Problem in getting the output.

I am able to get the output when i run the report program.But if i run the same program, via T-code ,its going back to the initial screen.
Any help/input regarding this is highly appreciated.
Thanks in advance.
Regards,
Booma

hi,
follow the below procedure to create Tcode for Report
1) Go to SE93 and enter transaction name
2) Select 2nd radio button ie program and selection screen (report program)
3) Enter your report Program name in Program
4) Selection screen as 1000
5) Select SAP GUI for Windows checkbox
Reward points if it is helpful.
Regards,
Srilatha.

Similar Messages

Problem in determining the output (Print, ALE, etc) for Exchange document

Hi Experts,
I am facing a problem in getting the output for certain Exchange netting documents. If I remove Exchange contract number from the netting document, The out put is getting generated as required. But if a Exchange contract number is mentioned in the Netting documents ( the case is appearing only for couple of netting documents) the out is not getting generated. On analysing, system gives message that it is not able to find the required partner role ( its Bill to party in this case). But BP partner roles is set.
Please let me know which are the partner roles that are required for this output determination.
Thanks a lot,
Amit Kothari
Edited by: Amit Kothari on Apr 28, 2009 1:07 PM
Edited by: Amit Kothari on Apr 28, 2009 1:08 PM

Hi Experts,
I am facing a problem in getting the output for certain Exchange netting documents. If I remove Exchange contract number from the netting document, The out put is getting generated as required. But if a Exchange contract number is mentioned in the Netting documents ( the case is appearing only for couple of netting documents) the out is not getting generated. On analysing, system gives message that it is not able to find the required partner role ( its Bill to party in this case). But BP partner roles is set.
Please let me know which are the partner roles that are required for this output determination.
Thanks a lot,
Amit Kothari
Edited by: Amit Kothari on Apr 28, 2009 1:07 PM
Edited by: Amit Kothari on Apr 28, 2009 1:08 PM

Are You All Able to get the Output In EXCEL Format

Hi All,
I have one question. Are You All Able to get the Output In EXCEL Format?? I am working on Oracle Apllication 11.5.10.2 and my XML builder is 5.0.1. Problem which i m facing is this...... Whenever i am submitting a concurrent program with format type different from PDF i could not able to view the ouput in desired format. When i am pressing view output it gives me a file in XML and when i save that file with extention 'xls' or 'rtf' then i could able to see the saved file in desired format.
Can anyone tell me where is the problem??? Is it a bug?
I am using microsoft world 2000 sp-3.
Please give your valuable comments. May be your comments can solve my problem..
Thanks
Ravi

Hi I got Same issue
When I change Format to EXCEL from
Submit request>> Option>> Format = EXCEL
In window I am getting something HTML code and
when I try to copy it to Browser from Tools>> Copy File in to Browser I am getting following message
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'p' does not match the start tag 'a'. Error processing resource 'http://our url.com:8000/OA_CGI...
<p class="c0"><a name="Text4" id="Text4"><a name="Text1_1" id="Text1_1"><span class="c1">Dept No <...
But I can see the output when Format is PDF
Pls suggest solution ,I am using EBS 11.5.10.2.
Thanks
Rahul
Message was edited by: Rahul
user576181

In oracle Httpuritype - Not getting the output correctly

Hi, I am trying out httpuritype in oracle for the first time. My requirement is to get the input string and the from_language and to_language and has to be converted accordingly.
I am using oracle 11.2.0.1.
So had setup acl explicitly and started writing the below program.
create or replace procedure trans_new_prc1
(p_words in varchar2, -- words to be translated
p_to in varchar2 , -- language to translate to
p_from in varchar2 ) -- language to translate from
is
l_res varchar2(2000);
l_words varchar2(2000);
txt varchar2(2000);
begin
txt:=utl_url.escape(l_words);
l_words:=regexp_substr(httpuritype('http://translate.google.co.in/?hl=en&tab=wT#'||p_from||'/'||p_to|| txt).getclob(),'"(.*?)"',1,1,null,1);
Dbms_output.put_line( l_words);
end;
While converting from polish language to english language I get the output as
SQL> exec trans_new_prc1('hen','pl','en');
text/html; charset=ISO-8859-2
But i need the exact string in polish language, which i am not getting. Please guide me.
Even while converting it into chinese language, i get the following message
SQL> exec trans_new_prc1('hen','zh-CN','en');
text/html; charset=ISO-8859-2
Please guide me to get the output exactly in chinese language.

