Problem in idoc to file mapping

Hi Experts,
I am doing a idoc to file scenario...
There is a single idoc with multiple header and line items .
I am using multi mapping for header and lineitems.
The problem i am facing is regarding the occurences in target strucure...
at which level they should be specified so all the headers come in one strucure and line items in another...or should the occurences be o to unbounded at each field level.
Kindly help me regarding the same ...

hi
i have the same scenario : IDOC (orders) to Flat File. can you plz help in mapping. the input format to XI is in the given way
idoc
    a1---(0-1)
    a2---(0-1)
       b1--
    a3---(0-1)
       b1---(0-n)
         c1---
       b2---
         c1---
    a3---(0-n)
       b1---
       b2---
    a3---
      b1---
      b2---
    a3
      b1---
      b2---
i have created the same output DT in the same format (parent-child) for flat file. and my questions are
1. is that correct, do i need to create the same DT as the above idoc (like parent and child) or different?
2. how to map the idoc fields to my file DT..do i need to map parent to parent and child to child...or different.
plz help me out
Thanks
ram

Similar Messages

Mapping Problem. Idoc to file senerio...

Hi XI Gurus
I need a help.
I have an idoc.The output is papped to a file , this being a IDOC to File senerio. The Idoc contains segmnent1,2,3,4,5,6,7.The occurance of segment 7 is optional.It may come, it may not come. If segment 7 comes then there is a field callled mwskz which would contain 2 digits, say 'D1', or 'D2' or D3' or 'D4' or D5' or 'D6' or D7'or 'F8' or D9'. The file has a mapping, where there are 9 fields [ say F1, f2, f3, f4, f5, f6, f7, f8, and f9 ] in the ROOT. If at any instance, for a given segment 1, there is a segment7, then the contents of the fields MWSKZ is mapped based on it's content , say if the content ofnwskz is D6 then all fields from F1 - F9 would be populated by the constant term 'N' except for the field 'F6' which would contain 'Y'.
I have done a mapping, but it is failing...
I have used, remove contexts for the field as well as segment . I have use the function exists...but, after putting PAYLOASD, what I can see is, the mapping of the occurance of SEGMENT7 is not synchronised with field mwskz.
Experts Pls help.
Pls send me ur email address so that I can show u the screen-shots of the mapping !!!!
Many Thanks in Advance
Arnab
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from using email correspondence as the main objective of the Forums is to share knowledge.
SDN PI/XI Forum Moderator

Hi Arnab,
If i have understood your requirement correctly, you need to duplicate your ROOT node which has fields f1.. f9 for 9 times and map it to a constant. Now you can provide the condition like this:
mwskz = D6-> createIf -> ROOT
and so on....
In the ROOT segment now you can directly map the fields f1 to f9 as per the requirement, i.e., f1 to f5 and f7 to f9 can be mapped to N directly and f6 can be mapped to Y.
Correct me if i have misunderstood your requirement.
Regards,
Sanjeev.

IDOC to File Mapping problem.

Hi all,
I am working on IDOC to file scenario. Here I need to create CSV file for some fields of the IDOC. Actually flat file should contain around 65 comma separated fields irrespective (independent of the segment presence in the IDOC) of the existence of the corresponding filed in the idoc structure. So could you please tell me how to handle this situation?
Here file is supposed to be created with 65 fields. But it only contains few of those, as some segments in the IDOC are missing. Is there any dependency between the filed and its header/segment?
Thanks in advance,
-Kanth.

Hi Prasad,
But it only contains few of those, as some segments in the IDOC are missing. Is there any dependency between the filed and its header/segment? - yes, if your source IDOC is having some segments missing, then your target will not have those segments, so some of your target data will be lost.......
To avoid this you can go for a JAVA mapping.....
Thanks,
Rajeev Gupta

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Problem with IDOC TO FILE Scenario

Hi Experts,
I am doing IDOC TO FILE Scenario.
I have done all the configuration.I have cretaed RFC,PORT,LS and Partner profile at both R/3 and
XI Side.
when I am trying to generate IDOC using we19 and I put the r/3 port,partner in sender and XI
port and partner in receiver it gives me error as "Port 'SAPCU6_100' does not exist in the table
of port descriptions.
Please help me.....
Regards

