Problem in HR abap coding...........

Hi Experts,
here my peace of code.....
START-OF-SELECTION.
GET pernr.
rp-provide-from-frst p9100 space pn-begda pn-endda.
IF 9100-field1 = '02' AND 9100-field2 = ' ' AND 9100-field3 = '00000000'.
here some Move stat.....
rp-provide-from-frst p0185 space pn-begda pn-endda.
endif.
END-OF-SELECTION.
Here my problem is...
data is not coming into IF statment.
until control is there in rp_provide 9100-field1 is having data, but once control will come to IF stat data of 9100-field1 become empty. (here header of 9100 is become clear)
but i want data in IF stat....
how to resolve this ..........
Thanks in Advance,
sudeer.

Hi Friends,
Thanks for ur replays, as u told i have declared infotype.
and am using like p9100-field1 = '02' only , but once control will come to the IF statment then header data is getting clear, so data to check in IF statment.............
as Kiran told, i dont get how to full fill my IF cond with case stat...
any other idia...
Thanks in Advance,
sudeer.

Similar Messages

Abap coding in SAP query (SQ01)

Hi,
By using the a table like for MSEG if i want to retrieve data for the movement type 101 (receipts from vendor), i can build a query using this table and retrieve data - my problem starts when the system shows individual line items instead of cumulated result as mentioned in the following example.
Example :-
for the date 01.07.2007 - i have 10 entries (101 movement) of quantity 1,2,3,4,5,6,7,8,9,10 against a vendor V1. - the query lists all the 10 entries.
But what is required is the cumulated entry against the vendor like shown below
vendor    receipt
V1         55.
What abap coding should be written (provide the sample code) and the where should it be written in the query transaction SQ01
Regards,
M.M

Hi Magesh,
If you do not wish to see the detail lines, then you do not need to create them. Just create the Statistics portion only.
If you wish to see 'summarized Vendor quantity by day', then you might sort on Vendor first, then posting date second. Or, vice versa, depending on your business requirement. I would think that you might also wish to include Material in the sort, since each Material is probably valued differently.
For more info on creating statistics in SAP Query, refer to
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
   Regards,
   Bruce

Abap coding in SQ02

Hello,
Since it's not possible to add IT2051 to the AdHoq Query, I was trying to create an additional structure and wrote a little program for retrieving absence data. The problem I get is that the output only shows results for 1 day and not for the entire period I select in the selection screen of PQAH. Anybody has a suggestion or some information how to add coding properly to SQ02?
Here is the code I used:
Data: pers_avail type table of pdpsp with header line,
      it_pers_avail type table of pdpsp with header line,
      wa_pers_avail like line of pers_avail.
CALL FUNCTION 'HR_READ_TIMEDATA_PSP'
EXPORTING
   BEGIN_DATE                  = PN-BEGDA
   END_DATE                    = PN-ENDDA
    PERSON_ID                   = P0001-PERNR
PERSON_TYP                  = 'P'
RP_BUILD_PSP_ERROR          = ' '
TABLES
    PERS_AVAIL                  = PERS_AVAIL
EXCEPTIONS
NO_CAPACITY_AVAILABLE       = 1
NO_INTEGRATION_ACTIV        = 2
TIMEINFO_ERROR              = 3
OTHERS                      = 4
IF SY-SUBRC = 0.
Loop at Pers_avail.
dailyworkschedule = PERS_AVAIL-tprog.
DAYOFWS = PERS_AVAIL-datum.
Endloop.
Thanks !!
Philip
Else.
Clear dailyworkschedule.
Endif.