I think the problem is, google translate is not giving that info with this URL ! I removed REGEXP_SUBSTR and get all html code from HTTPURITYPE, in returned code, there is no translated word info!
for the code
exec trans_new_prc1('hen','ENGLISH','AUTO');result is:
<!DOCTYPE html><html><head><meta content="text/html; charset=ISO-8859-1" http-equiv="content-type"><meta name=keywords content="translate, translations, translation, translator, machine translation, online translation"><meta name=description content="Google's free online language translation service instantly translates text and web pages. This translator supports: English, Afrikaans, Albanian, Arabic, Armenian, Azerbaijani, Basque, Belarusian, Bengali, Bulgarian, Catalan, Chinese, Croatian, Czech, Danish, Dutch, Esperanto, Estonian, Filipino, Finnish, French, Galician, Georgian, German, Greek, Gujarati, Haitian Creole, Hebrew, Hindi, Hungarian, Icelandic, Indonesian, Irish, Italian, Japanese, Kannada, Korean, Latin, Latvian, Lithuanian, Macedonian, Malay, Maltese, Norwegian, Persian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swahili, Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian, Urdu, Vietnamese, Welsh, Yiddish"><meta name=robots content=noodp><meta name=google content=notranslate><link rel="canonical" href="http://translate.google.com/"><title>Google Translate</title><link rel="search" type="application/opensearchdescription+xml" href="/opensearch.xml?hl=en" title="Google Translate"><script>function _gtErr(e){var i=new Image();i.src='/gen204?jserr='+encodeURIComponent(e+": "+e.stack).substr(0,2000);i.onload=function(){i.onload=null;};}window.onerror=_gtErr;</script><script>(function(){var ti_a=function(b){this.t={};this.tick=function(b,c,a){a=void 0!=a?a:(new Date).getTime();this.t=[a,c]};this.tick("start",null,b)},ti_b=new ti_a;window.jstiming={Timer:ti_a,load:ti_b};if(window.performance&&window.performance.timing){var ti_c=window.performance.timing,ti_d=window.jstiming.load,ti_e=ti_c.navigationStart,ti_f=ti_c.responseStart;0<ti_e&&ti_f>=ti_e&&(ti_d.tick("_wtsrt",void 0,ti_e),ti_d.tick("wtsrt_","_wtsrt",ti_f))}
there is no "THEM" (translated word) in it. (I couldnt write whole returned info because exceed post limits.)

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap. I am trying to export 33 PSD files in BRIDGE to a PDF like I used to do on my other computer with bridge.

Let's start with the general things.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Problem in printing the output !

I have around 45 fields to show in the output !
i have given linesize 1023 because i have to get the output horizontally.
but still i am not able to adjust.
IS there any other way so that I can customize my print out

Friend,
My answer is available for this problem in this thread...
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=4317216
Goto Se11
In the datatype give TBLISTBR (it is a standard element, it will ask you access code for changes)...
go into change mode...
in the value range ...change teh upper limit as 2000....
save and activate
now go into menu utitilities->setttings->data browser->output list width->set to 2000....

