PROBLEM IN GIVING RETURN VALUES IN SECOND PROGRAM GROUPING IN BENEFITS MODU

HI EXPERTS..
what could be the return values for the bstat if we define 2 nd progarm grouping as different geographical locations?
Is it possible to use geographical locations in defining first program grouping or second program grouping?
Please give u r valiuable advice..
thanks in advance.
sairam

Similar Messages

SQL - Select Help - Case When? Return Value from Second Table?

Hi - next to folks on this board I am probably somewhere between a Beginner and an Intermediate SQL user.
Ive been using a case when statement in plsql to find "all those who's status in any program was cancelled during a specific time, but have become or are still active in a second program"
So, Im effectively trying to return a value from a second table in a case when, but its not liking anthing other than a declared text like 'Yes' or 'No'.
Here is the select statement - is there another way to do this where I can get the results I need?
case when pp.party_id in (select pp1.party_id -- Cancelled clients Active in another program
                                   from asa.program_participation          pp1,
                                        asa.curr_prog_participation_status cpps1
                                  where pp1.program_participation_id = cpps1.program_participation_id
                                    and pp1.party_id = pp.party_id
                                    and cpps1.code_value = 'ACT')
            then 'Yes' else 'No' end as Active_in_Other_Prg
So - in place of 'Yes' i basically want the program that they are active in or pp1.program_id, else Null
It is possible that the client can be active in more than one program as well.
Any assistance is greatly appreciated, i explored with if's and decodes but I cant get anything to work.
Batesey

Sounds like an outer join. See ora doc: Joins
select p.*
,      q.party_id
,      q.program_id
from   table_with_party_id p
,    ( select pp1.party_id -- Cancelled clients Active in another program
       ,      pp1.program_id
       from   asa.program_participation          pp1,
              asa.curr_prog_participation_status cpps1
       where pp1.program_participation_id = cpps1.program_participation_id
       and    pp1.party_id = pp.party_id
       and    cpps1.code_value = 'ACT') q
where p.party_id = q.party_id ( +)
Note: In the example above there shoudn't be a space between the ( and +), but the forum software automagically converts this to
The outer join will link show all records from the p table and only records from q if the party_id matches, ie q.party_id and q.program_id will be null if there is no match.
edit: added program_id

Not getting the return value of a program though it has no errors

public static String giroReturnFileDate(String strType)throws IOException{
          try{
               SimpleDateFormat getFormatDate = new SimpleDateFormat("yyMM");
               Date date = new Date();
               String str = getFormatDate.format(date);
               System.out.println("Current Date is : "+ str);
               System.out.println("Fetching the Giro file now");
               if(strType.equalsIgnoreCase("WPD") || strType.equalsIgnoreCase("ISTD")) {
               FileReader inputFileReader = new FileReader("giro2itcs_"+strType+".txt");
               ArrayList list = new ArrayList();
               ArrayList list1 = new ArrayList();
               System.out.println("Reading the file");
               BufferedReader inputStream = new BufferedReader(inputFileReader);
               String inLine = null;
               String str1 = null;
               while((inLine = inputStream.readLine()) != null && inLine.length() < 2)
                    list.add(inLine);
               System.out.println("Control Record for giro2itcs_"+strType+"is:"+ inLine);
               inputFileReader.close();
               inputStream.close();
               for (int i=0; i<inLine.length(); i++ )
                    str1 = inLine.substring(19,23);
               System.out.println("date of the transaction is:"+str1);
               if (str .equals(str1)){
                    System.out.println("giro2itcs_"+strType+".txt file is created today");
                    return "true";
               else{
                    System.out.println("giro2itcs_"+strType+".txt file is not created today");
                    return "false";
               }// end of if
               return "test";
          }// end of try
          catch(Exception e) {
          System.out.println("The Exception is ::::::::::::::"+e);
return "one";
}//end of giroReturnFileDate(...) method
}//end of of the class
main method is seperate. this program compiles fine but am not getting the return value for this. none of the return values. plzzz help me.

can you send me the code complete one ...
i will debug and solve the problem
[email protected]
By publishing your email address you are likely to get loads of spam.