Hi,
Wish it was simple as that i am fairly good at queries i do a bit of coding as well on queries, i want to use an inner join for performance reasons. If any1 could help me with that and have used Inner joins ABAP Coding please let me know
Thanks
Adeel

ABAP coding / tables behind IDOC

Hello *,
First some words about the scenario:
I want to design a composite application prototype which aims to replace an existing system.
In the existing application (non-SAP) material master data is periodically (1 x per night) transferred via (customer) IDOC from SAP PLM to the application own database. Real-time read and search functionality is implemented for this database.
Now, with composite application framework, I have the posibility connecting directly (real-time) to the PLM data via entity services. So no redundant keeping of data is necessary.
So now the problem is, that I need the data of the given IDOC but in request/response scenario implemented as an RFC. Am I right?
How can I realize this? Where can I find the ABAP coding behind the IDOC? And the tables and data fields which fill the IDOC?
Can anyone help me? Or are there any good papers/information about IDOCs?
Thanks in advance.
Best regards
Joschi

Hi Joschi,
You can refer some of the links below
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
In your case you need to identify the partner profile and check the details of the partner profile, the inbound process code and the associated FM which writes the data.
Cheers
VJ

ABAP Coding for RFC inputs

Hi,
I am new to ABAP coding. I use the WebDynpro ABAP . In that I need to call a RFC and get the data into the portal. I need to pass some input paramer to RFC. How could I do in the ABAP programming ?
thanks
Suresh

Hi suresh,
What you are asking is a not a wdbdynpro specific doubt but it is more related to abap.So i think you need to get some information about creating and using FM and RFC in abap.
Well i would just try to give you the steps that you should follow.
Step 1) Create a function module by using T CODE se37 make it remote enable i.e make it a RFC (you will ust need to check a radio button in properties tab)
Step 2) In rfc try to define the importing and exporting parameters and write your logic in the coding section.
Step 3) After creating RFC successully now u craete your webdynpro component and create a view inside the component.In view accrding to your business requirement you call this RFC in any of the methods i.e either in hooks methods or your custom methods .And pass the parameters to that rfc and get the results from the rfc.
Well i think i have just given you the overview of the process so while development if get any problem feel free to ask
regards
PG

ABAP coding issues after BW upgrade

Hello Gurus,
We recently did a BW upgrade from version 3.5 to 7.31 and even since have been encountering few strange issues with many of our ABAP coding.
For example, there is an APPEND statement in one of our Update Rules as below:
APPEND <lw_rtab_wa> TO <lt_rtab>.
Before upgrade, this was working as expected and the contents of <lw_rtab_wa> was getting transferred to <lt_rtab> without any issues.
Now after upgrade, we find that the contents of <lw_rtab_wa> is being clubbed together in the 1st few columns of <lt_rtab>.
Both the <lw_rtab_wa> & <lt_rtab> have the same fields, but the length of few fields in <lt_rtab> is bigger than that in <lw_rtab_wa>. For example DOC_NUMBER in <lw_rtab_wa> is of type C(10) while in <lt_rtab> it is C(20). This difference is causing the data of the 2nd field also to be over-writen in the DOC_NUMBER field of <lt_rtab>.
Please let us know if you have encountered similar situations after your BW upgrade. Any possible solutions to this would be very much appreciated as this is causing PROD issues at the moment!
Thanks
Arvind

Hi Arvind,
After Upgrade In BW 7.3 or higher versions All data elements that use the domain RSCHAVL are converted from CHAR60 to SSTRING. thats the reason you are getting that syntax error.
Take help of some ABAP programmer and try to change the syntax as suggested from below link.
Just scroll down and check the same. even though link shows for BW 7.4 issues, its applicable for 7.3 too. Please let me know
http://scn.sap.com/community/data-warehousing/bw/blog/2014/07/28/sap-bw-74-analysis-issues
Thanks
Ajay

ABAP coding in defining start condition for action.

Hi Everybody,
Can anyone tell me if ABAP coding is possible for giving condition for action? If yes, where? Is it in condition editor? I have 3 validations to be done:- 1) Filter service contract (transaction type USC), 2) Filter the active contracts, 3) Filter contracts which doesn't have billing cycle in current month.
So, do you think these validations can be done in start condition of action? First two validations are static in nature and thus can be done. But, how about the last condition?
Please help.
Regards,
Sanj.