Problem to get PDF output from Jetform Central on HP-UX

I was running Jetform Central on HP-UX box with a compiled form with PDF being the default driver.
I had no problem to fill data on the form and print to a HP Laserjet printer through the LJ5SI driver. But when using the PDF driver to print the same form I could not get the output created. I got error of "Invalid Printer Type (98)" message.
I had the PDF driver selected and set as default in the compiled form.
I also had the "-aspPDF" and the "-zMy_Output.pdf" options set as the command-line parameters of the "jfmerge" command.
Why did it complain about the print driver being invalid ??
What's missing here ??
Why couldn't this work ??
Please help
Thanks
Andy Liang

My company originally attempted to install Central 5.7 back in May of 2009, and had the same problem. We went back to the previous version because we didn't need any of the new features, and our paid 3rd party support was unable or unwilling to help us. More recently we found the need for the new features in 5.7 and came across the following:
http://www.adobe.com/support/products/enterprise/support_knowledge_center_central.html
http://download.adobe.com/pub/adobe/server/central/win/print_agent_5_7_0_09099_for_windows .zip
We installed the patch and it worked.

Problem in getting the database connection from a connection pool

Hai All,
I am facing a problem in getting the database connection from a connection pool created on weblogic server 8.1.
I am using the Oracle database 8.1.7.
I have configured my connection pool, datasource and JNDI in weblogic.
In my java program i have the following code to retrieve the connection.
import java.sql.*;
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.InitialContext;
class jdbcshp1 {
    public static void main(String[] args) {
     Connection connection = null;
     try {
           Hashtable ht = new Hashtable();
           ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory"); // Wanna get rid of this.
           ht.put(Context.PROVIDER_URL,"t3://localhost:7001"); // wanna get rid of this.
           // Get a context for the JNDI look up
           Context ctx = new InitialContext(ht);
        javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("myjndi1");
          //Create a connection object
          connection = ds.getConnection();
     The above code is working fine but, the two ht.put statements are creating problem.
The problem is, after converting the application into WAR file it can be deployed
on any machine or different port on same machine. My application fails if its deployed on
weglogicserver which is at different port.
Is there any way that i can get rid of those ht.put statements or any other way to solve the problem.
any help is appreciated.
Thanks in advance
Pooja.

Hai All,
Firstly, thanks for ur reply.
Even i have seen some code which uses context constructor with out any parameter and works fine.
i dont understand why its not working for my code.
When i remove those ht.put code and use context constructor with out any parameter, it giving an error.
Context ctx = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("ocjndi");
connection = ds.getConnection();The error is as follows:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
the above error is forcing me to include those code but if the port number is changed the code will not work. Plz let meknow if some setting have to be made.
I appreciate all ur valuable help.
Thanks once again.
Pooja.

How to get the output of a standard report RFBILA00 in PDF form.

hi,
I have to get the output of the standard report RFBILA00 in the PDF form.
Thanks.

Hi Rao,
you can run your report RFBILA00 in background and in background job you can add one more step, next in that step you can add custom report like zsubmit .
job should be set like
step1: RFBILA00 with variant.
Step2: zsubmit report with variant.
In Zsubmit report you can read, your first step spool using FM GET_JOB_RUNTIME_INFO
and pass that spool in the FM CONVERT_ABAPSPOOLJOB_2_PDF.
when second report run in job you can set your target like download in the server or send email etc.
Regards,
Prasenjit

How to get the output of a procedure in to a log file ?

Hi, Everyone,
Could you please tell me
How do i write the output of a procedure to a log file ?
Thanks in advance...

Hi,
could you please explain me more on how to use the UTL_file to get the output to a log file as in am new to PL/SQL
my script file is
EXEC pac_sav_cat_rfv.pro_cardbase (200910,'aaa',100,'test_tbl');
i need the output of this statement in a log file.
Could you please explain to me how it can be done.
thanks in advance

Is it possible to get the output of a text container into Spool..?

Hi
I am trying to write a report for a standard transaction(SM65) in BDC and run thru background job so as to get the output in to Spool. Right now I am facing an issue to get the SM65(text container) tcode output into spool.
FYI..I am using "CALL TRANSACTION 'SM65' USING BDCDATA MODE 'E'."
Please provide tour valuable inputs.
Thanks!
Shiv

Hi Shiv,
Instead of writing BDC for T-code SM65 I would suggest you to use following function module to get the required data.
      CALL FUNCTION 'BPT_ANALYSE_START'
        EXPORTING
          server_name            = servername_tmp
          check_all_btc_servers = sbpt1020-allsrvchk
          profile_check          = sbpt1020-profilechk
          xpgm_environment_check = sbpt1020-xpgmcheck
        TABLES
          protocol_tbl           = global_protocol_tbl
        EXCEPTIONS
          OTHERS                 = 99.
Once you got the data into "global_protocol_tbl " you can create spool of it.