Webservice : problem with Base64 returned value

Hello all,
We are calling a webservice from a Flex2 application.
When the returned value does not contain accentuated letters,
we receive the value "as-is", everything is OK.
When there is at least one accent, the result is
automatically Base64 encoded by the server, and the
xsi:type="n2:base64 is specified in the XML answer.
The problem is that Flex2 does not Base64 decode the returned
string, ans we cannot get the right value.
We do not think that the problem is on the server, because we
tryied to use 2 other webservice clients, and they worked well.
We wonder if Flex2 can handle Base64 encoding on Webservice
results or not.
We thought abut using the Base64 decoder class, but it won't
work because the result if not *always* Base64 encoded (depending
if it contains some chars or not).
Is there any solution to this issue ? If it can help, I paste
the XML returned by the server at the end of this message.
Thank you for your help.
MiF
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:env="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<env:Body>
<n1:GetArticleResponse xmlns:n1="urn:ActionWebService"
env:encodingStyle="
http://schemas.xmlsoap.org/soap/encoding/">
<return xmlns:n2="
http://schemas.xmlsoap.org/soap/encoding/"
xsi:type="n2:base64">PD94bWwgdmVyc2lvbj0iMS4xIiBlbmNvZGluZz0iSVNPLTg4NTktMSI/Pgo8
YXJ0aWNsZXM+CiAgPGFydGljbGU+CiAgICA8aWQ+MTwvaWQ+CiAgICA8Y29k
ZT5NaXRjaDwvY29kZT4KICA8L2FydGljbGU+CiAgPGFydGljbGU+CiAgICA8
aWQ+MjwvaWQ+CiAgICA8Y29kZT5Qb2xvPC9jb2RlPgogIDwvYXJ0aWNsZT4K
ICA8YXJ0aWNsZT4KICAgIDxpZD4zPC9pZD4KICAgIDxjb2RlPkvpa+k8L2Nv
ZGU+CiAgPC9hcnRpY2xlPgo8L2FydGljbGVzPgo=</return>
</n1:GetArticleResponse>
</env:Body>
</env:Envelope>

You should use cast_to_varchar2 regardless what is source of base64_encode.
Because base64-value consists of single byte ASCII-characters.

Problem to trace return value of malloc provided by libmtmalloc.so

When using libc, dtrace is able to trace the return value of malloc by following script
#!/usr/sbin/dtrace -s
pid$1::malloc:entry
    self->trace = 1;
    self->size = arg0;
pid$1::malloc:return
/self->trace == 1/
    printf("Ptr=0x%p Size=%d", arg1, self->size);
    ustack();
    self->trace = 0;
    self->size = 0;
}While exchange to use libmtmalloc.so(set env LD_PRELOAD=libmtmalloc.so), the script is failed to trace the return value of malloc. the arg1 always stores the memory's size that allocated by malloc, but not the memory's address.
Do I make some mistakes?

Problem found,
http://www.opensolaris.org/jive/thread.jspa?threadID=41902&tstart=0
But any walk-around or fix?

