XML file
DATA: gt_source_itab TYPE abap_trans_srcbind_tab,
      gs_source_wa   TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex      TYPE REF TO cx_root,
      gs_var_text    TYPE string.
* Fill the internal table
gs_person-cust_id   = '3'.
gs_person-firstname = 'Bill'.
gs_person-lastname = 'Gates'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '4'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '5'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '6'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '7'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '8'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '9'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '10'.
gs_person-firstname = 'Frodo'.
gs_person-lastname = 'Baggins'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '11'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
gs_person-cust_id   = '88'.
gs_person-firstname = 'Frodoèé'.
gs_person-lastname = 'Baggins~¦Üu0192'.
APPEND gs_person TO gt_person.
* Fill the source table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPERSON".
GET REFERENCE OF gt_person INTO gs_source_wa-value.
gs_source_wa-name = 'IPERSON'.
APPEND gs_source_wa TO gt_source_itab.
* Perform the XSLT stylesheet
g_ixml = cl_ixml=>create( ).
g_stream_factory = g_ixml->CREATE_STREAM_FACTORY( ).
g_encoding = g_ixml->create_encoding( character_set = 'utf-16' "unicode
    byte_order = 0 ).
resstream = g_stream_factory->CREATE_OSTREAM_ITABLE( table = gt_xml_itab ).
call method resstream->set_encoding
    exporting encoding = g_encoding.
TRY.
    CALL TRANSFORMATION z_abap_to_xml
    SOURCE (gt_source_itab)
    RESULT XML gt_xml_itab.
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Download the XML file to your client
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = gs_file
    FILETYPE                  = 'BIN'
CHANGING
    data_tab                = gt_xml_itab
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    not_supported_by_gui    = 22
    error_no_gui            = 23
    OTHERS                  = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- we don't need the stream any more, so let's close it...
CALL METHOD resstream->CLOSE( ).
CLEAR resstream.

Problem in importing XML file

good morning,
i've a problem when i try to import an XML file to SQL.
In my particular case i've an xml file structured like this:
<?xml version="1.0" encoding="UTF-8"?>
<Flussi xmlns="http://indennitario.acquirenteunico.it/Semplificato/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Flusso xsi:type="FlussoSI1.1150Type" COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>
I managed to import that file in that way:
DECLARE @XML AS XML, @hDoc AS INT, @SQL NVARCHAR (MAX)
SELECT @XML = '<Flussi
>
<Flusso COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>'
EXEC sp_xml_preparedocument @hDoc OUTPUT, @XML
SELECT
Cod_flusso = Events.value('@COD_FLUSSO', 'int'),
Cod_servizio = Events.value('@COD_SERVIZIO', 'varchar(20)'),
--EventIsFixed = Events.value('(IsFixed)[1]', 'varchar(20)'),
--EventKind = Events.value('(EventKind)[1]', 'varchar(20)'),
PIVAUtenteUscente = Events.value('(IdentificativiRichiesta/PIVAUtenteUscente)[1]', 'varchar(20)'),
CodPratUtente=Events.value('(IdentificativiRichiesta/CodPratUtente)[1]', 'varchar(20)'),
CodPOD=Events.value('(DatiTecnici/CodPOD)[1]', 'varchar(20)'),
Cf=Events.value('(AnagraficaClienteFinale/CF)[1]', 'varchar(20)'),
Cmor=Events.value('(DefinizioneIndennizzo/Cmor)[1]', 'float'),
Credito=Events.value('(DefinizioneIndennizzo/Credito)[1]', 'float'),
DataSwitching=Events.value('(DefinizioneIndennizzo/DataSwitching)[1]', 'varchar(20)'),
DataEmissione=Events.value('(FattureIndennizzo/DataEmissione)[1]', 'varchar(20)'),
TipoFattura=Events.value('(FattureIndennizzo/TipoFattura)[1]', 'varchar(20)'),
DataScadenza=Events.value('(FattureIndennizzo/DataScadenza)[1]', 'varchar(20)'),
IdentificativoFattura=Events.value('(FattureIndennizzo/IdentificativoFattura)[1]', 'varchar(20)'),
NumeroGiorniErogazione=Events.value('(FattureIndennizzo/NumeroGiorniErogazione)[1]', 'int')
--ParameterName = Events.value('(Fields/Parameter[@Name="Name"]/@Value)[1]', 'varchar(20)'),
--ParameterDuration = Events.value('(Fields/Parameter[@Name="Duration"]/@Value)[1]',
'varchar(20)')
FROM
@XML.nodes('/Flussi/Flusso') AS XTbl(Events)
EXEC sp_xml_removedocument @hDoc
The problem is that when i try to import the initial file with this kind of attributes: xsi:type="FlussoSI1.1150Type" i can't get the data.
does anyone know how to solve the problem? thank you

declare @x xml='<?xml version="1.0" encoding="UTF-8"?>
<Flussi xmlns="http://indennitario.acquirenteunico.it/Semplificato/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Flusso xsi:type="FlussoSI1.1150Type" COD_FLUSSO="1150" COD_SERVIZIO="SI1">
<IdentificativiRichiesta>
<CodPratGestore>688628</CodPratGestore>
</IdentificativiRichiesta>
</Flusso>
</Flussi>'
;WITH XMLNAMESPACES(default 'http://indennitario.acquirenteunico.it/Semplificato/1.0')
select p.q.value('@COD_FLUSSO','int'),
p.q.value('@xsi:type[1]','varchar(100)'),
p.q.value('@COD_SERVIZIO','varchar(10)'),
p.q.value('(IdentificativiRichiesta/CodPratGestore)[1]','int')
from @x.nodes('/Flussi/Flusso')p(q)
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Problems with creating XML file via Call Transformation

Hi,
When creating a XML file via Call transformation an extra character '#'is placed at the beginning of the file.
This problems occurs since the upgrade to ECC6.0 and the Unicode conversion.
When opening the XML file the following error message appears:
Invalid at the top level of the document. Error processing resource 'file ....
Has anybody an idea why this extra character is placed at the beginning of the file. Has it something to do with the unicode conversion and how can we solve the problem?
thanks for your help
kind regards,
Maarten van IJzendoorn

Hello Marteen,
Can you please share the solution to this issue and let me know.
Our Issue:
1) We are executing a report which generates an XML file on FTP.
2) The FTP file is always in Error when executed thorugh JAPANESE login but not thorugh EN login.
3) The XML files generated have always an extra character in the end ( which can be space,#,$%^&, etc.) when this extra character is removed from XML file with opening it in NOTEPAD then XML works OK in JA login as well.
4) In the PROGRAM everything has been checked with respect to OPEN dataset statement , XML ports UNICODE etc.
5) THIS issue has been reported only after upgrading to ECC 6.0 from 4.6C.( in older version it works fine).
Various OPEN dataset statments are :
OPEN DATASET path_fil
FOR OUTPUT
Thanks to reply.

Problem In Extracting xml file from Zip File

Similar Messages

Maybe you are looking for