NOOB Question - Cannot seem to get the output in a text or CSV file - Please help!!

I was able to put together a script which finds members of a certain AD group, filters down the users, and then calculates the number of days till a password reset is needed. I am able to get on screen exactly what i am looking for, but cannot seem
to figure out how to get the same data to a file. What i am doing wrong? two goals here:
1. Create a spreadsheet with a list of users whose password is about to expire.
2. Down the line automate an email to users whose password is about to expire.
Here is my code:
## Get List Of Users in Password Change Lockout that do not have an expired password or a password that never expires
$Names = (Get-ADGroupMember -Identity "Password Change Lockout" -Recursive |`
Get-ADUser -Properties * |`
Where-Object {$_.PasswordNeverExpires -eq $False -and $_.PasswordExpired -eq $False} |`
Sort-Object name |Select-Object -ExpandProperty SamAccountName)
## Get Password last Set values for all
Foreach ($Name in $Names)
$VAR1 = (Get-ADUserResultantPasswordPolicy -Identity $Name).MaxPasswordAge
$VAR2 = (Get-ADUser $Name -Properties *).passwordlastset
$VAR3 = (Get-ADUser $Name -Properties *).name
$DTPC = (New-TimeSpan -Start (Get-Date) -End ($VAR2 + $VAR1) | Select-Object -ExpandProperty Days)
Filter users to those who need to change thier password in 15 days.
If ($DTPC -lt 15)
No matter what i try between the {} after the If statement, I cannot get the output to a file. However, if I use a Write-Output I get exactly what i looking for. I feel like i am forgetting some basic concept and could really use some help. Thanks.
Matt
Matt Dillon

Hi Matt,
I generally create an empty array (something like $out = @()) at the top of the script and then use $out += $desiredOutput inside of the foreach loop.
Outside of the loop, you can then pipe $out to Out-File or Export-Csv, depending on your needs.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

How to get the output path in Java?

Hi all,
is there a way (method) to get the output path (where compiled classes are put) in Java?
thx a lot!
Michele

If you have already successfully loaded the classes into memory, and you want to find out where the classes are physically stored, then you can use Class.getResource() to retrieve the location of the file.
import java.net.URL;
public class Find
private void run(String obj) {
    try {
      Class cls = Class.forName(obj);
      //Here is the change to input correct resource path
      //instead of class name
      String resourcePath = "/"+obj.replace('.','/')+".class";
      URL url = cls.getResource(resourcePath);
      System.out.println(url);
    catch (Exception e) {
      e.printStackTrace();
public static void main(String[] args) {
    Find find = new Find();
    find.run(args[0]);
}java Find java.lang.String
jar:file:/usr/local/j2sdk1.4.2_13/jre/lib/rt.jar!/java/lang/String.class
Edited by: Jin on Oct 23, 2007 10:38 AM

How to get the output format options of SAP QUERY

Hi Gurus,
I want to get the output options available for sapquery program.means when you execute the program "AQZZ/SAPQUERY/FDF1============" you will get output options like sap alv,display as table,wordprocessing etc.
i am not able to unsderstand the logic in that standard code.my requirement is after fetching the data from the database i want to provide the ouput options SAP ALV,DISPLAY AS TABLE,WORD PROCESSING,SPREAD SHEET,FILESTORE.
I can output the data in SAP ALV and i can store the data.But i am not able to use the the remaining options in my program.please provide me solution.
I am very much thankful to the people who can provide me the solution.

Hi,
If you have a query then go to transaction 'SQ01' . Then press the change button . Then u will able to see the Output Options.Their u can select the option what ever u want.

Problem in getting the output.

Similar Messages

Maybe you are looking for