Problem with the return value from a tablemodel after filtering

I have a form (consult that return a value) with a jtextfield and a jtable. when the user types in the textfield, the textfield call a method to filter the tablemodel.
everything works fine, but after filtering the model, the references are lost and the return value does not match with the selected row.
I read that convertColumnIndexToView, convertRowIndexToView, vertColumnIndexToModel and convertRowIndexToModel, solve the problem, but I used all and nothing.
**** This is the code to fill the jtable
DefaultTableModel modelo=(DefaultTableModel)this.jTable1.getModel();
while(rs.next()){
Object[] fila= new Object[2];
fila[0]=rs.getObject("id_categoria");
fila[1]=rs.getObject("nombre");
modelo.addRow(fila);
this.jTable1.getColumnModel().removeColumn(this.jTable1.getColumnModel().getColumn(0));
// I delete the first column because is a ID, I dont want that the user see it. the value is only for me**** this is the method to filter from the jtextfield
private void FiltrarJtable1() {
TableRowSorter sorter = new TableRowSorter(this.jTable1.getModel());
sorter.setRowFilter(RowFilter.regexFilter("^"+this.jTextField1.getText().toUpperCase(), 1));
this.jTable1.setRowSorter(sorter);
this.jTable1.convertRowIndexToModel(0);
}*** this is the method that return the ID (id_categoria) from the tablemodel
private void SeleccionarRegistro(){
if(this.jTable1.getSelectedRow()>-1){
String str_id =this.jTable1.getModel().getValueAt(this.jTable1.getSelectedRow(),0).toString();
int_idtoreturn=Integer.parseInt(str_id);
this.dispose();
}else{
JOptionPane.showMessageDialog(this,"there are no records selected","Warning!",1);
}Who I can solve this problem?

m_ilio wrote:
I have a form (consult that return a value) with a jtextfield and a jtable. when the user types in the textfield, the textfield call a method to filter the tablemodel.
everything works fine, but after filtering the model, the references are lost and the return value does not match with the selected row.
I read that convertColumnIndexToView, convertRowIndexToView, vertColumnIndexToModel and convertRowIndexToModel, solve the problem, but I used all and nothing.
You're right in that you have to use convertRowIndexToModel(), but you are using it wrong. That method takes as input the index of a row in the view, i.e. the table, and returns the corresponding row in the underlying TableModel. No data is changed by the call, so this:
this.jTable1.convertRowIndexToModel(0);is meaningless by itself.
What you need to do is the following:
int selectedRow = this.jTable1.getSelectedRow(); // This is the selected row in the view
if (selectedRow >= 0) {
int modelRow = this.jTable1.convertRowIndexToModel(selectedRow); // This is the corresponding row in the model
String str_id =this.jTable1.getModel().getValueAt(modelRow, 0).toString();
}Hope this helps.

Problem with Bapi_po_Getdetail return values

We have developed a web service in asp.net to get the details of a particular purchase order number calling Bapi_po_Getdetail. The input parameters that we pass are:
string ITEMS = X
string PURCHASEORDER= <purchase order number>
But when we debug and check the return values from the bapi, BAPIEKPO Table doesnt have any data, it is null.
Could someone help us, please?

Please initialize the BAPIEKPOTable bedore call. Passing null allways returns null.
NCo:
string ITEMS = X
string PURCHASEORDER= <purchase order number>
BAPIEKPOTable result = new BAPIEKPOTable();
proxy.Bapi_po_Getdetail(ITEMS, PURCHASEORDER, ref result);
Soap Processor / Web Service Wizard
string ITEMS = X
string PURCHASEORDER= <purchase order number>
BAPIEKPO[] result = new BAPIEKPO[0];
proxy.Bapi_po_Getdetail(ITEMS, PURCHASEORDER, ref result);

LOV problem with multiple return values.

I created a ViewObject and in it a transient attribute.
I create a ViewAccessor for another field and a LOV for it (default InputText with Lov Value).
In List Return Values I added also my tranient attribute in order to receive another attribute from the accesor VO.
When I run it from the Application browser I see my transient attribute emtpty even if the "source" attribute is not empty.
If I change the value from the LOV the source value changes bit the transient is still empty.
What's wrong ?
Tks
Tullio

Repost.

A problem about incorrect return value

Hi,expert:
   we have a scenario ECC(Proxy)->PI->P6(soap), request and response message use the xslt mapping.
   The response message contains chinese characters,but when the message come to PI,the chinese charater is garble.
   The xml encoding is UTF-8.
   I have tested this interface by soapui,and it can return the correct character.
   How can i solve this problem?