Hi Sanj
I would do this.
1. The transaction type cannot be changed, therfore I will set this up in the scheduling condition.
2. Active contracts. Depends on teh definiton of active. If it is based on some status then I will use scheduling condition.
3. use one of the dates in the date profile to determine if the billing date is in the current month or not.
See if this helps.
Thanks

ABAP coding in LSMW

Hi All,
A)Is it possible to write ABAP coding in LSMW, if yes where can we do this. and
B)During the First Step of LSMW we come across 1. Standard/Batch Direct Input
                                                                      2.Batch input recording
                                                                      3.Business Object Method (BAPI)
                                                                      4.IDOC(intermediate document)
which one to use and when to use?
C) what are the advantages/disadvantages of LSMW compared to other data transfer methods like BDC.
please let me know the answers for above.
useful answers will be rewarded for the same.
Regards,
Yellappa.

hi
for q posed to ashvinder, its used only for validation of the input records and their corresponding processing, i will explain a simple scenario,
1. if u want to transfer data a part of which has already been created in the system. You
want to decide at runtime whether the data is created or changed.
u can write this coding in corresponding field
2. You want to "skip" a record depending on a certain condition, i.e. this record shall not be converted and transferred to the output file.
3. Duplicate a Record
If want complex pricing procedures u cant do that in LSMW, u need to go for BDC's
for ur question about what to use, BAPI or IDOC, check this link
http://www.sap-img.com/abap/ale-bapi.htm
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1089362,00.html?bucket=ETA&topic=299357
award points if found helpful
Message was edited by:
        Rahul Kavuri

Can any provide me problem issues on ABAP dictionary for practice?

Or any one can tell me the links in which problem issues on ABAP dictionary is there?
Moderator message : Don't ask for links & solution to vague requirements. Thread locked.
Edited by: Vinod Kumar on Jun 14, 2011 9:36 AM

Hi jessculter,
Thanks for your post.
I am sorry to hear about the problems you have been having lately.
Please send me in your details using the "Contact The Mods" link found in my profile and I will take it from there.
Cheers,
OlgaC
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Performance of ABAP coding very poor