HI Saras,
Please go through the below weblog which has all the stpes which is required for ur scenario...I think screen by screen help u to debug ur problem and it will help u to find out the msitake which u have made.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Idoc to file mapping

hi
i have a scenario : IDOC (orders) to Flat File. can you guys plz help in mapping.
the input format to XI is in the given way
idoc
a1---(0-1)
a2---(0-1)
b1--
a3---(0-1)
b1---(0-n)
c1---
b2---
c1---
a3---(0-n)
b1---
b2---
a3---
b1---
b2---
a3
b1---
b2---
i have created the same output DT in the same format (parent-child) for flat file. and my questions are
1. is that correct, do i need to create the same MT as the above idoc (like parent and child) or different?
2. how to map the idoc fields to my file MT segnments.do i need to map parent to parent and child to child...or different way
plz help me out
Thanks
ram

the give below is more clear form
idoc
a1---(0-1)
a2---(0-1)
b1--
a3---(0-1)
b1---(0-n)
c1---
b2---
c1---
a3---(0-n)
b1---
b2---
a3---
b1---
b2---
a3
b1---
b2---
Thanks
ram

Splitting multiple IDoc XML files into single IDoc messages for R/3

Hi all. I have a problem splitting IDoc XML files coming in to XI. I currently have an interface that takes in single store sale IDoc transactions (type WPUBON01) in an IDoc XML file. I then have some complex graphical mapping on the IDoc before sending to R/3 via the IDoc adapter. This works fine. However, we now wish to include multiple sales in one file i.e. many WPUBON01 IDocs. I could use message splitting to do this BUT the mapping is so complex, I do not wish to have to change it to enable the processing of many IDocs in one file instead of just one.
What I want to do: have one mapping splitting a multiple IDoc XML file into single IDoc messages and then another taking these single messages as before and performing the mapping. I cannot find a way to do this in one interface; the main problem I'm having is getting XI to split the multiple IDocs into many single IDoc messages within XI itself. I'd be very grateful for any advice on the best way to do this.
Thankyou.
Stuart Richards (Halfords, UK)

Bhavesh,
Thanks again for a clear explanation... I'm moving forwards but still struggling. I've been on this all afternoon today (after a break on other things) and just cannot get my message to split properly (though the SOAP adapter problem I had earlier is now fixed!). If my initial IDoc XML file contains this format:
<WPUBON01><IDOC>....</IDOC>
<IDOC>....</IDOC>
<IDOC>....</IDOC></WPUBON01>
.. I'm not sure what the cardinaility on the first message mapping and interface mapping should be. I'd have thought the source interface would be 1 and the target would be 0..unbounded but this isn't working. I'm trying different things but I get different errors each time. Currently, I have the above cardinality in my first interface and I'm passing in the following data:
<WPUBON01><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832292</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160633</VORGZEIT><BONNUMMER>1001</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1001</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832293</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1002</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1002</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832294</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1003</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1003</ZUONR></E1WPB06></E1WPB01></IDOC></WPUBON01>
In the message monitor, I get a chequered flag. Great. However, I get the dreaded error 500 in the SOAP receiver comm channel:
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Exception caught by adapter framework: SOAP Error
Delivery of the message to the application using connection AFW failed, due to: SOAP Error.
Any ideas as to what this might be?! I'm getting there.... if I get a solution out of this, I promise to write the blog myself!
Cheers
Stuart

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Mapping problem: IDOC - XI - File

Hi,
in my scenario (Z-IDOC - XI - File) I have problems with the mapping:
Z-IDOC :
ZFIBUCH1
_IDOC
___Begin
___EDI_DC40
___Z1L061 (0..999999999)
_____Z1L062 (0..999999999)
example
L061 18000 DE 0101 23236318 050605 EUR
__L062 18000 XXX XXX
__L062 18000 XX1 CCC3
L061 87000 DE 0101 050605 EUR
__L062 87000 XXX XXX
__L062 87000 XX1 XAA4
the result should look like this :
L061 18000 DE 0101 23236318 050605 EUR
L062 18000 XXX XXX
L062 18000 XX1 CCC3
L061 87000 DE 0101 050605 EUR
L062 87000 XXX XXX
L062 87000 XX1 XAA4
I tried the following (target)-data types in the mapping but nothing didnt work very well :
MT_ZIFUCH_FILE
__ row
_____L061
_______L062
or
MT_ZIFUCH_FILE
__ row
_____L061
_____L062
or
MT_ZIFUCH_FILE
_____L061
_____L062
Do I need here a BPM? Or should I use XSLT-Mapping??
Or knows somebody a easyer way?
Regards
Christoph