Try to change the XML encoding by using XMLAnonymizerBean adapter module.
http://help.sap.com/saphelp_nw04/helpdata/en/45/d169186a29570ae10000000a114a6b/content.htm
Chinese Simplified (GB18030) GB18030
Chinese Simplified (GB2312) GB2312
Chinese Simplified (HZ) HZ
Chinese Traditional (Big5) Big5
Japanese (Shift-JIS) Shift_JIS
Japanese (EUC) EUC-JP
Korean EUC-KR
Unicode (UTF-8) UTF-8
refer this
http://htmlpurifier.org/docs/enduser-utf8.html

ADF Code Corner 069 : problem with returned value

Hello,
I use jdeveloper 11.1.2.2.0 and am trying to follow the sample 69 from ADF Code Croner : how-to create a custom LOV using bounded task flows. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/69-custom-lov-with-btf-276178.pdf
I have a problem with the returned value. The correct value is returned in the inputText but it seems that it is just at UI level and that binding layer is not impacted. If user click on next button, all others rows show the same value in the inputText (the value chosen before in the lov), and not the correct value which must be value from db.
How can I solve this problem?
note : opening the 69-sample, jdeveloper ask me to migrate some files (jpr/jws) from previous version of jdeveloper.
Edited by: h0s on 8 oct. 2012 06:14

Yes It happens with the downloaded sample. You can do this test :
Launch EmployeesForm activity -> Open the LOV and select a department -> click next and see that the department id is the same for all rows.
jdeveloper 11.1.2.2.0

Custom method return value will not pass to form

I have created a custom method in my application module that returns a integer value. I am trying to use this value to fetch a row to populate a form. I cannot seem to get the value returned to populate the methodAction binding for the form.
I have no problem displaying the returned value and have no problem populating the form if I hard code a value into the methodAction binding.
I am trying to determine if this is a timing issue on page load, or some other issue with the returned integer.

Hi,
sounds like a lifecycle problem because the method call and execution of the VO iterator happen in the same phase. You can try setting the refresh conditions of the method to prepareModel and the iterator to prepareRender, but I doubt that this will solve the issue.
What is the usecase ? And can the integer be handled within the AM to restrict the query (e.g. to set a ViewCriteria or bind variable)
Frank

RE: (forte-users) Reading return value from Javaprogram

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Mapping of 1st and 2bd program grouping with Employee Details

Hi Experts,
Can you please tell me how to map the employees with the 1st and 2nd program groupings of the Benefit area?
Regards,
Ashish.

Hi,
FPG
   First program groupings are a means of identifying a
   group of employees who share a common set of benefits
   and eligibility criteria. (BENGR)
EX :
   An organization offers one set of benefit plans for
hourly-paid employees and a different set for salaried
employees. Hourly-paid employees may enroll in medical,
dental and life insurance plans after a four month
waiting period. Salaried employees may enroll in
medical, dental, life and vision plans after a one month
waiting period.
SPG
   Second program grouping is a means of subdividing your
   first program groupings depending upon their
   employment status (BSTAT)
EX:
An organization offers one set of benefit plans for full-
time employees and a different set for part-time
employees. Full-time employees may enroll in medical,
dental and life insurance plans after a four month
waiting period. Part-time employees may enroll in
medical, dental, life and vision plans after a one month
waiting period
Regards,
GSR.

How to call a dialog program with return value in another dialog program

Dear All,
How can I call a dialog program with return value from another dialog program?
Regards,
Alok.