Hi gurus,
I'm a newbie in ABAP programming.
Currently, I managed to write an ABAP coding for BW to load data from a source DSO to target DSO.
We are using BW 3.5.
In the source, we have YTD amount as Key Figures.
In the start routine, we use ABAP coding to calculate the Monthly value and Last 12 Months value.
Monthly value is defined as: current month YTD - last month YTD (except when current month = January, then monthly value for January = YTD value for January)
Last 12 months value is calculated for example as follow:
for March 08, then Last 12 months value is April 07-March08
Thus the formula for last 12 Months value is:
           YTD current month current year + YTD month12 last year - YTD current month last year
I used internal table to read and store all of the information
However, I need to read 3 times from internal table to get all of the necessary value to calculate the monthly value and last 12 months value.
The performance is very low. The system runs for 40 minutes to read and calculate 15500 data.
Therefore if you can perhaps give some hint/tip/tricks how to improve the performance of the code, it will be highly appreciated.
Thank you very much in advance.
Best regards,
Fen
My code is as follow:
Define internal table to hold last year & current year data:
DATA: LCYEARDATA type sorted table of /bic/aZABC3_O00
        with unique key /BIC/ZABC_ENTI /BIC/ZABC_ACC
        /BIC/ZABC_SUBA /BIC/ZABC_VERS CALMONTH
        with header line.
Create variables needed to hold last month/year values.
DATA: CALMONTHLOW TYPE /BI0/OICALMONTH.
DATA: CALMONTHHIGH TYPE /BI0/OICALMONTH.
DATA: CALYEARTHISYEAR TYPE /BI0/OICALYEAR.
DATA: CALYEARLASTYEAR TYPE /BI0/OICALYEAR.
DATA: CURRENTMONTH TYPE /BI0/OICALMONTH2.
DATA: CURRENTMONTHLASTYEAR TYPE /BI0/OICALMONTH.
DATA: LASTMONTH TYPE /BI0/OICALMONTH.
DATA: CALMONTH12LASTYEAR TYPE /BI0/OICALMONTH.
DATA: LASTMOYTD type /BI0/OIAMOUNT.
DATA: LAST12MONTH TYPE /BI0/OIAMOUNT.
DATA: YTDLASTYEAR type /BI0/OIAMOUNT.
DATA: FIRSTRUN type N.
DATA: MONTHLYVALUE type /BI0/OIAMOUNT.
DATA: YTDMONTHLASTYEAR type /BI0/OIAMOUNT.
DATA: AMOUNT type /BI0/OIAMOUNT.
Set initial value of all variables to 0.
CALMONTHLOW = 0.
CALMONTHHIGH = 0.
CALYEARTHISYEAR = 0.
CALYEARLASTYEAR = 0.
CURRENTMONTH = 0.
CURRENTMONTHLASTYEAR = 0.
LASTMONTH = 0.
LASTMOYTD = 0.
LAST12MONTH = 0.
YTDLASTYEAR = 0.
YTDMONTHLASTYEAR = 0.
FIRSTRUN = 0.
MONTHLYVALUE = 0.
CALMONTH12LASTYEAR = 0.
Loop through data package.
LOOP AT DATA_PACKAGE.
    IF DATA_PACKAGE IS NOT INITIAL.
First run:
      IF FIRSTRUN = 0.
Get current year from any line in the data package.
        CALYEARTHISYEAR = DATA_PACKAGE-CALMONTH(4).
        FIRSTRUN = 1.
      ENDIF.
Calculate last year (i.e. data package year - 1).
        CALYEARLASTYEAR = CALYEARTHISYEAR - 1.
Calculate current month
        CURRENTMONTH = DATA_PACKAGE-CALMONTH+4(2).
*Set CALMONTHLOW and CALMONTHHIGH as time period to fill the internal
*table:
        CONCATENATE CALYEARLASTYEAR CURRENTMONTH INTO CALMONTHLOW.