Hi,
As per my understanding to have a flat file struture you would require a flat structure at the target side.One similar to the second structure mentioned by you.
DT_Target
|_Header
|______L61.....segment (child of header)
|______L62.....segment (child of header)
Using the mapping we convert the idoc structure to flat structure and then use content conversion like this :
Recordset structure : L61,L62
L61.fieldSeparator = ,(for you this value should be space)
L62.fieldSeparator = ,
I have not been able to convert the Target hierarchial structure to a flat file via content conversion.
when i tried I got the values as
L61,1800,...EUR,L62,8700,......
Hope this helps,
Regards,
Sulakshana

IDOC- XI- FILE(s) 1..n mapping problem

I am working on a IDOC->XI->FILES scenario and am stuck on mapping of idoc segments to output structure.
IDOC structure is as following,
WBBDLD05 (1..1)
 IDOC (1..1)
 EDI_DC40 (1..1)
 E1WBB01 (1..10000) ...
so the idoc being sent has multiple E1WBB01 segments, i need to do some content check for each E1WBB01 segment and create files based on thats. (ie. if there are 10 of E1WBB01 segments that meets a condition like "E1WBB02:ATTYP = 01", then i should create a file with 10 lines, and if there are 5 segments that meets "E1WBB01.E1WBB02:ATTYP = 00 or 02" condition , then i need to ALSO create another file with another structure with 5 lines)
i intend to use ccbpm as i find it easier to manipulate control steps. So far i am able to receive abstract idoc message interface, but as i am stuck on this mapping issue, i am not able to use the transformation step for checking content of each E1WBB01 data.
thank you in advance for any help

u wud need to loop thru to check for all the contents and have them transformed accordingly. u can check with block . but before that have E1WBB01 into a multiline interface and then use this interface in the transformation step.
Message Mapping
SOURCE TARGET
WBBDLD05 (1..1)
IDOC (1..1)
EDI_DC40 (1..1)
E1WBB01 (1..10000)---------------------------MI_E1WBB01

Mapping Problem ( IDoc to File )

Hi,
I am working on Idoc to file scenario...My input and output structures like below...
Idoc:
ZOrderInfo 1----99999
 OrderNumber 0---1
 ZItem 1----99999
 Quantity 0---1
File:
Item
 OrderNumber 0-1
 Quantity 0-1
Problem : I need to produce Item nodes in output structure based on OrderNumber. like for 4 order numbers in source need to 4 Item segments.
a) Summation: If any duplicate Ordernumber comes in picture...we need to omit that and need to take the quantity from that...do summation and send to target.
like OrderNumber -1...quantity -10 and Ordernumber -1 ....quantity -20
Need to produce only one ordernumber -1 with the quantity of 10+20 =30.
b) If the Ordernumber not present in any segment....Need to pass the quantity as is...
any suggestions would be appreciated.
-Esha.

Sunil,
Note: In this input Idoc - It has 3 segments, 2 segments have same ordernumber and 1 segment doesn't have order number.
And I am expecting two Item nodes in output structure - One with quantities summation (500 +500 =1000) for the same order number and One with no ordernumber and quantity as is (600).
Hope my requirements clear to you! Please help me with the valueable suggestions!
My input structure - IDoc:
<?xml version="1.0" encoding="UTF-8"?>
<ZORDR01>
 <IDOC BEGIN="">
 <EDI_DC40 SEGMENT="">
 <TABNAM/>
 <MANDT/>
 <DOCNUM/>
 <DOCREL/>
 <STATUS/>
 <DIRECT/>
 <OUTMOD/>
 <EXPRSS/>
 <TEST/>
 <IDOCTYP/>
 <CIMTYP/>
 <MESTYP/>
 <MESCOD/>
 <MESFCT/>
 <STD/>
 <STDVRS/>
 <STDMES/>
 <SNDPOR/>
 <SNDPRT/>
 <SNDPFC/>
 <SNDPRN/>
 <SNDSAD/>
 <SNDLAD/>
 <RCVPOR/>
 <RCVPRT/>
 <RCVPFC/>
 <RCVPRN/>
 <RCVSAD/>
 <RCVLAD/>
 <CREDAT>20080310</CREDAT>
 <CRETIM>104301</CRETIM>
 <REFINT/>
 <REFGRP/>
 <REFMES/>
 <ARCKEY/>
 <SERIAL/>
 </EDI_DC40>
 <Z1ORDAPH SEGMENT="">
 <ORDNO>1234567890</ORDNO>
 <DATE/>
 <Z1ORDAPL SEGMENT="">
 <ORDAPQTY>500</ORDAPQTY>
 </Z1ORDAPL>
 </Z1ORDAPH>
 <Z1ORDAPH SEGMENT="">
 <DATE/>
 <Z1ORDAPL SEGMENT="">
 <ORDAPQTY>600</ORDAPQTY>
 </Z1ORDAPL>
 </Z1ORDAPH>
 <Z1ORDAPH SEGMENT="">
 <ORDNO>1234567890</ORDNO>
 <DATE/>
 <Z1ORDAPL SEGMENT="">
 <ORDAPQTY>500</ORDAPQTY>
 </Z1ORDAPL>
 </Z1ORDAPH>
 </IDOC>
</ZORDR01>