Hi Alok,
You can you SET/GET parameters to do this.
This is some information about this.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETERstatements.
To fill one, use:
SET PARAMETER ID pid FIELD f.
This statement saves the contents of field f under the ID pid in the SAP memory. The ID pid can be up to 20 characters long. If there was already a value stored under pid, this statement overwrites it. If you double-click pid in the ABAP Editor, parameters that do not exist can be created as a Repository object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID pid FIELD f.
This statement places the value stored under the pid ID into the variable f. If the system does not find any value for pid in the SAP memory, sy-subrc is set to 4. Otherwise, it sets the value to 0.
Thanks,
SriRatna

Problem with return value of stored function

Hi,
I've made a stored function that insert a new row in a table and return the primary key (see at the end of the message the function script).
In VS 2005 with Visual basic, using the designer, I've created a dataset containing a tableAdapter to be able to use the Pl/SQL function.
My problem is I can't get the proper return value. The VB code below works without error except that I get 0 as value.
What's wrong?
Cheers,
Sebastien
VB code
Dim myAddSession As New ICISDataSetTableAdapters.AddSessionTableAdapter
Dim intSessionId As Integer
intSessionId = myAddSession.ADD_SESSION(tbxUsername.Text, _
tempFolder.Substring(tempFolder.LastIndexOf("\") + 1), _
"toto", Environment.GetEnvironmentVariable("COMPUTERNAME"), _
myLevelAccess.icisUserId, myLevelAccess.levelId)
The debugger tells me that the ADD_SESSION function return value is Object.
add_session PL/SQL script:
CREATE OR REPLACE FUNCTION ICISSEC.add_session (
orausername IN icis_session.ora_user_name%TYPE,
ctxsessionid IN icis_session.ctx_session_id%TYPE,
ctxsessionname IN icis_session.ctx_session_name%TYPE,
ctxservername IN icis_session.ctx_server_name%TYPE,
icisuserid IN icis_session.icis_user_id%TYPE,
startlevelid IN icis_session.start_lvl_id%TYPE
RETURN icis_session.ICIS_SESSION_ID%TYPE
IS
tmpvar icis_session.ICIS_SESSION_ID%TYPE;
BEGIN
INSERT INTO icis_session
(ora_user_name, ctx_session_id, ctx_server_name,
icis_user_id, start_lvl_id, ctx_session_name
VALUES (orausername, ctxsessionid, ctxservername,
icisuserid, startlevelid, ctxsessionname
RETURNING icis_session_id
INTO tmpvar;
COMMIT;
RETURN tmpvar;
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END add_session;

naama wrote:
that if a value is null to convert it to 0 ? . i mean in the part of the declaration of parameter
Nope, can't do that in the signature. You'll need to handle that by validating the passed parameters at the start of the function.
It's simple enough. In your case you might just as well test for NULL and fail the function like this:
    FUNCTION date_post_message(
            user_lock_in IN NUMBER,
            form_type_in IN NUMBER DEFAULT 0 ,
            date_in      IN DATE)
        RETURN BOOLEAN
    IS
        v_num NUMBER(1);
    BEGIN
        dbms_output.put_line('Value of parameters : user_lock_in : '||user_lock_in || ' : form_type_in : '||form_type_in||' : date_in : '||date_in );
        IF user_lock_in = 1 THEN
            RETURN FALSE;
        END IF;
        IF form_type_in IS NULL THEN
            RETURN FALSE;
        ELSIF form_type_in NOT IN (1,2) THEN
            RETURN FALSE;
        END IF;
        RETURN TRUE;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
        RETURN FALSE;
    END;In other use cases I would declare a local variable and process it like this:
        IF form_type_in IS NULL THEN
            l_form_type := 0;
        ELSE
             l_form_type := form_type_in;
        END IF;Obviously the code should use the local variable rather than the parameter.
Validating the values passed in parameters at the start of a function is good practice. If you really want to go to town, read about Design By Contract.
Cheers, APC
Edited by: APC on Nov 9, 2011 1:36 PM
Added example, as requested by OP

PROBLEM IN GIVING RETURN VALUES IN SECOND PROGRAM GROUPING IN BENEFITS MODU

Similar Messages

Maybe you are looking for