        CONCATENATE CALYEARTHISYEAR CURRENTMONTH INTO CALMONTHHIGH.
Fill internal table with Last Years data and Current Year data:
        select *
          from /bic/aABC2_O00
          into table LCYEARDATA
          WHERE CALMONTH >= CALMONTHLOW
            AND CALMONTH <= CALMONTHHIGH
            AND /BIC/ZABC_ENTI = DATA_PACKAGE-/BIC/ZABC_ENTI
            AND /BIC/ZABC_ACC = DATA_PACKAGE-/BIC/ZABC_ACC
            AND /BIC/ZABC_SUBA = DATA_PACKAGE-/BIC/ZABC_SUBA
            AND /BIC/ZABC_VERS = DATA_PACKAGE-/BIC/ZABC_VERS.
Continue with the looping
Get last month from current month.
        LASTMONTH = DATA_PACKAGE-CALMONTH - 1.
*CHECK IF CURRENTMONTH = JAN then LastmonthYTD amount = 0, else read
*from the internal table.
*CURRENTMONTH = DATA_PACKAGE-CALMONTH+4(2). (this variable has been set
*above)
        IF CURRENTMONTH = '01'.
          LASTMOYTD = 0.
        ELSE.
          READ TABLE LCYEARDATA
            WITH KEY
            /BIC/ZABC_ENTI = DATA_PACKAGE-/BIC/ZABC_ENTI
            /BIC/ZABC_ACC = DATA_PACKAGE-/BIC/ZABC_ACC
            /BIC/ZABC_SUBA = DATA_PACKAGE-/BIC/ZABC_SUBA
            /BIC/ZABC_VERS = DATA_PACKAGE-/BIC/ZABC_VERS
              CALMONTH = LASTMONTH.
          IF sy-subrc IS INITIAL.
            LASTMOYTD = LCYEARDATA-AMOUNT.
          ENDIF.
        ENDIF.
*Calculate Monhtly value for this month (to later be stored in data
*package)
        MONTHLYVALUE = DATA_PACKAGE-AMOUNT - LASTMOYTD.
Count value for Last 12 Months:
1: Get the YTD Month12 Last Year & YTD CurrentMonth Last Year.
        CONCATENATE CALYEARLASTYEAR CURRENTMONTH INTO
        CURRENTMONTHLASTYEAR.
        CONCATENATE CALYEARLASTYEAR '12' INTO CALMONTH12LASTYEAR.
        READ TABLE LCYEARDATA
           WITH KEY
            /BIC/ZABC_ENTI = DATA_PACKAGE-/BIC/ZABC_ENTI
            /BIC/ZABC_ACC = DATA_PACKAGE-/BIC/ZABC_ACC
            /BIC/ZABC_SUBA = DATA_PACKAGE-/BIC/ZABC_SUBA
            /BIC/ZABC_VERS = DATA_PACKAGE-/BIC/ZABC_VERS
             CALMONTH = CALMONTH12LASTYEAR.
        IF sy-subrc IS INITIAL.
          YTDLASTYEAR = LCYEARDATA-AMOUNT.
        ENDIF.
        READ TABLE LCYEARDATA
          WITH KEY
            /BIC/ZABC_ENTI = DATA_PACKAGE-/BIC/ZABC_ENTI
            /BIC/ZABC_ACC = DATA_PACKAGE-/BIC/ZABC_ACC
            /BIC/ZABC_SUBA = DATA_PACKAGE-/BIC/ZABC_SUBA
            /BIC/ZABC_VERS = DATA_PACKAGE-/BIC/ZABC_VERS
            CALMONTH = CURRENTMONTHLASTYEAR.
        IF sy-subrc IS INITIAL.
          YTDMONTHLASTYEAR = LCYEARDATA-AMOUNT.
        ENDIF.
2. Specify YTD This month.
    AMOUNT = DATA_PACKAGE-AMOUNT.
*3: Last 12 Months = (YTD Last Year - YTD Month Last Year) + YTD This
*Month
       LAST12MONTH = YTDLASTYEAR - YTDMONTHLASTYEAR + YTDTHISMONTH.
       LAST12MONTH = YTDLASTYEAR - YTDMONTHLASTYEAR + AMOUNT.
Save MONTHLYVALUE and LAST12MONTH to the DATA_PACKAGE.
        DATA_PACKAGE-/BIC/ZAMTMO = MONTHLYVALUE.
        DATA_PACKAGE-/BIC/ZAMTLTM = LAST12MONTH.
        modify DATA_PACKAGE.
        ENDIF.
      ENDLOOP.
    ABORT = 0.