IDoc to File scenario Monitoring Problem

Hi,
I have a problem in monitoring. In my IDoc to file scenario the ftp server is not reachable (wrong ip) but still in sxmb_moni I get a successful processed message with acknowledgement system error.
Now, why dont I get an normal error in sxmb_moni?
Thanks in advance...

Hi,
>>Now, why dont I get an normal error in sxmb_moni?
Why because in MONI we generally get the Errors related to the Message Processing like mapping, and pipe line Services.
But the error which u got is related to the Receiver, so this we can find out in the Receiver File Adapter monitoring( CC monitoring)
MONI Shows the Errors those are related to the ABAP Satck means if any Errors occurs while going the process on ABAP Stack
But the error which u got is on Adapter Engine Process, so Definately the Error finding place is on Receiver CC monitoring
REgards
Seshagiri
Edited by: N V Seshagiri on Sep 26, 2008 1:17 PM

Problem adapter idoc - file ATTRIBUTE_INV_SND_SERV

Hello All,
please help me for my problem on adapter in my system XI for a scenario idoc -> file an I have an message error.
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BS_ADONIX</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service BS_ADONIX to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help if you have some idea BS_ADONIx is a business service.
Thanks for your reply

Steps IDOC to File.
IN IR
1. Import the IDOC in XI (input).
2. Create a Data type of (output) i.e. file.
3. Create a Message type of (output) i.e. file used the above data type.i.e.Step 2
4. Create a Message interface of(output) .i.e file used the above messagetype. i.e.Step3.
5. create Mappping select source as IDOC and target as Message type you created.
6, In Interface mapping select source as IDOC and Target Interface Message Interface of file i.e.Step 4.
In ID.
Select the recevier determination of .
1.select sender system as R/3 system recivr as File Bunisees system
2. create interface determination select sender system as R/3 Sender interface as IDOC . in interface determination select inbound message whihc createdin step 4
and message interface we created in step 5.
3. create recevier determination sender r/3 interface IDOC and reciver File business system . so create reciver file adapter and assign to file business system
Please reward points
Thanks
Sreeram.G.Reddy

Context handling in message mapping for an IDoc to File Scenario

Hi,
Can somebody help me with this issue. I have an Idoc to file scenario. heres my idoc structure. Its a custom Idoc
Header (1..1)
Detail (0..Unbounded)
         DependentDetail (0...Unbounded)              Note: This dependentdetail is a subelement of Detail
Trailer(1...1)
I created my target structrure the same way as the Idoc structure.
My output is a simple text file. I need the output in this format
Header
Detail1
   Dependentdetail1
   DependentDetail2
   DependentDetail3
Detail2
   DependentDetail1
   Dependentdetail2
Detail3
Detail4
Trailer
Since the Detail and Dependent Detail records are unbounded .
But right now i m getting my output like this:
Header
Detail1
Detail2
Detail3
Detail4
Trailer
But the DependentDetail record in not showing up in the output file. I didnot do any context change in my mapping. So do I need to do any context handling??...If so can somebody explain me with this.
Thanks,
Adam
Edited by: hymanroth on Apr 29, 2011 11:11 PM

Thanks Kenneth foryour quick reply,
Yes, I see the payload for Dependent detail in SXMB_MONI. So as you said earlier there's a problem with my content conversion.
my content conversion is as follows:
Header.fieldNames
Header.fieldFixedLengths
Header.endSeparator
Detail.fieldNames
Detail.fieldFixedLengths
Detail.endSeparator
DependentDetail.fieldNames
DependentDetail.fieldFixedLengths
DependentDetail.endSeparator
Trailer.fieldNames
Trailer.fieldFixedLengths
Trailer.endSeparator
So As I told earlier. With the above content conversion. I am not able to get the Dependent detail record in my output file. So If there is a change in my content conversion can u check it and tell me where I went wrong.
Thanks,
Harsh
Edited by: hymanroth on May 2, 2011 7:03 PM

Problem in idoc to file mapping

Similar Messages

Maybe you are looking for