Hi,
Just check these blogs to improve performance...
The SQL Trace (ST05) u2013 Quick and Easy
The SQL Trace (ST05) Quick and Easy
The ABAP Runtime Trace (SE30) - Quick and Easy
The ABAP Runtime Trace (SE30) - Quick and Easy
Regards,
Sachin

Docs for ABAP coding for BW

Hello Gurus,
I need some documents or links where i can find enough info to learn abt ABAP coding in transfer, update rules, ABAP routine in infopackage and in the start routine etc. Can any one help me with this?
Looking for some basic concepts of ABAP.
Thank you,
Kumar
[email protected]

Hi,
Please check the following links that may be useful for you.
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/60cecb1d-0a01-0010-8289-b14fd99062fa
http://www.bwexpertonline.com/downloads/ABAPCodeforRuvinskyarticle.doc
http://www.bwexpertonline.com/downloads/Extractor_Source_Code.doc
http://www.bwexpertonline.com/downloads/Nissen.doc
https://www.sdn.sap.com/irj/sdn/abap
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
Regards,
®

Back ground job needed to scheduled immedietly using ABAP coding

is there anything in ABAP coding in JOB_OPEN and JOB_SUBMIT, i can trigger immedtiely ,i need not to goto SM#& and do manualy
please help me in this
thanking you 'sridhar

Hi,
I use parameter STRTIMMED with function module JOB_CLOSE.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = local_job-jobname
    IMPORTING
      jobcount         = local_job-jobcount
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
SUBMIT abap
          WITH param = p_param AND RETURN TO SAP-SPOOL
                VIA JOB local_job-jobname NUMBER local_job-jobcount
              WITHOUT SPOOL DYNPRO
              DESTINATION 'ZMD'
              IMMEDIATELY ' '
              KEEP IN SPOOL 'X'.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = local_job-jobcount
        jobname              = local_job-jobname
        strtimmed            = 'X'
        targetserver         = w_sys
Cheers
Allan

ABAP-Coding for EVERY Key figure in infocube 0RT_C02

Hello gurus;
      Does anybody know which is the reason for Abap-coding for every key figure in infocube 0rt_c02 from InfoSource 2lis_13_vditm?
Thanks in advanced!
Csr

Hi,
this is done like this in the business content because the extractor is providing the data with a process key; this process key is then translated into meaningfull business objects (key figures);
fro instance ProcessKey 202 in application SD is reflecting Credit memos:
* Credit Memo
IF COMM_STRUCTURE-PROCESSKEY = '202'
    AND COMM_STRUCTURE-BWAPPLNM EQ 'SD'.
* currency convert
    IF COMM_STRUCTURE-COST <> 0.       "Value in document UNIT
      PERFORM LOC_CURR_CONVERT
        USING    COMM_STRUCTURE-COST   "Value in doc UNIT
                 COMM_STRUCTURE-TRANS_DATE     "Date for exchange
                 COMM_STRUCTURE-DOC_CURRCY     "Document Currency
                 COMM_STRUCTURE-LOC_CURRCY     "Local currency
*                COMM_STRUCTURE-EXCHG_RATE     "Exchanging rate
                 COMM_STRUCTURE-/BIC/ZEXRATEAC "Exchanging rate Acctn
        CHANGING RESULT.
* the KPI's must be turned to positive because the SD-extractors
* allways deliver them neg. if it's a process back (e.g. return order)
      RESULT = RESULT * ( -1 ).
      UNIT = COMM_STRUCTURE-LOC_CURRCY.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    ELSE.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 4.
    ENDIF.
ELSE.
* if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
the above routine is quite self explaining the code.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Difference between 3X and 7X routine in term of ABAP coding

Hi to all,
Please can any one tell me?
What is difference between 3X and 7X routine, in technical aspect (ABAP coding).
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi Rana,
Check the below link
[Differences in Routine Concepts in BW3.x n Bi7.0|http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bd9b5be97c112ce10000000a11466f/content.htm]
Regards
KP

How to use API to trigger JAM group invitation in ABAP coding?

Hi,
We want to trigger a JAM group invitation URL to be sent out in ABAP coding to enable a auto. process at backend. Currently I only know the manual way: clicking invite button in jam group and input user name to find target user and then click send button to send out invitation email.
But question is how to do in ABAP coding to call any API to realize the same action?
Many thanks and Best regards,
Long

As an ABAP developer you can make use of the SAIL Library to integrate with SAP Jam. With SAIL integrating with SAP Jam is as easy as calling a ABAP OO method. SAIL takes care of the communication with SAP Jam and handles user authentication for you.
The lower part of http://scn.sap.com/docs/DOC-55050 contains information for ABAP developers like the SAIL developer guide and the SAIL config guide.

Problem in HR abap coding...........

Similar Messages

Maybe you are looking for